| /* |
| * Driver for Semtech SX8654 I2C touchscreen controller. |
| * |
| * Copyright (c) 2015 Armadeus Systems |
| * Sébastien Szymanski <sebastien.szymanski@armadeus.com> |
| * |
| * Using code from: |
| * - sx865x.c |
| * Copyright (c) 2013 U-MoBo Srl |
| * Pierluigi Passaro <p.passaro@u-mobo.com> |
| * - sx8650.c |
| * Copyright (c) 2009 Wayne Roberts |
| * - tsc2007.c |
| * Copyright (c) 2008 Kwangwoo Lee |
| * - ads7846.c |
| * Copyright (c) 2005 David Brownell |
| * Copyright (c) 2006 Nokia Corporation |
| * - corgi_ts.c |
| * Copyright (C) 2004-2005 Richard Purdie |
| * - omap_ts.[hc], ads7846.h, ts_osk.c |
| * Copyright (C) 2002 MontaVista Software |
| * Copyright (C) 2004 Texas Instruments |
| * Copyright (C) 2005 Dirk Behme |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/input.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| |
| /* register addresses */ |
| #define I2C_REG_TOUCH0 0x00 |
| #define I2C_REG_TOUCH1 0x01 |
| #define I2C_REG_CHANMASK 0x04 |
| #define I2C_REG_IRQMASK 0x22 |
| #define I2C_REG_IRQSRC 0x23 |
| #define I2C_REG_SOFTRESET 0x3f |
| |
| /* commands */ |
| #define CMD_READ_REGISTER 0x40 |
| #define CMD_MANUAL 0xc0 |
| #define CMD_PENTRG 0xe0 |
| |
| /* value for I2C_REG_SOFTRESET */ |
| #define SOFTRESET_VALUE 0xde |
| |
| /* bits for I2C_REG_IRQSRC */ |
| #define IRQ_PENTOUCH_TOUCHCONVDONE 0x08 |
| #define IRQ_PENRELEASE 0x04 |
| |
| /* bits for RegTouch1 */ |
| #define CONDIRQ 0x20 |
| #define FILT_7SA 0x03 |
| |
| /* bits for I2C_REG_CHANMASK */ |
| #define CONV_X 0x80 |
| #define CONV_Y 0x40 |
| |
| /* coordinates rate: higher nibble of CTRL0 register */ |
| #define RATE_MANUAL 0x00 |
| #define RATE_5000CPS 0xf0 |
| |
| /* power delay: lower nibble of CTRL0 register */ |
| #define POWDLY_1_1MS 0x0b |
| |
| #define MAX_12BIT ((1 << 12) - 1) |
| |
| struct sx8654 { |
| struct input_dev *input; |
| struct i2c_client *client; |
| }; |
| |
| static irqreturn_t sx8654_irq(int irq, void *handle) |
| { |
| struct sx8654 *sx8654 = handle; |
| int irqsrc; |
| u8 data[4]; |
| unsigned int x, y; |
| int retval; |
| |
| irqsrc = i2c_smbus_read_byte_data(sx8654->client, |
| CMD_READ_REGISTER | I2C_REG_IRQSRC); |
| dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc); |
| |
| if (irqsrc < 0) |
| goto out; |
| |
| if (irqsrc & IRQ_PENRELEASE) { |
| dev_dbg(&sx8654->client->dev, "pen release interrupt"); |
| |
| input_report_key(sx8654->input, BTN_TOUCH, 0); |
| input_sync(sx8654->input); |
| } |
| |
| if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) { |
| dev_dbg(&sx8654->client->dev, "pen touch interrupt"); |
| |
| retval = i2c_master_recv(sx8654->client, data, sizeof(data)); |
| if (retval != sizeof(data)) |
| goto out; |
| |
| /* invalid data */ |
| if (unlikely(data[0] & 0x80 || data[2] & 0x80)) |
| goto out; |
| |
| x = ((data[0] & 0xf) << 8) | (data[1]); |
| y = ((data[2] & 0xf) << 8) | (data[3]); |
| |
| input_report_abs(sx8654->input, ABS_X, x); |
| input_report_abs(sx8654->input, ABS_Y, y); |
| input_report_key(sx8654->input, BTN_TOUCH, 1); |
| input_sync(sx8654->input); |
| |
| dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y); |
| } |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static int sx8654_open(struct input_dev *dev) |
| { |
| struct sx8654 *sx8654 = input_get_drvdata(dev); |
| struct i2c_client *client = sx8654->client; |
| int error; |
| |
| /* enable pen trigger mode */ |
| error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, |
| RATE_5000CPS | POWDLY_1_1MS); |
| if (error) { |
| dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); |
| return error; |
| } |
| |
| error = i2c_smbus_write_byte(client, CMD_PENTRG); |
