| /* |
| * TechnoTrend USB IR Receiver |
| * |
| * Copyright (C) 2012 Sean Young <sean@mess.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/usb/input.h> |
| #include <linux/slab.h> |
| #include <linux/leds.h> |
| #include <media/rc-core.h> |
| |
| #define DRIVER_NAME "ttusbir" |
| #define DRIVER_DESC "TechnoTrend USB IR Receiver" |
| /* |
| * The Windows driver uses 8 URBS, the original lirc drivers has a |
| * configurable amount (2 default, 4 max). This device generates about 125 |
| * messages per second (!), whether IR is idle or not. |
| */ |
| #define NUM_URBS 4 |
| #define NS_PER_BYTE 62500 |
| #define NS_PER_BIT (NS_PER_BYTE/8) |
| |
| struct ttusbir { |
| struct rc_dev *rc; |
| struct device *dev; |
| struct usb_device *udev; |
| |
| struct urb *urb[NUM_URBS]; |
| |
| struct led_classdev led; |
| struct urb *bulk_urb; |
| uint8_t bulk_buffer[5]; |
| int bulk_out_endp, iso_in_endp; |
| bool led_on, is_led_on; |
| atomic_t led_complete; |
| |
| char phys[64]; |
| }; |
| |
| static enum led_brightness ttusbir_brightness_get(struct led_classdev *led_dev) |
| { |
| struct ttusbir *tt = container_of(led_dev, struct ttusbir, led); |
| |
| return tt->led_on ? LED_FULL : LED_OFF; |
| } |
| |
| static void ttusbir_set_led(struct ttusbir *tt) |
| { |
| int ret; |
| |
| smp_mb(); |
| |
| if (tt->led_on != tt->is_led_on && tt->udev && |
| atomic_add_unless(&tt->led_complete, 1, 1)) { |
| tt->bulk_buffer[4] = tt->is_led_on = tt->led_on; |
| ret = usb_submit_urb(tt->bulk_urb, GFP_ATOMIC); |
| if (ret) { |
| dev_warn(tt->dev, "failed to submit bulk urb: %d\n", |
| ret); |
| atomic_dec(&tt->led_complete); |
| } |
| } |
| } |
| |
| static void ttusbir_brightness_set(struct led_classdev *led_dev, enum |
| led_brightness brightness) |
| { |
| struct ttusbir *tt = container_of(led_dev, struct ttusbir, led); |
| |
| tt->led_on = brightness != LED_OFF; |
| |
| ttusbir_set_led(tt); |
| } |
| |
| /* |
| * The urb cannot be reused until the urb completes |
| */ |
| static void ttusbir_bulk_complete(struct urb *urb) |
| { |
| struct ttusbir *tt = urb->context; |
| |
| atomic_dec(&tt->led_complete); |
| |
| switch (urb->status) { |
| case 0: |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| usb_unlink_urb(urb); |
| return; |
| case -EPIPE: |
| default: |
| dev_dbg(tt->dev, "Error: urb status = %d\n", urb->status); |
| break; |
| } |
| |
| ttusbir_set_led(tt); |
| } |
| |
| /* |
| * The data is one bit per sample, a set bit signifying silence and samples |
| * being MSB first. Bit 0 can contain garbage so take it to be whatever |
| * bit 1 is, so we don't have unexpected edges. |
| */ |
| static void ttusbir_process_ir_data(struct ttusbir *tt, uint8_t *buf) |
| { |
| struct ir_raw_event rawir; |
| unsigned i, v, b; |
| bool event = false; |
| |
| init_ir_raw_event(&rawir); |
| |
| for (i = 0; i < 128; i++) { |
| v = buf[i] & 0xfe; |
| switch (v) { |
| case 0xfe: |
| rawir.pulse = false; |
| rawir.duration = NS_PER_BYTE; |
| if (ir_raw_event_store_with_filter(tt->rc, &rawir)) |
| event = true; |
| break; |
| case 0: |
| rawir.pulse = true; |
| rawir.duration = NS_PER_BYTE; |
| if (ir_raw_event_store_with_filter(tt->rc, &rawir)) |
| event = true; |
| break; |
| default: |
| /* one edge per byte */ |
| if (v & 2) { |
| b = ffz(v | 1); |
| rawir.pulse = true; |
| } else { |
| b = ffs(v) - 1; |
| rawir.pulse = false; |
| } |
| |
| rawir.duration = NS_PER_BIT * (8 - b); |
| if (ir_raw_event_store_with_filter(tt->rc, &rawir)) |
| event = true; |
| |
| rawir.pulse = !rawir.pulse; |
| rawir.duration = NS_PER_BIT * b; |
| if (ir_raw_event_store_with_filter(tt->rc, &rawir)) |
| event = true; |
