| /* |
| * adt7x10.c - Part of lm_sensors, Linux kernel modules for hardware |
| * monitoring |
| * This driver handles the ADT7410 and compatible digital temperature sensors. |
| * Hartmut Knaack <knaack.h@gmx.de> 2012-07-22 |
| * based on lm75.c by Frodo Looijaard <frodol@dds.nl> |
| * and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| |
| #include "adt7x10.h" |
| |
| /* |
| * ADT7X10 status |
| */ |
| #define ADT7X10_STAT_T_LOW (1 << 4) |
| #define ADT7X10_STAT_T_HIGH (1 << 5) |
| #define ADT7X10_STAT_T_CRIT (1 << 6) |
| #define ADT7X10_STAT_NOT_RDY (1 << 7) |
| |
| /* |
| * ADT7X10 config |
| */ |
| #define ADT7X10_FAULT_QUEUE_MASK (1 << 0 | 1 << 1) |
| #define ADT7X10_CT_POLARITY (1 << 2) |
| #define ADT7X10_INT_POLARITY (1 << 3) |
| #define ADT7X10_EVENT_MODE (1 << 4) |
| #define ADT7X10_MODE_MASK (1 << 5 | 1 << 6) |
| #define ADT7X10_FULL (0 << 5 | 0 << 6) |
| #define ADT7X10_PD (1 << 5 | 1 << 6) |
| #define ADT7X10_RESOLUTION (1 << 7) |
| |
| /* |
| * ADT7X10 masks |
| */ |
| #define ADT7X10_T13_VALUE_MASK 0xFFF8 |
| #define ADT7X10_T_HYST_MASK 0xF |
| |
| /* straight from the datasheet */ |
| #define ADT7X10_TEMP_MIN (-55000) |
| #define ADT7X10_TEMP_MAX 150000 |
| |
| /* Each client has this additional data */ |
| struct adt7x10_data { |
| const struct adt7x10_ops *ops; |
| const char *name; |
| struct device *hwmon_dev; |
| struct mutex update_lock; |
| u8 config; |
| u8 oldconfig; |
| bool valid; /* true if registers valid */ |
| unsigned long last_updated; /* In jiffies */ |
| s16 temp[4]; /* Register values, |
| 0 = input |
| 1 = high |
| 2 = low |
| 3 = critical */ |
| u8 hyst; /* hysteresis offset */ |
| }; |
| |
| static int adt7x10_read_byte(struct device *dev, u8 reg) |
| { |
| struct adt7x10_data *d = dev_get_drvdata(dev); |
| return d->ops->read_byte(dev, reg); |
| } |
| |
| static int adt7x10_write_byte(struct device *dev, u8 reg, u8 data) |
| { |
| struct adt7x10_data *d = dev_get_drvdata(dev); |
| return d->ops->write_byte(dev, reg, data); |
| } |
| |
| static int adt7x10_read_word(struct device *dev, u8 reg) |
| { |
| struct adt7x10_data *d = dev_get_drvdata(dev); |
| return d->ops->read_word(dev, reg); |
| } |
| |
| static int adt7x10_write_word(struct device *dev, u8 reg, u16 data) |
| { |
| struct adt7x10_data *d = dev_get_drvdata(dev); |
| return d->ops->write_word(dev, reg, data); |
| } |
| |
| static const u8 ADT7X10_REG_TEMP[4] = { |
| ADT7X10_TEMPERATURE, /* input */ |
| ADT7X10_T_ALARM_HIGH, /* high */ |
| ADT7X10_T_ALARM_LOW, /* low */ |
| ADT7X10_T_CRIT, /* critical */ |
| }; |
| |
| static irqreturn_t adt7x10_irq_handler(int irq, void *private) |
| { |
| struct device *dev = private; |
| int status; |
| |
| status = adt7x10_read_byte(dev, ADT7X10_STATUS); |
| if (status < 0) |
| return IRQ_HANDLED; |
| |
| if (status & ADT7X10_STAT_T_HIGH) |
| sysfs_notify(&dev->kobj, NULL, "temp1_max_alarm"); |
| if (status & ADT7X10_STAT_T_LOW) |
| sysfs_notify(&dev->kobj, NULL, "temp1_min_alarm"); |
| if (status & ADT7X10_STAT_T_CRIT) |
| sysfs_notify(&dev->kobj, NULL, "temp1_crit_alarm"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int adt7x10_temp_ready(struct device *dev) |
| { |
| int i, status; |
| |
| for (i = 0; i < 6; i++) { |
| status = adt7x10_read_byte(dev, ADT7X10_STATUS); |
| if (status < 0) |
| return status; |
| if (!(status & ADT7X10_STAT_NOT_RDY)) |
