| /* |
| * Copyright (C) 2015 Hisilicon Limited, All Rights Reserved. |
| * Author: Jun Ma <majun258@huawei.com> |
| * Author: Yun Wu <wuyun.wu@huawei.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqchip.h> |
| #include <linux/module.h> |
| #include <linux/msi.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| /* Interrupt numbers per mbigen node supported */ |
| #define IRQS_PER_MBIGEN_NODE 128 |
| |
| /* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */ |
| #define RESERVED_IRQ_PER_MBIGEN_CHIP 64 |
| |
| /* The maximum IRQ pin number of mbigen chip(start from 0) */ |
| #define MAXIMUM_IRQ_PIN_NUM 1407 |
| |
| /** |
| * In mbigen vector register |
| * bit[21:12]: event id value |
| * bit[11:0]: device id |
| */ |
| #define IRQ_EVENT_ID_SHIFT 12 |
| #define IRQ_EVENT_ID_MASK 0x3ff |
| |
| /* register range of each mbigen node */ |
| #define MBIGEN_NODE_OFFSET 0x1000 |
| |
| /* offset of vector register in mbigen node */ |
| #define REG_MBIGEN_VEC_OFFSET 0x200 |
| |
| /** |
| * offset of clear register in mbigen node |
| * This register is used to clear the status |
| * of interrupt |
| */ |
| #define REG_MBIGEN_CLEAR_OFFSET 0xa000 |
| |
| /** |
| * offset of interrupt type register |
| * This register is used to configure interrupt |
| * trigger type |
| */ |
| #define REG_MBIGEN_TYPE_OFFSET 0x0 |
| |
| /** |
| * struct mbigen_device - holds the information of mbigen device. |
| * |
| * @pdev: pointer to the platform device structure of mbigen chip. |
| * @base: mapped address of this mbigen chip. |
| */ |
| struct mbigen_device { |
| struct platform_device *pdev; |
| void __iomem *base; |
| }; |
| |
| static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq) |
| { |
| unsigned int nid, pin; |
| |
| hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; |
| nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; |
| pin = hwirq % IRQS_PER_MBIGEN_NODE; |
| |
| return pin * 4 + nid * MBIGEN_NODE_OFFSET |
| + REG_MBIGEN_VEC_OFFSET; |
| } |
| |
| static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, |
| u32 *mask, u32 *addr) |
| { |
| unsigned int nid, irq_ofst, ofst; |
| |
| hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; |
| nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; |
| irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE; |
| |
| *mask = 1 << (irq_ofst % 32); |
| ofst = irq_ofst / 32 * 4; |
| |
| *addr = ofst + nid * MBIGEN_NODE_OFFSET |
| + REG_MBIGEN_TYPE_OFFSET; |
| } |
| |
| static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq, |
| u32 *mask, u32 *addr) |
| { |
| unsigned int ofst = (hwirq / 32) * 4; |
| |
| *mask = 1 << (hwirq % 32); |
| *addr = ofst + REG_MBIGEN_CLEAR_OFFSET; |
| } |
| |
| static void mbigen_eoi_irq(struct irq_data *data) |
| { |
| void __iomem *base = data->chip_data; |
| u32 mask, addr; |
| |
| get_mbigen_clear_reg(data->hwirq, &mask, &addr); |
| |
| writel_relaxed(mask, base + addr); |
| |
| irq_chip_eoi_parent(data); |
| } |
| |
| static int mbigen_set_type(struct irq_data *data, unsigned int type) |
| { |
| void __iomem *base = data->chip_data; |
| u32 mask, addr, val; |
| |
| if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) |
| return -EINVAL; |
| |
| get_mbigen_type_reg(data->hwirq, &mask, &addr); |
| |
| val = readl_relaxed(base + addr); |
| |
| if (type == IRQ_TYPE_LEVEL_HIGH) |
| val |= mask; |
| else |
| val &= ~mask; |
| |
| writel_relaxed(val, base + addr); |
| |
| return 0; |
| } |
| |
| static struct irq_chip mbigen_irq_chip = { |
| .name = "mbigen-v2", |
| .irq_mask = irq_chip_mask_parent, |
| .irq_unmask = irq_chip_unmask_parent, |
| .irq_eoi = mbigen_eoi_irq, |
| .irq_set_type = mbigen_set_type, |
| .irq_set_affinity = irq_chip_set_affinity_parent, |
| }; |
| |
| static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg) |
| { |
| struct irq_data *d = irq_get_irq_data(desc->irq); |
| void __iomem *base = d->chip_data; |
| u32 val; |
| |
| if (!msg->address_lo && !msg->address_hi) |
| return; |
| |
| base += get_mbigen_vec_reg(d->hwirq); |
| val = readl_relaxed(base); |
| |
| val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT); |
| val |= (msg->data << IRQ_EVENT_ID_SHIFT); |
| |
| /* The address of doorbell is encoded in mbigen register by default |
| * So,we don't need to program the doorbell address at here |
| */ |
| writel_relaxed(val, base); |
| } |
| |
| static int mbigen_domain_translate(struct irq_domain *d, |
| struct irq_fwspec *fwspec, |
| unsigned long *hwirq, |
| unsigned int *type) |
| { |
| if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) { |
| if (fwspec->param_count != 2) |
| return -EINVAL; |
| |
| if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) || |
| (fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP)) |
| return -EINVAL; |
| else |
| *hwirq = fwspec->param[0]; |
| |
| /* If there is no valid irq type, just use the default type */ |
| if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) || |
| (fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH)) |
| *type = fwspec->param[1]; |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int mbigen_irq_domain_alloc(struct irq_domain *domain, |
