| /* |
| * Copyright (C) 2017 Sanechips Technology Co., Ltd. |
| * Copyright 2017 Linaro Ltd. |
| * |
| * Author: Baoyou Xie <baoyou.xie@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #define REG_CMD 0x04 |
| #define REG_DEVADDR_H 0x0C |
| #define REG_DEVADDR_L 0x10 |
| #define REG_CLK_DIV_FS 0x14 |
| #define REG_CLK_DIV_HS 0x18 |
| #define REG_WRCONF 0x1C |
| #define REG_RDCONF 0x20 |
| #define REG_DATA 0x24 |
| #define REG_STAT 0x28 |
| |
| #define I2C_STOP 0 |
| #define I2C_MASTER BIT(0) |
| #define I2C_ADDR_MODE_TEN BIT(1) |
| #define I2C_IRQ_MSK_ENABLE BIT(3) |
| #define I2C_RW_READ BIT(4) |
| #define I2C_CMB_RW_EN BIT(5) |
| #define I2C_START BIT(6) |
| |
| #define I2C_ADDR_LOW_MASK GENMASK(6, 0) |
| #define I2C_ADDR_LOW_SHIFT 0 |
| #define I2C_ADDR_HI_MASK GENMASK(2, 0) |
| #define I2C_ADDR_HI_SHIFT 7 |
| |
| #define I2C_WFIFO_RESET BIT(7) |
| #define I2C_RFIFO_RESET BIT(7) |
| |
| #define I2C_IRQ_ACK_CLEAR BIT(7) |
| #define I2C_INT_MASK GENMASK(6, 0) |
| |
| #define I2C_TRANS_DONE BIT(0) |
| #define I2C_SR_EDEVICE BIT(1) |
| #define I2C_SR_EDATA BIT(2) |
| |
| #define I2C_FIFO_MAX 16 |
| |
| #define I2C_TIMEOUT msecs_to_jiffies(1000) |
| |
| #define DEV(i2c) ((i2c)->adap.dev.parent) |
| |
| struct zx2967_i2c { |
| struct i2c_adapter adap; |
| struct clk *clk; |
| struct completion complete; |
| u32 clk_freq; |
| void __iomem *reg_base; |
| size_t residue; |
| int irq; |
| int msg_rd; |
| u8 *cur_trans; |
| u8 access_cnt; |
| bool is_suspended; |
| int error; |
| }; |
| |
| static void zx2967_i2c_writel(struct zx2967_i2c *i2c, |
| u32 val, unsigned long reg) |
| { |
| writel_relaxed(val, i2c->reg_base + reg); |
| } |
| |
| static u32 zx2967_i2c_readl(struct zx2967_i2c *i2c, unsigned long reg) |
| { |
| return readl_relaxed(i2c->reg_base + reg); |
| } |
| |
| static void zx2967_i2c_writesb(struct zx2967_i2c *i2c, |
| void *data, unsigned long reg, int len) |
| { |
| writesb(i2c->reg_base + reg, data, len); |
| } |
| |
| static void zx2967_i2c_readsb(struct zx2967_i2c *i2c, |
| void *data, unsigned long reg, int len) |
| { |
| readsb(i2c->reg_base + reg, data, len); |
| } |
| |
| static void zx2967_i2c_start_ctrl(struct zx2967_i2c *i2c) |
| { |
| u32 status; |
| u32 ctl; |
| |
| status = zx2967_i2c_readl(i2c, REG_STAT); |
| status |= I2C_IRQ_ACK_CLEAR; |
| zx2967_i2c_writel(i2c, status, REG_STAT); |
| |
| ctl = zx2967_i2c_readl(i2c, REG_CMD); |
| if (i2c->msg_rd) |
| ctl |= I2C_RW_READ; |
| else |
| ctl &= ~I2C_RW_READ; |
| ctl &= ~I2C_CMB_RW_EN; |
| ctl |= I2C_START; |
| zx2967_i2c_writel(i2c, ctl, REG_CMD); |
| } |
| |
| static void zx2967_i2c_flush_fifos(struct zx2967_i2c *i2c) |
| { |
| u32 offset; |
| u32 val; |
| |
| if (i2c->msg_rd) { |
| offset = REG_RDCONF; |
| val = I2C_RFIFO_RESET; |
| } else { |
| offset = REG_WRCONF; |
| val = I2C_WFIFO_RESET; |
| } |
| |
| val |= zx2967_i2c_readl(i2c, offset); |
| zx2967_i2c_writel(i2c, val, offset); |
| } |
| |
