| /* |
| * RTC driver for Rockchip RK808 |
| * |
| * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd |
| * |
| * Author: Chris Zhong <zyw@rock-chips.com> |
| * Author: Zhang Qing <zhangqing@rock-chips.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/rtc.h> |
| #include <linux/bcd.h> |
| #include <linux/mfd/rk808.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| |
| /* RTC_CTRL_REG bitfields */ |
| #define BIT_RTC_CTRL_REG_STOP_RTC_M BIT(0) |
| |
| /* RK808 has a shadowed register for saving a "frozen" RTC time. |
| * When user setting "GET_TIME" to 1, the time will save in this shadowed |
| * register. If set "READSEL" to 1, user read rtc time register, actually |
| * get the time of that moment. If we need the real time, clr this bit. |
| */ |
| #define BIT_RTC_CTRL_REG_RTC_GET_TIME BIT(6) |
| #define BIT_RTC_CTRL_REG_RTC_READSEL_M BIT(7) |
| #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M BIT(3) |
| #define RTC_STATUS_MASK 0xFE |
| |
| #define SECONDS_REG_MSK 0x7F |
| #define MINUTES_REG_MAK 0x7F |
| #define HOURS_REG_MSK 0x3F |
| #define DAYS_REG_MSK 0x3F |
| #define MONTHS_REG_MSK 0x1F |
| #define YEARS_REG_MSK 0xFF |
| #define WEEKS_REG_MSK 0x7 |
| |
| /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ |
| |
| #define NUM_TIME_REGS (RK808_WEEKS_REG - RK808_SECONDS_REG + 1) |
| #define NUM_ALARM_REGS (RK808_ALARM_YEARS_REG - RK808_ALARM_SECONDS_REG + 1) |
| |
| struct rk808_rtc { |
| struct rk808 *rk808; |
| struct rtc_device *rtc; |
| int irq; |
| }; |
| |
| /* |
| * The Rockchip calendar used by the RK808 counts November with 31 days. We use |
| * these translation functions to convert its dates to/from the Gregorian |
| * calendar used by the rest of the world. We arbitrarily define Jan 1st, 2016 |
| * as the day when both calendars were in sync, and treat all other dates |
| * relative to that. |
| * NOTE: Other system software (e.g. firmware) that reads the same hardware must |
| * implement this exact same conversion algorithm, with the same anchor date. |
| */ |
| static time64_t nov2dec_transitions(struct rtc_time *tm) |
| { |
| return (tm->tm_year + 1900) - 2016 + (tm->tm_mon + 1 > 11 ? 1 : 0); |
| } |
| |
| static void rockchip_to_gregorian(struct rtc_time *tm) |
| { |
| /* If it's Nov 31st, rtc_tm_to_time64() will count that like Dec 1st */ |
| time64_t time = rtc_tm_to_time64(tm); |
| rtc_time64_to_tm(time + nov2dec_transitions(tm) * 86400, tm); |
| } |
| |
| static void gregorian_to_rockchip(struct rtc_time *tm) |
| { |
| time64_t extra_days = nov2dec_transitions(tm); |
| time64_t time = rtc_tm_to_time64(tm); |
| rtc_time64_to_tm(time - extra_days * 86400, tm); |
| |
| /* Compensate if we went back over Nov 31st (will work up to 2381) */ |
| if (nov2dec_transitions(tm) < extra_days) { |
| if (tm->tm_mon + 1 == 11) |
| tm->tm_mday++; /* This may result in 31! */ |
| else |
| rtc_time64_to_tm(time - (extra_days - 1) * 86400, tm); |
| } |
| } |
| |
| /* Read current time and date in RTC */ |
| static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm) |
| { |
| struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev); |
| struct rk808 *rk808 = rk808_rtc->rk808; |
| u8 rtc_data[NUM_TIME_REGS]; |
| int ret; |
| |
| /* Force an update of the shadowed registers right now */ |
| ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG, |
| BIT_RTC_CTRL_REG_RTC_GET_TIME, |
| BIT_RTC_CTRL_REG_RTC_GET_TIME); |
| if (ret) { |
| dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * After we set the GET_TIME bit, the rtc time can't be read |
