| /* |
| * Afatech AF9013 demodulator driver |
| * |
| * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> |
| * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> |
| * |
| * Thanks to Afatech who kindly provided information. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include "af9013_priv.h" |
| |
| struct af9013_state { |
| struct i2c_client *client; |
| struct regmap *regmap; |
| struct dvb_frontend fe; |
| u32 clk; |
| u8 tuner; |
| u32 if_frequency; |
| u8 ts_mode; |
| u8 ts_output_pin; |
| bool spec_inv; |
| u8 api_version[4]; |
| u8 gpio[4]; |
| |
| /* tuner/demod RF and IF AGC limits used for signal strength calc */ |
| u8 signal_strength_en, rf_50, rf_80, if_50, if_80; |
| u16 signal_strength; |
| u32 ber; |
| u32 ucblocks; |
| u16 snr; |
| u32 bandwidth_hz; |
| enum fe_status fe_status; |
| unsigned long set_frontend_jiffies; |
| unsigned long read_status_jiffies; |
| bool first_tune; |
| bool i2c_gate_state; |
| unsigned int statistics_step:3; |
| struct delayed_work statistics_work; |
| }; |
| |
| static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) |
| { |
| struct i2c_client *client = state->client; |
| int ret; |
| u8 pos; |
| u16 addr; |
| |
| dev_dbg(&client->dev, "gpio %u, gpioval %02x\n", gpio, gpioval); |
| |
| /* |
| * GPIO0 & GPIO1 0xd735 |
| * GPIO2 & GPIO3 0xd736 |
| */ |
| |
| switch (gpio) { |
| case 0: |
| case 1: |
| addr = 0xd735; |
| break; |
| case 2: |
| case 3: |
| addr = 0xd736; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| switch (gpio) { |
| case 0: |
| case 2: |
| pos = 0; |
| break; |
| case 1: |
| case 3: |
| default: |
| pos = 4; |
| break; |
| } |
| |
| ret = regmap_update_bits(state->regmap, addr, 0x0f << pos, |
| gpioval << pos); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_ber_unc_start(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| int ret; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* reset and start BER counter */ |
| ret = regmap_update_bits(state->regmap, 0xd391, 0x10, 0x10); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_ber_unc_result(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| int ret; |
| unsigned int utmp; |
| u8 buf[5]; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* check if error bit count is ready */ |
| ret = regmap_read(state->regmap, 0xd391, &utmp); |
| if (ret) |
| goto err; |
| |
| if (!((utmp >> 4) & 0x01)) { |
| dev_dbg(&client->dev, "not ready\n"); |
| return 0; |
| } |
| |
| ret = regmap_bulk_read(state->regmap, 0xd387, buf, 5); |
| if (ret) |
| goto err; |
| |
| state->ber = (buf[2] << 16) | (buf[1] << 8) | buf[0]; |
| state->ucblocks += (buf[4] << 8) | buf[3]; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_snr_start(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| int ret; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* start SNR meas */ |
| ret = regmap_update_bits(state->regmap, 0xd2e1, 0x08, 0x08); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_snr_result(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i, len; |
| unsigned int utmp; |
| u8 buf[3]; |
| u32 snr_val; |
| const struct af9013_snr *uninitialized_var(snr_lut); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* check if SNR ready */ |
| ret = regmap_read(state->regmap, 0xd2e1, &utmp); |
| if (ret) |
| goto err; |
| |
| if (!((utmp >> 3) & 0x01)) { |
| dev_dbg(&client->dev, "not ready\n"); |
| return 0; |
| } |
| |
| /* read value */ |
| ret = regmap_bulk_read(state->regmap, 0xd2e3, buf, 3); |
| if (ret) |
| goto err; |
| |
| snr_val = (buf[2] << 16) | (buf[1] << 8) | buf[0]; |
| |
| /* read current modulation */ |
| ret = regmap_read(state->regmap, 0xd3c1, &utmp); |
| if (ret) |
| goto err; |
| |
| switch ((utmp >> 6) & 3) { |
| case 0: |
| len = ARRAY_SIZE(qpsk_snr_lut); |
| snr_lut = qpsk_snr_lut; |
| break; |
| case 1: |
| len = ARRAY_SIZE(qam16_snr_lut); |
| snr_lut = qam16_snr_lut; |
| break; |
| case 2: |
| len = ARRAY_SIZE(qam64_snr_lut); |
| snr_lut = qam64_snr_lut; |
| break; |
| default: |
| goto err; |
| } |
| |
| for (i = 0; i < len; i++) { |
| utmp = snr_lut[i].snr; |
| |
| if (snr_val < snr_lut[i].val) |
| break; |
| } |
| state->snr = utmp * 10; /* dB/10 */ |
| |
| c->cnr.stat[0].svalue = 1000 * utmp; |