| static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c *i2c, u32 size) |
| { |
| u8 val[I2C_FIFO_MAX] = {0}; |
| int i; |
| |
| if (size > I2C_FIFO_MAX) { |
| dev_err(DEV(i2c), "fifo size %d over the max value %d\n", |
| size, I2C_FIFO_MAX); |
| return -EINVAL; |
| } |
| |
| zx2967_i2c_readsb(i2c, val, REG_DATA, size); |
| for (i = 0; i < size; i++) { |
| *i2c->cur_trans++ = val[i]; |
| i2c->residue--; |
| } |
| |
| barrier(); |
| |
| return 0; |
| } |
| |
| static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c *i2c) |
| { |
| size_t residue = i2c->residue; |
| u8 *buf = i2c->cur_trans; |
| |
| if (residue == 0) { |
| dev_err(DEV(i2c), "residue is %d\n", (int)residue); |
| return -EINVAL; |
| } |
| |
| if (residue <= I2C_FIFO_MAX) { |
| zx2967_i2c_writesb(i2c, buf, REG_DATA, residue); |
| |
| /* Again update before writing to FIFO to make sure isr sees. */ |
| i2c->residue = 0; |
| i2c->cur_trans = NULL; |
| } else { |
| zx2967_i2c_writesb(i2c, buf, REG_DATA, I2C_FIFO_MAX); |
| i2c->residue -= I2C_FIFO_MAX; |
| i2c->cur_trans += I2C_FIFO_MAX; |
| } |
| |
| barrier(); |
| |
| return 0; |
| } |
| |
| static int zx2967_i2c_reset_hardware(struct zx2967_i2c *i2c) |
| { |
| u32 val; |
| u32 clk_div; |
| |
| val = I2C_MASTER | I2C_IRQ_MSK_ENABLE; |
| zx2967_i2c_writel(i2c, val, REG_CMD); |
| |
| clk_div = clk_get_rate(i2c->clk) / i2c->clk_freq - 1; |
| zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_FS); |
| zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_HS); |
| |
| zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_WRCONF); |
| zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_RDCONF); |
| zx2967_i2c_writel(i2c, 1, REG_RDCONF); |
| |
| zx2967_i2c_flush_fifos(i2c); |
| |
| return 0; |
| } |
| |
| static void zx2967_i2c_isr_clr(struct zx2967_i2c *i2c) |
| { |
| u32 status; |
| |
| status = zx2967_i2c_readl(i2c, REG_STAT); |
| status |= I2C_IRQ_ACK_CLEAR; |
| zx2967_i2c_writel(i2c, status, REG_STAT); |
| } |
| |
| static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id) |
| { |
| u32 status; |
| struct zx2967_i2c *i2c = (struct zx2967_i2c *)dev_id; |
| |
| status = zx2967_i2c_readl(i2c, REG_STAT) & I2C_INT_MASK; |
| zx2967_i2c_isr_clr(i2c); |
| |
| if (status & I2C_SR_EDEVICE) |
| i2c->error = -ENXIO; |
| else if (status & I2C_SR_EDATA) |
| i2c->error = -EIO; |
| else if (status & I2C_TRANS_DONE) |
| i2c->error = 0; |
| else |
| goto done; |
| |
| complete(&i2c->complete); |
| done: |
| return IRQ_HANDLED; |
| } |
| |
| static void zx2967_set_addr(struct zx2967_i2c *i2c, u16 addr) |
| { |
| u16 val; |
| |
| val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK; |
| zx2967_i2c_writel(i2c, val, REG_DEVADDR_L); |
| |
| val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK; |
| zx2967_i2c_writel(i2c, val, REG_DEVADDR_H); |
| if (val) |
| val = zx2967_i2c_readl(i2c, REG_CMD) | I2C_ADDR_MODE_TEN; |
| else |