| * immediately. So we should wait up to 31.25 us, about one cycle of |
| * 32khz. If we clear the GET_TIME bit here, the time of i2c transfer |
| * certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency. |
| */ |
| ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG, |
| BIT_RTC_CTRL_REG_RTC_GET_TIME, |
| 0); |
| if (ret) { |
| dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_bulk_read(rk808->regmap, RK808_SECONDS_REG, |
| rtc_data, NUM_TIME_REGS); |
| if (ret) { |
| dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret); |
| return ret; |
| } |
| |
| tm->tm_sec = bcd2bin(rtc_data[0] & SECONDS_REG_MSK); |
| tm->tm_min = bcd2bin(rtc_data[1] & MINUTES_REG_MAK); |
| tm->tm_hour = bcd2bin(rtc_data[2] & HOURS_REG_MSK); |
| tm->tm_mday = bcd2bin(rtc_data[3] & DAYS_REG_MSK); |
| tm->tm_mon = (bcd2bin(rtc_data[4] & MONTHS_REG_MSK)) - 1; |
| tm->tm_year = (bcd2bin(rtc_data[5] & YEARS_REG_MSK)) + 100; |
| tm->tm_wday = bcd2bin(rtc_data[6] & WEEKS_REG_MSK); |
| rockchip_to_gregorian(tm); |
| dev_dbg(dev, "RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n", |
| 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday, |
| tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec); |
| |
| return ret; |
| } |
| |
| /* Set current time and date in RTC */ |
| static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev); |
| struct rk808 *rk808 = rk808_rtc->rk808; |
| u8 rtc_data[NUM_TIME_REGS]; |
| int ret; |
| |
| dev_dbg(dev, "set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n", |
| 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday, |
| tm->tm_wday, tm->tm_hour, tm->tm_min, tm->tm_sec); |
| gregorian_to_rockchip(tm); |
| rtc_data[0] = bin2bcd(tm->tm_sec); |
| rtc_data[1] = bin2bcd(tm->tm_min); |
| rtc_data[2] = bin2bcd(tm->tm_hour); |
| rtc_data[3] = bin2bcd(tm->tm_mday); |
| rtc_data[4] = bin2bcd(tm->tm_mon + 1); |
| rtc_data[5] = bin2bcd(tm->tm_year - 100); |
| rtc_data[6] = bin2bcd(tm->tm_wday); |
| |
| /* Stop RTC while updating the RTC registers */ |
| ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG, |
| BIT_RTC_CTRL_REG_STOP_RTC_M, |
| BIT_RTC_CTRL_REG_STOP_RTC_M); |
| if (ret) { |
| dev_err(dev, "Failed to update RTC control: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_bulk_write(rk808->regmap, RK808_SECONDS_REG, |
| rtc_data, NUM_TIME_REGS); |
| if (ret) { |
| dev_err(dev, "Failed to bull write rtc_data: %d\n", ret); |
| return ret; |
| } |
| /* Start RTC again */ |
| ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG, |
| BIT_RTC_CTRL_REG_STOP_RTC_M, 0); |
| if (ret) { |
| dev_err(dev, "Failed to update RTC control: %d\n", ret); |
| return ret; |
| } |
| return 0; |
| } |
| |
| /* Read alarm time and date in RTC */ |
| static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev); |
| struct rk808 *rk808 = rk808_rtc->rk808; |
| u8 alrm_data[NUM_ALARM_REGS]; |
| uint32_t int_reg; |
| int ret; |
| |
| ret = regmap_bulk_read(rk808->regmap, RK808_ALARM_SECONDS_REG, |
| alrm_data, NUM_ALARM_REGS); |
| |
| alrm->time.tm_sec = bcd2bin(alrm_data[0] & SECONDS_REG_MSK); |
| alrm->time.tm_min = bcd2bin(alrm_data[1] & MINUTES_REG_MAK); |
| alrm->time.tm_hour = bcd2bin(alrm_data[2] & HOURS_REG_MSK); |
| alrm->time.tm_mday = bcd2bin(alrm_data[3] & DAYS_REG_MSK); |
| alrm->time.tm_mon = (bcd2bin(alrm_data[4] & MONTHS_REG_MSK)) - 1; |
| alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100; |
| rockchip_to_gregorian(&alrm->time); |
| |
