| /* |
| * Copyright 2017 Google Inc |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Provides a simple driver to control the ASPEED LPC snoop interface which |
| * allows the BMC to listen on and save the data written by |
| * the host to an arbitrary LPC I/O port. |
| * |
| * Typically used by the BMC to "watch" host boot progress via port |
| * 0x80 writes made by the BIOS during the boot process. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/interrupt.h> |
| #include <linux/kfifo.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #define DEVICE_NAME "aspeed-lpc-snoop" |
| |
| #define NUM_SNOOP_CHANNELS 2 |
| #define SNOOP_FIFO_SIZE 2048 |
| |
| #define HICR5 0x0 |
| #define HICR5_EN_SNP0W BIT(0) |
| #define HICR5_ENINT_SNP0W BIT(1) |
| #define HICR5_EN_SNP1W BIT(2) |
| #define HICR5_ENINT_SNP1W BIT(3) |
| |
| #define HICR6 0x4 |
| #define HICR6_STR_SNP0W BIT(0) |
| #define HICR6_STR_SNP1W BIT(1) |
| #define SNPWADR 0x10 |
| #define SNPWADR_CH0_MASK GENMASK(15, 0) |
| #define SNPWADR_CH0_SHIFT 0 |
| #define SNPWADR_CH1_MASK GENMASK(31, 16) |
| #define SNPWADR_CH1_SHIFT 16 |
| #define SNPWDR 0x14 |
| #define SNPWDR_CH0_MASK GENMASK(7, 0) |
| #define SNPWDR_CH0_SHIFT 0 |
| #define SNPWDR_CH1_MASK GENMASK(15, 8) |
| #define SNPWDR_CH1_SHIFT 8 |
| #define HICRB 0x80 |
| #define HICRB_ENSNP0D BIT(14) |
| #define HICRB_ENSNP1D BIT(15) |
| |
| struct aspeed_lpc_snoop_model_data { |
| /* The ast2400 has bits 14 and 15 as reserved, whereas the ast2500 |
| * can use them. |
| */ |
| unsigned int has_hicrb_ensnp; |
| }; |
| |
| struct aspeed_lpc_snoop { |
| struct regmap *regmap; |
| int irq; |
| struct kfifo snoop_fifo[NUM_SNOOP_CHANNELS]; |
| }; |
| |
| /* Save a byte to a FIFO and discard the oldest byte if FIFO is full */ |
| static void put_fifo_with_discard(struct kfifo *fifo, u8 val) |
| { |
| if (!kfifo_initialized(fifo)) |
| return; |
| if (kfifo_is_full(fifo)) |
| kfifo_skip(fifo); |
| kfifo_put(fifo, val); |
| } |
| |
| static irqreturn_t aspeed_lpc_snoop_irq(int irq, void *arg) |
| { |
| struct aspeed_lpc_snoop *lpc_snoop = arg; |
| u32 reg, data; |
| |
| if (regmap_read(lpc_snoop->regmap, HICR6, ®)) |
| return IRQ_NONE; |
| |
| /* Check if one of the snoop channels is interrupting */ |
| reg &= (HICR6_STR_SNP0W | HICR6_STR_SNP1W); |
| if (!reg) |
| return IRQ_NONE; |
| |
| /* Ack pending IRQs */ |
| regmap_write(lpc_snoop->regmap, HICR6, reg); |
| |
| /* Read and save most recent snoop'ed data byte to FIFO */ |
| regmap_read(lpc_snoop->regmap, SNPWDR, &data); |
| |
| if (reg & HICR6_STR_SNP0W) { |
| u8 val = (data & SNPWDR_CH0_MASK) >> SNPWDR_CH0_SHIFT; |
| |
| put_fifo_with_discard(&lpc_snoop->snoop_fifo[0], val); |
| } |
| if (reg & HICR6_STR_SNP1W) { |
| u8 val = (data & SNPWDR_CH1_MASK) >> SNPWDR_CH1_SHIFT; |
| |
| put_fifo_with_discard(&lpc_snoop->snoop_fifo[1], val); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int aspeed_lpc_snoop_config_irq(struct aspeed_lpc_snoop *lpc_snoop, |
| struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| int rc; |
| |
| lpc_snoop->irq = platform_get_irq(pdev, 0); |
| if (!lpc_snoop->irq) |
| return -ENODEV; |
| |
| rc = devm_request_irq(dev, lpc_snoop->irq, |
| aspeed_lpc_snoop_irq, IRQF_SHARED, |
| DEVICE_NAME, lpc_snoop); |
| if (rc < 0) { |
| dev_warn(dev, "Unable to request IRQ %d\n", lpc_snoop->irq); |
| lpc_snoop->irq = 0; |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop, |
| struct device *dev, |
| int channel, u16 lpc_port) |
| { |
| int rc = 0; |
| u32 hicr5_en, snpwadr_mask, snpwadr_shift, hicrb_en; |
| const struct aspeed_lpc_snoop_model_data *model_data = |
| of_device_get_match_data(dev); |
| |
| /* Create FIFO datastructure */ |
| rc = kfifo_alloc(&lpc_snoop->snoop_fifo[channel], |
