| /* |
| * Gas Gauge driver for SBS Compliant Batteries |
| * |
| * Copyright (c) 2010, NVIDIA Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/err.h> |
| #include <linux/power_supply.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <linux/of.h> |
| #include <linux/stat.h> |
| |
| #include <linux/power/sbs-battery.h> |
| |
| enum { |
| REG_MANUFACTURER_DATA, |
| REG_TEMPERATURE, |
| REG_VOLTAGE, |
| REG_CURRENT, |
| REG_CAPACITY, |
| REG_TIME_TO_EMPTY, |
| REG_TIME_TO_FULL, |
| REG_STATUS, |
| REG_CYCLE_COUNT, |
| REG_SERIAL_NUMBER, |
| REG_REMAINING_CAPACITY, |
| REG_REMAINING_CAPACITY_CHARGE, |
| REG_FULL_CHARGE_CAPACITY, |
| REG_FULL_CHARGE_CAPACITY_CHARGE, |
| REG_DESIGN_CAPACITY, |
| REG_DESIGN_CAPACITY_CHARGE, |
| REG_DESIGN_VOLTAGE_MIN, |
| REG_DESIGN_VOLTAGE_MAX, |
| REG_MANUFACTURER, |
| REG_MODEL_NAME, |
| }; |
| |
| /* Battery Mode defines */ |
| #define BATTERY_MODE_OFFSET 0x03 |
| #define BATTERY_MODE_MASK 0x8000 |
| enum sbs_battery_mode { |
| BATTERY_MODE_AMPS, |
| BATTERY_MODE_WATTS |
| }; |
| |
| /* manufacturer access defines */ |
| #define MANUFACTURER_ACCESS_STATUS 0x0006 |
| #define MANUFACTURER_ACCESS_SLEEP 0x0011 |
| |
| /* battery status value bits */ |
| #define BATTERY_DISCHARGING 0x40 |
| #define BATTERY_FULL_CHARGED 0x20 |
| #define BATTERY_FULL_DISCHARGED 0x10 |
| |
| /* min_value and max_value are only valid for numerical data */ |
| #define SBS_DATA(_psp, _addr, _min_value, _max_value) { \ |
| .psp = _psp, \ |
| .addr = _addr, \ |
| .min_value = _min_value, \ |
| .max_value = _max_value, \ |
| } |
| |
| static const struct chip_data { |
| enum power_supply_property psp; |
| u8 addr; |
| int min_value; |
| int max_value; |
| } sbs_data[] = { |
| [REG_MANUFACTURER_DATA] = |
| SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535), |
| [REG_TEMPERATURE] = |
| SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535), |
| [REG_VOLTAGE] = |
| SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000), |
| [REG_CURRENT] = |
| SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767), |
| [REG_CAPACITY] = |
| SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0D, 0, 100), |
| [REG_REMAINING_CAPACITY] = |
| SBS_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535), |
| [REG_REMAINING_CAPACITY_CHARGE] = |
| SBS_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535), |
| [REG_FULL_CHARGE_CAPACITY] = |
| SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535), |
| [REG_FULL_CHARGE_CAPACITY_CHARGE] = |
| SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535), |
| [REG_TIME_TO_EMPTY] = |
| SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535), |
| [REG_TIME_TO_FULL] = |
| SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535), |
| [REG_STATUS] = |
| SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535), |
| [REG_CYCLE_COUNT] = |
| SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535), |
| [REG_DESIGN_CAPACITY] = |
| SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535), |
| [REG_DESIGN_CAPACITY_CHARGE] = |
| SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535), |
| [REG_DESIGN_VOLTAGE_MIN] = |
| SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 0x19, 0, 65535), |
| [REG_DESIGN_VOLTAGE_MAX] = |
| SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535), |
| [REG_SERIAL_NUMBER] = |
| SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535), |
| /* Properties of type `const char *' */ |
| [REG_MANUFACTURER] = |
| SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535), |
| [REG_MODEL_NAME] = |
| SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535) |
| }; |
| |
| static enum power_supply_property sbs_properties[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, |
| POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, |
| POWER_SUPPLY_PROP_ENERGY_NOW, |
| POWER_SUPPLY_PROP_ENERGY_FULL, |
| POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CHARGE_NOW, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| /* Properties of type `const char *' */ |
| POWER_SUPPLY_PROP_MANUFACTURER, |
| POWER_SUPPLY_PROP_MODEL_NAME |
| }; |
| |
| struct sbs_info { |
| struct i2c_client *client; |
| struct power_supply *power_supply; |
| struct sbs_platform_data *pdata; |
| bool is_present; |
| bool gpio_detect; |
| bool enable_detection; |
| int irq; |
| int last_state; |
| int poll_time; |
| struct delayed_work work; |
| int ignore_changes; |
| }; |
| |
| static char model_name[I2C_SMBUS_BLOCK_MAX + 1]; |
| static char manufacturer[I2C_SMBUS_BLOCK_MAX + 1]; |
| static bool force_load; |
| |
| static int sbs_read_word_data(struct i2c_client *client, u8 address) |
| { |
| struct sbs_info *chip = i2c_get_clientdata(client); |
| s32 ret = 0; |
| int retries = 1; |
| |
| if (chip->pdata) |
| retries = max(chip->pdata->i2c_retry_count + 1, 1); |
| |
| while (retries > 0) { |
| ret = i2c_smbus_read_word_data(client, address); |
| if (ret >= 0) |
| break; |
| retries--; |
| } |
| |
| if (ret < 0) { |
| dev_dbg(&client->dev, |
| "%s: i2c read at address 0x%x failed\n", |
| __func__, address); |
| return ret; |
| } |
| |
| return le16_to_cpu(ret); |
| } |
| |
| static int sbs_read_string_data(struct i2c_client *client, u8 address, |
| char *values) |
| { |
| struct sbs_info *chip = i2c_get_clientdata(client); |
| s32 ret = 0, block_length = 0; |
| int retries_length = 1, retries_block = 1; |
| u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; |
| |
| if (chip->pdata) { |
| retries_length = max(chip->pdata->i2c_retry_count + 1, 1); |
| retries_block = max(chip->pdata->i2c_retry_count + 1, 1); |
| } |
| |
| /* Adapter needs to support these two functions */ |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_I2C_BLOCK)){ |
| return -ENODEV; |
| } |
| |
| /* Get the length of block data */ |
| while (retries_length > 0) { |
| ret = i2c_smbus_read_byte_data(client, address); |
| if (ret >= 0) |
| break; |
| retries_length--; |
| } |
| |
| if (ret < 0) { |
| dev_dbg(&client->dev, |
| "%s: i2c read at address 0x%x failed\n", |
| __func__, address); |
| return ret; |
| } |
| |
| /* block_length does not include NULL terminator */ |
| block_length = ret; |
| if (block_length > I2C_SMBUS_BLOCK_MAX) { |
| dev_err(&client->dev, |
| "%s: Returned block_length is longer than 0x%x\n", |
| __func__, I2C_SMBUS_BLOCK_MAX); |
| return -EINVAL; |
| } |
| |
| /* Get the block data */ |
| while (retries_block > 0) { |
| ret = i2c_smbus_read_i2c_block_data( |
| client, address, |
| block_length + 1, block_buffer); |
| if (ret >= 0) |
| break; |
| retries_block--; |
| } |
| |
| if (ret < 0) { |
| dev_dbg(&client->dev, |
| "%s: i2c read at address 0x%x failed\n", |
| __func__, address); |
| return ret; |
| } |
| |
| /* block_buffer[0] == block_length */ |
| memcpy(values, block_buffer + 1, block_length); |
| values[block_length] = '\0'; |
| |
| return le16_to_cpu(ret); |
| } |
| |
| static int sbs_write_word_data(struct i2c_client *client, u8 address, |
| u16 value) |
| { |
| struct sbs_info *chip = i2c_get_clientdata(client); |
| s32 ret = 0; |
| int retries = 1; |
| |
| if (chip->pdata) |
| retries = max(chip->pdata->i2c_retry_count + 1, 1); |
| |
| while (retries > 0) { |
| ret = i2c_smbus_write_word_data(client, address, |
| le16_to_cpu(value)); |
| if (ret >= 0) |
| break; |
| retries--; |
| } |
| |
| if (ret < 0) { |
| dev_dbg(&client->dev, |
| "%s: i2c write to address 0x%x failed\n", |
