drivers/phy/broadcom/phy-brcm-sata.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * Broadcom SATA3 AHCI Controller PHY Driver
  *
  * Copyright (C) 2016 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2, or (at your option)
  * any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>

 #define SATA_PCB_BANK_OFFSET				0x23c
 #define SATA_PCB_REG_OFFSET(ofs)			((ofs) * 4)

 #define MAX_PORTS					2

 /* Register offset between PHYs in PCB space */
 #define SATA_PCB_REG_28NM_SPACE_SIZE			0x1000

 /* The older SATA PHY registers duplicated per port registers within the map,
  * rather than having a separate map per port.
  */
 #define SATA_PCB_REG_40NM_SPACE_SIZE			0x10

 /* Register offset between PHYs in PHY control space */
 #define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE		0x8

 enum brcm_sata_phy_version {
 	BRCM_SATA_PHY_STB_28NM,
 	BRCM_SATA_PHY_STB_40NM,
 	BRCM_SATA_PHY_IPROC_NS2,
 	BRCM_SATA_PHY_IPROC_NSP,
 	BRCM_SATA_PHY_IPROC_SR,
 };

 struct brcm_sata_port {
 	int portnum;
 	struct phy *phy;
 	struct brcm_sata_phy *phy_priv;
 	bool ssc_en;
 };

 struct brcm_sata_phy {
 	struct device *dev;
 	void __iomem *phy_base;
 	void __iomem *ctrl_base;
 	enum brcm_sata_phy_version version;

 	struct brcm_sata_port phys[MAX_PORTS];
 };

 enum sata_phy_regs {
 	BLOCK0_REG_BANK				= 0x000,
 	BLOCK0_XGXSSTATUS			= 0x81,
 	BLOCK0_XGXSSTATUS_PLL_LOCK		= BIT(12),
 	BLOCK0_SPARE				= 0x8d,
 	BLOCK0_SPARE_OOB_CLK_SEL_MASK		= 0x3,
 	BLOCK0_SPARE_OOB_CLK_SEL_REFBY2		= 0x1,

 	PLL_REG_BANK_0				= 0x050,
 	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
 	PLLCONTROL_0_FREQ_DET_RESTART		= BIT(13),
 	PLLCONTROL_0_FREQ_MONITOR		= BIT(12),
 	PLLCONTROL_0_SEQ_START			= BIT(15),
 	PLL_CAP_CONTROL				= 0x85,
 	PLL_ACTRL2				= 0x8b,
 	PLL_ACTRL2_SELDIV_MASK			= 0x1f,
 	PLL_ACTRL2_SELDIV_SHIFT			= 9,
 	PLL_ACTRL6				= 0x86,

 	PLL1_REG_BANK				= 0x060,
 	PLL1_ACTRL2				= 0x82,
 	PLL1_ACTRL3				= 0x83,
 	PLL1_ACTRL4				= 0x84,

 	TX_REG_BANK				= 0x070,
 	TX_ACTRL0				= 0x80,
 	TX_ACTRL0_TXPOL_FLIP			= BIT(6),

 	OOB_REG_BANK				= 0x150,
 	OOB1_REG_BANK				= 0x160,
 	OOB_CTRL1				= 0x80,
 	OOB_CTRL1_BURST_MAX_MASK		= 0xf,
 	OOB_CTRL1_BURST_MAX_SHIFT		= 12,
 	OOB_CTRL1_BURST_MIN_MASK		= 0xf,
 	OOB_CTRL1_BURST_MIN_SHIFT		= 8,
 	OOB_CTRL1_WAKE_IDLE_MAX_MASK		= 0xf,
 	OOB_CTRL1_WAKE_IDLE_MAX_SHIFT		= 4,
 	OOB_CTRL1_WAKE_IDLE_MIN_MASK		= 0xf,
 	OOB_CTRL1_WAKE_IDLE_MIN_SHIFT		= 0,
 	OOB_CTRL2				= 0x81,
 	OOB_CTRL2_SEL_ENA_SHIFT			= 15,
 	OOB_CTRL2_SEL_ENA_RC_SHIFT		= 14,
 	OOB_CTRL2_RESET_IDLE_MAX_MASK		= 0x3f,
 	OOB_CTRL2_RESET_IDLE_MAX_SHIFT		= 8,
 	OOB_CTRL2_BURST_CNT_MASK		= 0x3,
 	OOB_CTRL2_BURST_CNT_SHIFT		= 6,
 	OOB_CTRL2_RESET_IDLE_MIN_MASK		= 0x3f,
 	OOB_CTRL2_RESET_IDLE_MIN_SHIFT		= 0,

