| /* |
| * File: msi.c |
| * Purpose: PCI Message Signaled Interrupt (MSI) |
| * |
| * Copyright (C) 2003-2004 Intel |
| * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) |
| * Copyright (C) 2016 Christoph Hellwig. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/mm.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/export.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/proc_fs.h> |
| #include <linux/msi.h> |
| #include <linux/smp.h> |
| #include <linux/errno.h> |
| #include <linux/io.h> |
| #include <linux/acpi_iort.h> |
| #include <linux/slab.h> |
| #include <linux/irqdomain.h> |
| #include <linux/of_irq.h> |
| |
| #include "pci.h" |
| |
| static int pci_msi_enable = 1; |
| int pci_msi_ignore_mask; |
| |
| #define msix_table_size(flags) ((flags & PCI_MSIX_FLAGS_QSIZE) + 1) |
| |
| #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN |
| static int pci_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) |
| { |
| struct irq_domain *domain; |
| |
| domain = dev_get_msi_domain(&dev->dev); |
| if (domain && irq_domain_is_hierarchy(domain)) |
| return msi_domain_alloc_irqs(domain, &dev->dev, nvec); |
| |
| return arch_setup_msi_irqs(dev, nvec, type); |
| } |
| |
| static void pci_msi_teardown_msi_irqs(struct pci_dev *dev) |
| { |
| struct irq_domain *domain; |
| |
| domain = dev_get_msi_domain(&dev->dev); |
| if (domain && irq_domain_is_hierarchy(domain)) |
| msi_domain_free_irqs(domain, &dev->dev); |
| else |
| arch_teardown_msi_irqs(dev); |
| } |
| #else |
| #define pci_msi_setup_msi_irqs arch_setup_msi_irqs |
| #define pci_msi_teardown_msi_irqs arch_teardown_msi_irqs |
| #endif |
| |
| /* Arch hooks */ |
| |
| int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) |
| { |
| struct msi_controller *chip = dev->bus->msi; |
| int err; |
| |
| if (!chip || !chip->setup_irq) |
| return -EINVAL; |
| |
| err = chip->setup_irq(chip, dev, desc); |
| if (err < 0) |
| return err; |
| |
| irq_set_chip_data(desc->irq, chip); |
| |
| return 0; |
| } |
| |
| void __weak arch_teardown_msi_irq(unsigned int irq) |
| { |
| struct msi_controller *chip = irq_get_chip_data(irq); |
| |
| if (!chip || !chip->teardown_irq) |
| return; |
| |
| chip->teardown_irq(chip, irq); |
| } |
| |
| int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) |
| { |
| struct msi_controller *chip = dev->bus->msi; |
| struct msi_desc *entry; |
| int ret; |
| |
| if (chip && chip->setup_irqs) |
| return chip->setup_irqs(chip, dev, nvec, type); |
| /* |
| * If an architecture wants to support multiple MSI, it needs to |
| * override arch_setup_msi_irqs() |
| */ |
| if (type == PCI_CAP_ID_MSI && nvec > 1) |
| return 1; |
| |
| for_each_pci_msi_entry(entry, dev) { |
| ret = arch_setup_msi_irq(dev, entry); |
| if (ret < 0) |
| return ret; |
| if (ret > 0) |
| return -ENOSPC; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * We have a default implementation available as a separate non-weak |
| * function, as it is used by the Xen x86 PCI code |
| */ |
| void default_teardown_msi_irqs(struct pci_dev *dev) |
| { |
| int i; |
| struct msi_desc *entry; |
| |
| for_each_pci_msi_entry(entry, dev) |
| if (entry->irq) |
| for (i = 0; i < entry->nvec_used; i++) |
| arch_teardown_msi_irq(entry->irq + i); |
| } |
| |
| void __weak arch_teardown_msi_irqs(struct pci_dev *dev) |
| { |
| return default_teardown_msi_irqs(dev); |
| } |
| |
| static void default_restore_msi_irq(struct pci_dev *dev, int irq) |
| { |
| struct msi_desc *entry; |
| |
| entry = NULL; |
| if (dev->msix_enabled) { |
| for_each_pci_msi_entry(entry, dev) { |
| if (irq == entry->irq) |
| break; |
| } |
| } else if (dev->msi_enabled) { |
| entry = irq_get_msi_desc(irq); |
| } |
| |
| if (entry) |
| __pci_write_msi_msg(entry, &entry->msg); |
| } |
| |
| void __weak arch_restore_msi_irqs(struct pci_dev *dev) |
| { |
| return default_restore_msi_irqs(dev); |
| } |
| |
| static inline __attribute_const__ u32 msi_mask(unsigned x) |
| { |
| /* Don't shift by >= width of type */ |
| if (x >= 5) |
| return 0xffffffff; |
| return (1 << (1 << x)) - 1; |
| } |
| |
| /* |
| * PCI 2.3 does not specify mask bits for each MSI interrupt. Attempting to |
| * mask all MSI interrupts by clearing the MSI enable bit does not work |
| * reliably as devices without an INTx disable bit will then generate a |
| * level IRQ which will never be cleared. |
| */ |
| void __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) |
| { |
| raw_spinlock_t *lock = &desc->dev->msi_lock; |
| unsigned long flags; |
| |
| if (pci_msi_ignore_mask || !desc->msi_attrib.maskbit) |
| return; |
| |
| raw_spin_lock_irqsave(lock, flags); |
| desc->masked &= ~mask; |
| desc->masked |= flag; |
| pci_write_config_dword(msi_desc_to_pci_dev(desc), desc->mask_pos, |
| desc->masked); |
| raw_spin_unlock_irqrestore(lock, flags); |
| } |
| |
| static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) |
| { |
| __pci_msi_desc_mask_irq(desc, mask, flag); |
| } |
| |
| static void __iomem *pci_msix_desc_addr(struct msi_desc *desc) |
| { |
| return desc->mask_base + |
| desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; |
| } |
| |
| /* |
| * This internal function does not flush PCI writes to the device. |
| * All users must ensure that they read from the device before either |
| * assuming that the device state is up to date, or returning out of this |
| * file. This saves a few milliseconds when initialising devices with lots |
| * of MSI-X interrupts. |
| */ |
| u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag) |
| { |
| u32 mask_bits = desc->masked; |
| |
| if (pci_msi_ignore_mask) |