| __func__, address); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int sbs_get_battery_presence_and_health( |
| struct i2c_client *client, enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| s32 ret; |
| struct sbs_info *chip = i2c_get_clientdata(client); |
| |
| if (psp == POWER_SUPPLY_PROP_PRESENT && |
| chip->gpio_detect) { |
| ret = gpio_get_value(chip->pdata->battery_detect); |
| if (ret == chip->pdata->battery_detect_present) |
| val->intval = 1; |
| else |
| val->intval = 0; |
| chip->is_present = val->intval; |
| return ret; |
| } |
| |
| /* Write to ManufacturerAccess with |
| * ManufacturerAccess command and then |
| * read the status */ |
| ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr, |
| MANUFACTURER_ACCESS_STATUS); |
| if (ret < 0) { |
| if (psp == POWER_SUPPLY_PROP_PRESENT) |
| val->intval = 0; /* battery removed */ |
| return ret; |
| } |
| |
| ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr); |
| if (ret < 0) |
| return ret; |
| |
| if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value || |
| ret > sbs_data[REG_MANUFACTURER_DATA].max_value) { |
| val->intval = 0; |
| return 0; |
| } |
| |
| /* Mask the upper nibble of 2nd byte and |
| * lower byte of response then |
| * shift the result by 8 to get status*/ |
| ret &= 0x0F00; |
| ret >>= 8; |
| if (psp == POWER_SUPPLY_PROP_PRESENT) { |
| if (ret == 0x0F) |
| /* battery removed */ |
| val->intval = 0; |
| else |
| val->intval = 1; |
| } else if (psp == POWER_SUPPLY_PROP_HEALTH) { |
| if (ret == 0x09) |
| val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| else if (ret == 0x0B) |
| val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; |
| else if (ret == 0x0C) |
| val->intval = POWER_SUPPLY_HEALTH_DEAD; |
| else |
| val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| } |
| |
| return 0; |
| } |
| |
| static int sbs_get_battery_property(struct i2c_client *client, |
| int reg_offset, enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct sbs_info *chip = i2c_get_clientdata(client); |
| s32 ret; |
| |
| ret = sbs_read_word_data(client, sbs_data[reg_offset].addr); |
| if (ret < 0) |
| return ret; |
| |
| /* returned values are 16 bit */ |
| if (sbs_data[reg_offset].min_value < 0) |
| ret = (s16)ret; |
| |
| if (ret >= sbs_data[reg_offset].min_value && |
| ret <= sbs_data[reg_offset].max_value) { |
| val->intval = ret; |
| if (psp != POWER_SUPPLY_PROP_STATUS) |
| return 0; |
| |
| if (ret & BATTERY_FULL_CHARGED) |
| val->intval = POWER_SUPPLY_STATUS_FULL; |
| else if (ret & BATTERY_FULL_DISCHARGED) |
| val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| else if (ret & BATTERY_DISCHARGING) |
| val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| else |
| val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| |
| if (chip->poll_time == 0) |
| chip->last_state = val->intval; |
| else if (chip->last_state != val->intval) { |
| cancel_delayed_work_sync(&chip->work); |
| power_supply_changed(chip->power_supply); |
| chip->poll_time = 0; |
| } |
| } else { |
| if (psp == POWER_SUPPLY_PROP_STATUS) |
| val->intval = POWER_SUPPLY_STATUS_UNKNOWN; |
| else |
| val->intval = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int sbs_get_battery_string_property(struct i2c_client *client, |
| int reg_offset, enum power_supply_property psp, char *val) |
| { |
| s32 ret; |
| |
| ret = sbs_read_string_data(client, sbs_data[reg_offset].addr, val); |
| |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void sbs_unit_adjustment(struct i2c_client *client, |
| enum power_supply_property psp, union power_supply_propval *val) |
| { |
| #define BASE_UNIT_CONVERSION 1000 |
| #define BATTERY_MODE_CAP_MULT_WATT (10 * BASE_UNIT_CONVERSION) |
| #define TIME_UNIT_CONVERSION 60 |