| val = zx2967_i2c_readl(i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN; |
| zx2967_i2c_writel(i2c, val, REG_CMD); |
| } |
| |
| static int zx2967_i2c_xfer_bytes(struct zx2967_i2c *i2c, u32 bytes) |
| { |
| unsigned long time_left; |
| int rd = i2c->msg_rd; |
| int ret; |
| |
| reinit_completion(&i2c->complete); |
| |
| if (rd) { |
| zx2967_i2c_writel(i2c, bytes - 1, REG_RDCONF); |
| } else { |
| ret = zx2967_i2c_fill_tx_fifo(i2c); |
| if (ret) |
| return ret; |
| } |
| |
| zx2967_i2c_start_ctrl(i2c); |
| |
| time_left = wait_for_completion_timeout(&i2c->complete, |
| I2C_TIMEOUT); |
| if (time_left == 0) |
| return -ETIMEDOUT; |
| |
| if (i2c->error) |
| return i2c->error; |
| |
| return rd ? zx2967_i2c_empty_rx_fifo(i2c, bytes) : 0; |
| } |
| |
| static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c, |
| struct i2c_msg *msg) |
| { |
| int ret; |
| int i; |
| |
| if (msg->len == 0) |
| return -EINVAL; |
| |
| zx2967_i2c_flush_fifos(i2c); |
| |
| i2c->cur_trans = msg->buf; |
| i2c->residue = msg->len; |
| i2c->access_cnt = msg->len / I2C_FIFO_MAX; |
| i2c->msg_rd = msg->flags & I2C_M_RD; |
| |
| for (i = 0; i < i2c->access_cnt; i++) { |
| ret = zx2967_i2c_xfer_bytes(i2c, I2C_FIFO_MAX); |
| if (ret) |
| return ret; |
| } |
| |
| if (i2c->residue > 0) { |
| ret = zx2967_i2c_xfer_bytes(i2c, i2c->residue); |
| if (ret) |
| return ret; |
| } |
| |
| i2c->residue = 0; |
| i2c->access_cnt = 0; |
| |
| return 0; |
| } |
| |
| static int zx2967_i2c_xfer(struct i2c_adapter *adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct zx2967_i2c *i2c = i2c_get_adapdata(adap); |
| int ret; |
| int i; |
| |
| if (i2c->is_suspended) |
| return -EBUSY; |
| |
| zx2967_set_addr(i2c, msgs->addr); |
| |
| for (i = 0; i < num; i++) { |
| ret = zx2967_i2c_xfer_msg(i2c, &msgs[i]); |
| if (ret) |
| return ret; |
| } |
| |
| return num; |
| } |
| |
| static void |
| zx2967_smbus_xfer_prepare(struct zx2967_i2c *i2c, u16 addr, |
| char read_write, u8 command, int size, |
| union i2c_smbus_data *data) |
| { |
| u32 val; |
| |
| val = zx2967_i2c_readl(i2c, REG_RDCONF); |
| val |= I2C_RFIFO_RESET; |
| zx2967_i2c_writel(i2c, val, REG_RDCONF); |
| zx2967_set_addr(i2c, addr); |
| val = zx2967_i2c_readl(i2c, REG_CMD); |
| val &= ~I2C_RW_READ; |
| zx2967_i2c_writel(i2c, val, REG_CMD); |
| |
| switch (size) { |
| case I2C_SMBUS_BYTE: |
| zx2967_i2c_writel(i2c, command, REG_DATA); |
| break; |
| case I2C_SMBUS_BYTE_DATA: |
| zx2967_i2c_writel(i2c, command, REG_DATA); |
| if (read_write == I2C_SMBUS_WRITE) |
| zx2967_i2c_writel(i2c, data->byte, REG_DATA); |
| break; |
| case I2C_SMBUS_WORD_DATA: |
| zx2967_i2c_writel(i2c, command, REG_DATA); |
| if (read_write == I2C_SMBUS_WRITE) { |
| zx2967_i2c_writel(i2c, (data->word >> 8), REG_DATA); |
| zx2967_i2c_writel(i2c, (data->word & 0xff), |
| REG_DATA); |
| } |
| break; |
| } |
| } |
| |
| static int zx2967_smbus_xfer_read(struct zx2967_i2c *i2c, int size, |
| union i2c_smbus_data *data) |