| return 0; |
| |
| mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; |
| if (flag & PCI_MSIX_ENTRY_CTRL_MASKBIT) |
| mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; |
| writel(mask_bits, pci_msix_desc_addr(desc) + PCI_MSIX_ENTRY_VECTOR_CTRL); |
| |
| return mask_bits; |
| } |
| |
| static void msix_mask_irq(struct msi_desc *desc, u32 flag) |
| { |
| desc->masked = __pci_msix_desc_mask_irq(desc, flag); |
| } |
| |
| static void msi_set_mask_bit(struct irq_data *data, u32 flag) |
| { |
| struct msi_desc *desc = irq_data_get_msi_desc(data); |
| |
| if (desc->msi_attrib.is_msix) { |
| msix_mask_irq(desc, flag); |
| readl(desc->mask_base); /* Flush write to device */ |
| } else { |
| unsigned offset = data->irq - desc->irq; |
| msi_mask_irq(desc, 1 << offset, flag << offset); |
| } |
| } |
| |
| /** |
| * pci_msi_mask_irq - Generic irq chip callback to mask PCI/MSI interrupts |
| * @data: pointer to irqdata associated to that interrupt |
| */ |
| void pci_msi_mask_irq(struct irq_data *data) |
| { |
| msi_set_mask_bit(data, 1); |
| } |
| EXPORT_SYMBOL_GPL(pci_msi_mask_irq); |
| |
| /** |
| * pci_msi_unmask_irq - Generic irq chip callback to unmask PCI/MSI interrupts |
| * @data: pointer to irqdata associated to that interrupt |
| */ |
| void pci_msi_unmask_irq(struct irq_data *data) |
| { |
| msi_set_mask_bit(data, 0); |
| } |
| EXPORT_SYMBOL_GPL(pci_msi_unmask_irq); |
| |
| void default_restore_msi_irqs(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| |
| for_each_pci_msi_entry(entry, dev) |
| default_restore_msi_irq(dev, entry->irq); |
| } |
| |
| void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg) |
| { |
| struct pci_dev *dev = msi_desc_to_pci_dev(entry); |
| |
| BUG_ON(dev->current_state != PCI_D0); |
| |
| if (entry->msi_attrib.is_msix) { |
| void __iomem *base = pci_msix_desc_addr(entry); |
| |
| msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); |
| msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); |
| msg->data = readl(base + PCI_MSIX_ENTRY_DATA); |
| } else { |
| int pos = dev->msi_cap; |
| u16 data; |
| |
| pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, |
| &msg->address_lo); |
| if (entry->msi_attrib.is_64) { |
| pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, |
| &msg->address_hi); |
| pci_read_config_word(dev, pos + PCI_MSI_DATA_64, &data); |
| } else { |
| msg->address_hi = 0; |
| pci_read_config_word(dev, pos + PCI_MSI_DATA_32, &data); |
| } |
| msg->data = data; |
| } |
| } |
| |
| void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) |
| { |
| struct pci_dev *dev = msi_desc_to_pci_dev(entry); |
| |
| if (dev->current_state != PCI_D0 || pci_dev_is_disconnected(dev)) { |
| /* Don't touch the hardware now */ |
| } else if (entry->msi_attrib.is_msix) { |
| void __iomem *base = pci_msix_desc_addr(entry); |
| bool unmasked = !(entry->masked & PCI_MSIX_ENTRY_CTRL_MASKBIT); |
| |
| /* |
| * The specification mandates that the entry is masked |
| * when the message is modified: |
| * |
| * "If software changes the Address or Data value of an |
| * entry while the entry is unmasked, the result is |
| * undefined." |
| */ |
| if (unmasked) |
| __pci_msix_desc_mask_irq(entry, PCI_MSIX_ENTRY_CTRL_MASKBIT); |
| |
| writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); |
| writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); |
| writel(msg->data, base + PCI_MSIX_ENTRY_DATA); |
| |
| if (unmasked) |
| __pci_msix_desc_mask_irq(entry, 0); |
| |
| /* Ensure that the writes are visible in the device */ |
| readl(base + PCI_MSIX_ENTRY_DATA); |
| } else { |
| int pos = dev->msi_cap; |
| u16 msgctl; |
| |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl); |
| msgctl &= ~PCI_MSI_FLAGS_QSIZE; |
| msgctl |= entry->msi_attrib.multiple << 4; |
| pci_write_config_word(dev, pos + PCI_MSI_FLAGS, msgctl); |
| |
| pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, |
| msg->address_lo); |
| if (entry->msi_attrib.is_64) { |
| pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, |
| msg->address_hi); |
| pci_write_config_word(dev, pos + PCI_MSI_DATA_64, |
| msg->data); |
| } else { |
| pci_write_config_word(dev, pos + PCI_MSI_DATA_32, |
| msg->data); |
| } |
| /* Ensure that the writes are visible in the device */ |
| pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl); |
| } |
| entry->msg = *msg; |
| } |
| |
| void pci_write_msi_msg(unsigned int irq, struct msi_msg *msg) |
| { |
| struct msi_desc *entry = irq_get_msi_desc(irq); |
| |
| __pci_write_msi_msg(entry, msg); |
| } |
| EXPORT_SYMBOL_GPL(pci_write_msi_msg); |
| |
| static void free_msi_irqs(struct pci_dev *dev) |
| { |
| struct list_head *msi_list = dev_to_msi_list(&dev->dev); |
| struct msi_desc *entry, *tmp; |
| struct attribute **msi_attrs; |
| struct device_attribute *dev_attr; |
| int i, count = 0; |
| |
| for_each_pci_msi_entry(entry, dev) |
| if (entry->irq) |
| for (i = 0; i < entry->nvec_used; i++) |
| BUG_ON(irq_has_action(entry->irq + i)); |
| |
| if (dev->msi_irq_groups) { |
| sysfs_remove_groups(&dev->dev.kobj, dev->msi_irq_groups); |
| msi_attrs = dev->msi_irq_groups[0]->attrs; |
| while (msi_attrs[count]) { |
| dev_attr = container_of(msi_attrs[count], |
| struct device_attribute, attr); |
| kfree(dev_attr->attr.name); |
| kfree(dev_attr); |
| ++count; |
| } |
| kfree(msi_attrs); |
| kfree(dev->msi_irq_groups[0]); |
| kfree(dev->msi_irq_groups); |
| dev->msi_irq_groups = NULL; |
| } |
| |
| pci_msi_teardown_msi_irqs(dev); |
| |
| list_for_each_entry_safe(entry, tmp, msi_list, list) { |
| if (entry->msi_attrib.is_msix) { |