 	TXPMD_REG_BANK				= 0x1a0,
 	TXPMD_CONTROL1				= 0x81,
 	TXPMD_CONTROL1_TX_SSC_EN_FRC		= BIT(0),
 	TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL	= BIT(1),
 	TXPMD_TX_FREQ_CTRL_CONTROL1		= 0x82,
 	TXPMD_TX_FREQ_CTRL_CONTROL2		= 0x83,
 	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK	= 0x3ff,
 	TXPMD_TX_FREQ_CTRL_CONTROL3		= 0x84,
 	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK	= 0x3ff,
 };

 enum sata_phy_ctrl_regs {
 	PHY_CTRL_1				= 0x0,
 	PHY_CTRL_1_RESET			= BIT(0),
 };

 static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
 {
 	struct brcm_sata_phy *priv = port->phy_priv;
 	u32 size = 0;

 	switch (priv->version) {
 	case BRCM_SATA_PHY_STB_28NM:
 	case BRCM_SATA_PHY_IPROC_NS2:
 		size = SATA_PCB_REG_28NM_SPACE_SIZE;
 		break;
 	case BRCM_SATA_PHY_STB_40NM:
 		size = SATA_PCB_REG_40NM_SPACE_SIZE;
 		break;
 	default:
 		dev_err(priv->dev, "invalid phy version\n");
 		break;
 	}

 	return priv->phy_base + (port->portnum * size);
 }

 static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
 {
 	struct brcm_sata_phy *priv = port->phy_priv;
 	u32 size = 0;

 	switch (priv->version) {
 	case BRCM_SATA_PHY_IPROC_NS2:
 		size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE;
 		break;
 	default:
 		dev_err(priv->dev, "invalid phy version\n");
 		break;
 	}

 	return priv->ctrl_base + (port->portnum * size);
 }

 static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank,
 			     u32 ofs, u32 msk, u32 value)
 {
 	u32 tmp;

 	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
 	tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
 	tmp = (tmp & msk) | value;
 	writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs));
 }

 static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
 {
 	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
 	return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
 }

 /* These defaults were characterized by H/W group */
 #define STB_FMIN_VAL_DEFAULT	0x3df
 #define STB_FMAX_VAL_DEFAULT	0x3df
 #define STB_FMAX_VAL_SSC	0x83

 static int brcm_stb_sata_init(struct brcm_sata_port *port)
 {
 	void __iomem *base = brcm_sata_pcb_base(port);
 	struct brcm_sata_phy *priv = port->phy_priv;
 	u32 tmp;

 	/* override the TX spread spectrum setting */
 	tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
 	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);

 	/* set fixed min freq */
 	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
 			 ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
 			 STB_FMIN_VAL_DEFAULT);

 	/* set fixed max freq depending on SSC config */
 	if (port->ssc_en) {
 		dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum);
 		tmp = STB_FMAX_VAL_SSC;
 	} else {
 		tmp = STB_FMAX_VAL_DEFAULT;
 	}

 	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
 			  ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);

 	return 0;
 }

 /* NS2 SATA PLL1 defaults were characterized by H/W group */
 #define NS2_PLL1_ACTRL2_MAGIC	0x1df8
 #define NS2_PLL1_ACTRL3_MAGIC	0x2b00
 #define NS2_PLL1_ACTRL4_MAGIC	0x8824

 static int brcm_ns2_sata_init(struct brcm_sata_port *port)
 {
 	int try;
 	unsigned int val;
 	void __iomem *base = brcm_sata_pcb_base(port);
 	void __iomem *ctrl_base = brcm_sata_ctrl_base(port);
 	struct device *dev = port->phy_priv->dev;

 	/* Configure OOB control */
 	val = 0x0;
 	val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT);
 	val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT);
 	val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
 	val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
 	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
 	val = 0x0;
 	val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
 	val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT);
 	val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
 	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);

 	/* Configure PHY PLL register bank 1 */
 	val = NS2_PLL1_ACTRL2_MAGIC;
 	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
 	val = NS2_PLL1_ACTRL3_MAGIC;
 	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
 	val = NS2_PLL1_ACTRL4_MAGIC;
 	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);