| ret = regmap_read(rk808->regmap, RK808_RTC_INT_REG, &int_reg); |
| if (ret) { |
| dev_err(dev, "Failed to read RTC INT REG: %d\n", ret); |
| return ret; |
| } |
| |
| dev_dbg(dev, "alrm read RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n", |
| 1900 + alrm->time.tm_year, alrm->time.tm_mon + 1, |
| alrm->time.tm_mday, alrm->time.tm_wday, alrm->time.tm_hour, |
| alrm->time.tm_min, alrm->time.tm_sec); |
| |
| alrm->enabled = (int_reg & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) ? 1 : 0; |
| |
| return 0; |
| } |
| |
| static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc) |
| { |
| struct rk808 *rk808 = rk808_rtc->rk808; |
| int ret; |
| |
| ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG, |
| BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0); |
| |
| return ret; |
| } |
| |
| static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc) |
| { |
| struct rk808 *rk808 = rk808_rtc->rk808; |
| int ret; |
| |
| ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG, |
| BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, |
| BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); |
| |
| return ret; |
| } |
| |
| static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev); |
| struct rk808 *rk808 = rk808_rtc->rk808; |
| u8 alrm_data[NUM_ALARM_REGS]; |
| int ret; |
| |
| ret = rk808_rtc_stop_alarm(rk808_rtc); |
| if (ret) { |
| dev_err(dev, "Failed to stop alarm: %d\n", ret); |
| return ret; |
| } |
| dev_dbg(dev, "alrm set RTC date/time %4d-%02d-%02d(%d) %02d:%02d:%02d\n", |
| 1900 + alrm->time.tm_year, alrm->time.tm_mon + 1, |
| alrm->time.tm_mday, alrm->time.tm_wday, alrm->time.tm_hour, |
| alrm->time.tm_min, alrm->time.tm_sec); |
| |
| gregorian_to_rockchip(&alrm->time); |
| alrm_data[0] = bin2bcd(alrm->time.tm_sec); |
| alrm_data[1] = bin2bcd(alrm->time.tm_min); |
| alrm_data[2] = bin2bcd(alrm->time.tm_hour); |
| alrm_data[3] = bin2bcd(alrm->time.tm_mday); |
| alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1); |
| alrm_data[5] = bin2bcd(alrm->time.tm_year - 100); |
| |
| ret = regmap_bulk_write(rk808->regmap, RK808_ALARM_SECONDS_REG, |
| alrm_data, NUM_ALARM_REGS); |
| if (ret) { |
| dev_err(dev, "Failed to bulk write: %d\n", ret); |
| return ret; |
| } |
| if (alrm->enabled) { |
| ret = rk808_rtc_start_alarm(rk808_rtc); |
| if (ret) { |
| dev_err(dev, "Failed to start alarm: %d\n", ret); |
| return ret; |
| } |
| } |
| return 0; |
| } |
| |
| static int rk808_rtc_alarm_irq_enable(struct device *dev, |
| unsigned int enabled) |
| { |
| struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev); |
| |
| if (enabled) |
| return rk808_rtc_start_alarm(rk808_rtc); |
| |
| return rk808_rtc_stop_alarm(rk808_rtc); |
| } |
| |
| /* |
| * We will just handle setting the frequency and make use the framework for |
| * reading the periodic interupts. |
| * |
| * @freq: Current periodic IRQ freq: |
| * bit 0: every second |
| * bit 1: every minute |
| * bit 2: every hour |
| * bit 3: every day |
| */ |
| static irqreturn_t rk808_alarm_irq(int irq, void *data) |
| { |
| struct rk808_rtc *rk808_rtc = data; |
| struct rk808 *rk808 = rk808_rtc->rk808; |
| struct i2c_client *client = rk808->i2c; |
| int ret; |
| |
| ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG, |
| RTC_STATUS_MASK); |
| if (ret) { |
| dev_err(&client->dev, |
| "%s:Failed to update RTC status: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| rtc_update_irq(rk808_rtc->rtc, 1, RTC_IRQF | RTC_AF); |
| dev_dbg(&client->dev, |