| if (list_is_last(&entry->list, msi_list)) |
| iounmap(entry->mask_base); |
| } |
| |
| list_del(&entry->list); |
| free_msi_entry(entry); |
| } |
| } |
| |
| static void pci_intx_for_msi(struct pci_dev *dev, int enable) |
| { |
| if (!(dev->dev_flags & PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG)) |
| pci_intx(dev, enable); |
| } |
| |
| static void __pci_restore_msi_state(struct pci_dev *dev) |
| { |
| u16 control; |
| struct msi_desc *entry; |
| |
| if (!dev->msi_enabled) |
| return; |
| |
| entry = irq_get_msi_desc(dev->irq); |
| |
| pci_intx_for_msi(dev, 0); |
| pci_msi_set_enable(dev, 0); |
| arch_restore_msi_irqs(dev); |
| |
| pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); |
| msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap), |
| entry->masked); |
| control &= ~PCI_MSI_FLAGS_QSIZE; |
| control |= (entry->msi_attrib.multiple << 4) | PCI_MSI_FLAGS_ENABLE; |
| pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control); |
| } |
| |
| static void __pci_restore_msix_state(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| |
| if (!dev->msix_enabled) |
| return; |
| BUG_ON(list_empty(dev_to_msi_list(&dev->dev))); |
| |
| /* route the table */ |
| pci_intx_for_msi(dev, 0); |
| pci_msix_clear_and_set_ctrl(dev, 0, |
| PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL); |
| |
| arch_restore_msi_irqs(dev); |
| for_each_pci_msi_entry(entry, dev) |
| msix_mask_irq(entry, entry->masked); |
| |
| pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0); |
| } |
| |
| void pci_restore_msi_state(struct pci_dev *dev) |
| { |
| __pci_restore_msi_state(dev); |
| __pci_restore_msix_state(dev); |
| } |
| EXPORT_SYMBOL_GPL(pci_restore_msi_state); |
| |
| static ssize_t msi_mode_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct msi_desc *entry; |
| unsigned long irq; |
| int retval; |
| |
| retval = kstrtoul(attr->attr.name, 10, &irq); |
| if (retval) |
| return retval; |
| |
| entry = irq_get_msi_desc(irq); |
| if (entry) |
| return sprintf(buf, "%s\n", |
| entry->msi_attrib.is_msix ? "msix" : "msi"); |
| |
| return -ENODEV; |
| } |
| |
| static int populate_msi_sysfs(struct pci_dev *pdev) |
| { |
| struct attribute **msi_attrs; |
| struct attribute *msi_attr; |
| struct device_attribute *msi_dev_attr; |
| struct attribute_group *msi_irq_group; |
| const struct attribute_group **msi_irq_groups; |
| struct msi_desc *entry; |
| int ret = -ENOMEM; |
| int num_msi = 0; |
| int count = 0; |
| int i; |
| |
| /* Determine how many msi entries we have */ |
| for_each_pci_msi_entry(entry, pdev) |
| num_msi += entry->nvec_used; |
| if (!num_msi) |
| return 0; |
| |
| /* Dynamically create the MSI attributes for the PCI device */ |
| msi_attrs = kzalloc(sizeof(void *) * (num_msi + 1), GFP_KERNEL); |
| if (!msi_attrs) |
| return -ENOMEM; |
| for_each_pci_msi_entry(entry, pdev) { |
| for (i = 0; i < entry->nvec_used; i++) { |
| msi_dev_attr = kzalloc(sizeof(*msi_dev_attr), GFP_KERNEL); |
| if (!msi_dev_attr) |
| goto error_attrs; |
| msi_attrs[count] = &msi_dev_attr->attr; |
| |
| sysfs_attr_init(&msi_dev_attr->attr); |
| msi_dev_attr->attr.name = kasprintf(GFP_KERNEL, "%d", |
| entry->irq + i); |
| if (!msi_dev_attr->attr.name) |
| goto error_attrs; |
| msi_dev_attr->attr.mode = S_IRUGO; |
| msi_dev_attr->show = msi_mode_show; |
| ++count; |
| } |
| } |
| |
| msi_irq_group = kzalloc(sizeof(*msi_irq_group), GFP_KERNEL); |
| if (!msi_irq_group) |
| goto error_attrs; |
| msi_irq_group->name = "msi_irqs"; |
| msi_irq_group->attrs = msi_attrs; |
| |
| msi_irq_groups = kzalloc(sizeof(void *) * 2, GFP_KERNEL); |
| if (!msi_irq_groups) |
| goto error_irq_group; |
| msi_irq_groups[0] = msi_irq_group; |
| |
| ret = sysfs_create_groups(&pdev->dev.kobj, msi_irq_groups); |
| if (ret) |
| goto error_irq_groups; |
| pdev->msi_irq_groups = msi_irq_groups; |
| |
| return 0; |
| |
| error_irq_groups: |
| kfree(msi_irq_groups); |
| error_irq_group: |
| kfree(msi_irq_group); |
| error_attrs: |
| count = 0; |
| msi_attr = msi_attrs[count]; |
| while (msi_attr) { |
| msi_dev_attr = container_of(msi_attr, struct device_attribute, attr); |
| kfree(msi_attr->name); |
| kfree(msi_dev_attr); |
| ++count; |
| msi_attr = msi_attrs[count]; |
| } |
| kfree(msi_attrs); |
| return ret; |
| } |
| |
| static struct msi_desc * |
| msi_setup_entry(struct pci_dev *dev, int nvec, const struct irq_affinity *affd) |
| { |
| struct cpumask *masks = NULL; |
| struct msi_desc *entry; |
| u16 control; |
| |
| if (affd) |
| masks = irq_create_affinity_masks(nvec, affd); |
| |
| |
| /* MSI Entry Initialization */ |
| entry = alloc_msi_entry(&dev->dev, nvec, masks); |
| if (!entry) |
| goto out; |
| |
| pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); |
| |
| entry->msi_attrib.is_msix = 0; |
| entry->msi_attrib.is_64 = !!(control & PCI_MSI_FLAGS_64BIT); |
| entry->msi_attrib.entry_nr = 0; |
| entry->msi_attrib.maskbit = !!(control & PCI_MSI_FLAGS_MASKBIT); |
| entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ |
| entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1; |
| entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec)); |
| |
| if (control & PCI_MSI_FLAGS_64BIT) |
| entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64; |
| else |
| entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32; |
| |
| /* Save the initial mask status */ |
| if (entry->msi_attrib.maskbit) |
| pci_read_config_dword(dev, entry->mask_pos, &entry->masked); |
| |
| out: |
| kfree(masks); |
| return entry; |
| } |
| |
| static int msi_verify_entries(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| |