| c->cnr.stat[0].scale = FE_SCALE_DECIBEL; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_statistics_signal_strength(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| int ret = 0; |
| u8 buf[2], rf_gain, if_gain; |
| int signal_strength; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| if (!state->signal_strength_en) |
| return 0; |
| |
| ret = regmap_bulk_read(state->regmap, 0xd07c, buf, 2); |
| if (ret) |
| goto err; |
| |
| rf_gain = buf[0]; |
| if_gain = buf[1]; |
| |
| signal_strength = (0xffff / \ |
| (9 * (state->rf_50 + state->if_50) - \ |
| 11 * (state->rf_80 + state->if_80))) * \ |
| (10 * (rf_gain + if_gain) - \ |
| 11 * (state->rf_80 + state->if_80)); |
| if (signal_strength < 0) |
| signal_strength = 0; |
| else if (signal_strength > 0xffff) |
| signal_strength = 0xffff; |
| |
| state->signal_strength = signal_strength; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static void af9013_statistics_work(struct work_struct *work) |
| { |
| struct af9013_state *state = container_of(work, |
| struct af9013_state, statistics_work.work); |
| unsigned int next_msec; |
| |
| /* update only signal strength when demod is not locked */ |
| if (!(state->fe_status & FE_HAS_LOCK)) { |
| state->statistics_step = 0; |
| state->ber = 0; |
| state->snr = 0; |
| } |
| |
| switch (state->statistics_step) { |
| default: |
| state->statistics_step = 0; |
| /* fall-through */ |
| case 0: |
| af9013_statistics_signal_strength(&state->fe); |
| state->statistics_step++; |
| next_msec = 300; |
| break; |
| case 1: |
| af9013_statistics_snr_start(&state->fe); |
| state->statistics_step++; |
| next_msec = 200; |
| break; |
| case 2: |
| af9013_statistics_ber_unc_start(&state->fe); |
| state->statistics_step++; |
| next_msec = 1000; |
| break; |
| case 3: |
| af9013_statistics_snr_result(&state->fe); |
| state->statistics_step++; |
| next_msec = 400; |
| break; |
| case 4: |
| af9013_statistics_ber_unc_result(&state->fe); |
| state->statistics_step++; |
| next_msec = 100; |
| break; |
| } |
| |
| schedule_delayed_work(&state->statistics_work, |
| msecs_to_jiffies(next_msec)); |
| } |
| |
| static int af9013_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *fesettings) |
| { |
| fesettings->min_delay_ms = 800; |
| fesettings->step_size = 0; |
| fesettings->max_drift = 0; |
| |
| return 0; |
| } |
| |
| static int af9013_set_frontend(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i, sampling_freq; |
| bool auto_mode, spec_inv; |
| u8 buf[6]; |
| u32 if_frequency, freq_cw; |
| |
| dev_dbg(&client->dev, "frequency %u, bandwidth_hz %u\n", |
| c->frequency, c->bandwidth_hz); |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) { |
| ret = fe->ops.tuner_ops.set_params(fe); |
| if (ret) |
| goto err; |
| } |
| |
| /* program CFOE coefficients */ |
| if (c->bandwidth_hz != state->bandwidth_hz) { |
| for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) { |
| if (coeff_lut[i].clock == state->clk && |
| coeff_lut[i].bandwidth_hz == c->bandwidth_hz) { |
| break; |
| } |
| } |
| |
| /* Return an error if can't find bandwidth or the right clock */ |
| if (i == ARRAY_SIZE(coeff_lut)) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = regmap_bulk_write(state->regmap, 0xae00, coeff_lut[i].val, |
| sizeof(coeff_lut[i].val)); |
| if (ret) |
| goto err; |
| } |
| |
| /* program frequency control */ |
| if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) { |
| /* get used IF frequency */ |
| if (fe->ops.tuner_ops.get_if_frequency) { |
| ret = fe->ops.tuner_ops.get_if_frequency(fe, |
| &if_frequency); |
| if (ret) |
| goto err; |
| } else { |
| if_frequency = state->if_frequency; |
| } |
| |
| dev_dbg(&client->dev, "if_frequency %u\n", if_frequency); |
| |
| sampling_freq = if_frequency; |
| |
| while (sampling_freq > (state->clk / 2)) |
| sampling_freq -= state->clk; |
| |
| if (sampling_freq < 0) { |
| sampling_freq *= -1; |
| spec_inv = state->spec_inv; |
| } else { |
| spec_inv = !state->spec_inv; |
| } |
| |
| freq_cw = DIV_ROUND_CLOSEST_ULL((u64)sampling_freq * 0x800000, |
| state->clk); |
| |
| if (spec_inv) |
| freq_cw = 0x800000 - freq_cw; |
| |
| buf[0] = (freq_cw >> 0) & 0xff; |
| buf[1] = (freq_cw >> 8) & 0xff; |
| buf[2] = (freq_cw >> 16) & 0x7f; |
| |
| freq_cw = 0x800000 - freq_cw; |
| |
| buf[3] = (freq_cw >> 0) & 0xff; |
| buf[4] = (freq_cw >> 8) & 0xff; |
| buf[5] = (freq_cw >> 16) & 0x7f; |
| |
