| /* |
| * rtc-ds1390.c -- driver for the Dallas/Maxim DS1390/93/94 SPI RTC |
| * |
| * Copyright (C) 2008 Mercury IMC Ltd |
| * Written by Mark Jackson <mpfj@mimc.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * NOTE: Currently this driver only supports the bare minimum for read |
| * and write the RTC. The extra features provided by the chip family |
| * (alarms, trickle charger, different control registers) are unavailable. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/rtc.h> |
| #include <linux/spi/spi.h> |
| #include <linux/bcd.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| |
| #define DS1390_REG_100THS 0x00 |
| #define DS1390_REG_SECONDS 0x01 |
| #define DS1390_REG_MINUTES 0x02 |
| #define DS1390_REG_HOURS 0x03 |
| #define DS1390_REG_DAY 0x04 |
| #define DS1390_REG_DATE 0x05 |
| #define DS1390_REG_MONTH_CENT 0x06 |
| #define DS1390_REG_YEAR 0x07 |
| |
| #define DS1390_REG_ALARM_100THS 0x08 |
| #define DS1390_REG_ALARM_SECONDS 0x09 |
| #define DS1390_REG_ALARM_MINUTES 0x0A |
| #define DS1390_REG_ALARM_HOURS 0x0B |
| #define DS1390_REG_ALARM_DAY_DATE 0x0C |
| |
| #define DS1390_REG_CONTROL 0x0D |
| #define DS1390_REG_STATUS 0x0E |
| #define DS1390_REG_TRICKLE 0x0F |
| |
| #define DS1390_TRICKLE_CHARGER_ENABLE 0xA0 |
| #define DS1390_TRICKLE_CHARGER_250_OHM 0x01 |
| #define DS1390_TRICKLE_CHARGER_2K_OHM 0x02 |
| #define DS1390_TRICKLE_CHARGER_4K_OHM 0x03 |
| #define DS1390_TRICKLE_CHARGER_NO_DIODE 0x04 |
| #define DS1390_TRICKLE_CHARGER_DIODE 0x08 |
| |
| struct ds1390 { |
| struct rtc_device *rtc; |
| u8 txrx_buf[9]; /* cmd + 8 registers */ |
| }; |
| |
| static void ds1390_set_reg(struct device *dev, unsigned char address, |
| unsigned char data) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| unsigned char buf[2]; |
| |
| /* MSB must be '1' to write */ |
| buf[0] = address | 0x80; |
| buf[1] = data; |
| |
| spi_write(spi, buf, 2); |
| } |
| |
| static int ds1390_get_reg(struct device *dev, unsigned char address, |
| unsigned char *data) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct ds1390 *chip = dev_get_drvdata(dev); |
| int status; |
| |
| if (!data) |
| return -EINVAL; |
| |
| /* Clear MSB to indicate read */ |
| chip->txrx_buf[0] = address & 0x7f; |
| /* do the i/o */ |
| status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); |
| if (status != 0) |
| return status; |
| |
| *data = chip->txrx_buf[0]; |
| |
| return 0; |
| } |
| |
| static void ds1390_trickle_of_init(struct spi_device *spi) |
| { |
| u32 ohms = 0; |
| u8 value; |
| |
| if (of_property_read_u32(spi->dev.of_node, "trickle-resistor-ohms", |
| &ohms)) |
| goto out; |
| |
| /* Enable charger */ |
| value = DS1390_TRICKLE_CHARGER_ENABLE; |
| if (of_property_read_bool(spi->dev.of_node, "trickle-diode-disable")) |
| value |= DS1390_TRICKLE_CHARGER_NO_DIODE; |
| else |
| value |= DS1390_TRICKLE_CHARGER_DIODE; |
| |
| /* Resistor select */ |
| switch (ohms) { |
| case 250: |
| value |= DS1390_TRICKLE_CHARGER_250_OHM; |
| break; |
| case 2000: |
| value |= DS1390_TRICKLE_CHARGER_2K_OHM; |
| break; |
| case 4000: |
| value |= DS1390_TRICKLE_CHARGER_4K_OHM; |
| break; |
| default: |
| dev_warn(&spi->dev, |