| return 0; |
| msleep(60); |
| } |
| return -ETIMEDOUT; |
| } |
| |
| static int adt7x10_update_temp(struct device *dev) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ + HZ / 2) |
| || !data->valid) { |
| int temp; |
| |
| dev_dbg(dev, "Starting update\n"); |
| |
| ret = adt7x10_temp_ready(dev); /* check for new value */ |
| if (ret) |
| goto abort; |
| |
| temp = adt7x10_read_word(dev, ADT7X10_REG_TEMP[0]); |
| if (temp < 0) { |
| ret = temp; |
| dev_dbg(dev, "Failed to read value: reg %d, error %d\n", |
| ADT7X10_REG_TEMP[0], ret); |
| goto abort; |
| } |
| data->temp[0] = temp; |
| data->last_updated = jiffies; |
| data->valid = true; |
| } |
| |
| abort: |
| mutex_unlock(&data->update_lock); |
| return ret; |
| } |
| |
| static int adt7x10_fill_cache(struct device *dev) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| int ret; |
| int i; |
| |
| for (i = 1; i < ARRAY_SIZE(data->temp); i++) { |
| ret = adt7x10_read_word(dev, ADT7X10_REG_TEMP[i]); |
| if (ret < 0) { |
| dev_dbg(dev, "Failed to read value: reg %d, error %d\n", |
| ADT7X10_REG_TEMP[i], ret); |
| return ret; |
| } |
| data->temp[i] = ret; |
| } |
| |
| ret = adt7x10_read_byte(dev, ADT7X10_T_HYST); |
| if (ret < 0) { |
| dev_dbg(dev, "Failed to read value: reg %d, error %d\n", |
| ADT7X10_T_HYST, ret); |
| return ret; |
| } |
| data->hyst = ret; |
| |
| return 0; |
| } |
| |
| static s16 ADT7X10_TEMP_TO_REG(long temp) |
| { |
| return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7X10_TEMP_MIN, |
| ADT7X10_TEMP_MAX) * 128, 1000); |
| } |
| |
| static int ADT7X10_REG_TO_TEMP(struct adt7x10_data *data, s16 reg) |
| { |
| /* in 13 bit mode, bits 0-2 are status flags - mask them out */ |
| if (!(data->config & ADT7X10_RESOLUTION)) |
| reg &= ADT7X10_T13_VALUE_MASK; |
| /* |
| * temperature is stored in twos complement format, in steps of |
| * 1/128°C |
| */ |
| return DIV_ROUND_CLOSEST(reg * 1000, 128); |
| } |
| |
| /*-----------------------------------------------------------------------*/ |
| |
| /* sysfs attributes for hwmon */ |
| |
| static ssize_t adt7x10_show_temp(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| |
| if (attr->index == 0) { |
| int ret; |
| |
| ret = adt7x10_update_temp(dev); |
| if (ret) |
| return ret; |
| } |
| |
| return sprintf(buf, "%d\n", ADT7X10_REG_TO_TEMP(data, |
| data->temp[attr->index])); |
| } |
| |
| static ssize_t adt7x10_set_temp(struct device *dev, |
| struct device_attribute *da, |
| const char *buf, size_t count) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| int nr = attr->index; |
| long temp; |
| int ret; |
| |
| ret = kstrtol(buf, 10, &temp); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&data->update_lock); |
| data->temp[nr] = ADT7X10_TEMP_TO_REG(temp); |
| ret = adt7x10_write_word(dev, ADT7X10_REG_TEMP[nr], data->temp[nr]); |
| if (ret) |
| count = ret; |
| mutex_unlock(&data->update_lock); |
| return count; |
| } |
| |
| static ssize_t adt7x10_show_t_hyst(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| int nr = attr->index; |
| int hyst; |
| |
| hyst = (data->hyst & ADT7X10_T_HYST_MASK) * 1000; |
| |
| /* |
| * hysteresis is stored as a 4 bit offset in the device, convert it |
| * to an absolute value |
| */ |
| if (nr == 2) /* min has positive offset, others have negative */ |
| hyst = -hyst; |
| return sprintf(buf, "%d\n", |