| SNOOP_FIFO_SIZE, GFP_KERNEL); |
| if (rc) |
| return rc; |
| |
| /* Enable LPC snoop channel at requested port */ |
| switch (channel) { |
| case 0: |
| hicr5_en = HICR5_EN_SNP0W | HICR5_ENINT_SNP0W; |
| snpwadr_mask = SNPWADR_CH0_MASK; |
| snpwadr_shift = SNPWADR_CH0_SHIFT; |
| hicrb_en = HICRB_ENSNP0D; |
| break; |
| case 1: |
| hicr5_en = HICR5_EN_SNP1W | HICR5_ENINT_SNP1W; |
| snpwadr_mask = SNPWADR_CH1_MASK; |
| snpwadr_shift = SNPWADR_CH1_SHIFT; |
| hicrb_en = HICRB_ENSNP1D; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en); |
| regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask, |
| lpc_port << snpwadr_shift); |
| if (model_data->has_hicrb_ensnp) |
| regmap_update_bits(lpc_snoop->regmap, HICRB, |
| hicrb_en, hicrb_en); |
| |
| return rc; |
| } |
| |
| static void aspeed_lpc_disable_snoop(struct aspeed_lpc_snoop *lpc_snoop, |
| int channel) |
| { |
| switch (channel) { |
| case 0: |
| regmap_update_bits(lpc_snoop->regmap, HICR5, |
| HICR5_EN_SNP0W | HICR5_ENINT_SNP0W, |
| 0); |
| break; |
| case 1: |
| regmap_update_bits(lpc_snoop->regmap, HICR5, |
| HICR5_EN_SNP1W | HICR5_ENINT_SNP1W, |
| 0); |
| break; |
| default: |
| return; |
| } |
| |
| kfifo_free(&lpc_snoop->snoop_fifo[channel]); |
| } |
| |
| static int aspeed_lpc_snoop_probe(struct platform_device *pdev) |
| { |
| struct aspeed_lpc_snoop *lpc_snoop; |
| struct device *dev; |
| u32 port; |
| int rc; |
| |
| dev = &pdev->dev; |
| |
| lpc_snoop = devm_kzalloc(dev, sizeof(*lpc_snoop), GFP_KERNEL); |
| if (!lpc_snoop) |
| return -ENOMEM; |
| |
| lpc_snoop->regmap = syscon_node_to_regmap( |
| pdev->dev.parent->of_node); |
| if (IS_ERR(lpc_snoop->regmap)) { |
| dev_err(dev, "Couldn't get regmap\n"); |
| return -ENODEV; |
| } |
| |
| dev_set_drvdata(&pdev->dev, lpc_snoop); |
| |
| rc = of_property_read_u32_index(dev->of_node, "snoop-ports", 0, &port); |
| if (rc) { |
| dev_err(dev, "no snoop ports configured\n"); |
| return -ENODEV; |
| } |
| |
| rc = aspeed_lpc_snoop_config_irq(lpc_snoop, pdev); |
| if (rc) |
| return rc; |
| |
| rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port); |
| if (rc) |
| return rc; |
| |
| /* Configuration of 2nd snoop channel port is optional */ |
| if (of_property_read_u32_index(dev->of_node, "snoop-ports", |
| 1, &port) == 0) { |
| rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port); |
| if (rc) |
| aspeed_lpc_disable_snoop(lpc_snoop, 0); |
| } |
| |
| return rc; |
| } |
| |
| static int aspeed_lpc_snoop_remove(struct platform_device *pdev) |
| { |
| struct aspeed_lpc_snoop *lpc_snoop = dev_get_drvdata(&pdev->dev); |
| |
| /* Disable both snoop channels */ |
| aspeed_lpc_disable_snoop(lpc_snoop, 0); |
| aspeed_lpc_disable_snoop(lpc_snoop, 1); |
| |
| return 0; |
| } |
| |
| static const struct aspeed_lpc_snoop_model_data ast2400_model_data = { |
| .has_hicrb_ensnp = 0, |
| }; |
| |
| static const struct aspeed_lpc_snoop_model_data ast2500_model_data = { |
| .has_hicrb_ensnp = 1, |
| }; |
| |
| static const struct of_device_id aspeed_lpc_snoop_match[] = { |
| { .compatible = "aspeed,ast2400-lpc-snoop", |
| .data = &ast2400_model_data }, |
| { .compatible = "aspeed,ast2500-lpc-snoop", |
| .data = &ast2500_model_data }, |
| { }, |
| }; |
| |
| static struct platform_driver aspeed_lpc_snoop_driver = { |
| .driver = { |
| .name = DEVICE_NAME, |
| .of_match_table = aspeed_lpc_snoop_match, |
| }, |
| .probe = aspeed_lpc_snoop_probe, |
| .remove = aspeed_lpc_snoop_remove, |
| }; |
| |
| module_platform_driver(aspeed_lpc_snoop_driver); |
| |
| MODULE_DEVICE_TABLE(of, aspeed_lpc_snoop_match); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Robert Lippert <rlippert@google.com>"); |
| MODULE_DESCRIPTION("Linux driver to control Aspeed LPC snoop functionality"); |