| ret = regmap_bulk_write(state->regmap, 0xd140, buf, 3); |
| if (ret) |
| goto err; |
| |
| ret = regmap_bulk_write(state->regmap, 0x9be7, buf, 6); |
| if (ret) |
| goto err; |
| } |
| |
| /* clear TPS lock flag */ |
| ret = regmap_update_bits(state->regmap, 0xd330, 0x08, 0x08); |
| if (ret) |
| goto err; |
| |
| /* clear MPEG2 lock flag */ |
| ret = regmap_update_bits(state->regmap, 0xd507, 0x40, 0x00); |
| if (ret) |
| goto err; |
| |
| /* empty channel function */ |
| ret = regmap_update_bits(state->regmap, 0x9bfe, 0x01, 0x00); |
| if (ret) |
| goto err; |
| |
| /* empty DVB-T channel function */ |
| ret = regmap_update_bits(state->regmap, 0x9bc2, 0x01, 0x00); |
| if (ret) |
| goto err; |
| |
| /* transmission parameters */ |
| auto_mode = false; |
| memset(buf, 0, 3); |
| |
| switch (c->transmission_mode) { |
| case TRANSMISSION_MODE_AUTO: |
| auto_mode = true; |
| break; |
| case TRANSMISSION_MODE_2K: |
| break; |
| case TRANSMISSION_MODE_8K: |
| buf[0] |= (1 << 0); |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid transmission_mode\n"); |
| auto_mode = true; |
| } |
| |
| switch (c->guard_interval) { |
| case GUARD_INTERVAL_AUTO: |
| auto_mode = true; |
| break; |
| case GUARD_INTERVAL_1_32: |
| break; |
| case GUARD_INTERVAL_1_16: |
| buf[0] |= (1 << 2); |
| break; |
| case GUARD_INTERVAL_1_8: |
| buf[0] |= (2 << 2); |
| break; |
| case GUARD_INTERVAL_1_4: |
| buf[0] |= (3 << 2); |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid guard_interval\n"); |
| auto_mode = true; |
| } |
| |
| switch (c->hierarchy) { |
| case HIERARCHY_AUTO: |
| auto_mode = true; |
| break; |
| case HIERARCHY_NONE: |
| break; |
| case HIERARCHY_1: |
| buf[0] |= (1 << 4); |
| break; |
| case HIERARCHY_2: |
| buf[0] |= (2 << 4); |
| break; |
| case HIERARCHY_4: |
| buf[0] |= (3 << 4); |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid hierarchy\n"); |
| auto_mode = true; |
| } |
| |
| switch (c->modulation) { |
| case QAM_AUTO: |
| auto_mode = true; |
| break; |
| case QPSK: |
| break; |
| case QAM_16: |
| buf[1] |= (1 << 6); |
| break; |
| case QAM_64: |
| buf[1] |= (2 << 6); |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid modulation\n"); |
| auto_mode = true; |
| } |
| |
| /* Use HP. How and which case we can switch to LP? */ |
| buf[1] |= (1 << 4); |
| |
| switch (c->code_rate_HP) { |
| case FEC_AUTO: |
| auto_mode = true; |
| break; |
| case FEC_1_2: |
| break; |
| case FEC_2_3: |
| buf[2] |= (1 << 0); |
| break; |
| case FEC_3_4: |
| buf[2] |= (2 << 0); |
| break; |
| case FEC_5_6: |
| buf[2] |= (3 << 0); |
| break; |
| case FEC_7_8: |
| buf[2] |= (4 << 0); |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid code_rate_HP\n"); |
| auto_mode = true; |
| } |
| |
| switch (c->code_rate_LP) { |
| case FEC_AUTO: |
| auto_mode = true; |
| break; |
| case FEC_1_2: |
| break; |
| case FEC_2_3: |
| buf[2] |= (1 << 3); |
| break; |
| case FEC_3_4: |
| buf[2] |= (2 << 3); |
| break; |
| case FEC_5_6: |
| buf[2] |= (3 << 3); |
| break; |
| case FEC_7_8: |
| buf[2] |= (4 << 3); |
| break; |
| case FEC_NONE: |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid code_rate_LP\n"); |
| auto_mode = true; |
| } |
| |
| switch (c->bandwidth_hz) { |
| case 6000000: |
| break; |
| case 7000000: |
| buf[1] |= (1 << 2); |
| break; |
| case 8000000: |
| buf[1] |= (2 << 2); |
| break; |
| default: |
| dev_dbg(&client->dev, "invalid bandwidth_hz\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = regmap_bulk_write(state->regmap, 0xd3c0, buf, 3); |
| if (ret) |
| goto err; |
| |
| if (auto_mode) { |
| /* clear easy mode flag */ |
| ret = regmap_write(state->regmap, 0xaefd, 0x00); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&client->dev, "auto params\n"); |
| } else { |
| /* set easy mode flag */ |
| ret = regmap_write(state->regmap, 0xaefd, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(state->regmap, 0xaefe, 0x00); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&client->dev, "manual params\n"); |
| } |
| |
| /* Reset FSM */ |
| ret = regmap_write(state->regmap, 0xffff, 0x00); |
| if (ret) |
| goto err; |
| |
| state->bandwidth_hz = c->bandwidth_hz; |
| state->set_frontend_jiffies = jiffies; |
| state->first_tune = false; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_get_frontend(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *c) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| int ret; |