| #define TEMP_KELVIN_TO_CELSIUS 2731 |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| case POWER_SUPPLY_PROP_ENERGY_FULL: |
| case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: |
| /* sbs provides energy in units of 10mWh. |
| * Convert to µWh |
| */ |
| val->intval *= BATTERY_MODE_CAP_MULT_WATT; |
| break; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| case POWER_SUPPLY_PROP_CHARGE_NOW: |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| val->intval *= BASE_UNIT_CONVERSION; |
| break; |
| |
| case POWER_SUPPLY_PROP_TEMP: |
| /* sbs provides battery temperature in 0.1K |
| * so convert it to 0.1°C |
| */ |
| val->intval -= TEMP_KELVIN_TO_CELSIUS; |
| break; |
| |
| case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: |
| case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: |
| /* sbs provides time to empty and time to full in minutes. |
| * Convert to seconds |
| */ |
| val->intval *= TIME_UNIT_CONVERSION; |
| break; |
| |
| default: |
| dev_dbg(&client->dev, |
| "%s: no need for unit conversion %d\n", __func__, psp); |
| } |
| } |
| |
| static enum sbs_battery_mode sbs_set_battery_mode(struct i2c_client *client, |
| enum sbs_battery_mode mode) |
| { |
| int ret, original_val; |
| |
| original_val = sbs_read_word_data(client, BATTERY_MODE_OFFSET); |
| if (original_val < 0) |
| return original_val; |
| |
| if ((original_val & BATTERY_MODE_MASK) == mode) |
| return mode; |
| |
| if (mode == BATTERY_MODE_AMPS) |
| ret = original_val & ~BATTERY_MODE_MASK; |
| else |
| ret = original_val | BATTERY_MODE_MASK; |
| |
| ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret); |
| if (ret < 0) |
| return ret; |
| |
| return original_val & BATTERY_MODE_MASK; |
| } |
| |
| static int sbs_get_battery_capacity(struct i2c_client *client, |
| int reg_offset, enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| s32 ret; |
| enum sbs_battery_mode mode = BATTERY_MODE_WATTS; |
| |
| if (power_supply_is_amp_property(psp)) |
| mode = BATTERY_MODE_AMPS; |
| |
| mode = sbs_set_battery_mode(client, mode); |
| if (mode < 0) |
| return mode; |
| |
| ret = sbs_read_word_data(client, sbs_data[reg_offset].addr); |
| if (ret < 0) |
| return ret; |
| |
| if (psp == POWER_SUPPLY_PROP_CAPACITY) { |
| /* sbs spec says that this can be >100 % |
| * even if max value is 100 % */ |
| val->intval = min(ret, 100); |
| } else |
| val->intval = ret; |
| |
| ret = sbs_set_battery_mode(client, mode); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static char sbs_serial[5]; |
| static int sbs_get_battery_serial_number(struct i2c_client *client, |
| union power_supply_propval *val) |
| { |
| int ret; |
| |
| ret = sbs_read_word_data(client, sbs_data[REG_SERIAL_NUMBER].addr); |
| if (ret < 0) |
| return ret; |
| |
| ret = sprintf(sbs_serial, "%04x", ret); |
| val->strval = sbs_serial; |
| |
| return 0; |
| } |
| |
| static int sbs_get_property_index(struct i2c_client *client, |
| enum power_supply_property psp) |
| { |
| int count; |
| for (count = 0; count < ARRAY_SIZE(sbs_data); count++) |
| if (psp == sbs_data[count].psp) |
| return count; |
| |
| dev_warn(&client->dev, |
| "%s: Invalid Property - %d\n", __func__, psp); |
| |
| return -EINVAL; |
| } |
| |
| static int sbs_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| int ret = 0; |
| struct sbs_info *chip = power_supply_get_drvdata(psy); |
| struct i2c_client *client = chip->client; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_PRESENT: |
| case POWER_SUPPLY_PROP_HEALTH: |
| ret = sbs_get_battery_presence_and_health(client, psp, val); |
| if (psp == POWER_SUPPLY_PROP_PRESENT) |
| return 0; |
| break; |
| |
| case POWER_SUPPLY_PROP_TECHNOLOGY: |
| val->intval = POWER_SUPPLY_TECHNOLOGY_LION; |
