| /* |
| * EBI driver for Atmel chips |
| * inspired by the fsl weim bus driver |
| * |
| * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mfd/syscon/atmel-matrix.h> |
| #include <linux/mfd/syscon/atmel-smc.h> |
| #include <linux/init.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| |
| struct atmel_ebi_dev_config { |
| int cs; |
| struct atmel_smc_cs_conf smcconf; |
| }; |
| |
| struct atmel_ebi; |
| |
| struct atmel_ebi_dev { |
| struct list_head node; |
| struct atmel_ebi *ebi; |
| u32 mode; |
| int numcs; |
| struct atmel_ebi_dev_config configs[]; |
| }; |
| |
| struct atmel_ebi_caps { |
| unsigned int available_cs; |
| unsigned int ebi_csa_offs; |
| void (*get_config)(struct atmel_ebi_dev *ebid, |
| struct atmel_ebi_dev_config *conf); |
| int (*xlate_config)(struct atmel_ebi_dev *ebid, |
| struct device_node *configs_np, |
| struct atmel_ebi_dev_config *conf); |
| void (*apply_config)(struct atmel_ebi_dev *ebid, |
| struct atmel_ebi_dev_config *conf); |
| }; |
| |
| struct atmel_ebi { |
| struct clk *clk; |
| struct regmap *matrix; |
| struct { |
| struct regmap *regmap; |
| struct clk *clk; |
| const struct atmel_hsmc_reg_layout *layout; |
| } smc; |
| |
| struct device *dev; |
| const struct atmel_ebi_caps *caps; |
| struct list_head devs; |
| }; |
| |
| struct atmel_smc_timing_xlate { |
| const char *name; |
| int (*converter)(struct atmel_smc_cs_conf *conf, |
| unsigned int shift, unsigned int nycles); |
| unsigned int shift; |
| }; |
| |
| #define ATMEL_SMC_SETUP_XLATE(nm, pos) \ |
| { .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos} |
| |
| #define ATMEL_SMC_PULSE_XLATE(nm, pos) \ |
| { .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos} |
| |
| #define ATMEL_SMC_CYCLE_XLATE(nm, pos) \ |
| { .name = nm, .converter = atmel_smc_cs_conf_set_cycle, .shift = pos} |
| |
| static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid, |
| struct atmel_ebi_dev_config *conf) |
| { |
| atmel_smc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs, |
| &conf->smcconf); |
| } |
| |
| static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid, |
| struct atmel_ebi_dev_config *conf) |
| { |
| atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, |
| conf->cs, &conf->smcconf); |
| } |
| |
| static const struct atmel_smc_timing_xlate timings_xlate_table[] = { |
| ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-rd-setup-ns", |
| ATMEL_SMC_NCS_RD_SHIFT), |
| ATMEL_SMC_SETUP_XLATE("atmel,smc-ncs-wr-setup-ns", |
| ATMEL_SMC_NCS_WR_SHIFT), |
| ATMEL_SMC_SETUP_XLATE("atmel,smc-nrd-setup-ns", ATMEL_SMC_NRD_SHIFT), |
| ATMEL_SMC_SETUP_XLATE("atmel,smc-nwe-setup-ns", ATMEL_SMC_NWE_SHIFT), |
| ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-rd-pulse-ns", |
| ATMEL_SMC_NCS_RD_SHIFT), |
| ATMEL_SMC_PULSE_XLATE("atmel,smc-ncs-wr-pulse-ns", |
| ATMEL_SMC_NCS_WR_SHIFT), |
| ATMEL_SMC_PULSE_XLATE("atmel,smc-nrd-pulse-ns", ATMEL_SMC_NRD_SHIFT), |
| ATMEL_SMC_PULSE_XLATE("atmel,smc-nwe-pulse-ns", ATMEL_SMC_NWE_SHIFT), |
| ATMEL_SMC_CYCLE_XLATE("atmel,smc-nrd-cycle-ns", ATMEL_SMC_NRD_SHIFT), |
| ATMEL_SMC_CYCLE_XLATE("atmel,smc-nwe-cycle-ns", ATMEL_SMC_NWE_SHIFT), |
| }; |
| |
| static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid, |
| struct device_node *np, |
| struct atmel_smc_cs_conf *smcconf) |