| for_each_pci_msi_entry(entry, dev) { |
| if (!dev->no_64bit_msi || !entry->msg.address_hi) |
| continue; |
| dev_err(&dev->dev, "Device has broken 64-bit MSI but arch" |
| " tried to assign one above 4G\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| /** |
| * msi_capability_init - configure device's MSI capability structure |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * @nvec: number of interrupts to allocate |
| * @affd: description of automatic irq affinity assignments (may be %NULL) |
| * |
| * Setup the MSI capability structure of the device with the requested |
| * number of interrupts. A return value of zero indicates the successful |
| * setup of an entry with the new MSI irq. A negative return value indicates |
| * an error, and a positive return value indicates the number of interrupts |
| * which could have been allocated. |
| */ |
| static int msi_capability_init(struct pci_dev *dev, int nvec, |
| const struct irq_affinity *affd) |
| { |
| struct msi_desc *entry; |
| int ret; |
| unsigned mask; |
| |
| pci_msi_set_enable(dev, 0); /* Disable MSI during set up */ |
| |
| entry = msi_setup_entry(dev, nvec, affd); |
| if (!entry) |
| return -ENOMEM; |
| |
| /* All MSIs are unmasked by default, Mask them all */ |
| mask = msi_mask(entry->msi_attrib.multi_cap); |
| msi_mask_irq(entry, mask, mask); |
| |
| list_add_tail(&entry->list, dev_to_msi_list(&dev->dev)); |
| |
| /* Configure MSI capability structure */ |
| ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); |
| if (ret) { |
| msi_mask_irq(entry, mask, 0); |
| free_msi_irqs(dev); |
| return ret; |
| } |
| |
| ret = msi_verify_entries(dev); |
| if (ret) { |
| msi_mask_irq(entry, mask, 0); |
| free_msi_irqs(dev); |
| return ret; |
| } |
| |
| ret = populate_msi_sysfs(dev); |
| if (ret) { |
| msi_mask_irq(entry, mask, 0); |
| free_msi_irqs(dev); |
| return ret; |
| } |
| |
| /* Set MSI enabled bits */ |
| pci_intx_for_msi(dev, 0); |
| pci_msi_set_enable(dev, 1); |
| dev->msi_enabled = 1; |
| |
| pcibios_free_irq(dev); |
| dev->irq = entry->irq; |
| return 0; |
| } |
| |
| static void __iomem *msix_map_region(struct pci_dev *dev, unsigned nr_entries) |
| { |
| resource_size_t phys_addr; |
| u32 table_offset; |
| unsigned long flags; |
| u8 bir; |
| |
| pci_read_config_dword(dev, dev->msix_cap + PCI_MSIX_TABLE, |
| &table_offset); |
| bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR); |
| flags = pci_resource_flags(dev, bir); |
| if (!flags || (flags & IORESOURCE_UNSET)) |
| return NULL; |
| |
| table_offset &= PCI_MSIX_TABLE_OFFSET; |
| phys_addr = pci_resource_start(dev, bir) + table_offset; |
| |
| return ioremap_nocache(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE); |
| } |
| |
| static int msix_setup_entries(struct pci_dev *dev, void __iomem *base, |
| struct msix_entry *entries, int nvec, |
| const struct irq_affinity *affd) |
| { |
| struct cpumask *curmsk, *masks = NULL; |
| struct msi_desc *entry; |
| void __iomem *addr; |
| int ret, i; |
| |
| if (affd) |
| masks = irq_create_affinity_masks(nvec, affd); |
| |
| for (i = 0, curmsk = masks; i < nvec; i++) { |
| entry = alloc_msi_entry(&dev->dev, 1, curmsk); |
| if (!entry) { |
| if (!i) |
| iounmap(base); |
| else |
| free_msi_irqs(dev); |
| /* No enough memory. Don't try again */ |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| entry->msi_attrib.is_msix = 1; |
| entry->msi_attrib.is_64 = 1; |
| |
| if (entries) |
| entry->msi_attrib.entry_nr = entries[i].entry; |
| else |
| entry->msi_attrib.entry_nr = i; |
| entry->msi_attrib.default_irq = dev->irq; |
| entry->mask_base = base; |
| |
| addr = pci_msix_desc_addr(entry); |
| if (addr) |
| entry->masked = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL); |
| |
| list_add_tail(&entry->list, dev_to_msi_list(&dev->dev)); |
| if (masks) |
| curmsk++; |
| } |
| ret = 0; |
| out: |
| kfree(masks); |
| return ret; |
| } |
| |
| static void msix_update_entries(struct pci_dev *dev, struct msix_entry *entries) |
| { |
| struct msi_desc *entry; |
| |
| for_each_pci_msi_entry(entry, dev) { |
| if (entries) { |
| entries->vector = entry->irq; |
| entries++; |
| } |
| } |
| } |
| |
| static void msix_mask_all(void __iomem *base, int tsize) |
| { |
| u32 ctrl = PCI_MSIX_ENTRY_CTRL_MASKBIT; |
| int i; |
| |
| if (pci_msi_ignore_mask) |
| return; |
| |
| for (i = 0; i < tsize; i++, base += PCI_MSIX_ENTRY_SIZE) |
| writel(ctrl, base + PCI_MSIX_ENTRY_VECTOR_CTRL); |
| } |
| |
| /** |
| * msix_capability_init - configure device's MSI-X capability |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * @entries: pointer to an array of struct msix_entry entries |
| * @nvec: number of @entries |
| * @affd: Optional pointer to enable automatic affinity assignement |
| * |
| * Setup the MSI-X capability structure of device function with a |
| * single MSI-X irq. A return of zero indicates the successful setup of |
| * requested MSI-X entries with allocated irqs or non-zero for otherwise. |
| **/ |
| static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, |
| int nvec, const struct irq_affinity *affd) |
| { |
| void __iomem *base; |
| int ret, tsize; |
| u16 control; |
| |
| /* |
| * Some devices require MSI-X to be enabled before the MSI-X |
| * registers can be accessed. Mask all the vectors to prevent |
| * interrupts coming in before they're fully set up. |
| */ |
| pci_msix_clear_and_set_ctrl(dev, 0, PCI_MSIX_FLAGS_MASKALL | |
| PCI_MSIX_FLAGS_ENABLE); |
| |
| pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control); |
| /* Request & Map MSI-X table region */ |
| tsize = msix_table_size(control); |
