| /* |
| * Shared part of driver for MMC/SDHC controller on Cavium OCTEON and |
| * ThunderX SOCs. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2012-2017 Cavium Inc. |
| * Authors: |
| * David Daney <david.daney@cavium.com> |
| * Peter Swain <pswain@cavium.com> |
| * Steven J. Hill <steven.hill@cavium.com> |
| * Jan Glauber <jglauber@cavium.com> |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/dma-direction.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/interrupt.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/mmc/slot-gpio.h> |
| #include <linux/module.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/scatterlist.h> |
| #include <linux/time.h> |
| |
| #include "cavium.h" |
| |
| const char *cvm_mmc_irq_names[] = { |
| "MMC Buffer", |
| "MMC Command", |
| "MMC DMA", |
| "MMC Command Error", |
| "MMC DMA Error", |
| "MMC Switch", |
| "MMC Switch Error", |
| "MMC DMA int Fifo", |
| "MMC DMA int", |
| }; |
| |
| /* |
| * The Cavium MMC host hardware assumes that all commands have fixed |
| * command and response types. These are correct if MMC devices are |
| * being used. However, non-MMC devices like SD use command and |
| * response types that are unexpected by the host hardware. |
| * |
| * The command and response types can be overridden by supplying an |
| * XOR value that is applied to the type. We calculate the XOR value |
| * from the values in this table and the flags passed from the MMC |
| * core. |
| */ |
| static struct cvm_mmc_cr_type cvm_mmc_cr_types[] = { |
| {0, 0}, /* CMD0 */ |
| {0, 3}, /* CMD1 */ |
| {0, 2}, /* CMD2 */ |
| {0, 1}, /* CMD3 */ |
| {0, 0}, /* CMD4 */ |
| {0, 1}, /* CMD5 */ |
| {0, 1}, /* CMD6 */ |
| {0, 1}, /* CMD7 */ |
| {1, 1}, /* CMD8 */ |
| {0, 2}, /* CMD9 */ |
| {0, 2}, /* CMD10 */ |
| {1, 1}, /* CMD11 */ |
| {0, 1}, /* CMD12 */ |
| {0, 1}, /* CMD13 */ |
| {1, 1}, /* CMD14 */ |
| {0, 0}, /* CMD15 */ |
| {0, 1}, /* CMD16 */ |
| {1, 1}, /* CMD17 */ |
| {1, 1}, /* CMD18 */ |
| {3, 1}, /* CMD19 */ |
| {2, 1}, /* CMD20 */ |
| {0, 0}, /* CMD21 */ |
| {0, 0}, /* CMD22 */ |
| {0, 1}, /* CMD23 */ |
| {2, 1}, /* CMD24 */ |
| {2, 1}, /* CMD25 */ |
| {2, 1}, /* CMD26 */ |
| {2, 1}, /* CMD27 */ |
| {0, 1}, /* CMD28 */ |
| {0, 1}, /* CMD29 */ |
| {1, 1}, /* CMD30 */ |
| {1, 1}, /* CMD31 */ |
| {0, 0}, /* CMD32 */ |
| {0, 0}, /* CMD33 */ |
| {0, 0}, /* CMD34 */ |
| {0, 1}, /* CMD35 */ |
| {0, 1}, /* CMD36 */ |
| {0, 0}, /* CMD37 */ |
| {0, 1}, /* CMD38 */ |
| {0, 4}, /* CMD39 */ |
| {0, 5}, /* CMD40 */ |
| {0, 0}, /* CMD41 */ |
| {2, 1}, /* CMD42 */ |
| {0, 0}, /* CMD43 */ |
| {0, 0}, /* CMD44 */ |
| {0, 0}, /* CMD45 */ |
| {0, 0}, /* CMD46 */ |
| {0, 0}, /* CMD47 */ |
| {0, 0}, /* CMD48 */ |
| {0, 0}, /* CMD49 */ |
| {0, 0}, /* CMD50 */ |
| {0, 0}, /* CMD51 */ |
| {0, 0}, /* CMD52 */ |
| {0, 0}, /* CMD53 */ |
| {0, 0}, /* CMD54 */ |
| {0, 1}, /* CMD55 */ |
| {0xff, 0xff}, /* CMD56 */ |
| {0, 0}, /* CMD57 */ |
| {0, 0}, /* CMD58 */ |
| {0, 0}, /* CMD59 */ |
| {0, 0}, /* CMD60 */ |
| {0, 0}, /* CMD61 */ |
| {0, 0}, /* CMD62 */ |
| {0, 0} /* CMD63 */ |
| }; |
| |
| static struct cvm_mmc_cr_mods cvm_mmc_get_cr_mods(struct mmc_command *cmd) |
| { |
| struct cvm_mmc_cr_type *cr; |
| u8 hardware_ctype, hardware_rtype; |
| u8 desired_ctype = 0, desired_rtype = 0; |
| struct cvm_mmc_cr_mods r; |
| |
| cr = cvm_mmc_cr_types + (cmd->opcode & 0x3f); |
| hardware_ctype = cr->ctype; |
| hardware_rtype = cr->rtype; |
| if (cmd->opcode == MMC_GEN_CMD) |
| hardware_ctype = (cmd->arg & 1) ? 1 : 2; |
| |
| switch (mmc_cmd_type(cmd)) { |
| case MMC_CMD_ADTC: |
| desired_ctype = (cmd->data->flags & MMC_DATA_WRITE) ? 2 : 1; |
| break; |
| case MMC_CMD_AC: |
| case MMC_CMD_BC: |
| case MMC_CMD_BCR: |
| desired_ctype = 0; |
| break; |
| } |
| |
| switch (mmc_resp_type(cmd)) { |
| case MMC_RSP_NONE: |
| desired_rtype = 0; |
| break; |
| case MMC_RSP_R1:/* MMC_RSP_R5, MMC_RSP_R6, MMC_RSP_R7 */ |
| case MMC_RSP_R1B: |