| { |
| unsigned int clk_rate = clk_get_rate(ebid->ebi->clk); |
| unsigned int clk_period_ns = NSEC_PER_SEC / clk_rate; |
| bool required = false; |
| unsigned int ncycles; |
| int ret, i; |
| u32 val; |
| |
| ret = of_property_read_u32(np, "atmel,smc-tdf-ns", &val); |
| if (!ret) { |
| required = true; |
| ncycles = DIV_ROUND_UP(val, clk_period_ns); |
| if (ncycles > ATMEL_SMC_MODE_TDF_MAX) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (ncycles < ATMEL_SMC_MODE_TDF_MIN) |
| ncycles = ATMEL_SMC_MODE_TDF_MIN; |
| |
| smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(timings_xlate_table); i++) { |
| const struct atmel_smc_timing_xlate *xlate; |
| |
| xlate = &timings_xlate_table[i]; |
| |
| ret = of_property_read_u32(np, xlate->name, &val); |
| if (ret) { |
| if (!required) |
| continue; |
| else |
| break; |
| } |
| |
| if (!required) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| ncycles = DIV_ROUND_UP(val, clk_period_ns); |
| ret = xlate->converter(smcconf, xlate->shift, ncycles); |
| if (ret) |
| goto out; |
| } |
| |
| out: |
| if (ret) { |
| dev_err(ebid->ebi->dev, |
| "missing or invalid timings definition in %pOF", |
| np); |
| return ret; |
| } |
| |
| return required; |
| } |
| |
| static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid, |
| struct device_node *np, |
| struct atmel_ebi_dev_config *conf) |
| { |
| struct atmel_smc_cs_conf *smcconf = &conf->smcconf; |
| bool required = false; |
| const char *tmp_str; |
| u32 tmp; |
| int ret; |
| |
| ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp); |
| if (!ret) { |
| switch (tmp) { |
| case 8: |
| smcconf->mode |= ATMEL_SMC_MODE_DBW_8; |
| break; |
| |
| case 16: |
| smcconf->mode |= ATMEL_SMC_MODE_DBW_16; |
| break; |
| |
| case 32: |
| smcconf->mode |= ATMEL_SMC_MODE_DBW_32; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| required = true; |
| } |
| |
| if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) { |
| smcconf->mode |= ATMEL_SMC_MODE_TDFMODE_OPTIMIZED; |
| required = true; |
| } |
| |
| tmp_str = NULL; |
| of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str); |
| if (tmp_str && !strcmp(tmp_str, "write")) { |
| smcconf->mode |= ATMEL_SMC_MODE_BAT_WRITE; |
| required = true; |
| } |
| |
| tmp_str = NULL; |
| of_property_read_string(np, "atmel,smc-read-mode", &tmp_str); |
| if (tmp_str && !strcmp(tmp_str, "nrd")) { |
| smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD; |
| required = true; |
| } |
| |
| tmp_str = NULL; |
| of_property_read_string(np, "atmel,smc-write-mode", &tmp_str); |
| if (tmp_str && !strcmp(tmp_str, "nwe")) { |
| smcconf->mode |= ATMEL_SMC_MODE_WRITEMODE_NWE; |
| required = true; |
| } |
| |
| tmp_str = NULL; |
| of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str); |
| if (tmp_str) { |
| if (!strcmp(tmp_str, "frozen")) |
| smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_FROZEN; |
| else if (!strcmp(tmp_str, "ready")) |
| smcconf->mode |= ATMEL_SMC_MODE_EXNWMODE_READY; |
| else if (strcmp(tmp_str, "disabled")) |
| return -EINVAL; |
| |
| required = true; |
| } |
| |
| ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp); |
| if (!ret) { |
| switch (tmp) { |
| case 4: |
| smcconf->mode |= ATMEL_SMC_MODE_PS_4; |
| break; |
| |
| case 8: |