| u8 buf[3]; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| ret = regmap_bulk_read(state->regmap, 0xd3c0, buf, 3); |
| if (ret) |
| goto err; |
| |
| switch ((buf[1] >> 6) & 3) { |
| case 0: |
| c->modulation = QPSK; |
| break; |
| case 1: |
| c->modulation = QAM_16; |
| break; |
| case 2: |
| c->modulation = QAM_64; |
| break; |
| } |
| |
| switch ((buf[0] >> 0) & 3) { |
| case 0: |
| c->transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| c->transmission_mode = TRANSMISSION_MODE_8K; |
| } |
| |
| switch ((buf[0] >> 2) & 3) { |
| case 0: |
| c->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| c->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| c->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| c->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| } |
| |
| switch ((buf[0] >> 4) & 7) { |
| case 0: |
| c->hierarchy = HIERARCHY_NONE; |
| break; |
| case 1: |
| c->hierarchy = HIERARCHY_1; |
| break; |
| case 2: |
| c->hierarchy = HIERARCHY_2; |
| break; |
| case 3: |
| c->hierarchy = HIERARCHY_4; |
| break; |
| } |
| |
| switch ((buf[2] >> 0) & 7) { |
| case 0: |
| c->code_rate_HP = FEC_1_2; |
| break; |
| case 1: |
| c->code_rate_HP = FEC_2_3; |
| break; |
| case 2: |
| c->code_rate_HP = FEC_3_4; |
| break; |
| case 3: |
| c->code_rate_HP = FEC_5_6; |
| break; |
| case 4: |
| c->code_rate_HP = FEC_7_8; |
| break; |
| } |
| |
| switch ((buf[2] >> 3) & 7) { |
| case 0: |
| c->code_rate_LP = FEC_1_2; |
| break; |
| case 1: |
| c->code_rate_LP = FEC_2_3; |
| break; |
| case 2: |
| c->code_rate_LP = FEC_3_4; |
| break; |
| case 3: |
| c->code_rate_LP = FEC_5_6; |
| break; |
| case 4: |
| c->code_rate_LP = FEC_7_8; |
| break; |
| } |
| |
| switch ((buf[1] >> 2) & 3) { |
| case 0: |
| c->bandwidth_hz = 6000000; |
| break; |
| case 1: |
| c->bandwidth_hz = 7000000; |
| break; |
| case 2: |
| c->bandwidth_hz = 8000000; |
| break; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| int ret; |
| unsigned int utmp; |
| |
| /* |
| * Return status from the cache if it is younger than 2000ms with the |
| * exception of last tune is done during 4000ms. |
| */ |
| if (time_is_after_jiffies( |
| state->read_status_jiffies + msecs_to_jiffies(2000)) && |
| time_is_before_jiffies( |
| state->set_frontend_jiffies + msecs_to_jiffies(4000)) |
| ) { |
| *status = state->fe_status; |
| return 0; |
| } else { |
| *status = 0; |
| } |
| |
| /* MPEG2 lock */ |
| ret = regmap_read(state->regmap, 0xd507, &utmp); |
| if (ret) |
| goto err; |
| |
| if ((utmp >> 6) & 0x01) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | |
| FE_HAS_SYNC | FE_HAS_LOCK; |
| |
| if (!*status) { |
| /* TPS lock */ |
| ret = regmap_read(state->regmap, 0xd330, &utmp); |
| if (ret) |
| goto err; |
| |
| if ((utmp >> 3) & 0x01) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI; |
| } |
| |
| state->fe_status = *status; |
| state->read_status_jiffies = jiffies; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| *snr = state->snr; |
| return 0; |
| } |
| |
| static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| *strength = state->signal_strength; |
| return 0; |
| } |
| |
| static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| *ber = state->ber; |
| return 0; |
| } |
| |
| static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| *ucblocks = state->ucblocks; |
| return 0; |
| } |
| |
| static int af9013_init(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| int ret, i, len; |
| unsigned int utmp; |
| u8 buf[3]; |
| const struct af9013_reg_bit *init; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* ADC on */ |
| ret = regmap_update_bits(state->regmap, 0xd73a, 0x08, 0x00); |
| if (ret) |
| goto err; |
| |
| /* Clear reset */ |
| ret = regmap_update_bits(state->regmap, 0xd417, 0x02, 0x00); |
| if (ret) |
| goto err; |
| |
| /* Disable reset */ |
| ret = regmap_update_bits(state->regmap, 0xd417, 0x10, 0x00); |
| if (ret) |
| goto err; |
| |
| /* write API version to firmware */ |
| ret = regmap_bulk_write(state->regmap, 0x9bf2, state->api_version, 4); |
| if (ret) |
| goto err; |
| |
| /* program ADC control */ |
| switch (state->clk) { |
| case 28800000: /* 28.800 MHz */ |
| utmp = 0; |
| break; |
| case 20480000: /* 20.480 MHz */ |
| utmp = 1; |