| break; |
| } |
| } |
| |
| /* don't wakeup when there's nothing to do */ |
| if (event) |
| ir_raw_event_handle(tt->rc); |
| } |
| |
| static void ttusbir_urb_complete(struct urb *urb) |
| { |
| struct ttusbir *tt = urb->context; |
| int rc; |
| |
| switch (urb->status) { |
| case 0: |
| ttusbir_process_ir_data(tt, urb->transfer_buffer); |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| usb_unlink_urb(urb); |
| return; |
| case -EPIPE: |
| default: |
| dev_dbg(tt->dev, "Error: urb status = %d\n", urb->status); |
| break; |
| } |
| |
| rc = usb_submit_urb(urb, GFP_ATOMIC); |
| if (rc && rc != -ENODEV) |
| dev_warn(tt->dev, "failed to resubmit urb: %d\n", rc); |
| } |
| |
| static int ttusbir_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct ttusbir *tt; |
| struct usb_interface_descriptor *idesc; |
| struct usb_endpoint_descriptor *desc; |
| struct rc_dev *rc; |
| int i, j, ret; |
| int altsetting = -1; |
| |
| tt = kzalloc(sizeof(*tt), GFP_KERNEL); |
| rc = rc_allocate_device(RC_DRIVER_IR_RAW); |
| if (!tt || !rc) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* find the correct alt setting */ |
| for (i = 0; i < intf->num_altsetting && altsetting == -1; i++) { |
| int max_packet, bulk_out_endp = -1, iso_in_endp = -1; |
| |
| idesc = &intf->altsetting[i].desc; |
| |
| for (j = 0; j < idesc->bNumEndpoints; j++) { |
| desc = &intf->altsetting[i].endpoint[j].desc; |
| max_packet = le16_to_cpu(desc->wMaxPacketSize); |
| if (usb_endpoint_dir_in(desc) && |
| usb_endpoint_xfer_isoc(desc) && |
| max_packet == 0x10) |
| iso_in_endp = j; |
| else if (usb_endpoint_dir_out(desc) && |
| usb_endpoint_xfer_bulk(desc) && |
| max_packet == 0x20) |
| bulk_out_endp = j; |
| |
| if (bulk_out_endp != -1 && iso_in_endp != -1) { |
| tt->bulk_out_endp = bulk_out_endp; |
| tt->iso_in_endp = iso_in_endp; |
| altsetting = i; |
| break; |
| } |
| } |
| } |
| |
| if (altsetting == -1) { |
| dev_err(&intf->dev, "cannot find expected altsetting\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| tt->dev = &intf->dev; |
| tt->udev = interface_to_usbdev(intf); |
| tt->rc = rc; |
| |
| ret = usb_set_interface(tt->udev, 0, altsetting); |
| if (ret) |
| goto out; |
| |
| for (i = 0; i < NUM_URBS; i++) { |
| struct urb *urb = usb_alloc_urb(8, GFP_KERNEL); |
| void *buffer; |
| |
| if (!urb) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| urb->dev = tt->udev; |
| urb->context = tt; |
| urb->pipe = usb_rcvisocpipe(tt->udev, tt->iso_in_endp); |
| urb->interval = 1; |
| buffer = usb_alloc_coherent(tt->udev, 128, GFP_KERNEL, |
| &urb->transfer_dma); |
| if (!buffer) { |
| usb_free_urb(urb); |
| ret = -ENOMEM; |
| goto out; |
| } |
| urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP | URB_ISO_ASAP; |
| urb->transfer_buffer = buffer; |
| urb->complete = ttusbir_urb_complete; |
| urb->number_of_packets = 8; |
| urb->transfer_buffer_length = 128; |
| |
| for (j = 0; j < 8; j++) { |
| urb->iso_frame_desc[j].offset = j * 16; |
| urb->iso_frame_desc[j].length = 16; |
| } |
| |
| tt->urb[i] = urb; |
| } |
| |
| tt->bulk_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!tt->bulk_urb) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| tt->bulk_buffer[0] = 0xaa; |
| tt->bulk_buffer[1] = 0x01; |
| tt->bulk_buffer[2] = 0x05; |
| tt->bulk_buffer[3] = 0x01; |
| |
| usb_fill_bulk_urb(tt->bulk_urb, tt->udev, usb_sndbulkpipe(tt->udev, |
| tt->bulk_out_endp), tt->bulk_buffer, sizeof(tt->bulk_buffer), |
| ttusbir_bulk_complete, tt); |
| |
| tt->led.name = "ttusbir:green:power"; |
| tt->led.default_trigger = "rc-feedback"; |
| tt->led.brightness_set = ttusbir_brightness_set; |