| smcconf->mode |= ATMEL_SMC_MODE_PS_8; |
| break; |
| |
| case 16: |
| smcconf->mode |= ATMEL_SMC_MODE_PS_16; |
| break; |
| |
| case 32: |
| smcconf->mode |= ATMEL_SMC_MODE_PS_32; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| smcconf->mode |= ATMEL_SMC_MODE_PMEN; |
| required = true; |
| } |
| |
| ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf); |
| if (ret < 0) |
| return -EINVAL; |
| |
| if ((ret > 0 && !required) || (!ret && required)) { |
| dev_err(ebid->ebi->dev, "missing atmel,smc- properties in %pOF", |
| np); |
| return -EINVAL; |
| } |
| |
| return required; |
| } |
| |
| static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid, |
| struct atmel_ebi_dev_config *conf) |
| { |
| atmel_smc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs, |
| &conf->smcconf); |
| } |
| |
| static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid, |
| struct atmel_ebi_dev_config *conf) |
| { |
| atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout, |
| conf->cs, &conf->smcconf); |
| } |
| |
| static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np, |
| int reg_cells) |
| { |
| const struct atmel_ebi_caps *caps = ebi->caps; |
| struct atmel_ebi_dev_config conf = { }; |
| struct device *dev = ebi->dev; |
| struct atmel_ebi_dev *ebid; |
| unsigned long cslines = 0; |
| int ret, numcs = 0, nentries, i; |
| bool apply = false; |
| u32 cs; |
| |
| nentries = of_property_count_elems_of_size(np, "reg", |
| reg_cells * sizeof(u32)); |
| for (i = 0; i < nentries; i++) { |
| ret = of_property_read_u32_index(np, "reg", i * reg_cells, |
| &cs); |
| if (ret) |
| return ret; |
| |
| if (cs >= AT91_MATRIX_EBI_NUM_CS || |
| !(ebi->caps->available_cs & BIT(cs))) { |
| dev_err(dev, "invalid reg property in %pOF\n", np); |
| return -EINVAL; |
| } |
| |
| if (!test_and_set_bit(cs, &cslines)) |
| numcs++; |
| } |
| |
| if (!numcs) { |
| dev_err(dev, "invalid reg property in %pOF\n", np); |
| return -EINVAL; |
| } |
| |
| ebid = devm_kzalloc(ebi->dev, |
| sizeof(*ebid) + (numcs * sizeof(*ebid->configs)), |
| GFP_KERNEL); |
| if (!ebid) |
| return -ENOMEM; |
| |
| ebid->ebi = ebi; |
| ebid->numcs = numcs; |
| |
| ret = caps->xlate_config(ebid, np, &conf); |
| if (ret < 0) |
| return ret; |
| else if (ret) |
| apply = true; |
| |
| i = 0; |
| for_each_set_bit(cs, &cslines, AT91_MATRIX_EBI_NUM_CS) { |
| ebid->configs[i].cs = cs; |
| |
| if (apply) { |
| conf.cs = cs; |
| caps->apply_config(ebid, &conf); |
| } |
| |
| caps->get_config(ebid, &ebid->configs[i]); |
| |
| /* |
| * Attach the EBI device to the generic SMC logic if at least |
| * one "atmel,smc-" property is present. |
| */ |
| if (ebi->caps->ebi_csa_offs && apply) |
| regmap_update_bits(ebi->matrix, |
| ebi->caps->ebi_csa_offs, |
| BIT(cs), 0); |
| |
| i++; |
| } |
| |
| list_add_tail(&ebid->node, &ebi->devs); |
| |
| return 0; |
| } |
| |
| static const struct atmel_ebi_caps at91sam9260_ebi_caps = { |
| .available_cs = 0xff, |
| .ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA, |
| .get_config = at91sam9_ebi_get_config, |
| .xlate_config = atmel_ebi_xslate_smc_config, |
| .apply_config = at91sam9_ebi_apply_config, |
| }; |
| |
| static const struct atmel_ebi_caps at91sam9261_ebi_caps = { |
| .available_cs = 0xff, |