 	/* Configure PHY BLOCK0 register bank */
 	/* Set oob_clk_sel to refclk/2 */
 	brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE,
 			 ~BLOCK0_SPARE_OOB_CLK_SEL_MASK,
 			 BLOCK0_SPARE_OOB_CLK_SEL_REFBY2);

 	/* Strobe PHY reset using PHY control register */
 	writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1);
 	mdelay(1);
 	writel(0x0, ctrl_base + PHY_CTRL_1);
 	mdelay(1);

 	/* Wait for PHY PLL lock by polling pll_lock bit */
 	try = 50;
 	while (try) {
 		val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
 					BLOCK0_XGXSSTATUS);
 		if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
 			break;
 		msleep(20);
 		try--;
 	}
 	if (!try) {
 		/* PLL did not lock; give up */
 		dev_err(dev, "port%d PLL did not lock\n", port->portnum);
 		return -ETIMEDOUT;
 	}

 	dev_dbg(dev, "port%d initialized\n", port->portnum);

 	return 0;
 }

 static int brcm_nsp_sata_init(struct brcm_sata_port *port)
 {
 	struct brcm_sata_phy *priv = port->phy_priv;
 	struct device *dev = port->phy_priv->dev;
 	void __iomem *base = priv->phy_base;
 	unsigned int oob_bank;
 	unsigned int val, try;

 	/* Configure OOB control */
 	if (port->portnum == 0)
 		oob_bank = OOB_REG_BANK;
 	else if (port->portnum == 1)
 		oob_bank = OOB1_REG_BANK;
 	else
 		return -EINVAL;

 	val = 0x0;
 	val |= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT);
 	val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT);
 	val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
 	val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
 	brcm_sata_phy_wr(base, oob_bank, OOB_CTRL1, 0x0, val);

 	val = 0x0;
 	val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
 	val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT);
 	val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
 	brcm_sata_phy_wr(base, oob_bank, OOB_CTRL2, 0x0, val);


 	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL2,
 		~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT),
 		0x0c << PLL_ACTRL2_SELDIV_SHIFT);

 	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CONTROL,
 						0xff0, 0x4f0);

 	val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR;
 	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
 								~val, val);
 	val = PLLCONTROL_0_SEQ_START;
 	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
 								~val, 0);
 	mdelay(10);
 	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
 								~val, val);

 	/* Wait for pll_seq_done bit */
 	try = 50;
 	while (--try) {
 		val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
 					BLOCK0_XGXSSTATUS);
 		if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
 			break;
 		msleep(20);
 	}
 	if (!try) {
 		/* PLL did not lock; give up */
 		dev_err(dev, "port%d PLL did not lock\n", port->portnum);
 		return -ETIMEDOUT;
 	}

 	dev_dbg(dev, "port%d initialized\n", port->portnum);

 	return 0;
 }

 /* SR PHY PLL0 registers */
 #define SR_PLL0_ACTRL6_MAGIC			0xa

 /* SR PHY PLL1 registers */
 #define SR_PLL1_ACTRL2_MAGIC			0x32
 #define SR_PLL1_ACTRL3_MAGIC			0x2
 #define SR_PLL1_ACTRL4_MAGIC			0x3e8

 static int brcm_sr_sata_init(struct brcm_sata_port *port)
 {
 	struct brcm_sata_phy *priv = port->phy_priv;
 	struct device *dev = port->phy_priv->dev;
 	void __iomem *base = priv->phy_base;
 	unsigned int val, try;

 	/* Configure PHY PLL register bank 1 */
 	val = SR_PLL1_ACTRL2_MAGIC;
 	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
 	val = SR_PLL1_ACTRL3_MAGIC;
 	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
 	val = SR_PLL1_ACTRL4_MAGIC;
 	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);

 	/* Configure PHY PLL register bank 0 */
 	val = SR_PLL0_ACTRL6_MAGIC;
 	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val);

 	/* Wait for PHY PLL lock by polling pll_lock bit */
 	try = 50;
 	do {
 		val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
 					BLOCK0_XGXSSTATUS);
 		if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
 			break;
 		msleep(20);
 		try--;
 	} while (try);

 	if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) {
 		/* PLL did not lock; give up */
 		dev_err(dev, "port%d PLL did not lock\n", port->portnum);
 		return -ETIMEDOUT;
 	}

 	/* Invert Tx polarity */
 	brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL0,
 			 ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP);

