| /* |
| * Samsung EXYNOS SoC series USB DRD PHY driver |
| * |
| * Phy provider for USB 3.0 DRD controller on Exynos SoC series |
| * |
| * Copyright (C) 2014 Samsung Electronics Co., Ltd. |
| * Author: Vivek Gautam <gautam.vivek@samsung.com> |
| * Minho Lee <minho55.lee@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/mutex.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mfd/syscon/exynos5-pmu.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/usb/samsung_usb.h> |
| #include <linux/usb/otg.h> |
| #if IS_ENABLED(CONFIG_EXYNOS_OTP) |
| #include <linux/exynos_otp.h> |
| #endif |
| #ifdef CONFIG_OF |
| #include <linux/of_gpio.h> |
| #endif |
| |
| #include "phy-exynos-usbdrd.h" |
| #include "phy-exynos-debug.h" |
| |
| extern int sm5713_get_usb_connect(void); |
| |
| static void exynos_usbdrd_check_connection(struct exynos_usbdrd_phy *phy_drd) |
| { |
| #if 0 |
| int usb_side; |
| |
| usb_side = sm5713_get_usb_connect(); |
| dev_info(phy_drd->dev, "USB is plugged in %d side...\n", usb_side); |
| |
| if (usb_side == 1) /* front */ |
| phy_drd->usbphy_info.used_phy_port = 1; |
| else if (usb_side == 0) |
| phy_drd->usbphy_info.used_phy_port = 0; |
| #endif |
| } |
| |
| static int exynos_usbdrd_clk_prepare(struct exynos_usbdrd_phy *phy_drd) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; phy_drd->clocks[i] != NULL; i++) { |
| ret = clk_prepare(phy_drd->clocks[i]); |
| if (ret) |
| goto err; |
| } |
| |
| if (phy_drd->use_phy_umux) { |
| for (i = 0; phy_drd->phy_clocks[i] != NULL; i++) { |
| ret = clk_prepare(phy_drd->phy_clocks[i]); |
| if (ret) |
| goto err1; |
| } |
| } |
| return 0; |
| |
| err1: |
| for (i = i - 1; i >= 0; i--) |
| clk_unprepare(phy_drd->phy_clocks[i]); |
| err: |
| for (i = i - 1; i >= 0; i--) |
| clk_unprepare(phy_drd->clocks[i]); |
| return ret; |
| } |
| |
| static int exynos_usbdrd_clk_enable(struct exynos_usbdrd_phy *phy_drd, |
| bool umux) |
| { |
| int i; |
| int ret; |
| |
| #ifdef CONFIG_SOC_EXYNOS7885 |
| clk_set_rate(phy_drd->ref_clk, 50 * 1000000); |
| #endif |
| |
| if (!phy_drd->use_phy_umux) { |
| for (i = 0; phy_drd->clocks[i] != NULL; i++) { |
| ret = clk_enable(phy_drd->clocks[i]); |
| if (ret) |
| goto err; |
| } |
| } else { |
| for (i = 0; phy_drd->phy_clocks[i] != NULL; i++) { |
| ret = clk_enable(phy_drd->phy_clocks[i]); |
| if (ret) |
| goto err1; |
| } |
| } |
| return 0; |
| |
| err1: |
| for (i = i - 1; i >= 0; i--) |
| clk_disable(phy_drd->phy_clocks[i]); |
| return ret; |
| err: |
| for (i = i - 1; i >= 0; i--) |
| clk_disable(phy_drd->clocks[i]); |
| return ret; |
| } |
| |
| static void exynos_usbdrd_clk_unprepare(struct exynos_usbdrd_phy *phy_drd) |
| { |
| int i; |
| |
| for (i = 0; phy_drd->clocks[i] != NULL; i++) |
| clk_unprepare(phy_drd->clocks[i]); |
| for (i = 0; phy_drd->phy_clocks[i] != NULL; i++) |
| clk_unprepare(phy_drd->phy_clocks[i]); |
| } |
| |
| static void exynos_usbdrd_clk_disable(struct exynos_usbdrd_phy *phy_drd, bool umux) |
| { |
| int i; |
| |
| if (!umux) { |
| for (i = 0; phy_drd->clocks[i] != NULL; i++) |
| clk_disable(phy_drd->clocks[i]); |
| } else { |
| for (i = 0; phy_drd->phy_clocks[i] != NULL; i++) |
| clk_disable(phy_drd->phy_clocks[i]); |
| } |
| } |
| static int exynos_usbdrd_phyclk_get(struct exynos_usbdrd_phy *phy_drd) |
| { |
| struct device *dev = phy_drd->dev; |
| const char **phyclk_ids; |
| const char **clk_ids; |
| const char *refclk_name; |
| struct clk *clk; |
| int phyclk_count; |
| int clk_count; |
| bool is_phyclk = false; |
| int clk_index = 0; |
| int i, j, ret; |
| |
| phyclk_count = of_property_count_strings(dev->of_node, "phyclk_mux"); |
| if (IS_ERR_VALUE((unsigned long)phyclk_count)) { |
| dev_err(dev, "invalid phyclk list in %s node\n", |
| dev->of_node->name); |
| return -EINVAL; |
| } |
| |
| phyclk_ids = (const char **)devm_kmalloc(dev, |
| (phyclk_count+1) * sizeof(const char *), |
| GFP_KERNEL); |
| for (i = 0; i < phyclk_count; i++) { |
| ret = of_property_read_string_index(dev->of_node, |
| "phyclk_mux", i, &phyclk_ids[i]); |
| if (ret) { |
| dev_err(dev, "failed to read phyclk_mux name %d from %s node\n", |
| i, dev->of_node->name); |
| return ret; |
| } |
| } |
| phyclk_ids[phyclk_count] = NULL; |
| |
| if (!strcmp("none", phyclk_ids[0])) { |
| dev_info(dev, "don't need user Mux for phyclk\n"); |
| phy_drd->use_phy_umux = false; |
| phyclk_count = 0; |
| |
| } else { |
| phy_drd->use_phy_umux = true; |
| |
| phy_drd->phy_clocks = (struct clk **) devm_kmalloc(dev, |
| (phyclk_count+1) * sizeof(struct clk *), |
| GFP_KERNEL); |
| if (!phy_drd->phy_clocks) { |
| dev_err(dev, "failed to alloc : phy clocks\n"); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; phyclk_ids[i] != NULL; i++) { |
| clk = devm_clk_get(dev, phyclk_ids[i]); |
| if (IS_ERR_OR_NULL(clk)) { |
| dev_err(dev, "couldn't get %s clock\n", phyclk_ids[i]); |
| return -EINVAL; |
| } |
| phy_drd->phy_clocks[i] = clk; |
| } |
| |
| phy_drd->phy_clocks[i] = NULL; |
| } |
| |
| clk_count = of_property_count_strings(dev->of_node, "clock-names"); |
| if (IS_ERR_VALUE((unsigned long)clk_count)) { |
| dev_err(dev, "invalid clk list in %s node", dev->of_node->name); |
| return -EINVAL; |
| } |
| clk_ids = (const char **)devm_kmalloc(dev, |
| (clk_count + 1) * sizeof(const char *), |
| GFP_KERNEL); |
| for (i = 0; i < clk_count; i++) { |
| ret = of_property_read_string_index(dev->of_node, "clock-names", |
| i, &clk_ids[i]); |
| if (ret) { |
| dev_err(dev, "failed to read clocks name %d from %s node\n", |
| i, dev->of_node->name); |
| return ret; |
| } |
| } |
| clk_ids[clk_count] = NULL; |
| |
| phy_drd->clocks = (struct clk **) devm_kmalloc(dev, |
| (clk_count + 1) * sizeof(struct clk *), GFP_KERNEL); |
| if (!phy_drd->clocks) { |
| dev_err(dev, "failed to alloc for clocks\n"); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; clk_ids[i] != NULL; i++) { |