| .ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA, |
| .get_config = at91sam9_ebi_get_config, |
| .xlate_config = atmel_ebi_xslate_smc_config, |
| .apply_config = at91sam9_ebi_apply_config, |
| }; |
| |
| static const struct atmel_ebi_caps at91sam9263_ebi0_caps = { |
| .available_cs = 0x3f, |
| .ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA, |
| .get_config = at91sam9_ebi_get_config, |
| .xlate_config = atmel_ebi_xslate_smc_config, |
| .apply_config = at91sam9_ebi_apply_config, |
| }; |
| |
| static const struct atmel_ebi_caps at91sam9263_ebi1_caps = { |
| .available_cs = 0x7, |
| .ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA, |
| .get_config = at91sam9_ebi_get_config, |
| .xlate_config = atmel_ebi_xslate_smc_config, |
| .apply_config = at91sam9_ebi_apply_config, |
| }; |
| |
| static const struct atmel_ebi_caps at91sam9rl_ebi_caps = { |
| .available_cs = 0x3f, |
| .ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA, |
| .get_config = at91sam9_ebi_get_config, |
| .xlate_config = atmel_ebi_xslate_smc_config, |
| .apply_config = at91sam9_ebi_apply_config, |
| }; |
| |
| static const struct atmel_ebi_caps at91sam9g45_ebi_caps = { |
| .available_cs = 0x3f, |
| .ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA, |
| .get_config = at91sam9_ebi_get_config, |
| .xlate_config = atmel_ebi_xslate_smc_config, |
| .apply_config = at91sam9_ebi_apply_config, |
| }; |
| |
| static const struct atmel_ebi_caps at91sam9x5_ebi_caps = { |
| .available_cs = 0x3f, |
| .ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA, |
| .get_config = at91sam9_ebi_get_config, |
| .xlate_config = atmel_ebi_xslate_smc_config, |
| .apply_config = at91sam9_ebi_apply_config, |
| }; |
| |
| static const struct atmel_ebi_caps sama5d3_ebi_caps = { |
| .available_cs = 0xf, |
| .get_config = sama5_ebi_get_config, |
| .xlate_config = atmel_ebi_xslate_smc_config, |
| .apply_config = sama5_ebi_apply_config, |
| }; |
| |
| static const struct of_device_id atmel_ebi_id_table[] = { |
| { |
| .compatible = "atmel,at91sam9260-ebi", |
| .data = &at91sam9260_ebi_caps, |
| }, |
| { |
| .compatible = "atmel,at91sam9261-ebi", |
| .data = &at91sam9261_ebi_caps, |
| }, |
| { |
| .compatible = "atmel,at91sam9263-ebi0", |
| .data = &at91sam9263_ebi0_caps, |
| }, |
| { |
| .compatible = "atmel,at91sam9263-ebi1", |
| .data = &at91sam9263_ebi1_caps, |
| }, |
| { |
| .compatible = "atmel,at91sam9rl-ebi", |
| .data = &at91sam9rl_ebi_caps, |
| }, |
| { |
| .compatible = "atmel,at91sam9g45-ebi", |
| .data = &at91sam9g45_ebi_caps, |
| }, |
| { |
| .compatible = "atmel,at91sam9x5-ebi", |
| .data = &at91sam9x5_ebi_caps, |
| }, |
| { |
| .compatible = "atmel,sama5d3-ebi", |
| .data = &sama5d3_ebi_caps, |
| }, |
| { /* sentinel */ } |
| }; |
| |
| static int atmel_ebi_dev_disable(struct atmel_ebi *ebi, struct device_node *np) |
| { |
| struct device *dev = ebi->dev; |
| struct property *newprop; |
| |
| newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL); |
| if (!newprop) |
| return -ENOMEM; |
| |
| newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL); |
| if (!newprop->name) |
| return -ENOMEM; |
| |
| newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL); |
| if (!newprop->value) |
| return -ENOMEM; |
| |
| newprop->length = sizeof("disabled"); |
| |