| desired_rtype = 1; |
| break; |
| case MMC_RSP_R2: |
| desired_rtype = 2; |
| break; |
| case MMC_RSP_R3: /* MMC_RSP_R4 */ |
| desired_rtype = 3; |
| break; |
| } |
| r.ctype_xor = desired_ctype ^ hardware_ctype; |
| r.rtype_xor = desired_rtype ^ hardware_rtype; |
| return r; |
| } |
| |
| static void check_switch_errors(struct cvm_mmc_host *host) |
| { |
| u64 emm_switch; |
| |
| emm_switch = readq(host->base + MIO_EMM_SWITCH(host)); |
| if (emm_switch & MIO_EMM_SWITCH_ERR0) |
| dev_err(host->dev, "Switch power class error\n"); |
| if (emm_switch & MIO_EMM_SWITCH_ERR1) |
| dev_err(host->dev, "Switch hs timing error\n"); |
| if (emm_switch & MIO_EMM_SWITCH_ERR2) |
| dev_err(host->dev, "Switch bus width error\n"); |
| } |
| |
| static void clear_bus_id(u64 *reg) |
| { |
| u64 bus_id_mask = GENMASK_ULL(61, 60); |
| |
| *reg &= ~bus_id_mask; |
| } |
| |
| static void set_bus_id(u64 *reg, int bus_id) |
| { |
| clear_bus_id(reg); |
| *reg |= FIELD_PREP(GENMASK(61, 60), bus_id); |
| } |
| |
| static int get_bus_id(u64 reg) |
| { |
| return FIELD_GET(GENMASK_ULL(61, 60), reg); |
| } |
| |
| /* |
| * We never set the switch_exe bit since that would interfere |
| * with the commands send by the MMC core. |
| */ |
| static void do_switch(struct cvm_mmc_host *host, u64 emm_switch) |
| { |
| int retries = 100; |
| u64 rsp_sts; |
| int bus_id; |
| |
| /* |
| * Modes setting only taken from slot 0. Work around that hardware |
| * issue by first switching to slot 0. |
| */ |
| bus_id = get_bus_id(emm_switch); |
| clear_bus_id(&emm_switch); |
| writeq(emm_switch, host->base + MIO_EMM_SWITCH(host)); |
| |
| set_bus_id(&emm_switch, bus_id); |
| writeq(emm_switch, host->base + MIO_EMM_SWITCH(host)); |
| |
| /* wait for the switch to finish */ |
| do { |
| rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host)); |
| if (!(rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL)) |
| break; |
| udelay(10); |
| } while (--retries); |
| |
| check_switch_errors(host); |
| } |
| |
| static bool switch_val_changed(struct cvm_mmc_slot *slot, u64 new_val) |
| { |
| /* Match BUS_ID, HS_TIMING, BUS_WIDTH, POWER_CLASS, CLK_HI, CLK_LO */ |
| u64 match = 0x3001070fffffffffull; |
| |
| return (slot->cached_switch & match) != (new_val & match); |
| } |
| |
| static void set_wdog(struct cvm_mmc_slot *slot, unsigned int ns) |
| { |
| u64 timeout; |
| |
| if (!slot->clock) |
| return; |
| |
| if (ns) |
| timeout = (slot->clock * ns) / NSEC_PER_SEC; |
| else |
| timeout = (slot->clock * 850ull) / 1000ull; |
| writeq(timeout, slot->host->base + MIO_EMM_WDOG(slot->host)); |
| } |
| |
| static void cvm_mmc_reset_bus(struct cvm_mmc_slot *slot) |
| { |
| struct cvm_mmc_host *host = slot->host; |
| u64 emm_switch, wdog; |
| |
| emm_switch = readq(slot->host->base + MIO_EMM_SWITCH(host)); |
| emm_switch &= ~(MIO_EMM_SWITCH_EXE | MIO_EMM_SWITCH_ERR0 | |
| MIO_EMM_SWITCH_ERR1 | MIO_EMM_SWITCH_ERR2); |
| set_bus_id(&emm_switch, slot->bus_id); |
| |
| wdog = readq(slot->host->base + MIO_EMM_WDOG(host)); |
| do_switch(slot->host, emm_switch); |
| |
| slot->cached_switch = emm_switch; |
| |
| msleep(20); |
| |
| writeq(wdog, slot->host->base + MIO_EMM_WDOG(host)); |
| } |
| |
| /* Switch to another slot if needed */ |
| static void cvm_mmc_switch_to(struct cvm_mmc_slot *slot) |
| { |
| struct cvm_mmc_host *host = slot->host; |
| struct cvm_mmc_slot *old_slot; |
| u64 emm_sample, emm_switch; |
| |
| if (slot->bus_id == host->last_slot) |
| return; |
| |
| if (host->last_slot >= 0 && host->slot[host->last_slot]) { |
| old_slot = host->slot[host->last_slot]; |
| old_slot->cached_switch = readq(host->base + MIO_EMM_SWITCH(host)); |
| old_slot->cached_rca = readq(host->base + MIO_EMM_RCA(host)); |
| } |
| |
| writeq(slot->cached_rca, host->base + MIO_EMM_RCA(host)); |
| emm_switch = slot->cached_switch; |
| set_bus_id(&emm_switch, slot->bus_id); |
| do_switch(host, emm_switch); |
| |