| break; |
| case 28000000: /* 28.000 MHz */ |
| utmp = 2; |
| break; |
| case 25000000: /* 25.000 MHz */ |
| utmp = 3; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = regmap_update_bits(state->regmap, 0x9bd2, 0x0f, utmp); |
| if (ret) |
| goto err; |
| |
| utmp = div_u64((u64)state->clk * 0x80000, 1000000); |
| buf[0] = (utmp >> 0) & 0xff; |
| buf[1] = (utmp >> 8) & 0xff; |
| buf[2] = (utmp >> 16) & 0xff; |
| ret = regmap_bulk_write(state->regmap, 0xd180, buf, 3); |
| if (ret) |
| goto err; |
| |
| /* load OFSM settings */ |
| dev_dbg(&client->dev, "load ofsm settings\n"); |
| len = ARRAY_SIZE(ofsm_init); |
| init = ofsm_init; |
| for (i = 0; i < len; i++) { |
| u16 reg = init[i].addr; |
| u8 mask = GENMASK(init[i].pos + init[i].len - 1, init[i].pos); |
| u8 val = init[i].val << init[i].pos; |
| |
| ret = regmap_update_bits(state->regmap, reg, mask, val); |
| if (ret) |
| goto err; |
| } |
| |
| /* load tuner specific settings */ |
| dev_dbg(&client->dev, "load tuner specific settings\n"); |
| switch (state->tuner) { |
| case AF9013_TUNER_MXL5003D: |
| len = ARRAY_SIZE(tuner_init_mxl5003d); |
| init = tuner_init_mxl5003d; |
| break; |
| case AF9013_TUNER_MXL5005D: |
| case AF9013_TUNER_MXL5005R: |
| case AF9013_TUNER_MXL5007T: |
| len = ARRAY_SIZE(tuner_init_mxl5005); |
| init = tuner_init_mxl5005; |
| break; |
| case AF9013_TUNER_ENV77H11D5: |
| len = ARRAY_SIZE(tuner_init_env77h11d5); |
| init = tuner_init_env77h11d5; |
| break; |
| case AF9013_TUNER_MT2060: |
| len = ARRAY_SIZE(tuner_init_mt2060); |
| init = tuner_init_mt2060; |
| break; |
| case AF9013_TUNER_MC44S803: |
| len = ARRAY_SIZE(tuner_init_mc44s803); |
| init = tuner_init_mc44s803; |
| break; |
| case AF9013_TUNER_QT1010: |
| case AF9013_TUNER_QT1010A: |
| len = ARRAY_SIZE(tuner_init_qt1010); |
| init = tuner_init_qt1010; |
| break; |
| case AF9013_TUNER_MT2060_2: |
| len = ARRAY_SIZE(tuner_init_mt2060_2); |
| init = tuner_init_mt2060_2; |
| break; |
| case AF9013_TUNER_TDA18271: |
| case AF9013_TUNER_TDA18218: |
| len = ARRAY_SIZE(tuner_init_tda18271); |
| init = tuner_init_tda18271; |
| break; |
| case AF9013_TUNER_UNKNOWN: |
| default: |
| len = ARRAY_SIZE(tuner_init_unknown); |
| init = tuner_init_unknown; |
| break; |
| } |
| |
| for (i = 0; i < len; i++) { |
| u16 reg = init[i].addr; |
| u8 mask = GENMASK(init[i].pos + init[i].len - 1, init[i].pos); |
| u8 val = init[i].val << init[i].pos; |
| |
| ret = regmap_update_bits(state->regmap, reg, mask, val); |
| if (ret) |
| goto err; |
| } |
| |
| /* TS interface */ |
| if (state->ts_output_pin == 7) |
| utmp = 1 << 3 | state->ts_mode << 1; |
| else |
| utmp = 0 << 3 | state->ts_mode << 1; |
| ret = regmap_update_bits(state->regmap, 0xd500, 0x0e, utmp); |
| if (ret) |
| goto err; |
| |
| /* enable lock led */ |
| ret = regmap_update_bits(state->regmap, 0xd730, 0x01, 0x01); |
| if (ret) |
| goto err; |
| |
| /* check if we support signal strength */ |
| if (!state->signal_strength_en) { |
| ret = regmap_read(state->regmap, 0x9bee, &utmp); |
| if (ret) |
| goto err; |
| |
| state->signal_strength_en = (utmp >> 0) & 0x01; |
| } |
| |
| /* read values needed for signal strength calculation */ |
| if (state->signal_strength_en && !state->rf_50) { |
| ret = regmap_bulk_read(state->regmap, 0x9bbd, &state->rf_50, 1); |
| if (ret) |
| goto err; |
| ret = regmap_bulk_read(state->regmap, 0x9bd0, &state->rf_80, 1); |
| if (ret) |
| goto err; |
| ret = regmap_bulk_read(state->regmap, 0x9be2, &state->if_50, 1); |
| if (ret) |
| goto err; |
| ret = regmap_bulk_read(state->regmap, 0x9be4, &state->if_80, 1); |
| if (ret) |
| goto err; |
| } |
| |
| /* SNR */ |
| ret = regmap_write(state->regmap, 0xd2e2, 0x01); |
| if (ret) |
| goto err; |
| |
| /* BER / UCB */ |
| buf[0] = (10000 >> 0) & 0xff; |
| buf[1] = (10000 >> 8) & 0xff; |
| ret = regmap_bulk_write(state->regmap, 0xd385, buf, 2); |
| if (ret) |
| goto err; |
| |
| /* enable FEC monitor */ |
| ret = regmap_update_bits(state->regmap, 0xd392, 0x02, 0x02); |
| if (ret) |
| goto err; |
| |
| state->first_tune = true; |
| schedule_delayed_work(&state->statistics_work, msecs_to_jiffies(400)); |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_sleep(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| int ret; |
| unsigned int utmp; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* stop statistics polling */ |