| base = msix_map_region(dev, tsize); |
| if (!base) { |
| ret = -ENOMEM; |
| goto out_disable; |
| } |
| |
| ret = msix_setup_entries(dev, base, entries, nvec, affd); |
| if (ret) |
| goto out_disable; |
| |
| ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX); |
| if (ret) |
| goto out_avail; |
| |
| /* Check if all MSI entries honor device restrictions */ |
| ret = msi_verify_entries(dev); |
| if (ret) |
| goto out_free; |
| |
| msix_update_entries(dev, entries); |
| |
| ret = populate_msi_sysfs(dev); |
| if (ret) |
| goto out_free; |
| |
| /* Set MSI-X enabled bits and unmask the function */ |
| pci_intx_for_msi(dev, 0); |
| dev->msix_enabled = 1; |
| |
| /* |
| * Ensure that all table entries are masked to prevent |
| * stale entries from firing in a crash kernel. |
| * |
| * Done late to deal with a broken Marvell NVME device |
| * which takes the MSI-X mask bits into account even |
| * when MSI-X is disabled, which prevents MSI delivery. |
| */ |
| msix_mask_all(base, tsize); |
| pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0); |
| |
| pcibios_free_irq(dev); |
| return 0; |
| |
| out_avail: |
| if (ret < 0) { |
| /* |
| * If we had some success, report the number of irqs |
| * we succeeded in setting up. |
| */ |
| struct msi_desc *entry; |
| int avail = 0; |
| |
| for_each_pci_msi_entry(entry, dev) { |
| if (entry->irq != 0) |
| avail++; |
| } |
| if (avail != 0) |
| ret = avail; |
| } |
| |
| out_free: |
| free_msi_irqs(dev); |
| |
| out_disable: |
| pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE, 0); |
| |
| return ret; |
| } |
| |
| /** |
| * pci_msi_supported - check whether MSI may be enabled on a device |
| * @dev: pointer to the pci_dev data structure of MSI device function |
| * @nvec: how many MSIs have been requested ? |
| * |
| * Look at global flags, the device itself, and its parent buses |
| * to determine if MSI/-X are supported for the device. If MSI/-X is |
| * supported return 1, else return 0. |
| **/ |
| static int pci_msi_supported(struct pci_dev *dev, int nvec) |
| { |
| struct pci_bus *bus; |
| |
| /* MSI must be globally enabled and supported by the device */ |
| if (!pci_msi_enable) |
| return 0; |
| |
| if (!dev || dev->no_msi || dev->current_state != PCI_D0) |
| return 0; |
| |
| /* |
| * You can't ask to have 0 or less MSIs configured. |
| * a) it's stupid .. |
| * b) the list manipulation code assumes nvec >= 1. |
| */ |
| if (nvec < 1) |
| return 0; |
| |
| /* |
| * Any bridge which does NOT route MSI transactions from its |
| * secondary bus to its primary bus must set NO_MSI flag on |
| * the secondary pci_bus. |
| * We expect only arch-specific PCI host bus controller driver |
| * or quirks for specific PCI bridges to be setting NO_MSI. |
| */ |
| for (bus = dev->bus; bus; bus = bus->parent) |
| if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI) |
| return 0; |
| |
| return 1; |
| } |
| |
| /** |
| * pci_msi_vec_count - Return the number of MSI vectors a device can send |
| * @dev: device to report about |
| * |
| * This function returns the number of MSI vectors a device requested via |
| * Multiple Message Capable register. It returns a negative errno if the |
| * device is not capable sending MSI interrupts. Otherwise, the call succeeds |
| * and returns a power of two, up to a maximum of 2^5 (32), according to the |
| * MSI specification. |
| **/ |
| int pci_msi_vec_count(struct pci_dev *dev) |
| { |
| int ret; |
| u16 msgctl; |
| |
| if (!dev->msi_cap) |
| return -EINVAL; |
| |
| pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl); |
| ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pci_msi_vec_count); |
| |
| static void pci_msi_shutdown(struct pci_dev *dev) |
| { |
| struct msi_desc *desc; |
| u32 mask; |
| |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) |
| return; |
| |
| BUG_ON(list_empty(dev_to_msi_list(&dev->dev))); |
| desc = first_pci_msi_entry(dev); |
| |
| pci_msi_set_enable(dev, 0); |
| pci_intx_for_msi(dev, 1); |
| dev->msi_enabled = 0; |
| |
| /* Return the device with MSI unmasked as initial states */ |
| mask = msi_mask(desc->msi_attrib.multi_cap); |
| msi_mask_irq(desc, mask, 0); |
| |
| /* Restore dev->irq to its default pin-assertion irq */ |
| dev->irq = desc->msi_attrib.default_irq; |
| pcibios_alloc_irq(dev); |
| } |
| |
| void pci_disable_msi(struct pci_dev *dev) |
| { |
| if (!pci_msi_enable || !dev || !dev->msi_enabled) |
| return; |
| |
| pci_msi_shutdown(dev); |
| free_msi_irqs(dev); |
| } |
| EXPORT_SYMBOL(pci_disable_msi); |
| |
| /** |
| * pci_msix_vec_count - return the number of device's MSI-X table entries |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * This function returns the number of device's MSI-X table entries and |
| * therefore the number of MSI-X vectors device is capable of sending. |
| * It returns a negative errno if the device is not capable of sending MSI-X |
| * interrupts. |
| **/ |
| int pci_msix_vec_count(struct pci_dev *dev) |
| { |
| u16 control; |
| |
| if (!dev->msix_cap) |
| return -EINVAL; |
| |
| pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control); |
| return msix_table_size(control); |
| } |
| EXPORT_SYMBOL(pci_msix_vec_count); |
| |
| static int __pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, |
| int nvec, const struct irq_affinity *affd) |
| { |
| int nr_entries; |
| int i, j; |
| |
| if (!pci_msi_supported(dev, nvec)) |
| return -EINVAL; |
| |
| nr_entries = pci_msix_vec_count(dev); |
| if (nr_entries < 0) |
| return nr_entries; |
| if (nvec > nr_entries) |
| return nr_entries; |
| |
| if (entries) { |