 	/* Configure OOB control to handle 100MHz reference clock */
 	val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) |
 		(0x4 << OOB_CTRL1_BURST_MIN_SHIFT) |
 		(0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) |
 		(0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT));
 	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
 	val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) |
 		(0x2 << OOB_CTRL2_BURST_CNT_SHIFT) |
 		(0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT));
 	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);

 	return 0;
 }

 static int brcm_sata_phy_init(struct phy *phy)
 {
 	int rc;
 	struct brcm_sata_port *port = phy_get_drvdata(phy);

 	switch (port->phy_priv->version) {
 	case BRCM_SATA_PHY_STB_28NM:
 	case BRCM_SATA_PHY_STB_40NM:
 		rc = brcm_stb_sata_init(port);
 		break;
 	case BRCM_SATA_PHY_IPROC_NS2:
 		rc = brcm_ns2_sata_init(port);
 		break;
 	case BRCM_SATA_PHY_IPROC_NSP:
 		rc = brcm_nsp_sata_init(port);
 		break;
 	case BRCM_SATA_PHY_IPROC_SR:
 		rc = brcm_sr_sata_init(port);
 		break;
 	default:
 		rc = -ENODEV;
 	}

 	return rc;
 }

 static const struct phy_ops phy_ops = {
 	.init		= brcm_sata_phy_init,
 	.owner		= THIS_MODULE,
 };

 static const struct of_device_id brcm_sata_phy_of_match[] = {
 	{ .compatible	= "brcm,bcm7445-sata-phy",
 	  .data = (void *)BRCM_SATA_PHY_STB_28NM },
 	{ .compatible	= "brcm,bcm7425-sata-phy",
 	  .data = (void *)BRCM_SATA_PHY_STB_40NM },
 	{ .compatible	= "brcm,iproc-ns2-sata-phy",
 	  .data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
 	{ .compatible = "brcm,iproc-nsp-sata-phy",
 	  .data = (void *)BRCM_SATA_PHY_IPROC_NSP },
 	{ .compatible	= "brcm,iproc-sr-sata-phy",
 	  .data = (void *)BRCM_SATA_PHY_IPROC_SR },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);

 static int brcm_sata_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *dn = dev->of_node, *child;
 	const struct of_device_id *of_id;
 	struct brcm_sata_phy *priv;
 	struct resource *res;
 	struct phy_provider *provider;
 	int ret, count = 0;

 	if (of_get_child_count(dn) == 0)
 		return -ENODEV;

 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 	dev_set_drvdata(dev, priv);
 	priv->dev = dev;

 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
 	priv->phy_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(priv->phy_base))
 		return PTR_ERR(priv->phy_base);

 	of_id = of_match_node(brcm_sata_phy_of_match, dn);
 	if (of_id)
 		priv->version = (enum brcm_sata_phy_version)of_id->data;
 	else
 		priv->version = BRCM_SATA_PHY_STB_28NM;

 	if (priv->version == BRCM_SATA_PHY_IPROC_NS2) {
 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 						   "phy-ctrl");
 		priv->ctrl_base = devm_ioremap_resource(dev, res);
 		if (IS_ERR(priv->ctrl_base))
 			return PTR_ERR(priv->ctrl_base);
 	}

 	for_each_available_child_of_node(dn, child) {
 		unsigned int id;
 		struct brcm_sata_port *port;

 		if (of_property_read_u32(child, "reg", &id)) {
 			dev_err(dev, "missing reg property in node %s\n",
 					child->name);
 			ret = -EINVAL;
 			goto put_child;
 		}

 		if (id >= MAX_PORTS) {
 			dev_err(dev, "invalid reg: %u\n", id);
 			ret = -EINVAL;
 			goto put_child;
 		}
 		if (priv->phys[id].phy) {
 			dev_err(dev, "already registered port %u\n", id);
 			ret = -EINVAL;
 			goto put_child;
 		}

 		port = &priv->phys[id];
 		port->portnum = id;
 		port->phy_priv = priv;
 		port->phy = devm_phy_create(dev, child, &phy_ops);
 		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
 		if (IS_ERR(port->phy)) {
 			dev_err(dev, "failed to create PHY\n");
 			ret = PTR_ERR(port->phy);
 			goto put_child;
 		}

 		phy_set_drvdata(port->phy, port);
 		count++;
 	}

 	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (IS_ERR(provider)) {
 		dev_err(dev, "could not register PHY provider\n");
 		return PTR_ERR(provider);
 	}

 	dev_info(dev, "registered %d port(s)\n", count);

 	return 0;
 put_child:
 	of_node_put(child);
 	return ret;
 }

 static struct platform_driver brcm_sata_phy_driver = {
 	.probe	= brcm_sata_phy_probe,
 	.driver	= {
 		.of_match_table	= brcm_sata_phy_of_match,
 		.name		= "brcm-sata-phy",
 	}
 };
 module_platform_driver(brcm_sata_phy_driver);