| emm_sample = FIELD_PREP(MIO_EMM_SAMPLE_CMD_CNT, slot->cmd_cnt) | |
| FIELD_PREP(MIO_EMM_SAMPLE_DAT_CNT, slot->dat_cnt); |
| writeq(emm_sample, host->base + MIO_EMM_SAMPLE(host)); |
| |
| host->last_slot = slot->bus_id; |
| } |
| |
| static void do_read(struct cvm_mmc_host *host, struct mmc_request *req, |
| u64 dbuf) |
| { |
| struct sg_mapping_iter *smi = &host->smi; |
| int data_len = req->data->blocks * req->data->blksz; |
| int bytes_xfered, shift = -1; |
| u64 dat = 0; |
| |
| /* Auto inc from offset zero */ |
| writeq((0x10000 | (dbuf << 6)), host->base + MIO_EMM_BUF_IDX(host)); |
| |
| for (bytes_xfered = 0; bytes_xfered < data_len;) { |
| if (smi->consumed >= smi->length) { |
| if (!sg_miter_next(smi)) |
| break; |
| smi->consumed = 0; |
| } |
| |
| if (shift < 0) { |
| dat = readq(host->base + MIO_EMM_BUF_DAT(host)); |
| shift = 56; |
| } |
| |
| while (smi->consumed < smi->length && shift >= 0) { |
| ((u8 *)smi->addr)[smi->consumed] = (dat >> shift) & 0xff; |
| bytes_xfered++; |
| smi->consumed++; |
| shift -= 8; |
| } |
| } |
| |
| sg_miter_stop(smi); |
| req->data->bytes_xfered = bytes_xfered; |
| req->data->error = 0; |
| } |
| |
| static void do_write(struct mmc_request *req) |
| { |
| req->data->bytes_xfered = req->data->blocks * req->data->blksz; |
| req->data->error = 0; |
| } |
| |
| static void set_cmd_response(struct cvm_mmc_host *host, struct mmc_request *req, |
| u64 rsp_sts) |
| { |
| u64 rsp_hi, rsp_lo; |
| |
| if (!(rsp_sts & MIO_EMM_RSP_STS_RSP_VAL)) |
| return; |
| |
| rsp_lo = readq(host->base + MIO_EMM_RSP_LO(host)); |
| |
| switch (FIELD_GET(MIO_EMM_RSP_STS_RSP_TYPE, rsp_sts)) { |
| case 1: |
| case 3: |
| req->cmd->resp[0] = (rsp_lo >> 8) & 0xffffffff; |
| req->cmd->resp[1] = 0; |
| req->cmd->resp[2] = 0; |
| req->cmd->resp[3] = 0; |
| break; |
| case 2: |
| req->cmd->resp[3] = rsp_lo & 0xffffffff; |
| req->cmd->resp[2] = (rsp_lo >> 32) & 0xffffffff; |
| rsp_hi = readq(host->base + MIO_EMM_RSP_HI(host)); |
| req->cmd->resp[1] = rsp_hi & 0xffffffff; |
| req->cmd->resp[0] = (rsp_hi >> 32) & 0xffffffff; |
| break; |
| } |
| } |
| |
| static int get_dma_dir(struct mmc_data *data) |
| { |
| return (data->flags & MMC_DATA_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; |
| } |
| |
| static int finish_dma_single(struct cvm_mmc_host *host, struct mmc_data *data) |
| { |
| data->bytes_xfered = data->blocks * data->blksz; |
| data->error = 0; |
| dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data)); |
| return 1; |
| } |
| |
| static int finish_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data) |
| { |
| u64 fifo_cfg; |
| int count; |
| |
| /* Check if there are any pending requests left */ |
| fifo_cfg = readq(host->dma_base + MIO_EMM_DMA_FIFO_CFG(host)); |
| count = FIELD_GET(MIO_EMM_DMA_FIFO_CFG_COUNT, fifo_cfg); |
| if (count) |
| dev_err(host->dev, "%u requests still pending\n", count); |
| |
| data->bytes_xfered = data->blocks * data->blksz; |
| data->error = 0; |
| |
| /* Clear and disable FIFO */ |
| writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host)); |
| dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data)); |
| return 1; |
| } |
| |
| static int finish_dma(struct cvm_mmc_host *host, struct mmc_data *data) |
| { |
| if (host->use_sg && data->sg_len > 1) |
| return finish_dma_sg(host, data); |
| else |
| return finish_dma_single(host, data); |
| } |
| |
| static int check_status(u64 rsp_sts) |
| { |
| if (rsp_sts & MIO_EMM_RSP_STS_RSP_BAD_STS || |
| rsp_sts & MIO_EMM_RSP_STS_RSP_CRC_ERR || |
| rsp_sts & MIO_EMM_RSP_STS_BLK_CRC_ERR) |
| return -EILSEQ; |
| if (rsp_sts & MIO_EMM_RSP_STS_RSP_TIMEOUT || |
| rsp_sts & MIO_EMM_RSP_STS_BLK_TIMEOUT) |
| return -ETIMEDOUT; |
| if (rsp_sts & MIO_EMM_RSP_STS_DBUF_ERR) |
| return -EIO; |
| return 0; |
| } |
| |
| /* Try to clean up failed DMA. */ |
| static void cleanup_dma(struct cvm_mmc_host *host, u64 rsp_sts) |
| { |
| u64 emm_dma; |
| |