| /* Check for any invalid entries */ |
| for (i = 0; i < nvec; i++) { |
| if (entries[i].entry >= nr_entries) |
| return -EINVAL; /* invalid entry */ |
| for (j = i + 1; j < nvec; j++) { |
| if (entries[i].entry == entries[j].entry) |
| return -EINVAL; /* duplicate entry */ |
| } |
| } |
| } |
| |
| /* Check whether driver already requested for MSI irq */ |
| if (dev->msi_enabled) { |
| dev_info(&dev->dev, "can't enable MSI-X (MSI IRQ already assigned)\n"); |
| return -EINVAL; |
| } |
| return msix_capability_init(dev, entries, nvec, affd); |
| } |
| |
| static void pci_msix_shutdown(struct pci_dev *dev) |
| { |
| struct msi_desc *entry; |
| |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) |
| return; |
| |
| if (pci_dev_is_disconnected(dev)) { |
| dev->msix_enabled = 0; |
| return; |
| } |
| |
| /* Return the device with MSI-X masked as initial states */ |
| for_each_pci_msi_entry(entry, dev) |
| __pci_msix_desc_mask_irq(entry, 1); |
| |
| pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); |
| pci_intx_for_msi(dev, 1); |
| dev->msix_enabled = 0; |
| pcibios_alloc_irq(dev); |
| } |
| |
| void pci_disable_msix(struct pci_dev *dev) |
| { |
| if (!pci_msi_enable || !dev || !dev->msix_enabled) |
| return; |
| |
| pci_msix_shutdown(dev); |
| free_msi_irqs(dev); |
| } |
| EXPORT_SYMBOL(pci_disable_msix); |
| |
| void pci_no_msi(void) |
| { |
| pci_msi_enable = 0; |
| } |
| |
| /** |
| * pci_msi_enabled - is MSI enabled? |
| * |
| * Returns true if MSI has not been disabled by the command-line option |
| * pci=nomsi. |
| **/ |
| int pci_msi_enabled(void) |
| { |
| return pci_msi_enable; |
| } |
| EXPORT_SYMBOL(pci_msi_enabled); |
| |
| static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, |
| const struct irq_affinity *affd) |
| { |
| int nvec; |
| int rc; |
| |
| if (!pci_msi_supported(dev, minvec)) |
| return -EINVAL; |
| |
| /* Check whether driver already requested MSI-X irqs */ |
| if (dev->msix_enabled) { |
| dev_info(&dev->dev, |
| "can't enable MSI (MSI-X already enabled)\n"); |
| return -EINVAL; |
| } |
| |
| if (maxvec < minvec) |
| return -ERANGE; |
| |
| if (WARN_ON_ONCE(dev->msi_enabled)) |
| return -EINVAL; |
| |
| nvec = pci_msi_vec_count(dev); |
| if (nvec < 0) |
| return nvec; |
| if (nvec < minvec) |
| return -ENOSPC; |
| |
| if (nvec > maxvec) |
| nvec = maxvec; |
| |
| for (;;) { |
| if (affd) { |
| nvec = irq_calc_affinity_vectors(minvec, nvec, affd); |
| if (nvec < minvec) |
| return -ENOSPC; |
| } |
| |
| rc = msi_capability_init(dev, nvec, affd); |
| if (rc == 0) |
| return nvec; |
| |
| if (rc < 0) |
| return rc; |
| if (rc < minvec) |
| return -ENOSPC; |
| |
| nvec = rc; |
| } |
| } |
| |
| /* deprecated, don't use */ |
| int pci_enable_msi(struct pci_dev *dev) |
| { |
| int rc = __pci_enable_msi_range(dev, 1, 1, NULL); |
| if (rc < 0) |
| return rc; |
| return 0; |
| } |
| EXPORT_SYMBOL(pci_enable_msi); |
| |
| static int __pci_enable_msix_range(struct pci_dev *dev, |
| struct msix_entry *entries, int minvec, |
| int maxvec, const struct irq_affinity *affd) |
| { |
| int rc, nvec = maxvec; |
| |
| if (maxvec < minvec) |
| return -ERANGE; |
| |
| if (WARN_ON_ONCE(dev->msix_enabled)) |
| return -EINVAL; |
| |
| for (;;) { |
| if (affd) { |
| nvec = irq_calc_affinity_vectors(minvec, nvec, affd); |
| if (nvec < minvec) |
| return -ENOSPC; |
| } |
| |
| rc = __pci_enable_msix(dev, entries, nvec, affd); |
| if (rc == 0) |
| return nvec; |
| |
| if (rc < 0) |
| return rc; |
| if (rc < minvec) |
| return -ENOSPC; |
| |
| nvec = rc; |
| } |
| } |
| |
| /** |
| * pci_enable_msix_range - configure device's MSI-X capability structure |
| * @dev: pointer to the pci_dev data structure of MSI-X device function |
| * @entries: pointer to an array of MSI-X entries |
| * @minvec: minimum number of MSI-X irqs requested |
| * @maxvec: maximum number of MSI-X irqs requested |
| * |
| * Setup the MSI-X capability structure of device function with a maximum |
| * possible number of interrupts in the range between @minvec and @maxvec |
| * upon its software driver call to request for MSI-X mode enabled on its |
| * hardware device function. It returns a negative errno if an error occurs. |
| * If it succeeds, it returns the actual number of interrupts allocated and |
| * indicates the successful configuration of MSI-X capability structure |
| * with new allocated MSI-X interrupts. |
| **/ |
| int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, |
| int minvec, int maxvec) |
| { |
| return __pci_enable_msix_range(dev, entries, minvec, maxvec, NULL); |
| } |
| EXPORT_SYMBOL(pci_enable_msix_range); |
| |
| /** |
| * pci_alloc_irq_vectors_affinity - allocate multiple IRQs for a device |
| * @dev: PCI device to operate on |
| * @min_vecs: minimum number of vectors required (must be >= 1) |
| * @max_vecs: maximum (desired) number of vectors |
| * @flags: flags or quirks for the allocation |
| * @affd: optional description of the affinity requirements |
| * |
| * Allocate up to @max_vecs interrupt vectors for @dev, using MSI-X or MSI |
| * vectors if available, and fall back to a single legacy vector |
| * if neither is available. Return the number of vectors allocated, |
| * (which might be smaller than @max_vecs) if successful, or a negative |
| * error code on error. If less than @min_vecs interrupt vectors are |
| * available for @dev the function will fail with -ENOSPC. |
| * |
| * To get the Linux IRQ number used for a vector that can be passed to |
| * request_irq() use the pci_irq_vector() helper. |
| */ |
| int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs, |