 MODULE_DESCRIPTION("Broadcom SATA PHY driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Marc Carino");
 MODULE_AUTHOR("Brian Norris");
 MODULE_ALIAS("platform:phy-brcm-sata");
	/*
	* Broadcom SATA3 AHCI Controller PHY Driver
	*
	* Copyright (C) 2016 Broadcom
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2, or (at your option)
	* any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/delay.h>
	#include <linux/device.h>
	#include <linux/init.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/phy/phy.h>
	#include <linux/platform_device.h>

	#define SATA_PCB_BANK_OFFSET 0x23c
	#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4)

	#define MAX_PORTS 2

	/* Register offset between PHYs in PCB space */
	#define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000

	/* The older SATA PHY registers duplicated per port registers within the map,
	* rather than having a separate map per port.
	*/
	#define SATA_PCB_REG_40NM_SPACE_SIZE 0x10

	/* Register offset between PHYs in PHY control space */
	#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8

	enum brcm_sata_phy_version {
	BRCM_SATA_PHY_STB_28NM,
	BRCM_SATA_PHY_STB_40NM,
	BRCM_SATA_PHY_IPROC_NS2,
	BRCM_SATA_PHY_IPROC_NSP,
	BRCM_SATA_PHY_IPROC_SR,
	};

	struct brcm_sata_port {
	int portnum;
	struct phy *phy;
	struct brcm_sata_phy *phy_priv;
	bool ssc_en;
	};

	struct brcm_sata_phy {
	struct device *dev;
	void __iomem *phy_base;
	void __iomem *ctrl_base;
	enum brcm_sata_phy_version version;

	struct brcm_sata_port phys[MAX_PORTS];
	};

	enum sata_phy_regs {
	BLOCK0_REG_BANK = 0x000,
	BLOCK0_XGXSSTATUS = 0x81,
	BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12),
	BLOCK0_SPARE = 0x8d,
	BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3,
	BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1,

	PLL_REG_BANK_0 = 0x050,
	PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
	PLLCONTROL_0_FREQ_DET_RESTART = BIT(13),
	PLLCONTROL_0_FREQ_MONITOR = BIT(12),
	PLLCONTROL_0_SEQ_START = BIT(15),
	PLL_CAP_CONTROL = 0x85,
	PLL_ACTRL2 = 0x8b,
	PLL_ACTRL2_SELDIV_MASK = 0x1f,
	PLL_ACTRL2_SELDIV_SHIFT = 9,
	PLL_ACTRL6 = 0x86,

	PLL1_REG_BANK = 0x060,
	PLL1_ACTRL2 = 0x82,
	PLL1_ACTRL3 = 0x83,
	PLL1_ACTRL4 = 0x84,

	TX_REG_BANK = 0x070,
	TX_ACTRL0 = 0x80,
	TX_ACTRL0_TXPOL_FLIP = BIT(6),

	OOB_REG_BANK = 0x150,
	OOB1_REG_BANK = 0x160,
	OOB_CTRL1 = 0x80,
	OOB_CTRL1_BURST_MAX_MASK = 0xf,
	OOB_CTRL1_BURST_MAX_SHIFT = 12,
	OOB_CTRL1_BURST_MIN_MASK = 0xf,
	OOB_CTRL1_BURST_MIN_SHIFT = 8,
	OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf,
	OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4,
	OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf,
	OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0,
	OOB_CTRL2 = 0x81,
	OOB_CTRL2_SEL_ENA_SHIFT = 15,
	OOB_CTRL2_SEL_ENA_RC_SHIFT = 14,
	OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f,
	OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8,
	OOB_CTRL2_BURST_CNT_MASK = 0x3,
	OOB_CTRL2_BURST_CNT_SHIFT = 6,
	OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f,
	OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0,