| goto done; /* don't trigger power_supply_changed()! */ |
| |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| case POWER_SUPPLY_PROP_ENERGY_FULL: |
| case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: |
| case POWER_SUPPLY_PROP_CHARGE_NOW: |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| case POWER_SUPPLY_PROP_CAPACITY: |
| ret = sbs_get_property_index(client, psp); |
| if (ret < 0) |
| break; |
| |
| ret = sbs_get_battery_capacity(client, ret, psp, val); |
| break; |
| |
| case POWER_SUPPLY_PROP_SERIAL_NUMBER: |
| ret = sbs_get_battery_serial_number(client, val); |
| break; |
| |
| case POWER_SUPPLY_PROP_STATUS: |
| case POWER_SUPPLY_PROP_CYCLE_COUNT: |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| case POWER_SUPPLY_PROP_TEMP: |
| case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: |
| case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| ret = sbs_get_property_index(client, psp); |
| if (ret < 0) |
| break; |
| |
| ret = sbs_get_battery_property(client, ret, psp, val); |
| break; |
| |
| case POWER_SUPPLY_PROP_MODEL_NAME: |
| ret = sbs_get_property_index(client, psp); |
| if (ret < 0) |
| break; |
| |
| ret = sbs_get_battery_string_property(client, ret, psp, |
| model_name); |
| val->strval = model_name; |
| break; |
| |
| case POWER_SUPPLY_PROP_MANUFACTURER: |
| ret = sbs_get_property_index(client, psp); |
| if (ret < 0) |
| break; |
| |
| ret = sbs_get_battery_string_property(client, ret, psp, |
| manufacturer); |
| val->strval = manufacturer; |
| break; |
| |
| default: |
| dev_err(&client->dev, |
| "%s: INVALID property\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!chip->enable_detection) |
| goto done; |
| |
| if (!chip->gpio_detect && |
| chip->is_present != (ret >= 0)) { |
| chip->is_present = (ret >= 0); |
| power_supply_changed(chip->power_supply); |
| } |
| |
| done: |
| if (!ret) { |
| /* Convert units to match requirements for power supply class */ |
| sbs_unit_adjustment(client, psp, val); |
| } |
| |
| dev_dbg(&client->dev, |
| "%s: property = %d, value = %x\n", __func__, psp, val->intval); |
| |
| if (ret && chip->is_present) |
| return ret; |
| |
| /* battery not present, so return NODATA for properties */ |
| if (ret) |
| return -ENODATA; |
| |
| return 0; |
| } |
| |
| static irqreturn_t sbs_irq(int irq, void *devid) |
| { |
| struct power_supply *battery = devid; |
| |
| power_supply_changed(battery); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void sbs_external_power_changed(struct power_supply *psy) |
| { |
| struct sbs_info *chip = power_supply_get_drvdata(psy); |
| |
| if (chip->ignore_changes > 0) { |
| chip->ignore_changes--; |
| return; |
| } |
| |
| /* cancel outstanding work */ |
| cancel_delayed_work_sync(&chip->work); |
| |
| schedule_delayed_work(&chip->work, HZ); |
| chip->poll_time = chip->pdata->poll_retry_count; |
| } |
| |
| static void sbs_delayed_work(struct work_struct *work) |
| { |
| struct sbs_info *chip; |
| s32 ret; |
| |
| chip = container_of(work, struct sbs_info, work.work); |
| |
| ret = sbs_read_word_data(chip->client, sbs_data[REG_STATUS].addr); |
| /* if the read failed, give up on this work */ |
| if (ret < 0) { |
| chip->poll_time = 0; |
| return; |
| } |
| |
| if (ret & BATTERY_FULL_CHARGED) |
| ret = POWER_SUPPLY_STATUS_FULL; |
| else if (ret & BATTERY_FULL_DISCHARGED) |
| ret = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| else if (ret & BATTERY_DISCHARGING) |
| ret = POWER_SUPPLY_STATUS_DISCHARGING; |
| else |
| ret = POWER_SUPPLY_STATUS_CHARGING; |
| |
| if (chip->last_state != ret) { |
| chip->poll_time = 0; |
| power_supply_changed(chip->power_supply); |
| return; |
| } |
| if (chip->poll_time > 0) { |