| if (error) { |
| dev_err(&client->dev, "writing command CMD_PENTRG failed"); |
| return error; |
| } |
| |
| enable_irq(client->irq); |
| |
| return 0; |
| } |
| |
| static void sx8654_close(struct input_dev *dev) |
| { |
| struct sx8654 *sx8654 = input_get_drvdata(dev); |
| struct i2c_client *client = sx8654->client; |
| int error; |
| |
| disable_irq(client->irq); |
| |
| /* enable manual mode mode */ |
| error = i2c_smbus_write_byte(client, CMD_MANUAL); |
| if (error) { |
| dev_err(&client->dev, "writing command CMD_MANUAL failed"); |
| return; |
| } |
| |
| error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0); |
| if (error) { |
| dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); |
| return; |
| } |
| } |
| |
| static int sx8654_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct sx8654 *sx8654; |
| struct input_dev *input; |
| int error; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_WORD_DATA)) |
| return -ENXIO; |
| |
| sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL); |
| if (!sx8654) |
| return -ENOMEM; |
| |
| input = devm_input_allocate_device(&client->dev); |
| if (!input) |
| return -ENOMEM; |
| |
| input->name = "SX8654 I2C Touchscreen"; |
| input->id.bustype = BUS_I2C; |
| input->dev.parent = &client->dev; |
| input->open = sx8654_open; |
| input->close = sx8654_close; |
| |
| __set_bit(INPUT_PROP_DIRECT, input->propbit); |
| input_set_capability(input, EV_KEY, BTN_TOUCH); |
| input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0); |
| input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0); |
| |
| sx8654->client = client; |
| sx8654->input = input; |
| |
| input_set_drvdata(sx8654->input, sx8654); |
| |
| error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET, |
| SOFTRESET_VALUE); |
| if (error) { |
| dev_err(&client->dev, "writing softreset value failed"); |
| return error; |
| } |
| |
| error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK, |
| CONV_X | CONV_Y); |
| if (error) { |
| dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed"); |
| return error; |
| } |
| |
| error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK, |
| IRQ_PENTOUCH_TOUCHCONVDONE | |
| IRQ_PENRELEASE); |
| if (error) { |
| dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed"); |
| return error; |
| } |
| |
| error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1, |
| CONDIRQ | FILT_7SA); |
| if (error) { |
| dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed"); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, sx8654_irq, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| client->name, sx8654); |
| if (error) { |
| dev_err(&client->dev, |
| "Failed to enable IRQ %d, error: %d\n", |
| client->irq, error); |
| return error; |
| } |
| |
| /* Disable the IRQ, we'll enable it in sx8654_open() */ |
| disable_irq(client->irq); |
| |
| error = input_register_device(sx8654->input); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id sx8654_of_match[] = { |
| { .compatible = "semtech,sx8654", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, sx8654_of_match); |
| #endif |
| |
| static const struct i2c_device_id sx8654_id_table[] = { |
| { "semtech_sx8654", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, sx8654_id_table); |
| |
| static struct i2c_driver sx8654_driver = { |
| .driver = { |
| .name = "sx8654", |
| .of_match_table = of_match_ptr(sx8654_of_match), |
| }, |
| .id_table = sx8654_id_table, |
| .probe = sx8654_probe, |
| }; |
| module_i2c_driver(sx8654_driver); |
| |
| MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>"); |
| MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver"); |
| MODULE_LICENSE("GPL"); |