	TXPMD_REG_BANK = 0x1a0,
	TXPMD_CONTROL1 = 0x81,
	TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0),
	TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1),
	TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82,
	TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83,
	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff,
	TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84,
	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
	};

	enum sata_phy_ctrl_regs {
	PHY_CTRL_1 = 0x0,
	PHY_CTRL_1_RESET = BIT(0),
	};

	static inline void __iomem brcm_sata_pcb_base(struct brcm_sata_port port)
	{
	struct brcm_sata_phy *priv = port->phy_priv;
	u32 size = 0;

	switch (priv->version) {
	case BRCM_SATA_PHY_STB_28NM:
	case BRCM_SATA_PHY_IPROC_NS2:
	size = SATA_PCB_REG_28NM_SPACE_SIZE;
	break;
	case BRCM_SATA_PHY_STB_40NM:
	size = SATA_PCB_REG_40NM_SPACE_SIZE;
	break;
	default:
	dev_err(priv->dev, "invalid phy version\n");
	break;
	}

	return priv->phy_base + (port->portnum * size);
	}

	static inline void __iomem brcm_sata_ctrl_base(struct brcm_sata_port port)
	{
	struct brcm_sata_phy *priv = port->phy_priv;
	u32 size = 0;

	switch (priv->version) {
	case BRCM_SATA_PHY_IPROC_NS2:
	size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE;
	break;
	default:
	dev_err(priv->dev, "invalid phy version\n");
	break;
	}

	return priv->ctrl_base + (port->portnum * size);
	}

	static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank,
	u32 ofs, u32 msk, u32 value)
	{
	u32 tmp;

	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
	tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
	tmp = (tmp & msk) \| value;
	writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs));
	}

	static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
	{
	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
	return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
	}

	/* These defaults were characterized by H/W group */
	#define STB_FMIN_VAL_DEFAULT 0x3df
	#define STB_FMAX_VAL_DEFAULT 0x3df
	#define STB_FMAX_VAL_SSC 0x83

	static int brcm_stb_sata_init(struct brcm_sata_port *port)
	{
	void __iomem *base = brcm_sata_pcb_base(port);
	struct brcm_sata_phy *priv = port->phy_priv;
	u32 tmp;

	/* override the TX spread spectrum setting */
	tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL \| TXPMD_CONTROL1_TX_SSC_EN_FRC;
	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);

	/* set fixed min freq */
	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
	~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
	STB_FMIN_VAL_DEFAULT);

	/* set fixed max freq depending on SSC config */
	if (port->ssc_en) {
	dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum);
	tmp = STB_FMAX_VAL_SSC;
	} else {
	tmp = STB_FMAX_VAL_DEFAULT;
	}

	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
	~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);

	return 0;
	}

	/* NS2 SATA PLL1 defaults were characterized by H/W group */
	#define NS2_PLL1_ACTRL2_MAGIC 0x1df8
	#define NS2_PLL1_ACTRL3_MAGIC 0x2b00
	#define NS2_PLL1_ACTRL4_MAGIC 0x8824

	static int brcm_ns2_sata_init(struct brcm_sata_port *port)
	{
	int try;
	unsigned int val;
	void __iomem *base = brcm_sata_pcb_base(port);
	void __iomem *ctrl_base = brcm_sata_ctrl_base(port);
	struct device *dev = port->phy_priv->dev;

	/* Configure OOB control */
	val = 0x0;
	val \|= (0xc << OOB_CTRL1_BURST_MAX_SHIFT);
	val \|= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT);
	val \|= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
	val \|= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
	val = 0x0;
	val \|= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
	val \|= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT);
	val \|= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);

	/* Configure PHY PLL register bank 1 */
	val = NS2_PLL1_ACTRL2_MAGIC;
	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
	val = NS2_PLL1_ACTRL3_MAGIC;
	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
	val = NS2_PLL1_ACTRL4_MAGIC;
	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);

	/* Configure PHY BLOCK0 register bank */
	/* Set oob_clk_sel to refclk/2 */
	brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE,
	~BLOCK0_SPARE_OOB_CLK_SEL_MASK,
	BLOCK0_SPARE_OOB_CLK_SEL_REFBY2);

	/* Strobe PHY reset using PHY control register */
	writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1);
	mdelay(1);
	writel(0x0, ctrl_base + PHY_CTRL_1);
	mdelay(1);