| cancel_delayed_work_sync(&state->statistics_work); |
| |
| /* disable lock led */ |
| ret = regmap_update_bits(state->regmap, 0xd730, 0x01, 0x00); |
| if (ret) |
| goto err; |
| |
| /* Enable reset */ |
| ret = regmap_update_bits(state->regmap, 0xd417, 0x10, 0x10); |
| if (ret) |
| goto err; |
| |
| /* Start reset execution */ |
| ret = regmap_write(state->regmap, 0xaeff, 0x01); |
| if (ret) |
| goto err; |
| |
| /* Wait reset performs */ |
| ret = regmap_read_poll_timeout(state->regmap, 0xd417, utmp, |
| (utmp >> 1) & 0x01, 5000, 1000000); |
| if (ret) |
| goto err; |
| |
| if (!((utmp >> 1) & 0x01)) { |
| ret = -ETIMEDOUT; |
| goto err; |
| } |
| |
| /* ADC off */ |
| ret = regmap_update_bits(state->regmap, 0xd73a, 0x08, 0x08); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| int ret; |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| |
| dev_dbg(&client->dev, "enable %d\n", enable); |
| |
| /* gate already open or close */ |
| if (state->i2c_gate_state == enable) |
| return 0; |
| |
| if (state->ts_mode == AF9013_TS_MODE_USB) |
| ret = regmap_update_bits(state->regmap, 0xd417, 0x08, |
| enable << 3); |
| else |
| ret = regmap_update_bits(state->regmap, 0xd607, 0x04, |
| enable << 2); |
| if (ret) |
| goto err; |
| |
| state->i2c_gate_state = enable; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static void af9013_release(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| struct i2c_client *client = state->client; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| i2c_unregister_device(client); |
| } |
| |
| static const struct dvb_frontend_ops af9013_ops; |
| |
| static int af9013_download_firmware(struct af9013_state *state) |
| { |
| struct i2c_client *client = state->client; |
| int ret, i, len, rem; |
| unsigned int utmp; |
| u8 buf[4]; |
| u16 checksum = 0; |
| const struct firmware *firmware; |
| const char *name = AF9013_FIRMWARE; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* Check whether firmware is already running */ |
| ret = regmap_read(state->regmap, 0x98be, &utmp); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&client->dev, "firmware status %02x\n", utmp); |
| |
| if (utmp == 0x0c) |
| return 0; |
| |
| dev_info(&client->dev, "found a '%s' in cold state, will try to load a firmware\n", |
| af9013_ops.info.name); |
| |
| /* Request the firmware, will block and timeout */ |
| ret = request_firmware(&firmware, name, &client->dev); |
| if (ret) { |
| dev_info(&client->dev, "firmware file '%s' not found %d\n", |
| name, ret); |
| goto err; |
| } |
| |
| dev_info(&client->dev, "downloading firmware from file '%s'\n", |
| name); |
| |
| /* Write firmware checksum & size */ |
| for (i = 0; i < firmware->size; i++) |
| checksum += firmware->data[i]; |
| |
| buf[0] = (checksum >> 8) & 0xff; |
| buf[1] = (checksum >> 0) & 0xff; |
| buf[2] = (firmware->size >> 8) & 0xff; |
| buf[3] = (firmware->size >> 0) & 0xff; |
| ret = regmap_bulk_write(state->regmap, 0x50fc, buf, 4); |
| if (ret) |
| goto err_release_firmware; |
| |
| /* Download firmware */ |
| #define LEN_MAX 16 |
| for (rem = firmware->size; rem > 0; rem -= LEN_MAX) { |
| len = min(LEN_MAX, rem); |
| ret = regmap_bulk_write(state->regmap, |
| 0x5100 + firmware->size - rem, |
| &firmware->data[firmware->size - rem], |
| len); |
| if (ret) { |
| dev_err(&client->dev, "firmware download failed %d\n", |
| ret); |
| goto err_release_firmware; |
| } |
| } |
| |
| release_firmware(firmware); |
| |
| /* Boot firmware */ |
| ret = regmap_write(state->regmap, 0xe205, 0x01); |
| if (ret) |
| goto err; |
| |
| /* Check firmware status. 0c=OK, 04=fail */ |
| ret = regmap_read_poll_timeout(state->regmap, 0x98be, utmp, |
| (utmp == 0x0c || utmp == 0x04), |
| 5000, 1000000); |
| if (ret) |
| goto err; |
| |
| dev_dbg(&client->dev, "firmware status %02x\n", utmp); |
| |
| if (utmp == 0x04) { |
| ret = -ENODEV; |
| dev_err(&client->dev, "firmware did not run\n"); |
| goto err; |
| } else if (utmp != 0x0c) { |
| ret = -ENODEV; |
| dev_err(&client->dev, "firmware boot timeout\n"); |
| goto err; |
| } |
| |
| dev_info(&client->dev, "found a '%s' in warm state\n", |
| af9013_ops.info.name); |
| |
| return 0; |
| err_release_firmware: |
| release_firmware(firmware); |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * XXX: That is wrapper to af9013_probe() via driver core in order to provide |