| if (phyclk_count) { |
| for (j = 0; phyclk_ids[j] != NULL; j++) { |
| if (!strcmp(phyclk_ids[j], clk_ids[i])) { |
| is_phyclk = true; |
| phyclk_count--; |
| } |
| } |
| } |
| if (!is_phyclk) { |
| clk = devm_clk_get(dev, clk_ids[i]); |
| if (IS_ERR_OR_NULL(clk)) { |
| dev_err(dev, "couldn't get %s clock\n", clk_ids[i]); |
| return -EINVAL; |
| } |
| phy_drd->clocks[clk_index] = clk; |
| clk_index++; |
| } |
| is_phyclk = false; |
| } |
| phy_drd->clocks[clk_index] = NULL; |
| |
| ret = of_property_read_string_index(dev->of_node, |
| "phy_refclk", 0, &refclk_name); |
| if (ret) { |
| dev_err(dev, "failed to read ref_clocks name from %s node\n", |
| dev->of_node->name); |
| return ret; |
| } |
| |
| if (!strcmp("none", refclk_name)) { |
| dev_err(dev, "phy reference clock shouldn't be omitted"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; clk_ids[i] != NULL; i++) { |
| if (!strcmp(clk_ids[i], refclk_name)) { |
| phy_drd->ref_clk = devm_clk_get(dev, refclk_name); |
| break; |
| } |
| } |
| |
| if (IS_ERR_OR_NULL(phy_drd->ref_clk)) { |
| dev_err(dev, "%s couldn't get ref_clk", __func__); |
| return -EINVAL; |
| } |
| |
| devm_kfree(dev, phyclk_ids); |
| devm_kfree(dev, clk_ids); |
| |
| return 0; |
| |
| } |
| |
| static int exynos_usbdrd_clk_get(struct exynos_usbdrd_phy *phy_drd) |
| { |
| struct device *dev = phy_drd->dev; |
| int ret; |
| |
| ret = exynos_usbdrd_phyclk_get(phy_drd); |
| if (ret < 0) { |
| dev_err(dev, "failed to get clock for DRD USBPHY"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static inline |
| struct exynos_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst) |
| { |
| return container_of((inst), struct exynos_usbdrd_phy, |
| phys[(inst)->index]); |
| } |
| |
| #if IS_ENABLED(CONFIG_EXYNOS_OTP) |
| void exynos_usbdrd_phy_get_otp_info(struct exynos_usbdrd_phy *phy_drd) |
| { |
| struct tune_bits *data; |
| u16 magic; |
| u8 type; |
| u8 index_count; |
| u8 i, j; |
| |
| phy_drd->otp_index[0] = phy_drd->otp_index[1] = 0; |
| |
| for (i = 0; i < OTP_SUPPORT_USBPHY_NUMBER; i++) { |
| magic = i ? OTP_MAGIC_USB2 : OTP_MAGIC_USB3; |
| |
| if (otp_tune_bits_parsed(magic, &type, &index_count, &data)) { |
| dev_err(phy_drd->dev, "%s failed to get usb%d otp\n", |
| __func__, i ? 2 : 3); |
| continue; |
| } |
| dev_info(phy_drd->dev, "usb[%d] otp index_count: %d\n", |
| i, index_count); |
| |
| if (!index_count) { |
| phy_drd->otp_data[i] = NULL; |
| continue; |
| } |
| |
| phy_drd->otp_data[i] = devm_kzalloc(phy_drd->dev, |
| sizeof(*data) * index_count, GFP_KERNEL); |
| if (!phy_drd->otp_data[i]) |
| continue; |
| |
| phy_drd->otp_index[i] = index_count; |
| phy_drd->otp_type[i] = type ? 4 : 1; |
| dev_info(phy_drd->dev, "usb[%d] otp type: %d\n", i, type); |
| |
| for (j = 0; j < index_count; j++) { |
| phy_drd->otp_data[i][j].index = data[j].index; |
| phy_drd->otp_data[i][j].value = data[j].value; |
| dev_dbg(phy_drd->dev, |
| "usb[%d][%d] otp_data index:%d, value:0x%08x\n", |
| i, j, phy_drd->otp_data[i][j].index, |
| phy_drd->otp_data[i][j].value); |
| } |
| } |
| } |
| #endif |
| |
| /* |
| * exynos_rate_to_clk() converts the supplied clock rate to the value that |
| * can be written to the phy register. |
| */ |
| static unsigned int exynos_rate_to_clk(struct exynos_usbdrd_phy *phy_drd) |
| { |
| int ret; |
| |
| #ifdef CONFIG_SOC_EXYNOS7885 |
| clk_set_rate(phy_drd->ref_clk, 50 * 1000000); |
| #endif |
| |
| ret = clk_prepare_enable(phy_drd->ref_clk); |
| if (ret) { |
| dev_err(phy_drd->dev, "%s failed to enable ref_clk", __func__); |
| return 0; |
| } |
| |
| /* EXYNOS_FSEL_MASK */ |
| switch (clk_get_rate(phy_drd->ref_clk)) { |
| case 9600 * KHZ: |
| phy_drd->extrefclk = EXYNOS_FSEL_9MHZ6; |
| break; |
| case 10 * MHZ: |
| phy_drd->extrefclk = EXYNOS_FSEL_10MHZ; |
| break; |
| case 12 * MHZ: |
| phy_drd->extrefclk = EXYNOS_FSEL_12MHZ; |
| break; |
| case 19200 * KHZ: |
| phy_drd->extrefclk = EXYNOS_FSEL_19MHZ2; |
| break; |
| case 20 * MHZ: |
| phy_drd->extrefclk = EXYNOS_FSEL_20MHZ; |
| break; |
| case 24 * MHZ: |
| phy_drd->extrefclk = EXYNOS_FSEL_24MHZ; |
| break; |
| case 26 * MHZ: |
| phy_drd->extrefclk = EXYNOS_FSEL_26MHZ; |
| break; |
| case 50 * MHZ: |
| phy_drd->extrefclk = EXYNOS_FSEL_50MHZ; |
| break; |
| default: |
| phy_drd->extrefclk = 0; |
| clk_disable_unprepare(phy_drd->ref_clk); |
| return -EINVAL; |
| } |
| |
| clk_disable_unprepare(phy_drd->ref_clk); |
| |
| return 0; |
| } |
| |
| |
| static void exynos_usbdrd_usb_txco_enable(struct phy_usb_instance *inst, int on) |
| { |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| void __iomem *base; |
| u32 reg; |
| |
| base = ioremap(0x11860000, 0x100000); |
| if(!base) { |
| dev_err(phy_drd->dev, "[%s] Unable to map I/O memory\n", |
| __func__); |
| return; |
| } |
| reg = readl(base + EXYNOS_USBDEV_PHY_CONTROL); |
| |
| dev_info(phy_drd->dev, "[%s] ++USB DEVCTRL reg 0x%x \n", |
| __func__, reg); |
| |
| if (!on) { |
| reg |= ENABLE_TCXO_BUF_MASK; |
| } else { |
| reg &= ~ENABLE_TCXO_BUF_MASK; |
| } |
| writel(reg, base + EXYNOS_USBDEV_PHY_CONTROL); |
| |
| reg = readl(base + EXYNOS_USBDEV_PHY_CONTROL); |
| dev_info(phy_drd->dev, "[%s] --USB DEVCTRL reg 0x%x \n", |
| __func__, reg); |
| iounmap(base); |
| } |
| |
| static void exynos_usbdrd_pipe3_phy_isol(struct phy_usb_instance *inst, |
| unsigned int on, unsigned int mask) |
| { |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| unsigned int val; |
| |
| if (phy_drd->usb3phy_isolation == 1) |
| return; |
| |
| if (!inst->reg_pmu) |
| return; |
| |
| val = on ? 0 : mask; |
| |
| dev_info(phy_drd->dev, "[%s] val : 0x%x / mask : 0x%x \n", |
| __func__, val, mask); |
| regmap_update_bits(inst->reg_pmu, inst->pmu_offset, |
| mask, val); |
| |
| /* Enable TCXO_USB */ |
