| /* |
| * TI LP8788 MFD - core interface |
| * |
| * Copyright 2012 Texas Instruments |
| * |
| * Author: Milo(Woogyom) Kim <milo.kim@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/lp8788.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #define MAX_LP8788_REGISTERS 0xA2 |
| |
| #define MFD_DEV_SIMPLE(_name) \ |
| { \ |
| .name = LP8788_DEV_##_name, \ |
| } |
| |
| #define MFD_DEV_WITH_ID(_name, _id) \ |
| { \ |
| .name = LP8788_DEV_##_name, \ |
| .id = _id, \ |
| } |
| |
| #define MFD_DEV_WITH_RESOURCE(_name, _resource, num_resource) \ |
| { \ |
| .name = LP8788_DEV_##_name, \ |
| .resources = _resource, \ |
| .num_resources = num_resource, \ |
| } |
| |
| static struct resource chg_irqs[] = { |
| /* Charger Interrupts */ |
| { |
| .start = LP8788_INT_CHG_INPUT_STATE, |
| .end = LP8788_INT_PRECHG_TIMEOUT, |
| .name = LP8788_CHG_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| /* Power Routing Switch Interrupts */ |
| { |
| .start = LP8788_INT_ENTER_SYS_SUPPORT, |
| .end = LP8788_INT_EXIT_SYS_SUPPORT, |
| .name = LP8788_PRSW_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| /* Battery Interrupts */ |
| { |
| .start = LP8788_INT_BATT_LOW, |
| .end = LP8788_INT_NO_BATT, |
| .name = LP8788_BATT_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource rtc_irqs[] = { |
| { |
| .start = LP8788_INT_RTC_ALARM1, |
| .end = LP8788_INT_RTC_ALARM2, |
| .name = LP8788_ALM_IRQ, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static const struct mfd_cell lp8788_devs[] = { |
| /* 4 bucks */ |
| MFD_DEV_WITH_ID(BUCK, 1), |
| MFD_DEV_WITH_ID(BUCK, 2), |
| MFD_DEV_WITH_ID(BUCK, 3), |
| MFD_DEV_WITH_ID(BUCK, 4), |
| |
| /* 12 digital ldos */ |
| MFD_DEV_WITH_ID(DLDO, 1), |
| MFD_DEV_WITH_ID(DLDO, 2), |
| MFD_DEV_WITH_ID(DLDO, 3), |
| MFD_DEV_WITH_ID(DLDO, 4), |
| MFD_DEV_WITH_ID(DLDO, 5), |
| MFD_DEV_WITH_ID(DLDO, 6), |
| MFD_DEV_WITH_ID(DLDO, 7), |
| MFD_DEV_WITH_ID(DLDO, 8), |
| MFD_DEV_WITH_ID(DLDO, 9), |
| MFD_DEV_WITH_ID(DLDO, 10), |
| MFD_DEV_WITH_ID(DLDO, 11), |
| MFD_DEV_WITH_ID(DLDO, 12), |
| |
| /* 10 analog ldos */ |
| MFD_DEV_WITH_ID(ALDO, 1), |
| MFD_DEV_WITH_ID(ALDO, 2), |
| MFD_DEV_WITH_ID(ALDO, 3), |
| MFD_DEV_WITH_ID(ALDO, 4), |
| MFD_DEV_WITH_ID(ALDO, 5), |
| MFD_DEV_WITH_ID(ALDO, 6), |
| MFD_DEV_WITH_ID(ALDO, 7), |
| MFD_DEV_WITH_ID(ALDO, 8), |
| MFD_DEV_WITH_ID(ALDO, 9), |
| MFD_DEV_WITH_ID(ALDO, 10), |
| |
| /* ADC */ |
| MFD_DEV_SIMPLE(ADC), |
| |
| /* battery charger */ |
| MFD_DEV_WITH_RESOURCE(CHARGER, chg_irqs, ARRAY_SIZE(chg_irqs)), |
| |
| /* rtc */ |
| MFD_DEV_WITH_RESOURCE(RTC, rtc_irqs, ARRAY_SIZE(rtc_irqs)), |
| |
| /* backlight */ |
| MFD_DEV_SIMPLE(BACKLIGHT), |
| |
| /* current sink for vibrator */ |
| MFD_DEV_SIMPLE(VIBRATOR), |
| |
| /* current sink for keypad LED */ |
| MFD_DEV_SIMPLE(KEYLED), |
| }; |
| |
| int lp8788_read_byte(struct lp8788 *lp, u8 reg, u8 *data) |
| { |
| int ret; |
| unsigned int val; |
| |
| ret = regmap_read(lp->regmap, reg, &val); |