| tt->led.brightness_get = ttusbir_brightness_get; |
| tt->is_led_on = tt->led_on = true; |
| atomic_set(&tt->led_complete, 0); |
| ret = led_classdev_register(&intf->dev, &tt->led); |
| if (ret) |
| goto out; |
| |
| usb_make_path(tt->udev, tt->phys, sizeof(tt->phys)); |
| |
| rc->device_name = DRIVER_DESC; |
| rc->input_phys = tt->phys; |
| usb_to_input_id(tt->udev, &rc->input_id); |
| rc->dev.parent = &intf->dev; |
| rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; |
| rc->priv = tt; |
| rc->driver_name = DRIVER_NAME; |
| rc->map_name = RC_MAP_TT_1500; |
| rc->min_timeout = 1; |
| rc->timeout = IR_DEFAULT_TIMEOUT; |
| rc->max_timeout = 10 * IR_DEFAULT_TIMEOUT; |
| |
| /* |
| * The precision is NS_PER_BIT, but since every 8th bit can be |
| * overwritten with garbage the accuracy is at best 2 * NS_PER_BIT. |
| */ |
| rc->rx_resolution = NS_PER_BIT; |
| |
| ret = rc_register_device(rc); |
| if (ret) { |
| dev_err(&intf->dev, "failed to register rc device %d\n", ret); |
| goto out2; |
| } |
| |
| usb_set_intfdata(intf, tt); |
| |
| for (i = 0; i < NUM_URBS; i++) { |
| ret = usb_submit_urb(tt->urb[i], GFP_KERNEL); |
| if (ret) { |
| dev_err(tt->dev, "failed to submit urb %d\n", ret); |
| goto out3; |
| } |
| } |
| |
| return 0; |
| out3: |
| rc_unregister_device(rc); |
| rc = NULL; |
| out2: |
| led_classdev_unregister(&tt->led); |
| out: |
| if (tt) { |
| for (i = 0; i < NUM_URBS && tt->urb[i]; i++) { |
| struct urb *urb = tt->urb[i]; |
| |
| usb_kill_urb(urb); |
| usb_free_coherent(tt->udev, 128, urb->transfer_buffer, |
| urb->transfer_dma); |
| usb_free_urb(urb); |
| } |
| usb_kill_urb(tt->bulk_urb); |
| usb_free_urb(tt->bulk_urb); |
| kfree(tt); |
| } |
| rc_free_device(rc); |
| |
| return ret; |
| } |
| |
| static void ttusbir_disconnect(struct usb_interface *intf) |
| { |
| struct ttusbir *tt = usb_get_intfdata(intf); |
| struct usb_device *udev = tt->udev; |
| int i; |
| |
| tt->udev = NULL; |
| |
| rc_unregister_device(tt->rc); |
| led_classdev_unregister(&tt->led); |
| for (i = 0; i < NUM_URBS; i++) { |
| usb_kill_urb(tt->urb[i]); |
| usb_free_coherent(udev, 128, tt->urb[i]->transfer_buffer, |
| tt->urb[i]->transfer_dma); |
| usb_free_urb(tt->urb[i]); |
| } |
| usb_kill_urb(tt->bulk_urb); |
| usb_free_urb(tt->bulk_urb); |
| usb_set_intfdata(intf, NULL); |
| kfree(tt); |
| } |
| |
| static int ttusbir_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct ttusbir *tt = usb_get_intfdata(intf); |
| int i; |
| |
| for (i = 0; i < NUM_URBS; i++) |
| usb_kill_urb(tt->urb[i]); |
| |
| led_classdev_suspend(&tt->led); |
| usb_kill_urb(tt->bulk_urb); |
| |
| return 0; |
| } |
| |
| static int ttusbir_resume(struct usb_interface *intf) |
| { |
| struct ttusbir *tt = usb_get_intfdata(intf); |
| int i, rc; |
| |
| tt->is_led_on = true; |
| led_classdev_resume(&tt->led); |
| |
| for (i = 0; i < NUM_URBS; i++) { |
| rc = usb_submit_urb(tt->urb[i], GFP_KERNEL); |
| if (rc) { |
| dev_warn(tt->dev, "failed to submit urb: %d\n", rc); |
| break; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static const struct usb_device_id ttusbir_table[] = { |
| { USB_DEVICE(0x0b48, 0x2003) }, |
| { } |
| }; |
| |
| static struct usb_driver ttusbir_driver = { |
| .name = DRIVER_NAME, |
| .id_table = ttusbir_table, |
| .probe = ttusbir_probe, |
| .suspend = ttusbir_suspend, |
| .resume = ttusbir_resume, |
| .reset_resume = ttusbir_resume, |
| .disconnect = ttusbir_disconnect, |
| }; |
| |
| module_usb_driver(ttusbir_driver); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_AUTHOR("Sean Young <sean@mess.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(usb, ttusbir_table); |
| |