| { |
| unsigned long time_left; |
| u8 buf[2]; |
| u32 val; |
| |
| reinit_completion(&i2c->complete); |
| |
| val = zx2967_i2c_readl(i2c, REG_CMD); |
| val |= I2C_CMB_RW_EN; |
| zx2967_i2c_writel(i2c, val, REG_CMD); |
| |
| val = zx2967_i2c_readl(i2c, REG_CMD); |
| val |= I2C_START; |
| zx2967_i2c_writel(i2c, val, REG_CMD); |
| |
| time_left = wait_for_completion_timeout(&i2c->complete, |
| I2C_TIMEOUT); |
| if (time_left == 0) |
| return -ETIMEDOUT; |
| |
| if (i2c->error) |
| return i2c->error; |
| |
| switch (size) { |
| case I2C_SMBUS_BYTE: |
| case I2C_SMBUS_BYTE_DATA: |
| val = zx2967_i2c_readl(i2c, REG_DATA); |
| data->byte = val; |
| break; |
| case I2C_SMBUS_WORD_DATA: |
| case I2C_SMBUS_PROC_CALL: |
| buf[0] = zx2967_i2c_readl(i2c, REG_DATA); |
| buf[1] = zx2967_i2c_readl(i2c, REG_DATA); |
| data->word = (buf[0] << 8) | buf[1]; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int zx2967_smbus_xfer_write(struct zx2967_i2c *i2c) |
| { |
| unsigned long time_left; |
| u32 val; |
| |
| reinit_completion(&i2c->complete); |
| val = zx2967_i2c_readl(i2c, REG_CMD); |
| val |= I2C_START; |
| zx2967_i2c_writel(i2c, val, REG_CMD); |
| |
| time_left = wait_for_completion_timeout(&i2c->complete, |
| I2C_TIMEOUT); |
| if (time_left == 0) |
| return -ETIMEDOUT; |
| |
| if (i2c->error) |
| return i2c->error; |
| |
| return 0; |
| } |
| |
| static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr, |
| unsigned short flags, char read_write, |
| u8 command, int size, union i2c_smbus_data *data) |
| { |
| struct zx2967_i2c *i2c = i2c_get_adapdata(adap); |
| |
| if (size == I2C_SMBUS_QUICK) |
| read_write = I2C_SMBUS_WRITE; |
| |
| switch (size) { |
| case I2C_SMBUS_QUICK: |
| case I2C_SMBUS_BYTE: |
| case I2C_SMBUS_BYTE_DATA: |
| case I2C_SMBUS_WORD_DATA: |
| zx2967_smbus_xfer_prepare(i2c, addr, read_write, |
| command, size, data); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| if (read_write == I2C_SMBUS_READ) |
| return zx2967_smbus_xfer_read(i2c, size, data); |
| |
| return zx2967_smbus_xfer_write(i2c); |
| } |
| |
| static u32 zx2967_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | |
| I2C_FUNC_SMBUS_QUICK | |
| I2C_FUNC_SMBUS_BYTE | |
| I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_WORD_DATA | |
| I2C_FUNC_SMBUS_BLOCK_DATA | |
| I2C_FUNC_SMBUS_PROC_CALL | |
| I2C_FUNC_SMBUS_I2C_BLOCK; |
| } |
| |
| static int __maybe_unused zx2967_i2c_suspend(struct device *dev) |
| { |
| struct zx2967_i2c *i2c = dev_get_drvdata(dev); |
| |
| i2c->is_suspended = true; |
| clk_disable_unprepare(i2c->clk); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused zx2967_i2c_resume(struct device *dev) |
| { |
| struct zx2967_i2c *i2c = dev_get_drvdata(dev); |
| |
| i2c->is_suspended = false; |
| clk_prepare_enable(i2c->clk); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops, |
| zx2967_i2c_suspend, zx2967_i2c_resume); |
| |