| unsigned int max_vecs, unsigned int flags, |
| const struct irq_affinity *affd) |
| { |
| static const struct irq_affinity msi_default_affd; |
| int msix_vecs = -ENOSPC; |
| int msi_vecs = -ENOSPC; |
| |
| if (flags & PCI_IRQ_AFFINITY) { |
| if (!affd) |
| affd = &msi_default_affd; |
| } else { |
| if (WARN_ON(affd)) |
| affd = NULL; |
| } |
| |
| if (flags & PCI_IRQ_MSIX) { |
| msix_vecs = __pci_enable_msix_range(dev, NULL, min_vecs, |
| max_vecs, affd); |
| if (msix_vecs > 0) |
| return msix_vecs; |
| } |
| |
| if (flags & PCI_IRQ_MSI) { |
| msi_vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, |
| affd); |
| if (msi_vecs > 0) |
| return msi_vecs; |
| } |
| |
| /* use legacy irq if allowed */ |
| if (flags & PCI_IRQ_LEGACY) { |
| if (min_vecs == 1 && dev->irq) { |
| pci_intx(dev, 1); |
| return 1; |
| } |
| } |
| |
| if (msix_vecs == -ENOSPC) |
| return -ENOSPC; |
| return msi_vecs; |
| } |
| EXPORT_SYMBOL(pci_alloc_irq_vectors_affinity); |
| |
| /** |
| * pci_free_irq_vectors - free previously allocated IRQs for a device |
| * @dev: PCI device to operate on |
| * |
| * Undoes the allocations and enabling in pci_alloc_irq_vectors(). |
| */ |
| void pci_free_irq_vectors(struct pci_dev *dev) |
| { |
| pci_disable_msix(dev); |
| pci_disable_msi(dev); |
| } |
| EXPORT_SYMBOL(pci_free_irq_vectors); |
| |
| /** |
| * pci_irq_vector - return Linux IRQ number of a device vector |
| * @dev: PCI device to operate on |
| * @nr: device-relative interrupt vector index (0-based). |
| */ |
| int pci_irq_vector(struct pci_dev *dev, unsigned int nr) |
| { |
| if (dev->msix_enabled) { |
| struct msi_desc *entry; |
| int i = 0; |
| |
| for_each_pci_msi_entry(entry, dev) { |
| if (i == nr) |
| return entry->irq; |
| i++; |
| } |
| WARN_ON_ONCE(1); |
| return -EINVAL; |
| } |
| |
| if (dev->msi_enabled) { |
| struct msi_desc *entry = first_pci_msi_entry(dev); |
| |
| if (WARN_ON_ONCE(nr >= entry->nvec_used)) |
| return -EINVAL; |
| } else { |
| if (WARN_ON_ONCE(nr > 0)) |
| return -EINVAL; |
| } |
| |
| return dev->irq + nr; |
| } |
| EXPORT_SYMBOL(pci_irq_vector); |
| |
| /** |
| * pci_irq_get_affinity - return the affinity of a particular msi vector |
| * @dev: PCI device to operate on |
| * @nr: device-relative interrupt vector index (0-based). |
| */ |
| const struct cpumask *pci_irq_get_affinity(struct pci_dev *dev, int nr) |
| { |
| if (dev->msix_enabled) { |
| struct msi_desc *entry; |
| int i = 0; |
| |
| for_each_pci_msi_entry(entry, dev) { |
| if (i == nr) |
| return entry->affinity; |
| i++; |
| } |
| WARN_ON_ONCE(1); |
| return NULL; |
| } else if (dev->msi_enabled) { |
| struct msi_desc *entry = first_pci_msi_entry(dev); |
| |
| if (WARN_ON_ONCE(!entry || !entry->affinity || |
| nr >= entry->nvec_used)) |
| return NULL; |
| |
| return &entry->affinity[nr]; |
| } else { |
| return cpu_possible_mask; |
| } |
| } |
| EXPORT_SYMBOL(pci_irq_get_affinity); |
| |
| /** |
| * pci_irq_get_node - return the numa node of a particular msi vector |
| * @pdev: PCI device to operate on |
| * @vec: device-relative interrupt vector index (0-based). |
| */ |
| int pci_irq_get_node(struct pci_dev *pdev, int vec) |
| { |
| const struct cpumask *mask; |
| |
| mask = pci_irq_get_affinity(pdev, vec); |
| if (mask) |
| return local_memory_node(cpu_to_node(cpumask_first(mask))); |
| return dev_to_node(&pdev->dev); |
| } |
| EXPORT_SYMBOL(pci_irq_get_node); |
| |
| struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc) |
| { |
| return to_pci_dev(desc->dev); |
| } |
| EXPORT_SYMBOL(msi_desc_to_pci_dev); |
| |
| void *msi_desc_to_pci_sysdata(struct msi_desc *desc) |
| { |
| struct pci_dev *dev = msi_desc_to_pci_dev(desc); |
| |
| return dev->bus->sysdata; |
| } |
| EXPORT_SYMBOL_GPL(msi_desc_to_pci_sysdata); |
| |
| #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN |
| /** |
| * pci_msi_domain_write_msg - Helper to write MSI message to PCI config space |
| * @irq_data: Pointer to interrupt data of the MSI interrupt |
| * @msg: Pointer to the message |
| */ |
| void pci_msi_domain_write_msg(struct irq_data *irq_data, struct msi_msg *msg) |
| { |
| struct msi_desc *desc = irq_data_get_msi_desc(irq_data); |
| |
| /* |
| * For MSI-X desc->irq is always equal to irq_data->irq. For |
| * MSI only the first interrupt of MULTI MSI passes the test. |
| */ |
| if (desc->irq == irq_data->irq) |
| __pci_write_msi_msg(desc, msg); |
| } |
| |
| /** |
| * pci_msi_domain_calc_hwirq - Generate a unique ID for an MSI source |
| * @dev: Pointer to the PCI device |
| * @desc: Pointer to the msi descriptor |
| * |
| * The ID number is only used within the irqdomain. |
| */ |
| irq_hw_number_t pci_msi_domain_calc_hwirq(struct pci_dev *dev, |
| struct msi_desc *desc) |
| { |
| return (irq_hw_number_t)desc->msi_attrib.entry_nr | |
| PCI_DEVID(dev->bus->number, dev->devfn) << 11 | |
| ((irq_hw_number_t)(pci_domain_nr(dev->bus) & 0xFFFFFFFF)) << 27; |
| } |
| |
| static inline bool pci_msi_desc_is_multi_msi(struct msi_desc *desc) |
| { |
| return !desc->msi_attrib.is_msix && desc->nvec_used > 1; |
| } |
| |
| /** |
| * pci_msi_domain_check_cap - Verify that @domain supports the capabilities for @dev |
| * @domain: The interrupt domain to check |
| * @info: The domain info for verification |
| * @dev: The device to check |
| * |
| * Returns: |
| * 0 if the functionality is supported |
| * 1 if Multi MSI is requested, but the domain does not support it |
| * -ENOTSUPP otherwise |
| */ |
| int pci_msi_domain_check_cap(struct irq_domain *domain, |
| struct msi_domain_info *info, struct device *dev) |
| { |