| emm_dma = readq(host->base + MIO_EMM_DMA(host)); |
| emm_dma |= FIELD_PREP(MIO_EMM_DMA_VAL, 1) | |
| FIELD_PREP(MIO_EMM_DMA_DAT_NULL, 1); |
| set_bus_id(&emm_dma, get_bus_id(rsp_sts)); |
| writeq(emm_dma, host->base + MIO_EMM_DMA(host)); |
| } |
| |
| irqreturn_t cvm_mmc_interrupt(int irq, void *dev_id) |
| { |
| struct cvm_mmc_host *host = dev_id; |
| struct mmc_request *req; |
| unsigned long flags = 0; |
| u64 emm_int, rsp_sts; |
| bool host_done; |
| |
| if (host->need_irq_handler_lock) |
| spin_lock_irqsave(&host->irq_handler_lock, flags); |
| else |
| __acquire(&host->irq_handler_lock); |
| |
| /* Clear interrupt bits (write 1 clears ). */ |
| emm_int = readq(host->base + MIO_EMM_INT(host)); |
| writeq(emm_int, host->base + MIO_EMM_INT(host)); |
| |
| if (emm_int & MIO_EMM_INT_SWITCH_ERR) |
| check_switch_errors(host); |
| |
| req = host->current_req; |
| if (!req) |
| goto out; |
| |
| rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host)); |
| /* |
| * dma_val set means DMA is still in progress. Don't touch |
| * the request and wait for the interrupt indicating that |
| * the DMA is finished. |
| */ |
| if ((rsp_sts & MIO_EMM_RSP_STS_DMA_VAL) && host->dma_active) |
| goto out; |
| |
| if (!host->dma_active && req->data && |
| (emm_int & MIO_EMM_INT_BUF_DONE)) { |
| unsigned int type = (rsp_sts >> 7) & 3; |
| |
| if (type == 1) |
| do_read(host, req, rsp_sts & MIO_EMM_RSP_STS_DBUF); |
| else if (type == 2) |
| do_write(req); |
| } |
| |
| host_done = emm_int & MIO_EMM_INT_CMD_DONE || |
| emm_int & MIO_EMM_INT_DMA_DONE || |
| emm_int & MIO_EMM_INT_CMD_ERR || |
| emm_int & MIO_EMM_INT_DMA_ERR; |
| |
| if (!(host_done && req->done)) |
| goto no_req_done; |
| |
| req->cmd->error = check_status(rsp_sts); |
| |
| if (host->dma_active && req->data) |
| if (!finish_dma(host, req->data)) |
| goto no_req_done; |
| |
| set_cmd_response(host, req, rsp_sts); |
| if ((emm_int & MIO_EMM_INT_DMA_ERR) && |
| (rsp_sts & MIO_EMM_RSP_STS_DMA_PEND)) |
| cleanup_dma(host, rsp_sts); |
| |
| host->current_req = NULL; |
| req->done(req); |
| |
| no_req_done: |
| if (host->dmar_fixup_done) |
| host->dmar_fixup_done(host); |
| if (host_done) |
| host->release_bus(host); |
| out: |
| if (host->need_irq_handler_lock) |
| spin_unlock_irqrestore(&host->irq_handler_lock, flags); |
| else |
| __release(&host->irq_handler_lock); |
| return IRQ_RETVAL(emm_int != 0); |
| } |
| |
| /* |
| * Program DMA_CFG and if needed DMA_ADR. |
| * Returns 0 on error, DMA address otherwise. |
| */ |
| static u64 prepare_dma_single(struct cvm_mmc_host *host, struct mmc_data *data) |
| { |
| u64 dma_cfg, addr; |
| int count, rw; |
| |
| count = dma_map_sg(host->dev, data->sg, data->sg_len, |
| get_dma_dir(data)); |
| if (!count) |
| return 0; |
| |
| rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; |
| dma_cfg = FIELD_PREP(MIO_EMM_DMA_CFG_EN, 1) | |
| FIELD_PREP(MIO_EMM_DMA_CFG_RW, rw); |
| #ifdef __LITTLE_ENDIAN |
| dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ENDIAN, 1); |
| #endif |
| dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_SIZE, |
| (sg_dma_len(&data->sg[0]) / 8) - 1); |
| |
| addr = sg_dma_address(&data->sg[0]); |
| if (!host->big_dma_addr) |
| dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ADR, addr); |
| writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host)); |
| |
| pr_debug("[%s] sg_dma_len: %u total sg_elem: %d\n", |
| (rw) ? "W" : "R", sg_dma_len(&data->sg[0]), count); |
| |
| if (host->big_dma_addr) |
| writeq(addr, host->dma_base + MIO_EMM_DMA_ADR(host)); |
| return addr; |
| } |
| |
| /* |
| * Queue complete sg list into the FIFO. |
| * Returns 0 on error, 1 otherwise. |
| */ |
| static u64 prepare_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data) |
| { |
| struct scatterlist *sg; |
| u64 fifo_cmd, addr; |
| int count, i, rw; |
| |
| count = dma_map_sg(host->dev, data->sg, data->sg_len, |
| get_dma_dir(data)); |
| if (!count) |