	/* Wait for PHY PLL lock by polling pll_lock bit */
	try = 50;
	while (try) {
	val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
	BLOCK0_XGXSSTATUS);
	if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
	break;
	msleep(20);
	try--;
	}
	if (!try) {
	/* PLL did not lock; give up */
	dev_err(dev, "port%d PLL did not lock\n", port->portnum);
	return -ETIMEDOUT;
	}

	dev_dbg(dev, "port%d initialized\n", port->portnum);

	return 0;
	}

	static int brcm_nsp_sata_init(struct brcm_sata_port *port)
	{
	struct brcm_sata_phy *priv = port->phy_priv;
	struct device *dev = port->phy_priv->dev;
	void __iomem *base = priv->phy_base;
	unsigned int oob_bank;
	unsigned int val, try;

	/* Configure OOB control */
	if (port->portnum == 0)
	oob_bank = OOB_REG_BANK;
	else if (port->portnum == 1)
	oob_bank = OOB1_REG_BANK;
	else
	return -EINVAL;

	val = 0x0;
	val \|= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT);
	val \|= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT);
	val \|= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
	val \|= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
	brcm_sata_phy_wr(base, oob_bank, OOB_CTRL1, 0x0, val);

	val = 0x0;
	val \|= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
	val \|= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT);
	val \|= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
	brcm_sata_phy_wr(base, oob_bank, OOB_CTRL2, 0x0, val);


	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL2,
	~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT),
	0x0c << PLL_ACTRL2_SELDIV_SHIFT);

	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CONTROL,
	0xff0, 0x4f0);

	val = PLLCONTROL_0_FREQ_DET_RESTART \| PLLCONTROL_0_FREQ_MONITOR;
	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
	~val, val);
	val = PLLCONTROL_0_SEQ_START;
	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
	~val, 0);
	mdelay(10);
	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
	~val, val);

	/* Wait for pll_seq_done bit */
	try = 50;
	while (--try) {
	val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
	BLOCK0_XGXSSTATUS);
	if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
	break;
	msleep(20);
	}
	if (!try) {
	/* PLL did not lock; give up */
	dev_err(dev, "port%d PLL did not lock\n", port->portnum);
	return -ETIMEDOUT;
	}

	dev_dbg(dev, "port%d initialized\n", port->portnum);

	return 0;
	}

	/* SR PHY PLL0 registers */
	#define SR_PLL0_ACTRL6_MAGIC 0xa

	/* SR PHY PLL1 registers */
	#define SR_PLL1_ACTRL2_MAGIC 0x32
	#define SR_PLL1_ACTRL3_MAGIC 0x2
	#define SR_PLL1_ACTRL4_MAGIC 0x3e8

	static int brcm_sr_sata_init(struct brcm_sata_port *port)
	{
	struct brcm_sata_phy *priv = port->phy_priv;
	struct device *dev = port->phy_priv->dev;
	void __iomem *base = priv->phy_base;
	unsigned int val, try;

	/* Configure PHY PLL register bank 1 */
	val = SR_PLL1_ACTRL2_MAGIC;
	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
	val = SR_PLL1_ACTRL3_MAGIC;
	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
	val = SR_PLL1_ACTRL4_MAGIC;
	brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);

	/* Configure PHY PLL register bank 0 */
	val = SR_PLL0_ACTRL6_MAGIC;
	brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val);

	/* Wait for PHY PLL lock by polling pll_lock bit */
	try = 50;
	do {
	val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
	BLOCK0_XGXSSTATUS);
	if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
	break;
	msleep(20);
	try--;
	} while (try);

	if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) {
	/* PLL did not lock; give up */
	dev_err(dev, "port%d PLL did not lock\n", port->portnum);
	return -ETIMEDOUT;
	}

	/* Invert Tx polarity */
	brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL0,
	~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP);

