| /* |
| * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #ifndef __LOCAL_ST21NFCA_H_ |
| #define __LOCAL_ST21NFCA_H_ |
| |
| #include <net/nfc/hci.h> |
| #include <linux/skbuff.h> |
| #include <linux/workqueue.h> |
| |
| #define HCI_MODE 0 |
| |
| /* framing in HCI mode */ |
| #define ST21NFCA_SOF_EOF_LEN 2 |
| |
| /* Almost every time value is 0 */ |
| #define ST21NFCA_HCI_LLC_LEN 1 |
| |
| /* Size in worst case : |
| * In normal case CRC len = 2 but byte stuffing |
| * may appear in case one CRC byte = ST21NFCA_SOF_EOF |
| */ |
| #define ST21NFCA_HCI_LLC_CRC 4 |
| |
| #define ST21NFCA_HCI_LLC_LEN_CRC (ST21NFCA_SOF_EOF_LEN + \ |
| ST21NFCA_HCI_LLC_LEN + \ |
| ST21NFCA_HCI_LLC_CRC) |
| #define ST21NFCA_HCI_LLC_MIN_SIZE (1 + ST21NFCA_HCI_LLC_LEN_CRC) |
| |
| /* Worst case when adding byte stuffing between each byte */ |
| #define ST21NFCA_HCI_LLC_MAX_PAYLOAD 29 |
| #define ST21NFCA_HCI_LLC_MAX_SIZE (ST21NFCA_HCI_LLC_LEN_CRC + 1 + \ |
| ST21NFCA_HCI_LLC_MAX_PAYLOAD) |
| |
| /* Reader RF commands */ |
| #define ST21NFCA_WR_XCHG_DATA 0x10 |
| |
| #define ST21NFCA_DEVICE_MGNT_GATE 0x01 |
| #define ST21NFCA_RF_READER_F_GATE 0x14 |
| #define ST21NFCA_RF_CARD_F_GATE 0x24 |
| #define ST21NFCA_APDU_READER_GATE 0xf0 |
| #define ST21NFCA_CONNECTIVITY_GATE 0x41 |
| |
| /* |
| * ref ISO7816-3 chap 8.1. the initial character TS is followed by a |
| * sequence of at most 32 characters. |
| */ |
| #define ST21NFCA_ESE_MAX_LENGTH 33 |
| #define ST21NFCA_ESE_HOST_ID 0xc0 |
| |
| #define DRIVER_DESC "HCI NFC driver for ST21NFCA" |
| |
| #define ST21NFCA_HCI_MODE 0 |
| #define ST21NFCA_NUM_DEVICES 256 |
| |
| #define ST21NFCA_VENDOR_OUI 0x0080E1 /* STMicroelectronics */ |
| #define ST21NFCA_FACTORY_MODE 2 |
| |
| struct st21nfca_se_status { |
| bool is_ese_present; |
| bool is_uicc_present; |
| }; |
| |
| enum st21nfca_state { |
| ST21NFCA_ST_COLD, |
| ST21NFCA_ST_READY, |
| }; |
| |
| /** |
| * enum nfc_vendor_cmds - supported nfc vendor commands |
| * |
| * @FACTORY_MODE: Allow to set the driver into a mode where no secure element |
| * are activated. It does not consider any NFC_ATTR_VENDOR_DATA. |
| * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. |
| * It does not consider any NFC_ATTR_VENDOR_DATA. |
| * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example |
| * RF trimmings or low level drivers configurations (I2C, SPI, SWP). |
| * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing |
| * table following RF technology, CLF mode or protocol. |
| * @HCI_DM_GET_INFO: Allow to retrieve CLF information. |
| * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low |
| * level drivers configurations or RF trimmings. |
| * @HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete |
| * packet can be more than 8KB. |
| * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF |
| * configuration changes without CLF power off. |
| * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the |
| * white list). |
| * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF |
| * technology. When using this command to anti-collision is done. |