| "%s:irq=%d\n", __func__, irq); |
| return IRQ_HANDLED; |
| } |
| |
| static const struct rtc_class_ops rk808_rtc_ops = { |
| .read_time = rk808_rtc_readtime, |
| .set_time = rk808_rtc_set_time, |
| .read_alarm = rk808_rtc_readalarm, |
| .set_alarm = rk808_rtc_setalarm, |
| .alarm_irq_enable = rk808_rtc_alarm_irq_enable, |
| }; |
| |
| #ifdef CONFIG_PM_SLEEP |
| /* Turn off the alarm if it should not be a wake source. */ |
| static int rk808_rtc_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct rk808_rtc *rk808_rtc = dev_get_drvdata(&pdev->dev); |
| |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(rk808_rtc->irq); |
| |
| return 0; |
| } |
| |
| /* Enable the alarm if it should be enabled (in case it was disabled to |
| * prevent use as a wake source). |
| */ |
| static int rk808_rtc_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct rk808_rtc *rk808_rtc = dev_get_drvdata(&pdev->dev); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(rk808_rtc->irq); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(rk808_rtc_pm_ops, |
| rk808_rtc_suspend, rk808_rtc_resume); |
| |
| static int rk808_rtc_probe(struct platform_device *pdev) |
| { |
| struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent); |
| struct rk808_rtc *rk808_rtc; |
| struct rtc_time tm; |
| int ret; |
| |
| rk808_rtc = devm_kzalloc(&pdev->dev, sizeof(*rk808_rtc), GFP_KERNEL); |
| if (rk808_rtc == NULL) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, rk808_rtc); |
| rk808_rtc->rk808 = rk808; |
| |
| /* start rtc running by default, and use shadowed timer. */ |
| ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG, |
| BIT_RTC_CTRL_REG_STOP_RTC_M | |
| BIT_RTC_CTRL_REG_RTC_READSEL_M, |
| BIT_RTC_CTRL_REG_RTC_READSEL_M); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Failed to update RTC control: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG, |
| RTC_STATUS_MASK); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Failed to write RTC status: %d\n", ret); |
| return ret; |
| } |
| |
| /* set init time */ |
| ret = rk808_rtc_readtime(&pdev->dev, &tm); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to read RTC time\n"); |
| return ret; |
| } |
| ret = rtc_valid_tm(&tm); |
| if (ret) |
| dev_warn(&pdev->dev, "invalid date/time\n"); |
| |
| device_init_wakeup(&pdev->dev, 1); |
| |
| rk808_rtc->rtc = devm_rtc_allocate_device(&pdev->dev); |
| if (IS_ERR(rk808_rtc->rtc)) |
| return PTR_ERR(rk808_rtc->rtc); |
| |
| rk808_rtc->rtc->ops = &rk808_rtc_ops; |
| |
| rk808_rtc->irq = platform_get_irq(pdev, 0); |
| if (rk808_rtc->irq < 0) { |
| if (rk808_rtc->irq != -EPROBE_DEFER) |
| dev_err(&pdev->dev, "Wake up is not possible as irq = %d\n", |
| rk808_rtc->irq); |
| return rk808_rtc->irq; |
| } |
| |
| /* request alarm irq of rk808 */ |
| ret = devm_request_threaded_irq(&pdev->dev, rk808_rtc->irq, NULL, |
| rk808_alarm_irq, 0, |
| "RTC alarm", rk808_rtc); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n", |
| rk808_rtc->irq, ret); |
| return ret; |
| } |
| |
| return rtc_register_device(rk808_rtc->rtc); |
| } |
| |
| static struct platform_driver rk808_rtc_driver = { |
| .probe = rk808_rtc_probe, |
| .driver = { |
| .name = "rk808-rtc", |
| .pm = &rk808_rtc_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(rk808_rtc_driver); |
| |
| MODULE_DESCRIPTION("RTC driver for the rk808 series PMICs"); |
| MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); |
| MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:rk808-rtc"); |