| val = on ? 0 : ENABLE_TCXO_BUF_MASK; |
| regmap_update_bits(inst->reg_pmu, inst->pmu_offset, |
| ENABLE_TCXO_BUF_MASK, val); |
| |
| /* exynos_usbdrd_usb_txco_enable(inst, on); */ |
| } |
| |
| static void exynos_usbdrd_utmi_phy_isol(struct phy_usb_instance *inst, |
| unsigned int on, unsigned int mask) |
| { |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| unsigned int val; |
| |
| if (!inst->reg_pmu) |
| return; |
| |
| val = on ? 0 : mask; |
| |
| dev_info(phy_drd->dev, "[%s] val : 0x%x / mask : 0x%x \n", |
| __func__, val, mask); |
| regmap_update_bits(inst->reg_pmu, inst->pmu_offset, |
| mask, val); |
| |
| exynos_usbdrd_usb_txco_enable(inst, on); |
| } |
| |
| /* |
| * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock |
| * from clock core. Further sets multiplier values and spread spectrum |
| * clock settings for SuperSpeed operations. |
| */ |
| static unsigned int |
| exynos_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) |
| { |
| return 0; |
| } |
| |
| /* |
| * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock |
| * from clock core. Further sets the FSEL values for HighSpeed operations. |
| */ |
| static unsigned int |
| exynos_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) |
| { |
| static u32 reg; |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| /* PHYCLKRST setting isn't required in Combo PHY */ |
| if (phy_drd->usbphy_info.version >= EXYNOS_USBPHY_VER_02_0_0) |
| return -EINVAL; |
| |
| /* restore any previous reference clock settings */ |
| reg = readl(phy_drd->reg_phy + EXYNOS_DRD_PHYCLKRST); |
| |
| reg &= ~PHYCLKRST_REFCLKSEL_MASK; |
| reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; |
| |
| reg &= ~PHYCLKRST_FSEL_UTMI_MASK | |
| PHYCLKRST_MPLL_MULTIPLIER_MASK | |
| PHYCLKRST_SSC_REFCLKSEL_MASK; |
| reg |= PHYCLKRST_FSEL(phy_drd->extrefclk); |
| |
| return reg; |
| } |
| |
| #ifdef OLD_FASHIONED_PHY_TUNE |
| /* |
| * Sets the default PHY tuning values for high-speed connection. |
| */ |
| static int exynos_usbdrd_fill_hstune(struct exynos_usbdrd_phy *phy_drd, |
| struct device_node *node) |
| { |
| struct device *dev = phy_drd->dev; |
| struct exynos_usbphy_hs_tune *hs_tune = phy_drd->hs_value; |
| int ret; |
| u32 res[2]; |
| u32 value; |
| |
| ret = of_property_read_u32_array(node, "tx_vref", res, 2); |
| if (ret == 0) { |
| hs_tune[0].tx_vref = res[0]; |
| hs_tune[1].tx_vref = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_vref value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_pre_emp", res, 2); |
| if (ret == 0) { |
| hs_tune[0].tx_pre_emp = res[0]; |
| hs_tune[1].tx_pre_emp = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_pre_emp value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_pre_emp_puls", res, 2); |
| if (ret == 0) { |
| hs_tune[0].tx_pre_emp_puls = res[0]; |
| hs_tune[1].tx_pre_emp_puls = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_pre_emp_puls value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_res", res, 2); |
| if (ret == 0) { |
| hs_tune[0].tx_res = res[0]; |
| hs_tune[1].tx_res = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_res value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_rise", res, 2); |
| if (ret == 0) { |
| hs_tune[0].tx_rise = res[0]; |
| hs_tune[1].tx_rise = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_rise value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_hsxv", res, 2); |
| if (ret == 0) { |
| hs_tune[0].tx_hsxv = res[0]; |
| hs_tune[1].tx_hsxv = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_hsxv value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_fsls", res, 2); |
| if (ret == 0) { |
| hs_tune[0].tx_fsls = res[0]; |
| hs_tune[1].tx_fsls = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_fsls value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "rx_sqrx", res, 2); |
| if (ret == 0) { |
| hs_tune[0].rx_sqrx = res[0]; |
| hs_tune[1].rx_sqrx = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_sqrx value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "compdis", res, 2); |
| if (ret == 0) { |
| hs_tune[0].compdis = res[0]; |
| hs_tune[1].compdis = res[1]; |
| } else { |
| dev_err(dev, "can't get compdis value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "otg", res, 2); |
| if (ret == 0) { |
| hs_tune[0].otg = res[0]; |
| hs_tune[1].otg = res[1]; |
| } else { |
| dev_err(dev, "can't get otg_tune value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "enable_user_imp", res, 2); |
| if (ret == 0) { |
| if (res[0]) { |
| hs_tune[0].enable_user_imp = true; |
| hs_tune[1].enable_user_imp = true; |
| hs_tune[0].user_imp_value = res[1]; |
| hs_tune[1].user_imp_value = res[1]; |
| } else { |
| hs_tune[0].enable_user_imp = false; |
| hs_tune[1].enable_user_imp = false; |
| } |
| } else { |
| dev_err(dev, "can't get enable_user_imp value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32(node, "is_phyclock", &value); |
| if (ret == 0) { |
| if (value == 1) { |
| hs_tune[0].utmi_clk = USBPHY_UTMI_PHYCLOCK; |
| hs_tune[1].utmi_clk = USBPHY_UTMI_PHYCLOCK; |
| } else { |
| hs_tune[0].utmi_clk = USBPHY_UTMI_FREECLOCK; |
| hs_tune[1].utmi_clk = USBPHY_UTMI_FREECLOCK; |
| } |
| } else { |
| dev_err(dev, "can't get is_phyclock value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Sets the default PHY tuning values for super-speed connection. |
| */ |
| static int exynos_usbdrd_fill_sstune(struct exynos_usbdrd_phy *phy_drd, |
| struct device_node *node) |
| { |
| struct device *dev = phy_drd->dev; |
| struct exynos_usbphy_ss_tune *ss_tune = phy_drd->ss_value; |
| u32 res[2]; |
| int ret; |
| |
| ret = of_property_read_u32_array(node, "tx_boost_level", res, 2); |
| if (ret == 0) { |
| ss_tune[0].tx_boost_level = res[0]; |