| return 0; |
| if (count > 16) |
| goto error; |
| |
| /* Enable FIFO by removing CLR bit */ |
| writeq(0, host->dma_base + MIO_EMM_DMA_FIFO_CFG(host)); |
| |
| for_each_sg(data->sg, sg, count, i) { |
| /* Program DMA address */ |
| addr = sg_dma_address(sg); |
| if (addr & 7) |
| goto error; |
| writeq(addr, host->dma_base + MIO_EMM_DMA_FIFO_ADR(host)); |
| |
| /* |
| * If we have scatter-gather support we also have an extra |
| * register for the DMA addr, so no need to check |
| * host->big_dma_addr here. |
| */ |
| rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; |
| fifo_cmd = FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_RW, rw); |
| |
| /* enable interrupts on the last element */ |
| fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_INTDIS, |
| (i + 1 == count) ? 0 : 1); |
| |
| #ifdef __LITTLE_ENDIAN |
| fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_ENDIAN, 1); |
| #endif |
| fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_SIZE, |
| sg_dma_len(sg) / 8 - 1); |
| /* |
| * The write copies the address and the command to the FIFO |
| * and increments the FIFO's COUNT field. |
| */ |
| writeq(fifo_cmd, host->dma_base + MIO_EMM_DMA_FIFO_CMD(host)); |
| pr_debug("[%s] sg_dma_len: %u sg_elem: %d/%d\n", |
| (rw) ? "W" : "R", sg_dma_len(sg), i, count); |
| } |
| |
| /* |
| * In difference to prepare_dma_single we don't return the |
| * address here, as it would not make sense for scatter-gather. |
| * The dma fixup is only required on models that don't support |
| * scatter-gather, so that is not a problem. |
| */ |
| return 1; |
| |
| error: |
| WARN_ON_ONCE(1); |
| dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data)); |
| /* Disable FIFO */ |
| writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host)); |
| return 0; |
| } |
| |
| static u64 prepare_dma(struct cvm_mmc_host *host, struct mmc_data *data) |
| { |
| if (host->use_sg && data->sg_len > 1) |
| return prepare_dma_sg(host, data); |
| else |
| return prepare_dma_single(host, data); |
| } |
| |
| static u64 prepare_ext_dma(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct cvm_mmc_slot *slot = mmc_priv(mmc); |
| u64 emm_dma; |
| |
| emm_dma = FIELD_PREP(MIO_EMM_DMA_VAL, 1) | |
| FIELD_PREP(MIO_EMM_DMA_SECTOR, |
| mmc_card_is_blockaddr(mmc->card) ? 1 : 0) | |
| FIELD_PREP(MIO_EMM_DMA_RW, |
| (mrq->data->flags & MMC_DATA_WRITE) ? 1 : 0) | |
| FIELD_PREP(MIO_EMM_DMA_BLOCK_CNT, mrq->data->blocks) | |
| FIELD_PREP(MIO_EMM_DMA_CARD_ADDR, mrq->cmd->arg); |
| set_bus_id(&emm_dma, slot->bus_id); |
| |
| if (mmc_card_mmc(mmc->card) || (mmc_card_sd(mmc->card) && |
| (mmc->card->scr.cmds & SD_SCR_CMD23_SUPPORT))) |
| emm_dma |= FIELD_PREP(MIO_EMM_DMA_MULTI, 1); |
| |
| pr_debug("[%s] blocks: %u multi: %d\n", |
| (emm_dma & MIO_EMM_DMA_RW) ? "W" : "R", |
| mrq->data->blocks, (emm_dma & MIO_EMM_DMA_MULTI) ? 1 : 0); |
| return emm_dma; |
| } |
| |
| static void cvm_mmc_dma_request(struct mmc_host *mmc, |
| struct mmc_request *mrq) |
| { |
| struct cvm_mmc_slot *slot = mmc_priv(mmc); |
| struct cvm_mmc_host *host = slot->host; |
| struct mmc_data *data; |
| u64 emm_dma, addr; |
| |
| if (!mrq->data || !mrq->data->sg || !mrq->data->sg_len || |
| !mrq->stop || mrq->stop->opcode != MMC_STOP_TRANSMISSION) { |
| dev_err(&mmc->card->dev, |
| "Error: cmv_mmc_dma_request no data\n"); |
| goto error; |
| } |
| |
| cvm_mmc_switch_to(slot); |
| |
| data = mrq->data; |
| pr_debug("DMA request blocks: %d block_size: %d total_size: %d\n", |
| data->blocks, data->blksz, data->blocks * data->blksz); |
| if (data->timeout_ns) |
| set_wdog(slot, data->timeout_ns); |
| |
| WARN_ON(host->current_req); |
| host->current_req = mrq; |
| |
| emm_dma = prepare_ext_dma(mmc, mrq); |
| addr = prepare_dma(host, data); |
| if (!addr) { |
| dev_err(host->dev, "prepare_dma failed\n"); |
| goto error; |
| } |
| |
| host->dma_active = true; |
| host->int_enable(host, MIO_EMM_INT_CMD_ERR | MIO_EMM_INT_DMA_DONE | |