| * proper I2C client for legacy media attach binding. |
| * New users must use I2C client binding directly! |
| */ |
| struct dvb_frontend *af9013_attach(const struct af9013_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct i2c_client *client; |
| struct i2c_board_info board_info; |
| struct af9013_platform_data pdata; |
| |
| pdata.clk = config->clock; |
| pdata.tuner = config->tuner; |
| pdata.if_frequency = config->if_frequency; |
| pdata.ts_mode = config->ts_mode; |
| pdata.ts_output_pin = 7; |
| pdata.spec_inv = config->spec_inv; |
| memcpy(&pdata.api_version, config->api_version, sizeof(pdata.api_version)); |
| memcpy(&pdata.gpio, config->gpio, sizeof(pdata.gpio)); |
| pdata.attach_in_use = true; |
| |
| memset(&board_info, 0, sizeof(board_info)); |
| strlcpy(board_info.type, "af9013", sizeof(board_info.type)); |
| board_info.addr = config->i2c_addr; |
| board_info.platform_data = &pdata; |
| client = i2c_new_device(i2c, &board_info); |
| if (!client || !client->dev.driver) |
| return NULL; |
| |
| return pdata.get_dvb_frontend(client); |
| } |
| EXPORT_SYMBOL(af9013_attach); |
| |
| static const struct dvb_frontend_ops af9013_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = "Afatech AF9013", |
| .frequency_min = 174000000, |
| .frequency_max = 862000000, |
| .frequency_stepsize = 250000, |
| .frequency_tolerance = 0, |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_RECOVER | |
| FE_CAN_MUTE_TS |
| }, |
| |
| .release = af9013_release, |
| |
| .init = af9013_init, |
| .sleep = af9013_sleep, |
| |
| .get_tune_settings = af9013_get_tune_settings, |
| .set_frontend = af9013_set_frontend, |
| .get_frontend = af9013_get_frontend, |
| |
| .read_status = af9013_read_status, |
| .read_snr = af9013_read_snr, |
| .read_signal_strength = af9013_read_signal_strength, |
| .read_ber = af9013_read_ber, |
| .read_ucblocks = af9013_read_ucblocks, |
| |
| .i2c_gate_ctrl = af9013_i2c_gate_ctrl, |
| }; |
| |
| static struct dvb_frontend *af9013_get_dvb_frontend(struct i2c_client *client) |
| { |
| struct af9013_state *state = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| return &state->fe; |
| } |
| |
| /* Own I2C access routines needed for regmap as chip uses extra command byte */ |
| static int af9013_wregs(struct i2c_client *client, u8 cmd, u16 reg, |
| const u8 *val, int len) |
| { |
| int ret; |
| u8 buf[21]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 3 + len, |
| .buf = buf, |
| } |
| }; |
| |
| if (3 + len > sizeof(buf)) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| buf[0] = (reg >> 8) & 0xff; |
| buf[1] = (reg >> 0) & 0xff; |
| buf[2] = cmd; |
| memcpy(&buf[3], val, len); |
| ret = i2c_transfer(client->adapter, msg, 1); |
| if (ret < 0) { |
| goto err; |
| } else if (ret != 1) { |
| ret = -EREMOTEIO; |
| goto err; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_rregs(struct i2c_client *client, u8 cmd, u16 reg, |
| u8 *val, int len) |
| { |
| int ret; |
| u8 buf[3]; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 3, |
| .buf = buf, |
| }, { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = val, |
| } |
| }; |
| |
| buf[0] = (reg >> 8) & 0xff; |
| buf[1] = (reg >> 0) & 0xff; |
| buf[2] = cmd; |
| ret = i2c_transfer(client->adapter, msg, 2); |
| if (ret < 0) { |
| goto err; |
| } else if (ret != 2) { |
| ret = -EREMOTEIO; |
| goto err; |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_regmap_write(void *context, const void *data, size_t count) |
| { |
| struct i2c_client *client = context; |
| struct af9013_state *state = i2c_get_clientdata(client); |
| int ret, i; |
| u8 cmd; |
| u16 reg = ((u8 *)data)[0] << 8|((u8 *)data)[1] << 0; |
| u8 *val = &((u8 *)data)[2]; |
| const unsigned int len = count - 2; |
| |
| if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) { |
| cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|1 << 0; |
| ret = af9013_wregs(client, cmd, reg, val, len); |
| if (ret) |
| goto err; |
| } else if (reg >= 0x5100 && reg < 0x8fff) { |
| /* Firmware download */ |
| cmd = 1 << 7|1 << 6|(len - 1) << 2|1 << 1|1 << 0; |
| ret = af9013_wregs(client, cmd, reg, val, len); |
| if (ret) |
| goto err; |
| } else { |
| cmd = 0 << 7|0 << 6|(1 - 1) << 2|1 << 1|1 << 0; |
| for (i = 0; i < len; i++) { |