| ss_tune[1].tx_boost_level = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_boost_level value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_swing_level", res, 2); |
| if (ret == 0) { |
| ss_tune[0].tx_swing_level = res[0]; |
| ss_tune[1].tx_swing_level = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_swing_level value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_swing_full", res, 2); |
| if (ret == 0) { |
| ss_tune[0].tx_swing_full = res[0]; |
| ss_tune[1].tx_swing_full = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_swing_full value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_swing_low", res, 2); |
| if (ret == 0) { |
| ss_tune[0].tx_swing_low = res[0]; |
| ss_tune[1].tx_swing_low = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_swing_low value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_deemphasis_mode", res, 2); |
| if (ret == 0) { |
| ss_tune[0].tx_deemphasis_mode = res[0]; |
| ss_tune[1].tx_deemphasis_mode = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_deemphasis_mode value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_deemphasis_3p5db", res, 2); |
| if (ret == 0) { |
| ss_tune[0].tx_deemphasis_3p5db = res[0]; |
| ss_tune[1].tx_deemphasis_3p5db = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_deemphasis_3p5db value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "tx_deemphasis_6db", res, 2); |
| if (ret == 0) { |
| ss_tune[0].tx_deemphasis_6db = res[0]; |
| ss_tune[1].tx_deemphasis_6db = res[1]; |
| } else { |
| dev_err(dev, "can't get tx_deemphasis_6db value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "enable_ssc", res, 2); |
| if (ret == 0) { |
| ss_tune[0].enable_ssc = res[0]; |
| ss_tune[1].enable_ssc = res[1]; |
| } else { |
| dev_err(dev, "can't get enable_ssc value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "ssc_range", res, 2); |
| if (ret == 0) { |
| ss_tune[0].ssc_range = res[0]; |
| ss_tune[1].ssc_range = res[1]; |
| } else { |
| dev_err(dev, "can't get ssc_range value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "los_bias", res, 2); |
| if (ret == 0) { |
| ss_tune[0].los_bias = res[0]; |
| ss_tune[1].los_bias = res[1]; |
| } else { |
| dev_err(dev, "can't get los_bias value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "los_mask_val", res, 2); |
| if (ret == 0) { |
| ss_tune[0].los_mask_val = res[0]; |
| ss_tune[1].los_mask_val = res[1]; |
| } else { |
| dev_err(dev, "can't get los_mask_val value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "enable_fixed_rxeq_mode", res, 2); |
| if (ret == 0) { |
| ss_tune[0].enable_fixed_rxeq_mode = res[0]; |
| ss_tune[1].enable_fixed_rxeq_mode = res[1]; |
| } else { |
| dev_err(dev, "can't get enable_fixed_rxeq_mode value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "fix_rxeq_value", res, 2); |
| if (ret == 0) { |
| ss_tune[0].fix_rxeq_value = res[0]; |
| ss_tune[1].fix_rxeq_value = res[1]; |
| } else { |
| dev_err(dev, "can't get fix_rxeq_value value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "set_crport_level_en", res, 2); |
| if (ret == 0) { |
| ss_tune[0].set_crport_level_en = res[0]; |
| ss_tune[1].set_crport_level_en = res[1]; |
| } else { |
| dev_err(dev, "can't get set_crport_level_en value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(node, "set_crport_mpll_charge_pump", res, 2); |
| if (ret == 0) { |
| ss_tune[0].set_crport_mpll_charge_pump = res[0]; |
| ss_tune[1].set_crport_mpll_charge_pump = res[1]; |
| } else { |
| dev_err(dev, "can't get set_crport_mpll_charge_pump value, error = %d\n", ret); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static int exynos_usbdrd_fill_hstune_param(struct exynos_usbdrd_phy *phy_drd, |
| struct device_node *node) |
| { |
| struct device *dev = phy_drd->dev; |
| struct device_node *child = NULL; |
| struct exynos_usb_tune_param *hs_tune_param; |
| size_t size = sizeof(struct exynos_usb_tune_param); |
| int ret; |
| u32 res[2]; |
| u32 param_index = 0; |
| const char *name; |
| |
| ret = of_property_read_u32_array(node, "hs_tune_cnt", &res[0], 1); |
| |
| dev_info(dev, "%s hs tune cnt = %d\n", __func__, res[0]); |
| |
| hs_tune_param = devm_kzalloc(dev, size*(res[0]+1), GFP_KERNEL); |
| if (hs_tune_param == NULL) |
| return -ENOMEM; |
| |
| phy_drd->usbphy_info.tune_param = hs_tune_param; |
| |
| for_each_child_of_node(node, child) { |
| ret = of_property_read_string(child, "tune_name", &name); |
| if (ret == 0) { |
| memcpy(hs_tune_param[param_index].name, name, strlen(name)); |
| } else { |
| dev_err(dev, "failed to read hs tune name from %s node\n", child->name); |
| return ret; |
| } |
| |
| ret = of_property_read_u32_array(child, "tune_value", res, 2); |
| if (ret == 0) { |
| phy_drd->hs_tune_param_value[param_index][0] = res[0]; |
| phy_drd->hs_tune_param_value[param_index][1] = res[1]; |
| } else { |
| dev_err(dev, "failed to read hs tune value from %s node\n", child->name); |
| return -EINVAL; |
| } |
| param_index++; |
| } |
| |
| hs_tune_param[param_index].value = EXYNOS_USB_TUNE_LAST; |
| |
| return 0; |
| } |
| |
| /* |
| * Sets the default PHY tuning values for super-speed connection. |
| */ |
| static int exynos_usbdrd_fill_sstune_param(struct exynos_usbdrd_phy *phy_drd, |
| struct device_node *node) |
| { |
| struct device *dev = phy_drd->dev; |
| struct device_node *child = NULL; |
| struct exynos_usb_tune_param *ss_tune_param; |
| size_t size = sizeof(struct exynos_usb_tune_param); |
| int ret; |
| u32 res[2]; |
| u32 param_index = 0; |
| const char *name; |
| |
| ret = of_property_read_u32_array(node, "ss_tune_cnt", &res[0], 1); |
| |
| dev_info(dev, "%s ss tune cnt = %d\n", __func__, res[0]); |
| |
| ss_tune_param = devm_kzalloc(dev, size*res[0], GFP_KERNEL); |
| if (ss_tune_param == NULL) |
| return -ENOMEM; |
| |
| phy_drd->usbphy_sub_info.tune_param = ss_tune_param; |
| for_each_child_of_node(node, child) { |