| MIO_EMM_INT_DMA_ERR); |
| |
| if (host->dmar_fixup) |
| host->dmar_fixup(host, mrq->cmd, data, addr); |
| |
| /* |
| * If we have a valid SD card in the slot, we set the response |
| * bit mask to check for CRC errors and timeouts only. |
| * Otherwise, use the default power reset value. |
| */ |
| if (mmc_card_sd(mmc->card)) |
| writeq(0x00b00000ull, host->base + MIO_EMM_STS_MASK(host)); |
| else |
| writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host)); |
| writeq(emm_dma, host->base + MIO_EMM_DMA(host)); |
| return; |
| |
| error: |
| mrq->cmd->error = -EINVAL; |
| if (mrq->done) |
| mrq->done(mrq); |
| host->release_bus(host); |
| } |
| |
| static void do_read_request(struct cvm_mmc_host *host, struct mmc_request *mrq) |
| { |
| sg_miter_start(&host->smi, mrq->data->sg, mrq->data->sg_len, |
| SG_MITER_ATOMIC | SG_MITER_TO_SG); |
| } |
| |
| static void do_write_request(struct cvm_mmc_host *host, struct mmc_request *mrq) |
| { |
| unsigned int data_len = mrq->data->blocks * mrq->data->blksz; |
| struct sg_mapping_iter *smi = &host->smi; |
| unsigned int bytes_xfered; |
| int shift = 56; |
| u64 dat = 0; |
| |
| /* Copy data to the xmit buffer before issuing the command. */ |
| sg_miter_start(smi, mrq->data->sg, mrq->data->sg_len, SG_MITER_FROM_SG); |
| |
| /* Auto inc from offset zero, dbuf zero */ |
| writeq(0x10000ull, host->base + MIO_EMM_BUF_IDX(host)); |
| |
| for (bytes_xfered = 0; bytes_xfered < data_len;) { |
| if (smi->consumed >= smi->length) { |
| if (!sg_miter_next(smi)) |
| break; |
| smi->consumed = 0; |
| } |
| |
| while (smi->consumed < smi->length && shift >= 0) { |
| dat |= (u64)((u8 *)smi->addr)[smi->consumed] << shift; |
| bytes_xfered++; |
| smi->consumed++; |
| shift -= 8; |
| } |
| |
| if (shift < 0) { |
| writeq(dat, host->base + MIO_EMM_BUF_DAT(host)); |
| shift = 56; |
| dat = 0; |
| } |
| } |
| sg_miter_stop(smi); |
| } |
| |
| static void cvm_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct cvm_mmc_slot *slot = mmc_priv(mmc); |
| struct cvm_mmc_host *host = slot->host; |
| struct mmc_command *cmd = mrq->cmd; |
| struct cvm_mmc_cr_mods mods; |
| u64 emm_cmd, rsp_sts; |
| int retries = 100; |
| |
| /* |
| * Note about locking: |
| * All MMC devices share the same bus and controller. Allow only a |
| * single user of the bootbus/MMC bus at a time. The lock is acquired |
| * on all entry points from the MMC layer. |
| * |
| * For requests the lock is only released after the completion |
| * interrupt! |
| */ |
| host->acquire_bus(host); |
| |
| if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK || |
| cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) |
| return cvm_mmc_dma_request(mmc, mrq); |
| |
| cvm_mmc_switch_to(slot); |
| |
| mods = cvm_mmc_get_cr_mods(cmd); |
| |
| WARN_ON(host->current_req); |
| host->current_req = mrq; |
| |
| if (cmd->data) { |
| if (cmd->data->flags & MMC_DATA_READ) |
| do_read_request(host, mrq); |
| else |
| do_write_request(host, mrq); |
| |
| if (cmd->data->timeout_ns) |
| set_wdog(slot, cmd->data->timeout_ns); |
| } else |
| set_wdog(slot, 0); |
| |
| host->dma_active = false; |
| host->int_enable(host, MIO_EMM_INT_CMD_DONE | MIO_EMM_INT_CMD_ERR); |
| |
| emm_cmd = FIELD_PREP(MIO_EMM_CMD_VAL, 1) | |
| FIELD_PREP(MIO_EMM_CMD_CTYPE_XOR, mods.ctype_xor) | |
| FIELD_PREP(MIO_EMM_CMD_RTYPE_XOR, mods.rtype_xor) | |
| FIELD_PREP(MIO_EMM_CMD_IDX, cmd->opcode) | |
| FIELD_PREP(MIO_EMM_CMD_ARG, cmd->arg); |
| set_bus_id(&emm_cmd, slot->bus_id); |
| if (cmd->data && mmc_cmd_type(cmd) == MMC_CMD_ADTC) |
| emm_cmd |= FIELD_PREP(MIO_EMM_CMD_OFFSET, |
| 64 - ((cmd->data->blocks * cmd->data->blksz) / 8)); |
| |
| writeq(0, host->base + MIO_EMM_STS_MASK(host)); |
| |
| retry: |
| rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host)); |
| if (rsp_sts & MIO_EMM_RSP_STS_DMA_VAL || |
| rsp_sts & MIO_EMM_RSP_STS_CMD_VAL || |
| rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL || |
| rsp_sts & MIO_EMM_RSP_STS_DMA_PEND) { |
| udelay(10); |
| if (--retries) |
| goto retry; |
| } |
| if (!retries) |
| dev_err(host->dev, "Bad status: %llx before command write\n", rsp_sts); |
| writeq(emm_cmd, host->base + MIO_EMM_CMD(host)); |
| } |
| |
| static void cvm_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct cvm_mmc_slot *slot = mmc_priv(mmc); |
| struct cvm_mmc_host *host = slot->host; |
| int clk_period = 0, power_class = 10, bus_width = 0; |
| u64 clock, emm_switch; |
| |
| host->acquire_bus(host); |
| cvm_mmc_switch_to(slot); |
| |
| /* Set the power state */ |
| switch (ios->power_mode) { |
| case MMC_POWER_ON: |
| break; |
| |
| case MMC_POWER_OFF: |
| cvm_mmc_reset_bus(slot); |
| if (host->global_pwr_gpiod) |
| host->set_shared_power(host, 0); |
| else if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); |
| break; |
| |
| case MMC_POWER_UP: |
| if (host->global_pwr_gpiod) |
| host->set_shared_power(host, 1); |
| else if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); |
| break; |
| } |
| |
| /* Convert bus width to HW definition */ |
| switch (ios->bus_width) { |
| case MMC_BUS_WIDTH_8: |
| bus_width = 2; |
| break; |
| case MMC_BUS_WIDTH_4: |
| bus_width = 1; |
| break; |
| case MMC_BUS_WIDTH_1: |
| bus_width = 0; |
| break; |
| } |
| |
| /* DDR is available for 4/8 bit bus width */ |
| if (ios->bus_width && ios->timing == MMC_TIMING_MMC_DDR52) |
| bus_width |= 4; |
| |
| /* Change the clock frequency. */ |
| clock = ios->clock; |
| if (clock > 52000000) |
| clock = 52000000; |
| slot->clock = clock; |
| |
| if (clock) |
| clk_period = (host->sys_freq + clock - 1) / (2 * clock); |
| |
| emm_switch = FIELD_PREP(MIO_EMM_SWITCH_HS_TIMING, |
| (ios->timing == MMC_TIMING_MMC_HS)) | |
| FIELD_PREP(MIO_EMM_SWITCH_BUS_WIDTH, bus_width) | |
| FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, power_class) | |
| FIELD_PREP(MIO_EMM_SWITCH_CLK_HI, clk_period) | |
| FIELD_PREP(MIO_EMM_SWITCH_CLK_LO, clk_period); |
| set_bus_id(&emm_switch, slot->bus_id); |
| |
| if (!switch_val_changed(slot, emm_switch)) |
| goto out; |
| |
| set_wdog(slot, 0); |
| do_switch(host, emm_switch); |
| slot->cached_switch = emm_switch; |
| out: |
| host->release_bus(host); |
| } |
| |
| static const struct mmc_host_ops cvm_mmc_ops = { |
| .request = cvm_mmc_request, |
| .set_ios = cvm_mmc_set_ios, |
| .get_ro = mmc_gpio_get_ro, |
| .get_cd = mmc_gpio_get_cd, |
| }; |
| |
| static void cvm_mmc_set_clock(struct cvm_mmc_slot *slot, unsigned int clock) |
| { |
| struct mmc_host *mmc = slot->mmc; |
| |
| clock = min(clock, mmc->f_max); |
| clock = max(clock, mmc->f_min); |
| slot->clock = clock; |
| } |
| |
| static int cvm_mmc_init_lowlevel(struct cvm_mmc_slot *slot) |
| { |
| struct cvm_mmc_host *host = slot->host; |
| u64 emm_switch; |
| |
| /* Enable this bus slot. */ |
| host->emm_cfg |= (1ull << slot->bus_id); |
| writeq(host->emm_cfg, slot->host->base + MIO_EMM_CFG(host)); |
| udelay(10); |
| |
| /* Program initial clock speed and power. */ |
| cvm_mmc_set_clock(slot, slot->mmc->f_min); |
| emm_switch = FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, 10); |
| emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_HI, |
| (host->sys_freq / slot->clock) / 2); |
| emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_LO, |
| (host->sys_freq / slot->clock) / 2); |
| |
| /* Make the changes take effect on this bus slot. */ |
| set_bus_id(&emm_switch, slot->bus_id); |
| do_switch(host, emm_switch); |
| |
| slot->cached_switch = emm_switch; |
| |
| /* |
| * Set watchdog timeout value and default reset value |
| * for the mask register. Finally, set the CARD_RCA |
| * bit so that we can get the card address relative |
| * to the CMD register for CMD7 transactions. |
| */ |
| set_wdog(slot, 0); |
| writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host)); |
| writeq(1, host->base + MIO_EMM_RCA(host)); |