| static const struct i2c_algorithm zx2967_i2c_algo = { |
| .master_xfer = zx2967_i2c_xfer, |
| .smbus_xfer = zx2967_smbus_xfer, |
| .functionality = zx2967_i2c_func, |
| }; |
| |
| static const struct of_device_id zx2967_i2c_of_match[] = { |
| { .compatible = "zte,zx296718-i2c", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match); |
| |
| static int zx2967_i2c_probe(struct platform_device *pdev) |
| { |
| struct zx2967_i2c *i2c; |
| void __iomem *reg_base; |
| struct resource *res; |
| struct clk *clk; |
| int ret; |
| |
| i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); |
| if (!i2c) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| reg_base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(reg_base)) |
| return PTR_ERR(reg_base); |
| |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "missing controller clock"); |
| return PTR_ERR(clk); |
| } |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to enable i2c_clk\n"); |
| return ret; |
| } |
| |
| ret = device_property_read_u32(&pdev->dev, "clock-frequency", |
| &i2c->clk_freq); |
| if (ret) { |
| dev_err(&pdev->dev, "missing clock-frequency"); |
| return ret; |
| } |
| |
| ret = platform_get_irq(pdev, 0); |
| if (ret < 0) |
| return ret; |
| |
| i2c->irq = ret; |
| i2c->reg_base = reg_base; |
| i2c->clk = clk; |
| |
| init_completion(&i2c->complete); |
| platform_set_drvdata(pdev, i2c); |
| |
| ret = zx2967_i2c_reset_hardware(i2c); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to initialize i2c controller\n"); |
| goto err_clk_unprepare; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, i2c->irq, |
| zx2967_i2c_isr, 0, dev_name(&pdev->dev), i2c); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to request irq %i\n", i2c->irq); |
| goto err_clk_unprepare; |
| } |
| |
| i2c_set_adapdata(&i2c->adap, i2c); |
| strlcpy(i2c->adap.name, "zx2967 i2c adapter", |
| sizeof(i2c->adap.name)); |
| i2c->adap.algo = &zx2967_i2c_algo; |
| i2c->adap.nr = pdev->id; |
| i2c->adap.dev.parent = &pdev->dev; |
| i2c->adap.dev.of_node = pdev->dev.of_node; |
| |
| ret = i2c_add_numbered_adapter(&i2c->adap); |
| if (ret) |
| goto err_clk_unprepare; |
| |
| return 0; |
| |
| err_clk_unprepare: |
| clk_disable_unprepare(i2c->clk); |
| return ret; |
| } |
| |
| static int zx2967_i2c_remove(struct platform_device *pdev) |
| { |
| struct zx2967_i2c *i2c = platform_get_drvdata(pdev); |
| |
| i2c_del_adapter(&i2c->adap); |
| clk_disable_unprepare(i2c->clk); |
| |
| return 0; |
| } |
| |
| static struct platform_driver zx2967_i2c_driver = { |
| .probe = zx2967_i2c_probe, |
| .remove = zx2967_i2c_remove, |
| .driver = { |
| .name = "zx2967_i2c", |
| .of_match_table = zx2967_i2c_of_match, |
| .pm = &zx2967_i2c_dev_pm_ops, |
| }, |
| }; |
| module_platform_driver(zx2967_i2c_driver); |
| |
| MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>"); |
| MODULE_DESCRIPTION("ZTE ZX2967 I2C Bus Controller driver"); |
| MODULE_LICENSE("GPL v2"); |