| ret = of_property_read_string(child, "tune_name", &name); |
| if (ret == 0) |
| memcpy(ss_tune_param[param_index].name, name, strlen(name)); |
| else { |
| dev_err(dev, "failed to read ss tune name from %s node\n", child->name); |
| return ret; |
| } |
| |
| ret = of_property_read_u32_array(child, "tune_value", res, 2); |
| if (ret == 0) { |
| ss_tune_param[param_index].value = res[0]; |
| } else { |
| dev_err(dev, "failed to read ss tune value from %s node\n", child->name); |
| return -EINVAL; |
| } |
| param_index++; |
| } |
| |
| ss_tune_param[param_index].value = EXYNOS_USB_TUNE_LAST; |
| |
| return 0; |
| } |
| |
| static int exynos_usbdrd_get_phy_refsel(struct exynos_usbdrd_phy *phy_drd) |
| { |
| struct device *dev = phy_drd->dev; |
| struct device_node *node = dev->of_node; |
| int value, ret; |
| int check_flag = 0; |
| |
| ret = of_property_read_u32(node, "phy_refsel_clockcore", &value); |
| if (ret < 0) { |
| dev_err(dev, "can't get phy_refsel_clockcore, error = %d\n", ret); |
| return ret; |
| } |
| |
| if (value == 1) { |
| phy_drd->usbphy_info.refsel = USBPHY_REFSEL_CLKCORE; |
| phy_drd->usbphy_sub_info.refsel = USBPHY_REFSEL_CLKCORE; |
| } else { |
| check_flag++; |
| } |
| |
| ret = of_property_read_u32(node, "phy_refsel_ext_osc", &value); |
| if (ret < 0) { |
| dev_err(dev, "can't get phy_refsel_ext_osc, error = %d\n", ret); |
| return ret; |
| } |
| |
| if (value == 1) { |
| phy_drd->usbphy_info.refsel = USBPHY_REFSEL_EXT_OSC; |
| phy_drd->usbphy_sub_info.refsel = USBPHY_REFSEL_EXT_OSC; |
| } else { |
| check_flag++; |
| } |
| |
| ret = of_property_read_u32(node, "phy_refsel_xtal", &value); |
| if (ret < 0) { |
| dev_err(dev, "can't get phy_refsel_xtal, error = %d\n", ret); |
| return ret; |
| } |
| |
| if (value == 1) { |
| phy_drd->usbphy_info.refsel = USBPHY_REFSEL_EXT_XTAL; |
| phy_drd->usbphy_sub_info.refsel = USBPHY_REFSEL_EXT_XTAL; |
| } else { |
| check_flag++; |
| } |
| |
| ret = of_property_read_u32(node, "phy_refsel_diff_pad", &value); |
| if (ret < 0) { |
| dev_err(dev, "can't get phy_refsel_diff_pad, error = %d\n", ret); |
| return ret; |
| } |
| |
| if (value == 1) { |
| phy_drd->usbphy_info.refsel = USBPHY_REFSEL_DIFF_PAD; |
| phy_drd->usbphy_sub_info.refsel = USBPHY_REFSEL_DIFF_PAD; |
| } else { |
| check_flag++; |
| } |
| |
| ret = of_property_read_u32(node, "phy_refsel_diff_internal", &value); |
| if (ret < 0) { |
| dev_err(dev, "can't get phy_refsel_diff_internal, error = %d\n", ret); |
| return ret; |
| } |
| |
| if (value == 1) { |
| phy_drd->usbphy_info.refsel = USBPHY_REFSEL_DIFF_INTERNAL; |
| phy_drd->usbphy_sub_info.refsel = USBPHY_REFSEL_DIFF_INTERNAL; |
| } else { |
| check_flag++; |
| } |
| |
| ret = of_property_read_u32(node, "phy_refsel_diff_single", &value); |
| if (ret < 0) { |
| dev_err(dev, "can't get phy_refsel_diff_single, error = %d\n", ret); |
| return ret; |
| } |
| |
| if (value == 1) { |
| phy_drd->usbphy_info.refsel = USBPHY_REFSEL_DIFF_SINGLE; |
| phy_drd->usbphy_sub_info.refsel = USBPHY_REFSEL_DIFF_SINGLE; |
| } else { |
| check_flag++; |
| } |
| |
| if (check_flag > 5) { |
| dev_err(dev, "USB refsel Must be choosed\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int exynos_usbdrd_get_sub_phyinfo(struct exynos_usbdrd_phy *phy_drd) |
| { |
| struct device *dev = phy_drd->dev; |
| struct device_node *tune_node; |
| int ret; |
| int value; |
| |
| if (!of_property_read_u32(dev->of_node, "sub_phy_version", &value)) { |
| phy_drd->usbphy_sub_info.version = value; |
| } else { |
| dev_err(dev, "can't get sub_phy_version\n"); |
| return -EINVAL; |
| } |
| phy_drd->usbphy_sub_info.refclk = phy_drd->extrefclk; |
| phy_drd->usbphy_sub_info.regs_base = phy_drd->reg_phy2; |
| phy_drd->usbphy_sub_info.regs_base_2nd = phy_drd->reg_phy3; |
| |
| /* |
| * use PHY of samsung |
| */ |
| tune_node = of_parse_phandle(dev->of_node, "ss_tune_param", 0); |
| if (tune_node != NULL) { |
| ret = exynos_usbdrd_fill_sstune_param(phy_drd, tune_node); |
| if (ret < 0) { |
| dev_err(dev, "can't fill super speed tuning param\n"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int exynos_usbdrd_get_phyinfo(struct exynos_usbdrd_phy *phy_drd) |
| { |
| struct device *dev = phy_drd->dev; |
| struct device_node *tune_node; |
| int ret; |
| int value; |
| |
| if (!of_property_read_u32(dev->of_node, "phy_version", &value)) { |
| phy_drd->usbphy_info.version = value; |
| } else { |
| dev_err(dev, "can't get phy_version\n"); |
| return -EINVAL; |
| } |
| |
| if (!of_property_read_u32(dev->of_node, "use_io_for_ovc", &value)) { |
| phy_drd->usbphy_info.use_io_for_ovc = value ? true : false; |
| } else { |
| dev_err(dev, "can't get io_for_ovc\n"); |
| return -EINVAL; |
| } |
| |
| if (!of_property_read_u32(dev->of_node, "common_block_disable", &value)) { |
| phy_drd->usbphy_info.common_block_disable = value ? true : false; |
| } else { |
| dev_err(dev, "can't get common_block_disable\n"); |
| return -EINVAL; |
| } |
| |
| phy_drd->usbphy_info.refclk = phy_drd->extrefclk; |
| phy_drd->usbphy_info.regs_base = phy_drd->reg_phy; |
| |
| if (!of_property_read_u32(dev->of_node, "is_not_vbus_pad", &value)) { |
| phy_drd->usbphy_info.not_used_vbus_pad = value ? true : false; |
| } else { |
| dev_err(dev, "can't get vbus_pad\n"); |
| return -EINVAL; |
| } |
| if (!of_property_read_u32(dev->of_node, "used_phy_port", &value)) { |
| phy_drd->usbphy_info.used_phy_port = value ? true : false; |
| } else { |
| dev_err(dev, "can't get used_phy_port\n"); |
| return -EINVAL; |
| } |
| |
| ret = exynos_usbdrd_get_phy_refsel(phy_drd); |
| if (ret < 0) |
| dev_err(dev, "can't get phy refsel\n"); |
| |
| #ifdef OLD_FASHIONED_PHY_TUNE |
| /* |
| * use PHY of synopsys |
| */ |
| tune_node = of_parse_phandle(dev->of_node, "ss_tune_info", 0); |
| if (tune_node == NULL) |
