| /* |
| * TI tlc4541 ADC Driver |
| * |
| * Copyright (C) 2017 Phil Reid |
| * |
| * Datasheets can be found here: |
| * http://www.ti.com/lit/gpn/tlc3541 |
| * http://www.ti.com/lit/gpn/tlc4541 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * The tlc4541 requires 24 clock cycles to start a transfer. |
| * Conversion then takes 2.94us to complete before data is ready |
| * Data is returned MSB first. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| #include <linux/sysfs.h> |
| |
| struct tlc4541_state { |
| struct spi_device *spi; |
| struct regulator *reg; |
| struct spi_transfer scan_single_xfer[3]; |
| struct spi_message scan_single_msg; |
| |
| /* |
| * DMA (thus cache coherency maintenance) requires the |
| * transfer buffers to live in their own cache lines. |
| * 2 bytes data + 6 bytes padding + 8 bytes timestamp when |
| * call iio_push_to_buffers_with_timestamp. |
| */ |
| __be16 rx_buf[8] ____cacheline_aligned; |
| }; |
| |
| struct tlc4541_chip_info { |
| const struct iio_chan_spec *channels; |
| unsigned int num_channels; |
| }; |
| |
| enum tlc4541_id { |
| TLC3541, |
| TLC4541, |
| }; |
| |
| #define TLC4541_V_CHAN(bits, bitshift) { \ |
| .type = IIO_VOLTAGE, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = (bits), \ |
| .storagebits = 16, \ |
| .shift = (bitshift), \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| #define DECLARE_TLC4541_CHANNELS(name, bits, bitshift) \ |
| const struct iio_chan_spec name ## _channels[] = { \ |
| TLC4541_V_CHAN(bits, bitshift), \ |
| IIO_CHAN_SOFT_TIMESTAMP(1), \ |
| } |
| |
| static DECLARE_TLC4541_CHANNELS(tlc3541, 14, 2); |
| static DECLARE_TLC4541_CHANNELS(tlc4541, 16, 0); |
| |
| static const struct tlc4541_chip_info tlc4541_chip_info[] = { |
| [TLC3541] = { |
| .channels = tlc3541_channels, |
| .num_channels = ARRAY_SIZE(tlc3541_channels), |
| }, |
| [TLC4541] = { |
| .channels = tlc4541_channels, |
| .num_channels = ARRAY_SIZE(tlc4541_channels), |
| }, |
| }; |
| |
| static irqreturn_t tlc4541_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct tlc4541_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| ret = spi_sync(st->spi, &st->scan_single_msg); |
| if (ret < 0) |
| goto done; |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf, |
| iio_get_time_ns(indio_dev)); |
| |
| done: |
| iio_trigger_notify_done(indio_dev->trig); |
| return IRQ_HANDLED; |
| } |
| |
| static int tlc4541_get_range(struct tlc4541_state *st) |
| { |
| int vref; |
| |
| vref = regulator_get_voltage(st->reg); |
| if (vref < 0) |
| return vref; |
| |
| vref /= 1000; |
| |
| return vref; |
| } |
| |
| static int tlc4541_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long m) |
| { |
| int ret = 0; |
| struct tlc4541_state *st = iio_priv(indio_dev); |
| |
| switch (m) { |
| case IIO_CHAN_INFO_RAW: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| ret = spi_sync(st->spi, &st->scan_single_msg); |
| iio_device_release_direct_mode(indio_dev); |
| if (ret < 0) |
| return ret; |
| *val = be16_to_cpu(st->rx_buf[0]); |
| *val = *val >> chan->scan_type.shift; |
| *val &= GENMASK(chan->scan_type.realbits - 1, 0); |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| ret = tlc4541_get_range(st); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| *val2 = chan->scan_type.realbits; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| } |
| return -EINVAL; |
| } |
| |
| static const struct iio_info tlc4541_info = { |
| .read_raw = &tlc4541_read_raw, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static int tlc4541_probe(struct spi_device *spi) |
| { |
| struct tlc4541_state *st; |
| struct iio_dev *indio_dev; |
| const struct tlc4541_chip_info *info; |
| int ret; |
| int8_t device_init = 0; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| if (indio_dev == NULL) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| |
| spi_set_drvdata(spi, indio_dev); |
| |
| st->spi = spi; |
| |
| info = &tlc4541_chip_info[spi_get_device_id(spi)->driver_data]; |
| |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->dev.parent = &spi->dev; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = info->channels; |
| indio_dev->num_channels = info->num_channels; |
| indio_dev->info = &tlc4541_info; |
| |
| /* perform reset */ |
| spi_write(spi, &device_init, 1); |
| |
| /* Setup default message */ |
| st->scan_single_xfer[0].rx_buf = &st->rx_buf[0]; |
| st->scan_single_xfer[0].len = 3; |
| st->scan_single_xfer[1].delay_usecs = 3; |
| st->scan_single_xfer[2].rx_buf = &st->rx_buf[0]; |
| st->scan_single_xfer[2].len = 2; |
| |
| spi_message_init_with_transfers(&st->scan_single_msg, |
| st->scan_single_xfer, 3); |
| |
| st->reg = devm_regulator_get(&spi->dev, "vref"); |
| if (IS_ERR(st->reg)) |
| return PTR_ERR(st->reg); |
| |
| ret = regulator_enable(st->reg); |
| if (ret) |
| return ret; |
| |
| ret = iio_triggered_buffer_setup(indio_dev, NULL, |
| &tlc4541_trigger_handler, NULL); |
| if (ret) |
| goto error_disable_reg; |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) |
| goto error_cleanup_buffer; |
| |
| return 0; |
| |
| error_cleanup_buffer: |
| iio_triggered_buffer_cleanup(indio_dev); |
| error_disable_reg: |
| regulator_disable(st->reg); |
| |
| return ret; |
| } |
| |
| static int tlc4541_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct tlc4541_state *st = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| iio_triggered_buffer_cleanup(indio_dev); |
| regulator_disable(st->reg); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id tlc4541_dt_ids[] = { |
| { .compatible = "ti,tlc3541", }, |
| { .compatible = "ti,tlc4541", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, tlc4541_dt_ids); |
| #endif |
| |
| static const struct spi_device_id tlc4541_id[] = { |
| {"tlc3541", TLC3541}, |
| {"tlc4541", TLC4541}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(spi, tlc4541_id); |
| |
| static struct spi_driver tlc4541_driver = { |
| .driver = { |
| .name = "tlc4541", |
| .of_match_table = of_match_ptr(tlc4541_dt_ids), |
| }, |
| .probe = tlc4541_probe, |
| .remove = tlc4541_remove, |
| .id_table = tlc4541_id, |
| }; |
| module_spi_driver(tlc4541_driver); |
| |
| MODULE_AUTHOR("Phil Reid <preid@electromag.com.au>"); |
| MODULE_DESCRIPTION("Texas Instruments TLC4541 ADC"); |
| MODULE_LICENSE("GPL v2"); |