| "Unsupported ohm value %02ux in dt\n", ohms); |
| return; |
| } |
| |
| ds1390_set_reg(&spi->dev, DS1390_REG_TRICKLE, value); |
| |
| out: |
| return; |
| } |
| |
| static int ds1390_read_time(struct device *dev, struct rtc_time *dt) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct ds1390 *chip = dev_get_drvdata(dev); |
| int status; |
| |
| /* build the message */ |
| chip->txrx_buf[0] = DS1390_REG_SECONDS; |
| |
| /* do the i/o */ |
| status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); |
| if (status != 0) |
| return status; |
| |
| /* The chip sends data in this order: |
| * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ |
| dt->tm_sec = bcd2bin(chip->txrx_buf[0]); |
| dt->tm_min = bcd2bin(chip->txrx_buf[1]); |
| dt->tm_hour = bcd2bin(chip->txrx_buf[2]); |
| dt->tm_wday = bcd2bin(chip->txrx_buf[3]); |
| dt->tm_mday = bcd2bin(chip->txrx_buf[4]); |
| /* mask off century bit */ |
| dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; |
| /* adjust for century bit */ |
| dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); |
| |
| return rtc_valid_tm(dt); |
| } |
| |
| static int ds1390_set_time(struct device *dev, struct rtc_time *dt) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct ds1390 *chip = dev_get_drvdata(dev); |
| |
| /* build the message */ |
| chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; |
| chip->txrx_buf[1] = bin2bcd(dt->tm_sec); |
| chip->txrx_buf[2] = bin2bcd(dt->tm_min); |
| chip->txrx_buf[3] = bin2bcd(dt->tm_hour); |
| chip->txrx_buf[4] = bin2bcd(dt->tm_wday); |
| chip->txrx_buf[5] = bin2bcd(dt->tm_mday); |
| chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | |
| ((dt->tm_year > 99) ? 0x80 : 0x00); |
| chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); |
| |
| /* do the i/o */ |
| return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); |
| } |
| |
| static const struct rtc_class_ops ds1390_rtc_ops = { |
| .read_time = ds1390_read_time, |
| .set_time = ds1390_set_time, |
| }; |
| |
| static int ds1390_probe(struct spi_device *spi) |
| { |
| unsigned char tmp; |
| struct ds1390 *chip; |
| int res; |
| |
| spi->mode = SPI_MODE_3; |
| spi->bits_per_word = 8; |
| spi_setup(spi); |
| |
| chip = devm_kzalloc(&spi->dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| spi_set_drvdata(spi, chip); |
| |
| res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); |
| if (res != 0) { |
| dev_err(&spi->dev, "unable to read device\n"); |
| return res; |
| } |
| |
| if (spi->dev.of_node) |
| ds1390_trickle_of_init(spi); |
| |
| chip->rtc = devm_rtc_device_register(&spi->dev, "ds1390", |
| &ds1390_rtc_ops, THIS_MODULE); |
| if (IS_ERR(chip->rtc)) { |
| dev_err(&spi->dev, "unable to register device\n"); |
| res = PTR_ERR(chip->rtc); |
| } |
| |
| return res; |
| } |
| |
| static struct spi_driver ds1390_driver = { |
| .driver = { |
| .name = "rtc-ds1390", |
| }, |
| .probe = ds1390_probe, |
| }; |
| |
| module_spi_driver(ds1390_driver); |
| |
| MODULE_DESCRIPTION("Dallas/Maxim DS1390/93/94 SPI RTC driver"); |
| MODULE_AUTHOR("Mark Jackson <mpfj@mimc.co.uk>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("spi:rtc-ds1390"); |