| unsigned int virq, |
| unsigned int nr_irqs, |
| void *args) |
| { |
| struct irq_fwspec *fwspec = args; |
| irq_hw_number_t hwirq; |
| unsigned int type; |
| struct mbigen_device *mgn_chip; |
| int i, err; |
| |
| err = mbigen_domain_translate(domain, fwspec, &hwirq, &type); |
| if (err) |
| return err; |
| |
| err = platform_msi_domain_alloc(domain, virq, nr_irqs); |
| if (err) |
| return err; |
| |
| mgn_chip = platform_msi_get_host_data(domain); |
| |
| for (i = 0; i < nr_irqs; i++) |
| irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, |
| &mbigen_irq_chip, mgn_chip->base); |
| |
| return 0; |
| } |
| |
| static void mbigen_irq_domain_free(struct irq_domain *domain, unsigned int virq, |
| unsigned int nr_irqs) |
| { |
| platform_msi_domain_free(domain, virq, nr_irqs); |
| } |
| |
| static const struct irq_domain_ops mbigen_domain_ops = { |
| .translate = mbigen_domain_translate, |
| .alloc = mbigen_irq_domain_alloc, |
| .free = mbigen_irq_domain_free, |
| }; |
| |
| static int mbigen_of_create_domain(struct platform_device *pdev, |
| struct mbigen_device *mgn_chip) |
| { |
| struct device *parent; |
| struct platform_device *child; |
| struct irq_domain *domain; |
| struct device_node *np; |
| u32 num_pins; |
| |
| for_each_child_of_node(pdev->dev.of_node, np) { |
| if (!of_property_read_bool(np, "interrupt-controller")) |
| continue; |
| |
| parent = platform_bus_type.dev_root; |
| child = of_platform_device_create(np, NULL, parent); |
| if (!child) |
| return -ENOMEM; |
| |
| if (of_property_read_u32(child->dev.of_node, "num-pins", |
| &num_pins) < 0) { |
| dev_err(&pdev->dev, "No num-pins property\n"); |
| return -EINVAL; |
| } |
| |
| domain = platform_msi_create_device_domain(&child->dev, num_pins, |
| mbigen_write_msg, |
| &mbigen_domain_ops, |
| mgn_chip); |
| if (!domain) |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_ACPI |
| static int mbigen_acpi_create_domain(struct platform_device *pdev, |
| struct mbigen_device *mgn_chip) |
| { |
| struct irq_domain *domain; |
| u32 num_pins = 0; |
| int ret; |
| |
| /* |
| * "num-pins" is the total number of interrupt pins implemented in |
| * this mbigen instance, and mbigen is an interrupt controller |
| * connected to ITS converting wired interrupts into MSI, so we |
| * use "num-pins" to alloc MSI vectors which are needed by client |
| * devices connected to it. |
| * |
| * Here is the DSDT device node used for mbigen in firmware: |
| * Device(MBI0) { |
| * Name(_HID, "HISI0152") |
| * Name(_UID, Zero) |
| * Name(_CRS, ResourceTemplate() { |
| * Memory32Fixed(ReadWrite, 0xa0080000, 0x10000) |
| * }) |
| * |
| * Name(_DSD, Package () { |
| * ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), |
| * Package () { |
| * Package () {"num-pins", 378} |
| * } |
| * }) |
| * } |
| */ |
| ret = device_property_read_u32(&pdev->dev, "num-pins", &num_pins); |
| if (ret || num_pins == 0) |
| return -EINVAL; |
| |
| domain = platform_msi_create_device_domain(&pdev->dev, num_pins, |
| mbigen_write_msg, |
| &mbigen_domain_ops, |
| mgn_chip); |
| if (!domain) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| #else |
| static inline int mbigen_acpi_create_domain(struct platform_device *pdev, |
| struct mbigen_device *mgn_chip) |
| { |
| return -ENODEV; |
| } |
| #endif |
| |
| static int mbigen_device_probe(struct platform_device *pdev) |
| { |
| struct mbigen_device *mgn_chip; |
| struct resource *res; |
| int err; |
| |
| mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL); |
| if (!mgn_chip) |
| return -ENOMEM; |
| |
| mgn_chip->pdev = pdev; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -EINVAL; |
| |
| mgn_chip->base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!mgn_chip->base) { |
| dev_err(&pdev->dev, "failed to ioremap %pR\n", res); |
| return -ENOMEM; |
| } |
| |
| if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) |
| err = mbigen_of_create_domain(pdev, mgn_chip); |
| else if (ACPI_COMPANION(&pdev->dev)) |
| err = mbigen_acpi_create_domain(pdev, mgn_chip); |
| else |
| err = -EINVAL; |
| |
| if (err) { |
| dev_err(&pdev->dev, "Failed to create mbi-gen@%p irqdomain", |
| mgn_chip->base); |
| return err; |
| } |
| |
| platform_set_drvdata(pdev, mgn_chip); |
| return 0; |
| } |
| |
| static const struct of_device_id mbigen_of_match[] = { |
| { .compatible = "hisilicon,mbigen-v2" }, |
| { /* END */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mbigen_of_match); |
| |
| static const struct acpi_device_id mbigen_acpi_match[] = { |
| { "HISI0152", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match); |
| |
| static struct platform_driver mbigen_platform_driver = { |
| .driver = { |
| .name = "Hisilicon MBIGEN-V2", |
| .of_match_table = mbigen_of_match, |
| .acpi_match_table = ACPI_PTR(mbigen_acpi_match), |
| .suppress_bind_attrs = true, |
| }, |
| .probe = mbigen_device_probe, |
| }; |
| |
| module_platform_driver(mbigen_platform_driver); |
| |
| MODULE_AUTHOR("Jun Ma <majun258@huawei.com>"); |
| MODULE_AUTHOR("Yun Wu <wuyun.wu@huawei.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Hisilicon MBI Generator driver"); |