	/* Configure OOB control to handle 100MHz reference clock */
	val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) \|
	(0x4 << OOB_CTRL1_BURST_MIN_SHIFT) \|
	(0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) \|
	(0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT));
	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
	val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) \|
	(0x2 << OOB_CTRL2_BURST_CNT_SHIFT) \|
	(0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT));
	brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);

	return 0;
	}

	static int brcm_sata_phy_init(struct phy *phy)
	{
	int rc;
	struct brcm_sata_port *port = phy_get_drvdata(phy);

	switch (port->phy_priv->version) {
	case BRCM_SATA_PHY_STB_28NM:
	case BRCM_SATA_PHY_STB_40NM:
	rc = brcm_stb_sata_init(port);
	break;
	case BRCM_SATA_PHY_IPROC_NS2:
	rc = brcm_ns2_sata_init(port);
	break;
	case BRCM_SATA_PHY_IPROC_NSP:
	rc = brcm_nsp_sata_init(port);
	break;
	case BRCM_SATA_PHY_IPROC_SR:
	rc = brcm_sr_sata_init(port);
	break;
	default:
	rc = -ENODEV;
	}

	return rc;
	}

	static const struct phy_ops phy_ops = {
	.init = brcm_sata_phy_init,
	.owner = THIS_MODULE,
	};

	static const struct of_device_id brcm_sata_phy_of_match[] = {
	{ .compatible = "brcm,bcm7445-sata-phy",
	.data = (void *)BRCM_SATA_PHY_STB_28NM },
	{ .compatible = "brcm,bcm7425-sata-phy",
	.data = (void *)BRCM_SATA_PHY_STB_40NM },
	{ .compatible = "brcm,iproc-ns2-sata-phy",
	.data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
	{ .compatible = "brcm,iproc-nsp-sata-phy",
	.data = (void *)BRCM_SATA_PHY_IPROC_NSP },
	{ .compatible = "brcm,iproc-sr-sata-phy",
	.data = (void *)BRCM_SATA_PHY_IPROC_SR },
	{},
	};
	MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);

	static int brcm_sata_phy_probe(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct device_node dn = dev->of_node, child;
	const struct of_device_id *of_id;
	struct brcm_sata_phy *priv;
	struct resource *res;
	struct phy_provider *provider;
	int ret, count = 0;

	if (of_get_child_count(dn) == 0)
	return -ENODEV;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;
	dev_set_drvdata(dev, priv);
	priv->dev = dev;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
	priv->phy_base = devm_ioremap_resource(dev, res);
	if (IS_ERR(priv->phy_base))
	return PTR_ERR(priv->phy_base);

	of_id = of_match_node(brcm_sata_phy_of_match, dn);
	if (of_id)
	priv->version = (enum brcm_sata_phy_version)of_id->data;
	else
	priv->version = BRCM_SATA_PHY_STB_28NM;

	if (priv->version == BRCM_SATA_PHY_IPROC_NS2) {
	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
	"phy-ctrl");
	priv->ctrl_base = devm_ioremap_resource(dev, res);
	if (IS_ERR(priv->ctrl_base))
	return PTR_ERR(priv->ctrl_base);
	}

	for_each_available_child_of_node(dn, child) {
	unsigned int id;
	struct brcm_sata_port *port;

	if (of_property_read_u32(child, "reg", &id)) {
	dev_err(dev, "missing reg property in node %s\n",
	child->name);
	ret = -EINVAL;
	goto put_child;
	}

	if (id >= MAX_PORTS) {
	dev_err(dev, "invalid reg: %u\n", id);
	ret = -EINVAL;
	goto put_child;
	}
	if (priv->phys[id].phy) {
	dev_err(dev, "already registered port %u\n", id);
	ret = -EINVAL;
	goto put_child;
	}

	port = &priv->phys[id];
	port->portnum = id;
	port->phy_priv = priv;
	port->phy = devm_phy_create(dev, child, &phy_ops);
	port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
	if (IS_ERR(port->phy)) {
	dev_err(dev, "failed to create PHY\n");
	ret = PTR_ERR(port->phy);
	goto put_child;
	}

	phy_set_drvdata(port->phy, port);
	count++;
	}

	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
	if (IS_ERR(provider)) {
	dev_err(dev, "could not register PHY provider\n");
	return PTR_ERR(provider);
	}

	dev_info(dev, "registered %d port(s)\n", count);

	return 0;
	put_child:
	of_node_put(child);
	return ret;
	}

	static struct platform_driver brcm_sata_phy_driver = {
	.probe = brcm_sata_phy_probe,
	.driver = {
	.of_match_table = brcm_sata_phy_of_match,
	.name = "brcm-sata-phy",
	}
	};
	module_platform_driver(brcm_sata_phy_driver);

	MODULE_DESCRIPTION("Broadcom SATA PHY driver");
	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Marc Carino");
	MODULE_AUTHOR("Brian Norris");
	MODULE_ALIAS("platform:phy-brcm-sata");