| struct msi_desc *desc = first_pci_msi_entry(to_pci_dev(dev)); |
| |
| /* Special handling to support __pci_enable_msi_range() */ |
| if (pci_msi_desc_is_multi_msi(desc) && |
| !(info->flags & MSI_FLAG_MULTI_PCI_MSI)) |
| return 1; |
| else if (desc->msi_attrib.is_msix && !(info->flags & MSI_FLAG_PCI_MSIX)) |
| return -ENOTSUPP; |
| |
| return 0; |
| } |
| |
| static int pci_msi_domain_handle_error(struct irq_domain *domain, |
| struct msi_desc *desc, int error) |
| { |
| /* Special handling to support __pci_enable_msi_range() */ |
| if (pci_msi_desc_is_multi_msi(desc) && error == -ENOSPC) |
| return 1; |
| |
| return error; |
| } |
| |
| #ifdef GENERIC_MSI_DOMAIN_OPS |
| static void pci_msi_domain_set_desc(msi_alloc_info_t *arg, |
| struct msi_desc *desc) |
| { |
| arg->desc = desc; |
| arg->hwirq = pci_msi_domain_calc_hwirq(msi_desc_to_pci_dev(desc), |
| desc); |
| } |
| #else |
| #define pci_msi_domain_set_desc NULL |
| #endif |
| |
| static struct msi_domain_ops pci_msi_domain_ops_default = { |
| .set_desc = pci_msi_domain_set_desc, |
| .msi_check = pci_msi_domain_check_cap, |
| .handle_error = pci_msi_domain_handle_error, |
| }; |
| |
| static void pci_msi_domain_update_dom_ops(struct msi_domain_info *info) |
| { |
| struct msi_domain_ops *ops = info->ops; |
| |
| if (ops == NULL) { |
| info->ops = &pci_msi_domain_ops_default; |
| } else { |
| if (ops->set_desc == NULL) |
| ops->set_desc = pci_msi_domain_set_desc; |
| if (ops->msi_check == NULL) |
| ops->msi_check = pci_msi_domain_check_cap; |
| if (ops->handle_error == NULL) |
| ops->handle_error = pci_msi_domain_handle_error; |
| } |
| } |
| |
| static void pci_msi_domain_update_chip_ops(struct msi_domain_info *info) |
| { |
| struct irq_chip *chip = info->chip; |
| |
| BUG_ON(!chip); |
| if (!chip->irq_write_msi_msg) |
| chip->irq_write_msi_msg = pci_msi_domain_write_msg; |
| if (!chip->irq_mask) |
| chip->irq_mask = pci_msi_mask_irq; |
| if (!chip->irq_unmask) |
| chip->irq_unmask = pci_msi_unmask_irq; |
| } |
| |
| /** |
| * pci_msi_create_irq_domain - Create a MSI interrupt domain |
| * @fwnode: Optional fwnode of the interrupt controller |
| * @info: MSI domain info |
| * @parent: Parent irq domain |
| * |
| * Updates the domain and chip ops and creates a MSI interrupt domain. |
| * |
| * Returns: |
| * A domain pointer or NULL in case of failure. |
| */ |
| struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode, |
| struct msi_domain_info *info, |
| struct irq_domain *parent) |
| { |
| struct irq_domain *domain; |
| |
| if (info->flags & MSI_FLAG_USE_DEF_DOM_OPS) |
| pci_msi_domain_update_dom_ops(info); |
| if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS) |
| pci_msi_domain_update_chip_ops(info); |
| |
| info->flags |= MSI_FLAG_ACTIVATE_EARLY; |
| |
| domain = msi_create_irq_domain(fwnode, info, parent); |
| if (!domain) |
| return NULL; |
| |
| irq_domain_update_bus_token(domain, DOMAIN_BUS_PCI_MSI); |
| return domain; |
| } |
| EXPORT_SYMBOL_GPL(pci_msi_create_irq_domain); |
| |
| /* |
| * Users of the generic MSI infrastructure expect a device to have a single ID, |
| * so with DMA aliases we have to pick the least-worst compromise. Devices with |
| * DMA phantom functions tend to still emit MSIs from the real function number, |
| * so we ignore those and only consider topological aliases where either the |
| * alias device or RID appears on a different bus number. We also make the |
| * reasonable assumption that bridges are walked in an upstream direction (so |
| * the last one seen wins), and the much braver assumption that the most likely |
| * case is that of PCI->PCIe so we should always use the alias RID. This echoes |
| * the logic from intel_irq_remapping's set_msi_sid(), which presumably works |
| * well enough in practice; in the face of the horrible PCIe<->PCI-X conditions |
| * for taking ownership all we can really do is close our eyes and hope... |
| */ |
| static int get_msi_id_cb(struct pci_dev *pdev, u16 alias, void *data) |
| { |
| u32 *pa = data; |
| u8 bus = PCI_BUS_NUM(*pa); |
| |
| if (pdev->bus->number != bus || PCI_BUS_NUM(alias) != bus) |
| *pa = alias; |
| |
| return 0; |
| } |
| |
| /** |
| * pci_msi_domain_get_msi_rid - Get the MSI requester id (RID) |
| * @domain: The interrupt domain |
| * @pdev: The PCI device. |
| * |
| * The RID for a device is formed from the alias, with a firmware |
| * supplied mapping applied |
| * |
| * Returns: The RID. |
| */ |
| u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev) |
| { |
| struct device_node *of_node; |
| u32 rid = PCI_DEVID(pdev->bus->number, pdev->devfn); |
| |
| pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid); |
| |
| of_node = irq_domain_get_of_node(domain); |
| rid = of_node ? of_msi_map_rid(&pdev->dev, of_node, rid) : |
| iort_msi_map_rid(&pdev->dev, rid); |
| |
| return rid; |
| } |
| |
| /** |
| * pci_msi_get_device_domain - Get the MSI domain for a given PCI device |
| * @pdev: The PCI device |
| * |
| * Use the firmware data to find a device-specific MSI domain |
| * (i.e. not one that is set as a default). |
| * |
| * Returns: The corresponding MSI domain or NULL if none has been found. |
| */ |
| struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev) |
| { |
| struct irq_domain *dom; |
| u32 rid = PCI_DEVID(pdev->bus->number, pdev->devfn); |
| |
| pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid); |
| dom = of_msi_map_get_device_domain(&pdev->dev, rid); |
| if (!dom) |
| dom = iort_get_device_domain(&pdev->dev, rid); |
| return dom; |
| } |
| #endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */ |