| /* |
| * max31790.c - Part of lm_sensors, Linux kernel modules for hardware |
| * monitoring. |
| * |
| * (C) 2015 by Il Han <corone.il.han@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/hwmon.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/jiffies.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| /* MAX31790 registers */ |
| #define MAX31790_REG_GLOBAL_CONFIG 0x00 |
| #define MAX31790_REG_FAN_CONFIG(ch) (0x02 + (ch)) |
| #define MAX31790_REG_FAN_DYNAMICS(ch) (0x08 + (ch)) |
| #define MAX31790_REG_FAN_FAULT_STATUS2 0x10 |
| #define MAX31790_REG_FAN_FAULT_STATUS1 0x11 |
| #define MAX31790_REG_TACH_COUNT(ch) (0x18 + (ch) * 2) |
| #define MAX31790_REG_PWM_DUTY_CYCLE(ch) (0x30 + (ch) * 2) |
| #define MAX31790_REG_PWMOUT(ch) (0x40 + (ch) * 2) |
| #define MAX31790_REG_TARGET_COUNT(ch) (0x50 + (ch) * 2) |
| |
| /* Fan Config register bits */ |
| #define MAX31790_FAN_CFG_RPM_MODE 0x80 |
| #define MAX31790_FAN_CFG_TACH_INPUT_EN 0x08 |
| #define MAX31790_FAN_CFG_TACH_INPUT 0x01 |
| |
| /* Fan Dynamics register bits */ |
| #define MAX31790_FAN_DYN_SR_SHIFT 5 |
| #define MAX31790_FAN_DYN_SR_MASK 0xE0 |
| #define SR_FROM_REG(reg) (((reg) & MAX31790_FAN_DYN_SR_MASK) \ |
| >> MAX31790_FAN_DYN_SR_SHIFT) |
| |
| #define FAN_RPM_MIN 120 |
| #define FAN_RPM_MAX 7864320 |
| |
| #define RPM_FROM_REG(reg, sr) (((reg) >> 4) ? \ |
| ((60 * (sr) * 8192) / ((reg) >> 4)) : \ |
| FAN_RPM_MAX) |
| #define RPM_TO_REG(rpm, sr) ((60 * (sr) * 8192) / ((rpm) * 2)) |
| |
| #define NR_CHANNEL 6 |
| |
| /* |
| * Client data (each client gets its own) |
| */ |
| struct max31790_data { |
| struct i2c_client *client; |
| struct mutex update_lock; |
| bool valid; /* zero until following fields are valid */ |
| unsigned long last_updated; /* in jiffies */ |
| |
| /* register values */ |
| u8 fan_config[NR_CHANNEL]; |
| u8 fan_dynamics[NR_CHANNEL]; |
| u16 fault_status; |
| u16 tach[NR_CHANNEL * 2]; |
| u16 pwm[NR_CHANNEL]; |
| u16 target_count[NR_CHANNEL]; |
| }; |
| |
| static struct max31790_data *max31790_update_device(struct device *dev) |
| { |
| struct max31790_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| struct max31790_data *ret = data; |
| int i; |
| int rv; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { |
| rv = i2c_smbus_read_byte_data(client, |
| MAX31790_REG_FAN_FAULT_STATUS1); |
| if (rv < 0) |
| goto abort; |
| data->fault_status = rv & 0x3F; |
| |
| rv = i2c_smbus_read_byte_data(client, |
| MAX31790_REG_FAN_FAULT_STATUS2); |
| if (rv < 0) |
| goto abort; |
| data->fault_status |= (rv & 0x3F) << 6; |
| |
| for (i = 0; i < NR_CHANNEL; i++) { |
| rv = i2c_smbus_read_word_swapped(client, |
| MAX31790_REG_TACH_COUNT(i)); |
| if (rv < 0) |
| goto abort; |
| data->tach[i] = rv; |
| |
| if (data->fan_config[i] |
| & MAX31790_FAN_CFG_TACH_INPUT) { |
| rv = i2c_smbus_read_word_swapped(client, |
| MAX31790_REG_TACH_COUNT(NR_CHANNEL |
| + i)); |
| if (rv < 0) |
| goto abort; |
| data->tach[NR_CHANNEL + i] = rv; |
| } else { |
| rv = i2c_smbus_read_word_swapped(client, |
| MAX31790_REG_PWMOUT(i)); |
| if (rv < 0) |
| goto abort; |
| data->pwm[i] = rv; |
| |
| rv = i2c_smbus_read_word_swapped(client, |
| MAX31790_REG_TARGET_COUNT(i)); |
| if (rv < 0) |
| goto abort; |
| data->target_count[i] = rv; |
| } |
| } |
| |
| data->last_updated = jiffies; |
| data->valid = true; |
| } |
| goto done; |
| |
| abort: |
| data->valid = false; |
| ret = ERR_PTR(rv); |
| |
| done: |
| mutex_unlock(&data->update_lock); |
| |
| return ret; |
| } |
| |
| static const u8 tach_period[8] = { 1, 2, 4, 8, 16, 32, 32, 32 }; |
| |
| static u8 get_tach_period(u8 fan_dynamics) |
| { |
| return tach_period[SR_FROM_REG(fan_dynamics)]; |
| } |
| |
| static u8 bits_for_tach_period(int rpm) |
| { |
| u8 bits; |
| |
| if (rpm < 500) |
| bits = 0x0; |
| else if (rpm < 1000) |
| bits = 0x1; |
| else if (rpm < 2000) |
| bits = 0x2; |
| else if (rpm < 4000) |
| bits = 0x3; |
| else if (rpm < 8000) |
| bits = 0x4; |
| else |
| bits = 0x5; |
| |
| return bits; |
| } |
| |
| static int max31790_read_fan(struct device *dev, u32 attr, int channel, |
| long *val) |
| { |
| struct max31790_data *data = max31790_update_device(dev); |
| int sr, rpm; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| sr = get_tach_period(data->fan_dynamics[channel % NR_CHANNEL]); |
| rpm = RPM_FROM_REG(data->tach[channel], sr); |
| *val = rpm; |
| return 0; |
| case hwmon_fan_target: |
| sr = get_tach_period(data->fan_dynamics[channel]); |
| rpm = RPM_FROM_REG(data->target_count[channel], sr); |
| *val = rpm; |
| return 0; |
| case hwmon_fan_fault: |
| *val = !!(data->fault_status & (1 << channel)); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int max31790_write_fan(struct device *dev, u32 attr, int channel, |
| long val) |
| { |
| struct max31790_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| int target_count; |
| int err = 0; |
| u8 bits; |
| int sr; |
| |
| mutex_lock(&data->update_lock); |
| |
| switch (attr) { |
| case hwmon_fan_target: |
| val = clamp_val(val, FAN_RPM_MIN, FAN_RPM_MAX); |
| bits = bits_for_tach_period(val); |
| data->fan_dynamics[channel] = |
| ((data->fan_dynamics[channel] & |
| ~MAX31790_FAN_DYN_SR_MASK) | |
| (bits << MAX31790_FAN_DYN_SR_SHIFT)); |
| err = i2c_smbus_write_byte_data(client, |
| MAX31790_REG_FAN_DYNAMICS(channel), |
| data->fan_dynamics[channel]); |
| if (err < 0) |
| break; |
| |
| sr = get_tach_period(data->fan_dynamics[channel]); |
| target_count = RPM_TO_REG(val, sr); |
| target_count = clamp_val(target_count, 0x1, 0x7FF); |
| |
| data->target_count[channel] = target_count << 5; |
| |
| err = i2c_smbus_write_word_swapped(client, |
| MAX31790_REG_TARGET_COUNT(channel), |
| data->target_count[channel]); |
| break; |
| default: |
| err = -EOPNOTSUPP; |
| break; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return err; |
| } |
| |
| static umode_t max31790_fan_is_visible(const void *_data, u32 attr, int channel) |
| { |
| const struct max31790_data *data = _data; |
| u8 fan_config = data->fan_config[channel % NR_CHANNEL]; |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| case hwmon_fan_fault: |
| if (channel < NR_CHANNEL || |
| (fan_config & MAX31790_FAN_CFG_TACH_INPUT)) |
| return S_IRUGO; |
| return 0; |
| case hwmon_fan_target: |
| if (channel < NR_CHANNEL && |
| !(fan_config & MAX31790_FAN_CFG_TACH_INPUT)) |
| return S_IRUGO | S_IWUSR; |
| return 0; |
| default: |
| return 0; |
| } |
| } |
| |
| static int max31790_read_pwm(struct device *dev, u32 attr, int channel, |
| long *val) |
| { |
| struct max31790_data *data = max31790_update_device(dev); |
| u8 fan_config; |
| |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| fan_config = data->fan_config[channel]; |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| *val = data->pwm[channel] >> 8; |
| return 0; |
| case hwmon_pwm_enable: |
| if (fan_config & MAX31790_FAN_CFG_RPM_MODE) |
| *val = 2; |
| else if (fan_config & MAX31790_FAN_CFG_TACH_INPUT_EN) |
| *val = 1; |
| else |
| *val = 0; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int max31790_write_pwm(struct device *dev, u32 attr, int channel, |
| long val) |
| { |
| struct max31790_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| u8 fan_config; |
| int err = 0; |
| |
| mutex_lock(&data->update_lock); |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| if (val < 0 || val > 255) { |
| err = -EINVAL; |
| break; |
| } |
| data->pwm[channel] = val << 8; |
| err = i2c_smbus_write_word_swapped(client, |
| MAX31790_REG_PWMOUT(channel), |
| data->pwm[channel]); |
| break; |
| case hwmon_pwm_enable: |
| fan_config = data->fan_config[channel]; |
| if (val == 0) { |
| fan_config &= ~(MAX31790_FAN_CFG_TACH_INPUT_EN | |
| MAX31790_FAN_CFG_RPM_MODE); |
| } else if (val == 1) { |
| fan_config = (fan_config | |
| MAX31790_FAN_CFG_TACH_INPUT_EN) & |
| ~MAX31790_FAN_CFG_RPM_MODE; |
| } else if (val == 2) { |
| fan_config |= MAX31790_FAN_CFG_TACH_INPUT_EN | |
| MAX31790_FAN_CFG_RPM_MODE; |
| } else { |
| err = -EINVAL; |
| break; |
| } |
| data->fan_config[channel] = fan_config; |
| err = i2c_smbus_write_byte_data(client, |
| MAX31790_REG_FAN_CONFIG(channel), |
| fan_config); |
| break; |
| default: |
| err = -EOPNOTSUPP; |
| break; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return err; |
| } |
| |
| static umode_t max31790_pwm_is_visible(const void *_data, u32 attr, int channel) |
| { |
| const struct max31790_data *data = _data; |
| u8 fan_config = data->fan_config[channel]; |
| |
| switch (attr) { |
| case hwmon_pwm_input: |
| case hwmon_pwm_enable: |
| if (!(fan_config & MAX31790_FAN_CFG_TACH_INPUT)) |
| return S_IRUGO | S_IWUSR; |
| return 0; |
| default: |
| return 0; |
| } |
| } |
| |
| static int max31790_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| switch (type) { |
| case hwmon_fan: |
| return max31790_read_fan(dev, attr, channel, val); |
| case hwmon_pwm: |
| return max31790_read_pwm(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int max31790_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long val) |
| { |
| switch (type) { |
| case hwmon_fan: |
| return max31790_write_fan(dev, attr, channel, val); |
| case hwmon_pwm: |
| return max31790_write_pwm(dev, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t max31790_is_visible(const void *data, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| switch (type) { |
| case hwmon_fan: |
| return max31790_fan_is_visible(data, attr, channel); |
| case hwmon_pwm: |
| return max31790_pwm_is_visible(data, attr, channel); |
| default: |
| return 0; |
| } |
| } |
| |
| static const u32 max31790_fan_config[] = { |
| HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_FAULT, |
| HWMON_F_INPUT | HWMON_F_FAULT, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info max31790_fan = { |
| .type = hwmon_fan, |
| .config = max31790_fan_config, |
| }; |
| |
| static const u32 max31790_pwm_config[] = { |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info max31790_pwm = { |
| .type = hwmon_pwm, |
| .config = max31790_pwm_config, |
| }; |
| |
| static const struct hwmon_channel_info *max31790_info[] = { |
| &max31790_fan, |
| &max31790_pwm, |
| NULL |
| }; |
| |
| static const struct hwmon_ops max31790_hwmon_ops = { |
| .is_visible = max31790_is_visible, |
| .read = max31790_read, |
| .write = max31790_write, |
| }; |
| |
| static const struct hwmon_chip_info max31790_chip_info = { |
| .ops = &max31790_hwmon_ops, |
| .info = max31790_info, |
| }; |
| |
| static int max31790_init_client(struct i2c_client *client, |
| struct max31790_data *data) |
| { |
| int i, rv; |
| |
| for (i = 0; i < NR_CHANNEL; i++) { |
| rv = i2c_smbus_read_byte_data(client, |
| MAX31790_REG_FAN_CONFIG(i)); |
| if (rv < 0) |
| return rv; |
| data->fan_config[i] = rv; |
| |
| rv = i2c_smbus_read_byte_data(client, |
| MAX31790_REG_FAN_DYNAMICS(i)); |
| if (rv < 0) |
| return rv; |
| data->fan_dynamics[i] = rv; |
| } |
| |
| return 0; |
| } |
| |
| static int max31790_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| struct device *dev = &client->dev; |
| struct max31790_data *data; |
| struct device *hwmon_dev; |
| int err; |
| |
| if (!i2c_check_functionality(adapter, |
| I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) |
| return -ENODEV; |
| |
| data = devm_kzalloc(dev, sizeof(struct max31790_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->client = client; |
| mutex_init(&data->update_lock); |
| |
| /* |
| * Initialize the max31790 chip |
| */ |
| err = max31790_init_client(client, data); |
| if (err) |
| return err; |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, |
| data, |
| &max31790_chip_info, |
| NULL); |
| |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct i2c_device_id max31790_id[] = { |
| { "max31790", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, max31790_id); |
| |
| static struct i2c_driver max31790_driver = { |
| .class = I2C_CLASS_HWMON, |
| .probe = max31790_probe, |
| .driver = { |
| .name = "max31790", |
| }, |
| .id_table = max31790_id, |
| }; |
| |
| module_i2c_driver(max31790_driver); |
| |
| MODULE_AUTHOR("Il Han <corone.il.han@gmail.com>"); |
| MODULE_DESCRIPTION("MAX31790 sensor driver"); |
| MODULE_LICENSE("GPL"); |