| schedule_delayed_work(&chip->work, HZ); |
| chip->poll_time--; |
| return; |
| } |
| } |
| |
| #if defined(CONFIG_OF) |
| |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| |
| static const struct of_device_id sbs_dt_ids[] = { |
| { .compatible = "sbs,sbs-battery" }, |
| { .compatible = "ti,bq20z75" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sbs_dt_ids); |
| |
| static struct sbs_platform_data *sbs_of_populate_pdata( |
| struct i2c_client *client) |
| { |
| struct device_node *of_node = client->dev.of_node; |
| struct sbs_platform_data *pdata = client->dev.platform_data; |
| enum of_gpio_flags gpio_flags; |
| int rc; |
| u32 prop; |
| |
| /* verify this driver matches this device */ |
| if (!of_node) |
| return NULL; |
| |
| /* if platform data is set, honor it */ |
| if (pdata) |
| return pdata; |
| |
| /* first make sure at least one property is set, otherwise |
| * it won't change behavior from running without pdata. |
| */ |
| if (!of_get_property(of_node, "sbs,i2c-retry-count", NULL) && |
| !of_get_property(of_node, "sbs,poll-retry-count", NULL) && |
| !of_get_property(of_node, "sbs,battery-detect-gpios", NULL)) |
| goto of_out; |
| |
| pdata = devm_kzalloc(&client->dev, sizeof(struct sbs_platform_data), |
| GFP_KERNEL); |
| if (!pdata) |
| goto of_out; |
| |
| rc = of_property_read_u32(of_node, "sbs,i2c-retry-count", &prop); |
| if (!rc) |
| pdata->i2c_retry_count = prop; |
| |
| rc = of_property_read_u32(of_node, "sbs,poll-retry-count", &prop); |
| if (!rc) |
| pdata->poll_retry_count = prop; |
| |
| if (!of_get_property(of_node, "sbs,battery-detect-gpios", NULL)) { |
| pdata->battery_detect = -1; |
| goto of_out; |
| } |
| |
| pdata->battery_detect = of_get_named_gpio_flags(of_node, |
| "sbs,battery-detect-gpios", 0, &gpio_flags); |
| |
| if (gpio_flags & OF_GPIO_ACTIVE_LOW) |
| pdata->battery_detect_present = 0; |
| else |
| pdata->battery_detect_present = 1; |
| |
| of_out: |
| return pdata; |
| } |
| #else |
| static struct sbs_platform_data *sbs_of_populate_pdata( |
| struct i2c_client *client) |
| { |
| return client->dev.platform_data; |
| } |
| #endif |
| |
| static const struct power_supply_desc sbs_default_desc = { |
| .type = POWER_SUPPLY_TYPE_BATTERY, |
| .properties = sbs_properties, |
| .num_properties = ARRAY_SIZE(sbs_properties), |
| .get_property = sbs_get_property, |
| .external_power_changed = sbs_external_power_changed, |
| }; |
| |
| static int sbs_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct sbs_info *chip; |
| struct power_supply_desc *sbs_desc; |
| struct sbs_platform_data *pdata = client->dev.platform_data; |
| struct power_supply_config psy_cfg = {}; |
| int rc; |
| int irq; |
| |
| sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc, |
| sizeof(*sbs_desc), GFP_KERNEL); |
| if (!sbs_desc) |
| return -ENOMEM; |
| |
| sbs_desc->name = devm_kasprintf(&client->dev, GFP_KERNEL, "sbs-%s", |
| dev_name(&client->dev)); |
| if (!sbs_desc->name) |
| return -ENOMEM; |
| |
| chip = kzalloc(sizeof(struct sbs_info), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->client = client; |
| chip->enable_detection = false; |
| chip->gpio_detect = false; |
| psy_cfg.of_node = client->dev.of_node; |
| psy_cfg.drv_data = chip; |
| /* ignore first notification of external change, it is generated |
| * from the power_supply_register call back |
| */ |
| chip->ignore_changes = 1; |
| chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN; |
| |
| pdata = sbs_of_populate_pdata(client); |
| |
| if (pdata) { |
| chip->gpio_detect = gpio_is_valid(pdata->battery_detect); |
| chip->pdata = pdata; |
| } |
| |
| i2c_set_clientdata(client, chip); |
| |
| if (!chip->gpio_detect) |
| goto skip_gpio; |
| |