| ret = af9013_wregs(client, cmd, reg + i, val + i, 1); |
| if (ret) |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_regmap_read(void *context, const void *reg_buf, |
| size_t reg_size, void *val_buf, size_t val_size) |
| { |
| struct i2c_client *client = context; |
| struct af9013_state *state = i2c_get_clientdata(client); |
| int ret, i; |
| u8 cmd; |
| u16 reg = ((u8 *)reg_buf)[0] << 8|((u8 *)reg_buf)[1] << 0; |
| u8 *val = &((u8 *)val_buf)[0]; |
| const unsigned int len = val_size; |
| |
| if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) { |
| cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|0 << 0; |
| ret = af9013_rregs(client, cmd, reg, val_buf, len); |
| if (ret) |
| goto err; |
| } else { |
| cmd = 0 << 7|0 << 6|(1 - 1) << 2|1 << 1|0 << 0; |
| for (i = 0; i < len; i++) { |
| ret = af9013_rregs(client, cmd, reg + i, val + i, 1); |
| if (ret) |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct af9013_state *state; |
| struct af9013_platform_data *pdata = client->dev.platform_data; |
| struct dtv_frontend_properties *c; |
| int ret, i; |
| u8 firmware_version[4]; |
| static const struct regmap_bus regmap_bus = { |
| .read = af9013_regmap_read, |
| .write = af9013_regmap_write, |
| }; |
| static const struct regmap_config regmap_config = { |
| .reg_bits = 16, |
| .val_bits = 8, |
| }; |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (!state) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| /* Setup the state */ |
| state->client = client; |
| i2c_set_clientdata(client, state); |
| state->clk = pdata->clk; |
| state->tuner = pdata->tuner; |
| state->if_frequency = pdata->if_frequency; |
| state->ts_mode = pdata->ts_mode; |
| state->ts_output_pin = pdata->ts_output_pin; |
| state->spec_inv = pdata->spec_inv; |
| memcpy(&state->api_version, pdata->api_version, sizeof(state->api_version)); |
| memcpy(&state->gpio, pdata->gpio, sizeof(state->gpio)); |
| INIT_DELAYED_WORK(&state->statistics_work, af9013_statistics_work); |
| state->regmap = regmap_init(&client->dev, ®map_bus, client, |
| ®map_config); |
| if (IS_ERR(state->regmap)) { |
| ret = PTR_ERR(state->regmap); |
| goto err_kfree; |
| } |
| |
| /* Download firmware */ |
| if (state->ts_mode != AF9013_TS_MODE_USB) { |
| ret = af9013_download_firmware(state); |
| if (ret) |
| goto err_regmap_exit; |
| } |
| |
| /* Firmware version */ |
| ret = regmap_bulk_read(state->regmap, 0x5103, firmware_version, |
| sizeof(firmware_version)); |
| if (ret) |
| goto err_regmap_exit; |
| |
| /* Set GPIOs */ |
| for (i = 0; i < sizeof(state->gpio); i++) { |
| ret = af9013_set_gpio(state, i, state->gpio[i]); |
| if (ret) |
| goto err_regmap_exit; |
| } |
| |
| /* Create dvb frontend */ |
| memcpy(&state->fe.ops, &af9013_ops, sizeof(state->fe.ops)); |
| if (!pdata->attach_in_use) |
| state->fe.ops.release = NULL; |
| state->fe.demodulator_priv = state; |
| |
| /* Setup callbacks */ |
| pdata->get_dvb_frontend = af9013_get_dvb_frontend; |
| |
| /* Init stats to indicate which stats are supported */ |
| c = &state->fe.dtv_property_cache; |
| c->cnr.len = 1; |
| |
| dev_info(&client->dev, "Afatech AF9013 successfully attached\n"); |
| dev_info(&client->dev, "firmware version: %d.%d.%d.%d\n", |
| firmware_version[0], firmware_version[1], |
| firmware_version[2], firmware_version[3]); |
| return 0; |
| err_regmap_exit: |
| regmap_exit(state->regmap); |
| err_kfree: |
| kfree(state); |
| err: |
| dev_dbg(&client->dev, "failed %d\n", ret); |
| return ret; |
| } |
| |
| static int af9013_remove(struct i2c_client *client) |
| { |
| struct af9013_state *state = i2c_get_clientdata(client); |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* Stop statistics polling */ |
| cancel_delayed_work_sync(&state->statistics_work); |
| |
| regmap_exit(state->regmap); |
| |
| kfree(state); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id af9013_id_table[] = { |
| {"af9013", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, af9013_id_table); |
| |
| static struct i2c_driver af9013_driver = { |
| .driver = { |
| .name = "af9013", |
| .suppress_bind_attrs = true, |
| }, |
| .probe = af9013_probe, |
| .remove = af9013_remove, |
| .id_table = af9013_id_table, |
| }; |
| |
| module_i2c_driver(af9013_driver); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_FIRMWARE(AF9013_FIRMWARE); |