| return of_update_property(np, newprop); |
| } |
| |
| static int atmel_ebi_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *child, *np = dev->of_node, *smc_np; |
| const struct of_device_id *match; |
| struct atmel_ebi *ebi; |
| int ret, reg_cells; |
| struct clk *clk; |
| u32 val; |
| |
| match = of_match_device(atmel_ebi_id_table, dev); |
| if (!match || !match->data) |
| return -EINVAL; |
| |
| ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL); |
| if (!ebi) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ebi); |
| |
| INIT_LIST_HEAD(&ebi->devs); |
| ebi->caps = match->data; |
| ebi->dev = dev; |
| |
| clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| ebi->clk = clk; |
| |
| smc_np = of_parse_phandle(dev->of_node, "atmel,smc", 0); |
| |
| ebi->smc.regmap = syscon_node_to_regmap(smc_np); |
| if (IS_ERR(ebi->smc.regmap)) { |
| ret = PTR_ERR(ebi->smc.regmap); |
| goto put_node; |
| } |
| |
| ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np); |
| if (IS_ERR(ebi->smc.layout)) { |
| ret = PTR_ERR(ebi->smc.layout); |
| goto put_node; |
| } |
| |
| ebi->smc.clk = of_clk_get(smc_np, 0); |
| if (IS_ERR(ebi->smc.clk)) { |
| if (PTR_ERR(ebi->smc.clk) != -ENOENT) { |
| ret = PTR_ERR(ebi->smc.clk); |
| goto put_node; |
| } |
| |
| ebi->smc.clk = NULL; |
| } |
| of_node_put(smc_np); |
| ret = clk_prepare_enable(ebi->smc.clk); |
| if (ret) |
| return ret; |
| |
| /* |
| * The sama5d3 does not provide an EBICSA register and thus does need |
| * to access the matrix registers. |
| */ |
| if (ebi->caps->ebi_csa_offs) { |
| ebi->matrix = |
| syscon_regmap_lookup_by_phandle(np, "atmel,matrix"); |
| if (IS_ERR(ebi->matrix)) |
| return PTR_ERR(ebi->matrix); |
| } |
| |
| ret = of_property_read_u32(np, "#address-cells", &val); |
| if (ret) { |
| dev_err(dev, "missing #address-cells property\n"); |
| return ret; |
| } |
| |
| reg_cells = val; |
| |
| ret = of_property_read_u32(np, "#size-cells", &val); |
| if (ret) { |
| dev_err(dev, "missing #address-cells property\n"); |
| return ret; |
| } |
| |
| reg_cells += val; |
| |
| for_each_available_child_of_node(np, child) { |
| if (!of_find_property(child, "reg", NULL)) |
| continue; |
| |
| ret = atmel_ebi_dev_setup(ebi, child, reg_cells); |
| if (ret) { |
| dev_err(dev, "failed to configure EBI bus for %pOF, disabling the device", |
| child); |
| |
| ret = atmel_ebi_dev_disable(ebi, child); |
| if (ret) { |
| of_node_put(child); |
| return ret; |
| } |
| } |
| } |
| |
| return of_platform_populate(np, NULL, NULL, dev); |
| |
| put_node: |
| of_node_put(smc_np); |
| return ret; |
| } |
| |
| static __maybe_unused int atmel_ebi_resume(struct device *dev) |
| { |
| struct atmel_ebi *ebi = dev_get_drvdata(dev); |
| struct atmel_ebi_dev *ebid; |
| |
| list_for_each_entry(ebid, &ebi->devs, node) { |
| int i; |
| |
| for (i = 0; i < ebid->numcs; i++) |
| ebid->ebi->caps->apply_config(ebid, &ebid->configs[i]); |
| } |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(atmel_ebi_pm_ops, NULL, atmel_ebi_resume); |
| |
| static struct platform_driver atmel_ebi_driver = { |
| .driver = { |
| .name = "atmel-ebi", |
| .of_match_table = atmel_ebi_id_table, |
| .pm = &atmel_ebi_pm_ops, |
| }, |
| }; |
| builtin_platform_driver_probe(atmel_ebi_driver, atmel_ebi_probe); |