| rc = gpio_request(pdata->battery_detect, dev_name(&client->dev)); |
| if (rc) { |
| dev_warn(&client->dev, "Failed to request gpio: %d\n", rc); |
| chip->gpio_detect = false; |
| goto skip_gpio; |
| } |
| |
| rc = gpio_direction_input(pdata->battery_detect); |
| if (rc) { |
| dev_warn(&client->dev, "Failed to get gpio as input: %d\n", rc); |
| gpio_free(pdata->battery_detect); |
| chip->gpio_detect = false; |
| goto skip_gpio; |
| } |
| |
| irq = gpio_to_irq(pdata->battery_detect); |
| if (irq <= 0) { |
| dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq); |
| gpio_free(pdata->battery_detect); |
| chip->gpio_detect = false; |
| goto skip_gpio; |
| } |
| |
| rc = request_irq(irq, sbs_irq, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| dev_name(&client->dev), chip->power_supply); |
| if (rc) { |
| dev_warn(&client->dev, "Failed to request irq: %d\n", rc); |
| gpio_free(pdata->battery_detect); |
| chip->gpio_detect = false; |
| goto skip_gpio; |
| } |
| |
| chip->irq = irq; |
| |
| skip_gpio: |
| /* |
| * Before we register, we might need to make sure we can actually talk |
| * to the battery. |
| */ |
| if (!force_load) { |
| rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr); |
| |
| if (rc < 0) { |
| dev_err(&client->dev, "%s: Failed to get device status\n", |
| __func__); |
| goto exit_psupply; |
| } |
| } |
| |
| chip->power_supply = power_supply_register(&client->dev, sbs_desc, |
| &psy_cfg); |
| if (IS_ERR(chip->power_supply)) { |
| dev_err(&client->dev, |
| "%s: Failed to register power supply\n", __func__); |
| rc = PTR_ERR(chip->power_supply); |
| goto exit_psupply; |
| } |
| |
| dev_info(&client->dev, |
| "%s: battery gas gauge device registered\n", client->name); |
| |
| INIT_DELAYED_WORK(&chip->work, sbs_delayed_work); |
| |
| chip->enable_detection = true; |
| |
| return 0; |
| |
| exit_psupply: |
| if (chip->irq) |
| free_irq(chip->irq, chip->power_supply); |
| if (chip->gpio_detect) |
| gpio_free(pdata->battery_detect); |
| |
| kfree(chip); |
| |
| return rc; |
| } |
| |
| static int sbs_remove(struct i2c_client *client) |
| { |
| struct sbs_info *chip = i2c_get_clientdata(client); |
| |
| if (chip->irq) |
| free_irq(chip->irq, chip->power_supply); |
| if (chip->gpio_detect) |
| gpio_free(chip->pdata->battery_detect); |
| |
| power_supply_unregister(chip->power_supply); |
| |
| cancel_delayed_work_sync(&chip->work); |
| |
| kfree(chip); |
| chip = NULL; |
| |
| return 0; |
| } |
| |
| #if defined CONFIG_PM_SLEEP |
| |
| static int sbs_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct sbs_info *chip = i2c_get_clientdata(client); |
| s32 ret; |
| |
| if (chip->poll_time > 0) |
| cancel_delayed_work_sync(&chip->work); |
| |
| /* write to manufacturer access with sleep command */ |
| ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr, |
| MANUFACTURER_ACCESS_SLEEP); |
| if (chip->is_present && ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL); |
| #define SBS_PM_OPS (&sbs_pm_ops) |
| |
| #else |
| #define SBS_PM_OPS NULL |
| #endif |
| |
| static const struct i2c_device_id sbs_id[] = { |
| { "bq20z75", 0 }, |
| { "sbs-battery", 1 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, sbs_id); |
| |
| static struct i2c_driver sbs_battery_driver = { |
| .probe = sbs_probe, |
| .remove = sbs_remove, |
| .id_table = sbs_id, |
| .driver = { |
| .name = "sbs-battery", |
| .of_match_table = of_match_ptr(sbs_dt_ids), |
| .pm = SBS_PM_OPS, |
| }, |
| }; |
| module_i2c_driver(sbs_battery_driver); |
| |
| MODULE_DESCRIPTION("SBS battery monitor driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(force_load, bool, S_IRUSR | S_IRGRP | S_IROTH); |
| MODULE_PARM_DESC(force_load, |
| "Attempt to load the driver even if no battery is connected"); |