| dev_info(dev, "don't need usbphy tuning info for super speed\n"); |
| |
| if (of_device_is_available(tune_node)) { |
| ret = exynos_usbdrd_fill_sstune(phy_drd, tune_node); |
| if (ret < 0) { |
| dev_err(dev, "can't fill super speed tuning info\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * use PHY of synopsys |
| */ |
| tune_node = of_parse_phandle(dev->of_node, "hs_tune_info", 0); |
| if (tune_node == NULL) |
| dev_info(dev, "don't need usbphy tuning info for high speed\n"); |
| |
| if (of_device_is_available(tune_node)) { |
| ret = exynos_usbdrd_fill_hstune(phy_drd, tune_node); |
| if (ret < 0) { |
| dev_err(dev, "can't fill high speed tuning info\n"); |
| return -EINVAL; |
| } |
| } |
| #endif |
| |
| /* |
| * use PHY of synopsys |
| */ |
| tune_node = of_parse_phandle(dev->of_node, "ss_tune_param", 0); |
| if (tune_node != NULL) { |
| ret = exynos_usbdrd_fill_sstune_param(phy_drd, tune_node); |
| if (ret < 0) { |
| dev_err(dev, "can't fill super speed tuning param\n"); |
| return -EINVAL; |
| } |
| } else { |
| dev_info(dev, "don't need usbphy tuning param for super speed\n"); |
| } |
| |
| /* |
| * use PHY of samsung |
| */ |
| tune_node = of_parse_phandle(dev->of_node, "hs_tune_param", 0); |
| if (tune_node != NULL) { |
| ret = exynos_usbdrd_fill_hstune_param(phy_drd, tune_node); |
| if (ret < 0) { |
| dev_err(dev, "can't fill high speed tuning param\n"); |
| return -EINVAL; |
| } |
| } else { |
| dev_info(dev, "don't need usbphy tuning param for high speed\n"); |
| } |
| |
| dev_info(phy_drd->dev, "usbphy info: version:0x%x, refclk:0x%x\n", |
| phy_drd->usbphy_info.version, phy_drd->usbphy_info.refclk); |
| |
| return 0; |
| } |
| |
| static int exynos_usbdrd_get_iptype(struct exynos_usbdrd_phy *phy_drd) |
| { |
| struct device *dev = phy_drd->dev; |
| int ret, value; |
| |
| ret = of_property_read_u32(dev->of_node, "ip_type", &value); |
| if (ret) { |
| dev_err(dev, "can't get ip type"); |
| return ret; |
| } |
| |
| switch (value) { |
| case TYPE_USB3DRD: |
| phy_drd->ip_type = TYPE_USB3DRD; |
| dev_info(dev, "It is TYPE USB3DRD"); |
| break; |
| case TYPE_USB3HOST: |
| phy_drd->ip_type = TYPE_USB3HOST; |
| dev_info(dev, "It is TYPE USB3HOST"); |
| break; |
| case TYPE_USB2DRD: |
| phy_drd->ip_type = TYPE_USB2DRD; |
| dev_info(dev, "It is TYPE USB2DRD"); |
| break; |
| case TYPE_USB2HOST: |
| phy_drd->ip_type = TYPE_USB2HOST; |
| dev_info(dev, "It is TYPE USB2HOST"); |
| default: |
| break; |
| } |
| |
| if (!of_property_read_u32(dev->of_node, "usb3phy-isolation", &value)) { |
| if (value == 1) |
| dev_info(dev, "USB3.0 PHY Isolation is ENABLED!!!\n"); |
| phy_drd->usb3phy_isolation = value; |
| } else { |
| phy_drd->usb3phy_isolation = 0; |
| } |
| |
| return 0; |
| } |
| |
| static void exynos_usbdrd_pipe3_init(struct exynos_usbdrd_phy *phy_drd) |
| { |
| if (phy_drd->usb3phy_isolation == 1) { |
| dev_info(phy_drd->dev, "USB3.0 PHY is isolated...\n"); |
| return; |
| } |
| |
| exynos_usbdrd_check_connection(phy_drd); |
| phy_exynos_usb_v3p1_enable(&phy_drd->usbphy_info); |
| } |
| |
| static void exynos_usbdrd_utmi_init(struct exynos_usbdrd_phy *phy_drd) |
| { |
| int ret; |
| struct phy_usb_instance *inst = &phy_drd->phys[0]; |
| #if IS_ENABLED(CONFIG_EXYNOS_OTP) |
| struct tune_bits *otp_data; |
| u8 otp_type; |
| u8 otp_index; |
| u8 i; |
| #endif |
| pr_info("%s: +++\n", __func__); |
| |
| if (gpio_is_valid(phy_drd->phy_port)) { |
| phy_drd->usbphy_info.used_phy_port = !gpio_get_value(phy_drd->phy_port); |
| dev_info(phy_drd->dev, "%s: phy port[%d]\n", __func__, |
| phy_drd->usbphy_info.used_phy_port); |
| } |
| |
| inst->phy_cfg->phy_isol(inst, 0, inst->pmu_mask); |
| |
| ret = exynos_usbdrd_clk_enable(phy_drd, false); |
| if (ret) { |
| dev_err(phy_drd->dev, "%s: Failed to enable clk\n", __func__); |
| return; |
| } |
| |
| phy_exynos_usb_v3p1_enable(&phy_drd->usbphy_info); |
| /* |
| * The below function is used to block USB3.0 PHY. If you don't want to |
| * use USB3.0 PHY, add this function and comment phy_exynos_usbv3p1_pipe |
| * _ready(). |
| * |
| * phy_exynos_usb_v3p1_pipe_ovrd(&phy_drd->usbphy_info); |
| */ |
| |
| if (phy_drd->usb3phy_isolation == 1) |
| phy_exynos_usb_v3p1_pipe_ovrd(&phy_drd->usbphy_info); |
| else |
| phy_exynos_usb_v3p1_pipe_ready(&phy_drd->usbphy_info); |
| |
| if (phy_drd->use_phy_umux) { |
| /* USB User MUX enable */ |
| ret = exynos_usbdrd_clk_enable(phy_drd, true); |
| if (ret) { |
| dev_err(phy_drd->dev, "%s: Failed to enable clk\n", __func__); |
| return; |
| } |
| } |
| #if IS_ENABLED(CONFIG_EXYNOS_OTP) |
| if (phy_drd->ip_type < TYPE_USB2DRD) { |
| otp_type = phy_drd->otp_type[OTP_USB3PHY_INDEX]; |
| otp_index = phy_drd->otp_index[OTP_USB3PHY_INDEX]; |
| otp_data = phy_drd->otp_data[OTP_USB3PHY_INDEX]; |
| } else { |
| otp_type = phy_drd->otp_type[OTP_USB2PHY_INDEX]; |
| otp_index = phy_drd->otp_index[OTP_USB2PHY_INDEX]; |
| otp_data = phy_drd->otp_data[OTP_USB2PHY_INDEX]; |
| } |
| |
| for (i = 0; i < otp_index; i++) { |
| samsung_exynos_cal_usb3phy_write_register( |
| &phy_drd->usbphy_info, |
| otp_data[i].index * otp_type, |
| otp_data[i].value); |
| } |
| #endif |
| |
| pr_info("%s: ---\n", __func__); |
| } |
| |
| static int exynos_usbdrd_phy_init(struct phy *phy) |
| { |
| struct phy_usb_instance *inst = phy_get_drvdata(phy); |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| |
| /* UTMI or PIPE3 specific init */ |
| inst->phy_cfg->phy_init(phy_drd); |
| |
| return 0; |
| } |
| |
| static void exynos_usbdrd_pipe3_exit(struct exynos_usbdrd_phy *phy_drd) |
| { |
| pr_info("%s : Do nothing...\n", __func__); |
| } |
| |
| static void exynos_usbdrd_utmi_exit(struct exynos_usbdrd_phy *phy_drd) |
| { |
| struct phy_usb_instance *inst = &phy_drd->phys[0]; |
| |
| if (phy_drd->use_phy_umux) { |
| /*USB User MUX disable */ |
| exynos_usbdrd_clk_disable(phy_drd, true); |