| * @HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF |
| * connectivity. |
| */ |
| enum nfc_vendor_cmds { |
| FACTORY_MODE, |
| HCI_CLEAR_ALL_PIPES, |
| HCI_DM_PUT_DATA, |
| HCI_DM_UPDATE_AID, |
| HCI_DM_GET_INFO, |
| HCI_DM_GET_DATA, |
| HCI_DM_LOAD, |
| HCI_DM_RESET, |
| HCI_GET_PARAM, |
| HCI_DM_FIELD_GENERATOR, |
| HCI_LOOPBACK, |
| }; |
| |
| struct st21nfca_vendor_info { |
| struct completion req_completion; |
| struct sk_buff *rx_skb; |
| }; |
| |
| struct st21nfca_dep_info { |
| struct sk_buff *tx_pending; |
| struct work_struct tx_work; |
| u8 curr_nfc_dep_pni; |
| u32 idx; |
| u8 to; |
| u8 did; |
| u8 bsi; |
| u8 bri; |
| u8 lri; |
| } __packed; |
| |
| struct st21nfca_se_info { |
| u8 atr[ST21NFCA_ESE_MAX_LENGTH]; |
| struct completion req_completion; |
| |
| struct timer_list bwi_timer; |
| int wt_timeout; /* in msecs */ |
| bool bwi_active; |
| |
| struct timer_list se_active_timer; |
| bool se_active; |
| int expected_pipes; |
| int count_pipes; |
| |
| bool xch_error; |
| |
| se_io_cb_t cb; |
| void *cb_context; |
| }; |
| |
| struct st21nfca_hci_info { |
| struct nfc_phy_ops *phy_ops; |
| void *phy_id; |
| |
| struct nfc_hci_dev *hdev; |
| struct st21nfca_se_status *se_status; |
| |
| enum st21nfca_state state; |
| |
| struct mutex info_lock; |
| |
| int async_cb_type; |
| data_exchange_cb_t async_cb; |
| void *async_cb_context; |
| |
| struct st21nfca_dep_info dep_info; |
| struct st21nfca_se_info se_info; |
| struct st21nfca_vendor_info vendor_info; |
| }; |
| |
| int st21nfca_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, |
| char *llc_name, int phy_headroom, int phy_tailroom, |
| int phy_payload, struct nfc_hci_dev **hdev, |
| struct st21nfca_se_status *se_status); |
| void st21nfca_hci_remove(struct nfc_hci_dev *hdev); |
| |
| int st21nfca_dep_event_received(struct nfc_hci_dev *hdev, |
| u8 event, struct sk_buff *skb); |
| int st21nfca_tm_send_dep_res(struct nfc_hci_dev *hdev, struct sk_buff *skb); |
| |
| int st21nfca_im_send_atr_req(struct nfc_hci_dev *hdev, u8 *gb, size_t gb_len); |
| int st21nfca_im_send_dep_req(struct nfc_hci_dev *hdev, struct sk_buff *skb); |
| void st21nfca_dep_init(struct nfc_hci_dev *hdev); |
| void st21nfca_dep_deinit(struct nfc_hci_dev *hdev); |
| |
| int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host, |
| u8 event, struct sk_buff *skb); |
| int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev, |
| u8 event, struct sk_buff *skb); |
| |
| int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev); |
| int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx); |
| int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx); |
| int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx, |
| u8 *apdu, size_t apdu_length, |
| se_io_cb_t cb, void *cb_context); |
| |
| void st21nfca_se_init(struct nfc_hci_dev *hdev); |
| void st21nfca_se_deinit(struct nfc_hci_dev *hdev); |
| |
| int st21nfca_hci_loopback_event_received(struct nfc_hci_dev *ndev, u8 event, |
| struct sk_buff *skb); |
| int st21nfca_vendor_cmds_init(struct nfc_hci_dev *ndev); |
| |
| #endif /* __LOCAL_ST21NFCA_H_ */ |