| if (ret < 0) { |
| dev_err(lp->dev, "failed to read 0x%.2x\n", reg); |
| return ret; |
| } |
| |
| *data = (u8)val; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(lp8788_read_byte); |
| |
| int lp8788_read_multi_bytes(struct lp8788 *lp, u8 reg, u8 *data, size_t count) |
| { |
| return regmap_bulk_read(lp->regmap, reg, data, count); |
| } |
| EXPORT_SYMBOL_GPL(lp8788_read_multi_bytes); |
| |
| int lp8788_write_byte(struct lp8788 *lp, u8 reg, u8 data) |
| { |
| return regmap_write(lp->regmap, reg, data); |
| } |
| EXPORT_SYMBOL_GPL(lp8788_write_byte); |
| |
| int lp8788_update_bits(struct lp8788 *lp, u8 reg, u8 mask, u8 data) |
| { |
| return regmap_update_bits(lp->regmap, reg, mask, data); |
| } |
| EXPORT_SYMBOL_GPL(lp8788_update_bits); |
| |
| static int lp8788_platform_init(struct lp8788 *lp) |
| { |
| struct lp8788_platform_data *pdata = lp->pdata; |
| |
| return (pdata && pdata->init_func) ? pdata->init_func(lp) : 0; |
| } |
| |
| static const struct regmap_config lp8788_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = MAX_LP8788_REGISTERS, |
| }; |
| |
| static int lp8788_probe(struct i2c_client *cl, const struct i2c_device_id *id) |
| { |
| struct lp8788 *lp; |
| struct lp8788_platform_data *pdata = dev_get_platdata(&cl->dev); |
| int ret; |
| |
| lp = devm_kzalloc(&cl->dev, sizeof(struct lp8788), GFP_KERNEL); |
| if (!lp) |
| return -ENOMEM; |
| |
| lp->regmap = devm_regmap_init_i2c(cl, &lp8788_regmap_config); |
| if (IS_ERR(lp->regmap)) { |
| ret = PTR_ERR(lp->regmap); |
| dev_err(&cl->dev, "regmap init i2c err: %d\n", ret); |
| return ret; |
| } |
| |
| lp->pdata = pdata; |
| lp->dev = &cl->dev; |
| i2c_set_clientdata(cl, lp); |
| |
| ret = lp8788_platform_init(lp); |
| if (ret) |
| return ret; |
| |
| ret = lp8788_irq_init(lp, cl->irq); |
| if (ret) |
| return ret; |
| |
| ret = mfd_add_devices(lp->dev, -1, lp8788_devs, |
| ARRAY_SIZE(lp8788_devs), NULL, 0, NULL); |
| if (ret) |
| goto err_exit_irq; |
| |
| return 0; |
| |
| err_exit_irq: |
| lp8788_irq_exit(lp); |
| return ret; |
| } |
| |
| static int lp8788_remove(struct i2c_client *cl) |
| { |
| struct lp8788 *lp = i2c_get_clientdata(cl); |
| |
| mfd_remove_devices(lp->dev); |
| lp8788_irq_exit(lp); |
| return 0; |
| } |
| |
| static const struct i2c_device_id lp8788_ids[] = { |
| {"lp8788", 0}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lp8788_ids); |
| |
| static struct i2c_driver lp8788_driver = { |
| .driver = { |
| .name = "lp8788", |
| }, |
| .probe = lp8788_probe, |
| .remove = lp8788_remove, |
| .id_table = lp8788_ids, |
| }; |
| |
| static int __init lp8788_init(void) |
| { |
| return i2c_add_driver(&lp8788_driver); |
| } |
| subsys_initcall(lp8788_init); |
| |
| static void __exit lp8788_exit(void) |
| { |
| i2c_del_driver(&lp8788_driver); |
| } |
| module_exit(lp8788_exit); |
| |
| MODULE_DESCRIPTION("TI LP8788 MFD Driver"); |
| MODULE_AUTHOR("Milo Kim"); |
| MODULE_LICENSE("GPL"); |