| } |
| phy_exynos_usb_v3p1_disable(&phy_drd->usbphy_info); |
| |
| exynos_usbdrd_clk_disable(phy_drd, false); |
| |
| inst->phy_cfg->phy_isol(inst, 1, inst->pmu_mask); |
| } |
| |
| static int exynos_usbdrd_phy_exit(struct phy *phy) |
| { |
| struct phy_usb_instance *inst = phy_get_drvdata(phy); |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| |
| /* UTMI or PIPE3 specific exit */ |
| inst->phy_cfg->phy_exit(phy_drd); |
| |
| return 0; |
| } |
| |
| static void exynos_usbdrd_pipe3_tune(struct exynos_usbdrd_phy *phy_drd, |
| int phy_state) |
| { |
| struct exynos_usb_tune_param *ss_tune_param = |
| phy_drd->usbphy_info.ss_tune_param; |
| int i = 0; |
| |
| if (phy_drd->usb3phy_isolation == 1) |
| return; |
| |
| exynos_usbdrd_check_connection(phy_drd); |
| |
| dev_info(phy_drd->dev, "%s %s %d\n", __func__, ss_tune_param[0].name, |
| ss_tune_param[0].value); |
| |
| for (i = 0; ss_tune_param[i].value != EXYNOS_USB_TUNE_LAST; i++) |
| phy_exynos_usb_v3p1_tune_each(&phy_drd->usbphy_info, |
| ss_tune_param[i].name, ss_tune_param[i].value); |
| } |
| |
| static void exynos_usbdrd_utmi_tune(struct exynos_usbdrd_phy *phy_drd, |
| int phy_state) |
| { |
| struct exynos_usb_tune_param *hs_tune_param = phy_drd->usbphy_info.tune_param; |
| int i; |
| |
| dev_info(phy_drd->dev, "%s: device=%d\n", __func__, (phy_state >= OTG_STATE_A_IDLE)? 0 : 1); |
| |
| if (phy_state >= OTG_STATE_A_IDLE) { |
| /* for host mode */ |
| for (i = 0; hs_tune_param[i].value != EXYNOS_USB_TUNE_LAST; i++) { |
| if (i == EXYNOS_DRD_MAX_TUNEPARAM_NUM) |
| break; |
| hs_tune_param[i].value = phy_drd->hs_tune_param_value[i][USBPHY_MODE_HOST]; |
| } |
| } else { |
| /* for device mode */ |
| for (i = 0; hs_tune_param[i].value != EXYNOS_USB_TUNE_LAST; i++) { |
| if (i == EXYNOS_DRD_MAX_TUNEPARAM_NUM) |
| break; |
| hs_tune_param[i].value = phy_drd->hs_tune_param_value[i][USBPHY_MODE_DEV]; |
| } |
| } |
| |
| phy_exynos_usb_v3p1_tune(&phy_drd->usbphy_info); |
| |
| /* USB3P1 CAL code doesn't provide late_enable api */ |
| /* samsung_exynos_cal_usb3phy_late_enable(&phy_drd->usbphy_info); */ |
| } |
| |
| static int exynos_usbdrd_phy_tune(struct phy *phy, int phy_state) |
| { |
| struct phy_usb_instance *inst = phy_get_drvdata(phy); |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| |
| inst->phy_cfg->phy_tune(phy_drd, phy_state); |
| |
| return 0; |
| } |
| |
| static void exynos_usbdrd_pipe3_set(struct exynos_usbdrd_phy *phy_drd, |
| int option, void *info) |
| { |
| } |
| |
| static void exynos_usbdrd_utmi_set(struct exynos_usbdrd_phy *phy_drd, |
| int option, void *info) |
| { |
| switch (option) { |
| case SET_DPPULLUP_ENABLE: |
| #if 0 |
| phy_exynos_usb_v3p1_enable_dp_pullup( |
| &phy_drd->usbphy_info); |
| #endif |
| break; |
| case SET_DPPULLUP_DISABLE: |
| #if 0 |
| phy_exynos_usb_v3p1_disable_dp_pullup( |
| &phy_drd->usbphy_info); |
| #endif |
| break; |
| case SET_DPDM_PULLDOWN: |
| phy_exynos_usb_v3p1_config_host_mode( |
| &phy_drd->usbphy_info); |
| default: |
| break; |
| } |
| } |
| |
| static int exynos_usbdrd_phy_set(struct phy *phy, int option, void *info) |
| { |
| struct phy_usb_instance *inst = phy_get_drvdata(phy); |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| |
| inst->phy_cfg->phy_set(phy_drd, option, info); |
| |
| return 0; |
| } |
| |
| static int exynos_usbdrd_phy_power_on(struct phy *phy) |
| { |
| int ret; |
| struct phy_usb_instance *inst = phy_get_drvdata(phy); |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| |
| dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n"); |
| |
| /* Enable VBUS supply */ |
| if (phy_drd->vbus) { |
| ret = regulator_enable(phy_drd->vbus); |
| if (ret) { |
| dev_err(phy_drd->dev, "Failed to enable VBUS supply\n"); |
| return ret; |
| } |
| } |
| |
| inst->phy_cfg->phy_isol(inst, 0, inst->pmu_mask); |
| |
| return 0; |
| } |
| |
| static int exynos_usbdrd_phy_power_off(struct phy *phy) |
| { |
| struct phy_usb_instance *inst = phy_get_drvdata(phy); |
| struct exynos_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); |
| |
| dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n"); |
| |
| /* Disable VBUS supply */ |
| if (phy_drd->vbus) |
| regulator_disable(phy_drd->vbus); |
| |
| inst->phy_cfg->phy_isol(inst, 1, inst->pmu_mask); |
| |
| return 0; |
| } |
| |
| static struct phy *exynos_usbdrd_phy_xlate(struct device *dev, |
| struct of_phandle_args *args) |
| { |
| struct exynos_usbdrd_phy *phy_drd = dev_get_drvdata(dev); |
| |
| if (WARN_ON(args->args[0] > EXYNOS_DRDPHYS_NUM)) |
| return ERR_PTR(-ENODEV); |
| |
| return phy_drd->phys[args->args[0]].phy; |
| } |
| |
| static struct phy_ops exynos_usbdrd_phy_ops = { |
| .init = exynos_usbdrd_phy_init, |
| .exit = exynos_usbdrd_phy_exit, |
| .tune = exynos_usbdrd_phy_tune, |
| .set = exynos_usbdrd_phy_set, |
| .power_on = exynos_usbdrd_phy_power_on, |
| .power_off = exynos_usbdrd_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct exynos_usbdrd_phy_config phy_cfg_exynos[] = { |
| { |
| .id = EXYNOS_DRDPHY_UTMI, |
| .phy_isol = exynos_usbdrd_utmi_phy_isol, |
| .phy_init = exynos_usbdrd_utmi_init, |
| .phy_exit = exynos_usbdrd_utmi_exit, |
| .phy_tune = exynos_usbdrd_utmi_tune, |
| .phy_set = exynos_usbdrd_utmi_set, |
| .set_refclk = exynos_usbdrd_utmi_set_refclk, |
| }, |
| { |
| .id = EXYNOS_DRDPHY_PIPE3, |
| .phy_isol = exynos_usbdrd_pipe3_phy_isol, |
| .phy_init = exynos_usbdrd_pipe3_init, |
| .phy_exit = exynos_usbdrd_pipe3_exit, |
| .phy_tune = exynos_usbdrd_pipe3_tune, |
| .phy_set = exynos_usbdrd_pipe3_set, |
| .set_refclk = exynos_usbdrd_pipe3_set_refclk, |
| }, |
| }; |
| |
| static const struct exynos_usbdrd_phy_drvdata exynos_usbdrd_phy = { |
| .phy_cfg = phy_cfg_exynos, |
| }; |
| |
| static const struct of_device_id exynos_usbdrd_phy_of_match[] = { |
| { |