| return 0; |
| } |
| |
| static int cvm_mmc_of_parse(struct device *dev, struct cvm_mmc_slot *slot) |
| { |
| u32 id, cmd_skew = 0, dat_skew = 0, bus_width = 0; |
| struct device_node *node = dev->of_node; |
| struct mmc_host *mmc = slot->mmc; |
| u64 clock_period; |
| int ret; |
| |
| ret = of_property_read_u32(node, "reg", &id); |
| if (ret) { |
| dev_err(dev, "Missing or invalid reg property on %pOF\n", node); |
| return ret; |
| } |
| |
| if (id >= CAVIUM_MAX_MMC || slot->host->slot[id]) { |
| dev_err(dev, "Invalid reg property on %pOF\n", node); |
| return -EINVAL; |
| } |
| |
| ret = mmc_regulator_get_supply(mmc); |
| if (ret == -EPROBE_DEFER) |
| return ret; |
| /* |
| * Legacy Octeon firmware has no regulator entry, fall-back to |
| * a hard-coded voltage to get a sane OCR. |
| */ |
| if (IS_ERR(mmc->supply.vmmc)) |
| mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; |
| |
| /* Common MMC bindings */ |
| ret = mmc_of_parse(mmc); |
| if (ret) |
| return ret; |
| |
| /* Set bus width */ |
| if (!(mmc->caps & (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA))) { |
| of_property_read_u32(node, "cavium,bus-max-width", &bus_width); |
| if (bus_width == 8) |
| mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA; |
| else if (bus_width == 4) |
| mmc->caps |= MMC_CAP_4_BIT_DATA; |
| } |
| |
| /* Set maximum and minimum frequency */ |
| if (!mmc->f_max) |
| of_property_read_u32(node, "spi-max-frequency", &mmc->f_max); |
| if (!mmc->f_max || mmc->f_max > 52000000) |
| mmc->f_max = 52000000; |
| mmc->f_min = 400000; |
| |
| /* Sampling register settings, period in picoseconds */ |
| clock_period = 1000000000000ull / slot->host->sys_freq; |
| of_property_read_u32(node, "cavium,cmd-clk-skew", &cmd_skew); |
| of_property_read_u32(node, "cavium,dat-clk-skew", &dat_skew); |
| slot->cmd_cnt = (cmd_skew + clock_period / 2) / clock_period; |
| slot->dat_cnt = (dat_skew + clock_period / 2) / clock_period; |
| |
| return id; |
| } |
| |
| int cvm_mmc_of_slot_probe(struct device *dev, struct cvm_mmc_host *host) |
| { |
| struct cvm_mmc_slot *slot; |
| struct mmc_host *mmc; |
| int ret, id; |
| |
| mmc = mmc_alloc_host(sizeof(struct cvm_mmc_slot), dev); |
| if (!mmc) |
| return -ENOMEM; |
| |
| slot = mmc_priv(mmc); |
| slot->mmc = mmc; |
| slot->host = host; |
| |
| ret = cvm_mmc_of_parse(dev, slot); |
| if (ret < 0) |
| goto error; |
| id = ret; |
| |
| /* Set up host parameters */ |
| mmc->ops = &cvm_mmc_ops; |
| |
| /* |
| * We only have a 3.3v supply, we cannot support any |
| * of the UHS modes. We do support the high speed DDR |
| * modes up to 52MHz. |
| * |
| * Disable bounce buffers for max_segs = 1 |
| */ |
| mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | |
| MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_POWER_OFF_CARD | |
| MMC_CAP_3_3V_DDR; |
| |
| if (host->use_sg) |
| mmc->max_segs = 16; |
| else |
| mmc->max_segs = 1; |
| |
| /* DMA size field can address up to 8 MB */ |
| mmc->max_seg_size = min_t(unsigned int, 8 * 1024 * 1024, |
| dma_get_max_seg_size(host->dev)); |
| mmc->max_req_size = mmc->max_seg_size; |
| /* External DMA is in 512 byte blocks */ |
| mmc->max_blk_size = 512; |
| /* DMA block count field is 15 bits */ |
| mmc->max_blk_count = 32767; |
| |
| slot->clock = mmc->f_min; |
| slot->bus_id = id; |
| slot->cached_rca = 1; |
| |
| host->acquire_bus(host); |
| host->slot[id] = slot; |
| cvm_mmc_switch_to(slot); |
| cvm_mmc_init_lowlevel(slot); |
| host->release_bus(host); |
| |
| ret = mmc_add_host(mmc); |
| if (ret) { |
| dev_err(dev, "mmc_add_host() returned %d\n", ret); |
| slot->host->slot[id] = NULL; |
| goto error; |
| } |
| return 0; |
| |
| error: |
| mmc_free_host(slot->mmc); |
| return ret; |
| } |
| |
| int cvm_mmc_of_slot_remove(struct cvm_mmc_slot *slot) |
| { |
| mmc_remove_host(slot->mmc); |
| slot->host->slot[slot->bus_id] = NULL; |
| mmc_free_host(slot->mmc); |
| return 0; |
| } |