| /* |
| * tsys01.c - Support for Measurement-Specialties tsys01 temperature sensor |
| * |
| * Copyright (c) 2015 Measurement-Specialties |
| * |
| * Licensed under the GPL-2. |
| * |
| * Datasheet: |
| * http://www.meas-spec.com/downloads/TSYS01_Digital_Temperature_Sensor.pdf |
| */ |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/device.h> |
| #include <linux/mutex.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/stat.h> |
| #include "../common/ms_sensors/ms_sensors_i2c.h" |
| |
| /* TSYS01 Commands */ |
| #define TSYS01_RESET 0x1E |
| #define TSYS01_CONVERSION_START 0x48 |
| #define TSYS01_ADC_READ 0x00 |
| #define TSYS01_PROM_READ 0xA0 |
| |
| #define TSYS01_PROM_WORDS_NB 8 |
| |
| struct tsys01_dev { |
| void *client; |
| struct mutex lock; /* lock during conversion */ |
| |
| int (*reset)(void *cli, u8 cmd, unsigned int delay); |
| int (*convert_and_read)(void *cli, u8 conv, u8 rd, |
| unsigned int delay, u32 *adc); |
| int (*read_prom_word)(void *cli, int cmd, u16 *word); |
| |
| u16 prom[TSYS01_PROM_WORDS_NB]; |
| }; |
| |
| /* Multiplication coefficients for temperature computation */ |
| static const int coeff_mul[] = { -1500000, 1000000, -2000000, |
| 4000000, -2000000 }; |
| |
| static int tsys01_read_temperature(struct iio_dev *indio_dev, |
| s32 *temperature) |
| { |
| int ret, i; |
| u32 adc; |
| s64 temp = 0; |
| struct tsys01_dev *dev_data = iio_priv(indio_dev); |
| |
| mutex_lock(&dev_data->lock); |
| ret = dev_data->convert_and_read(dev_data->client, |
| TSYS01_CONVERSION_START, |
| TSYS01_ADC_READ, 9000, &adc); |
| mutex_unlock(&dev_data->lock); |
| if (ret) |
| return ret; |
| |
| adc >>= 8; |
| |
| /* Temperature algorithm */ |
| for (i = 4; i > 0; i--) { |
| temp += coeff_mul[i] * |
| (s64)dev_data->prom[5 - i]; |
| temp *= (s64)adc; |
| temp = div64_s64(temp, 100000); |
| } |
| temp *= 10; |
| temp += coeff_mul[0] * (s64)dev_data->prom[5]; |
| temp = div64_s64(temp, 100000); |
| |
| *temperature = temp; |
| |
| return 0; |
| } |
| |
| static int tsys01_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *channel, int *val, |
| int *val2, long mask) |
| { |
| int ret; |
| s32 temperature; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_PROCESSED: |
| switch (channel->type) { |
| case IIO_TEMP: /* in milli °C */ |
| ret = tsys01_read_temperature(indio_dev, &temperature); |
| if (ret) |
| return ret; |
| *val = temperature; |
| |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_chan_spec tsys01_channels[] = { |
| { |
| .type = IIO_TEMP, |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_PROCESSED), |
| } |
| }; |
| |
| static const struct iio_info tsys01_info = { |
| .read_raw = tsys01_read_raw, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static bool tsys01_crc_valid(u16 *n_prom) |
| { |
| u8 cnt; |
| u8 sum = 0; |
| |
| for (cnt = 0; cnt < TSYS01_PROM_WORDS_NB; cnt++) |
| sum += ((n_prom[0] >> 8) + (n_prom[0] & 0xFF)); |
| |
| return (sum == 0); |
| } |
| |
| static int tsys01_read_prom(struct iio_dev *indio_dev) |
| { |
| int i, ret; |
| struct tsys01_dev *dev_data = iio_priv(indio_dev); |
| char buf[7 * TSYS01_PROM_WORDS_NB + 1]; |
| char *ptr = buf; |
| |
| for (i = 0; i < TSYS01_PROM_WORDS_NB; i++) { |
| ret = dev_data->read_prom_word(dev_data->client, |
| TSYS01_PROM_READ + (i << 1), |
| &dev_data->prom[i]); |
| if (ret) |
| return ret; |
| |
| ret = sprintf(ptr, "0x%04x ", dev_data->prom[i]); |
| ptr += ret; |
| } |
| |
| if (!tsys01_crc_valid(dev_data->prom)) { |
| dev_err(&indio_dev->dev, "prom crc check error\n"); |
| return -ENODEV; |
| } |
| *ptr = 0; |
| dev_info(&indio_dev->dev, "PROM coefficients : %s\n", buf); |
| |
| return 0; |
| } |
| |
| static int tsys01_probe(struct iio_dev *indio_dev, struct device *dev) |
| { |
| int ret; |
| struct tsys01_dev *dev_data = iio_priv(indio_dev); |
| |
| mutex_init(&dev_data->lock); |
| |
| indio_dev->info = &tsys01_info; |
| indio_dev->name = dev->driver->name; |
| indio_dev->dev.parent = dev; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = tsys01_channels; |
| indio_dev->num_channels = ARRAY_SIZE(tsys01_channels); |
| |
| ret = dev_data->reset(dev_data->client, TSYS01_RESET, 3000); |
| if (ret) |
| return ret; |
| |
| ret = tsys01_read_prom(indio_dev); |
| if (ret) |
| return ret; |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| |
| static int tsys01_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct tsys01_dev *dev_data; |
| struct iio_dev *indio_dev; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_WORD_DATA | |
| I2C_FUNC_SMBUS_WRITE_BYTE | |
| I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { |
| dev_err(&client->dev, |
| "Adapter does not support some i2c transaction\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| dev_data = iio_priv(indio_dev); |
| dev_data->client = client; |
| dev_data->reset = ms_sensors_reset; |
| dev_data->read_prom_word = ms_sensors_read_prom_word; |
| dev_data->convert_and_read = ms_sensors_convert_and_read; |
| |
| i2c_set_clientdata(client, indio_dev); |
| |
| return tsys01_probe(indio_dev, &client->dev); |
| } |
| |
| static const struct i2c_device_id tsys01_id[] = { |
| {"tsys01", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, tsys01_id); |
| |
| static const struct of_device_id tsys01_of_match[] = { |
| { .compatible = "meas,tsys01", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, tsys01_of_match); |
| |
| static struct i2c_driver tsys01_driver = { |
| .probe = tsys01_i2c_probe, |
| .id_table = tsys01_id, |
| .driver = { |
| .name = "tsys01", |
| .of_match_table = of_match_ptr(tsys01_of_match), |
| }, |
| }; |
| |
| module_i2c_driver(tsys01_driver); |
| |
| MODULE_DESCRIPTION("Measurement-Specialties tsys01 temperature driver"); |
| MODULE_AUTHOR("William Markezana <william.markezana@meas-spec.com>"); |
| MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@maplehightech.com>"); |
| MODULE_LICENSE("GPL v2"); |