| .compatible = "samsung,exynos-usbdrd-phy", |
| .data = &exynos_usbdrd_phy |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match); |
| |
| static int exynos_usbdrd_phy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct exynos_usbdrd_phy *phy_drd; |
| struct phy_provider *phy_provider; |
| struct resource *res; |
| const struct of_device_id *match; |
| const struct exynos_usbdrd_phy_drvdata *drv_data; |
| struct phy_usb_instance *inst; |
| struct regmap *reg_pmu; |
| u32 pmu_offset, pmu_mask; |
| int i, ret; |
| |
| pr_info("%s: +++ %s\n", __func__, pdev->name); |
| phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL); |
| if (!phy_drd) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, phy_drd); |
| phy_drd->dev = dev; |
| |
| match = of_match_node(exynos_usbdrd_phy_of_match, pdev->dev.of_node); |
| |
| drv_data = match->data; |
| phy_drd->drv_data = drv_data; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| phy_drd->reg_phy = devm_ioremap_resource(dev, res); |
| if (IS_ERR(phy_drd->reg_phy)) |
| return PTR_ERR(phy_drd->reg_phy); |
| |
| ret = exynos_usbdrd_get_iptype(phy_drd); |
| if (ret) { |
| dev_err(dev, "%s: Failed to get ip_type\n", __func__); |
| return ret; |
| } |
| |
| ret = exynos_usbdrd_clk_get(phy_drd); |
| if (ret) { |
| dev_err(dev, "%s: Failed to get clocks\n", __func__); |
| return ret; |
| } |
| |
| ret = exynos_usbdrd_clk_prepare(phy_drd); |
| if (ret) { |
| dev_err(dev, "%s: Failed to prepare clocks\n", __func__); |
| return ret; |
| } |
| |
| reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "samsung,pmu-syscon"); |
| if (IS_ERR(reg_pmu)) { |
| dev_err(dev, "Failed to lookup PMU regmap\n"); |
| goto err; |
| } |
| |
| ret = of_property_read_u32(dev->of_node, "pmu_offset", &pmu_offset); |
| if (ret < 0) { |
| dev_err(dev, "couldn't read pmu_offset on %s node, error = %d\n", |
| dev->of_node->name, ret); |
| goto err; |
| } |
| |
| ret = of_property_read_u32(dev->of_node, "pmu_mask", &pmu_mask); |
| if (ret < 0) { |
| dev_err(dev, "couldn't read pmu_mask on %s node, error = %d\n", |
| dev->of_node->name, ret); |
| goto err; |
| } |
| |
| dev_vdbg(dev, "Creating usbdrd_phy phy\n"); |
| phy_drd->phy_port = of_get_named_gpio(dev->of_node, |
| "phy,gpio_phy_port", 0); |
| if (gpio_is_valid(phy_drd->phy_port)) { |
| dev_err(dev, "PHY CON Selection OK\n"); |
| |
| ret = gpio_request(phy_drd->phy_port, "PHY_CON"); |
| if (ret) |
| dev_err(dev, "fail to request gpio %s:%d\n", "PHY_CON", ret); |
| else |
| gpio_direction_input(phy_drd->phy_port); |
| } else { |
| dev_err(dev, "non-DT: PHY CON Selection\n"); |
| } |
| |
| if (!of_property_read_u32(dev->of_node, "has_combo_phy", &ret)) { |
| if (ret) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| phy_drd->reg_phy2 = devm_ioremap_resource(dev, res); |
| if (IS_ERR(phy_drd->reg_phy2)) |
| return PTR_ERR(phy_drd->reg_phy2); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 2); |
| phy_drd->reg_phy3 = devm_ioremap_resource(dev, res); |
| if (IS_ERR(phy_drd->reg_phy3)) |
| return PTR_ERR(phy_drd->reg_phy3); |
| |
| exynos_usbdrd_get_sub_phyinfo(phy_drd); |
| } else { |
| dev_err(dev, "It has not the other phy\n"); |
| } |
| } |
| #if IS_ENABLED(CONFIG_EXYNOS_OTP) |
| exynos_usbdrd_phy_get_otp_info(phy_drd); |
| #endif |
| |
| for (i = 0; i < EXYNOS_DRDPHYS_NUM; i++) { |
| struct phy *phy = devm_phy_create(dev, NULL, |
| &exynos_usbdrd_phy_ops); |
| if (IS_ERR(phy)) { |
| dev_err(dev, "Failed to create usbdrd_phy phy\n"); |
| goto err; |
| } |
| |
| phy_drd->phys[i].phy = phy; |
| phy_drd->phys[i].index = i; |
| phy_drd->phys[i].reg_pmu = reg_pmu; |
| phy_drd->phys[i].pmu_offset = pmu_offset; |
| phy_drd->phys[i].pmu_mask = pmu_mask; |
| phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i]; |
| phy_set_drvdata(phy, &phy_drd->phys[i]); |
| } |
| #if IS_ENABLED(CONFIG_PHY_EXYNOS_DEBUGFS) |
| ret = exynos_usbdrd_debugfs_init(phy_drd); |
| if (ret) { |
| dev_err(dev, "Failed to initialize debugfs\n"); |
| goto err; |
| } |
| #endif |
| |
| inst = &phy_drd->phys[0]; |
| inst->phy_cfg->phy_isol(inst, 0, inst->pmu_mask); |
| ret = exynos_rate_to_clk(phy_drd); |
| if (ret) { |
| dev_err(phy_drd->dev, "%s: Not supported ref clock\n", |
| __func__); |
| goto err; |
| } |
| inst->phy_cfg->phy_isol(inst, 1, inst->pmu_mask); |
| |
| ret = exynos_usbdrd_get_phyinfo(phy_drd); |
| if (ret) |
| goto err; |
| |
| /* |
| * Both has_other_phy and has_combo_phy can't be enabled at the same time. |
| * It's alternative. |
| */ |
| if (!of_property_read_u32(dev->of_node, "has_other_phy", &ret)) { |
| if (ret) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| phy_drd->reg_phy2 = devm_ioremap_resource(dev, res); |
| if (IS_ERR(phy_drd->reg_phy2)) |
| return PTR_ERR(phy_drd->reg_phy2); |
| |
| phy_drd->usbphy_info.regs_base_2nd = phy_drd->reg_phy2; |
| phy_drd->usbphy_info.ss_tune_param = |
| phy_drd->usbphy_sub_info.tune_param; |
| } else { |
| dev_err(dev, "It has not the other phy\n"); |
| } |
| } |
| |
| phy_provider = devm_of_phy_provider_register(dev, |
| exynos_usbdrd_phy_xlate); |
| if (IS_ERR(phy_provider)) { |
| dev_err(phy_drd->dev, "Failed to register phy provider\n"); |
| goto err; |
| } |
| |
| pr_info("%s: ---\n", __func__); |
| return 0; |
| |
| err: |
| exynos_usbdrd_clk_unprepare(phy_drd); |
| |
| return ret; |
| } |
| |
| #define EXYNOS_USBDRD_PHY_PM_OPS NULL |
| |
| static struct platform_driver phy_exynos_usbdrd = { |
| .probe = exynos_usbdrd_phy_probe, |
| .driver = { |
| .of_match_table = exynos_usbdrd_phy_of_match, |
| .name = "phy_exynos_usbdrd", |
| .pm = EXYNOS_USBDRD_PHY_PM_OPS, |
| } |
| }; |
| |
| module_platform_driver(phy_exynos_usbdrd); |
| MODULE_DESCRIPTION("Samsung EXYNOS SoCs USB DRD controller PHY driver"); |
| MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:phy_exynos_usbdrd"); |