| ADT7X10_REG_TO_TEMP(data, data->temp[nr]) - hyst); |
| } |
| |
| static ssize_t adt7x10_set_t_hyst(struct device *dev, |
| struct device_attribute *da, |
| const char *buf, size_t count) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| int limit, ret; |
| long hyst; |
| |
| ret = kstrtol(buf, 10, &hyst); |
| if (ret) |
| return ret; |
| /* convert absolute hysteresis value to a 4 bit delta value */ |
| limit = ADT7X10_REG_TO_TEMP(data, data->temp[1]); |
| hyst = clamp_val(hyst, ADT7X10_TEMP_MIN, ADT7X10_TEMP_MAX); |
| data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000), |
| 0, ADT7X10_T_HYST_MASK); |
| ret = adt7x10_write_byte(dev, ADT7X10_T_HYST, data->hyst); |
| if (ret) |
| return ret; |
| |
| return count; |
| } |
| |
| static ssize_t adt7x10_show_alarm(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| int ret; |
| |
| ret = adt7x10_read_byte(dev, ADT7X10_STATUS); |
| if (ret < 0) |
| return ret; |
| |
| return sprintf(buf, "%d\n", !!(ret & attr->index)); |
| } |
| |
| static ssize_t name_show(struct device *dev, struct device_attribute *da, |
| char *buf) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", data->name); |
| } |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adt7x10_show_temp, NULL, 0); |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, |
| adt7x10_show_temp, adt7x10_set_temp, 1); |
| static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, |
| adt7x10_show_temp, adt7x10_set_temp, 2); |
| static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, |
| adt7x10_show_temp, adt7x10_set_temp, 3); |
| static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, |
| adt7x10_show_t_hyst, adt7x10_set_t_hyst, 1); |
| static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO, |
| adt7x10_show_t_hyst, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, |
| adt7x10_show_t_hyst, NULL, 3); |
| static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, adt7x10_show_alarm, |
| NULL, ADT7X10_STAT_T_LOW); |
| static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adt7x10_show_alarm, |
| NULL, ADT7X10_STAT_T_HIGH); |
| static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, adt7x10_show_alarm, |
| NULL, ADT7X10_STAT_T_CRIT); |
| static DEVICE_ATTR_RO(name); |
| |
| static struct attribute *adt7x10_attributes[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_min.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp1_min_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group adt7x10_group = { |
| .attrs = adt7x10_attributes, |
| }; |
| |
| int adt7x10_probe(struct device *dev, const char *name, int irq, |
| const struct adt7x10_ops *ops) |
| { |
| struct adt7x10_data *data; |
| int ret; |
| |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->ops = ops; |
| data->name = name; |
| |
| dev_set_drvdata(dev, data); |
| mutex_init(&data->update_lock); |
| |
| /* configure as specified */ |
| ret = adt7x10_read_byte(dev, ADT7X10_CONFIG); |
| if (ret < 0) { |
| dev_dbg(dev, "Can't read config? %d\n", ret); |
| return ret; |
| } |
| data->oldconfig = ret; |
| |
| /* |
| * Set to 16 bit resolution, continous conversion and comparator mode. |
| */ |
| data->config = data->oldconfig; |
| data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY | |
| ADT7X10_INT_POLARITY); |
| data->config |= ADT7X10_FULL | ADT7X10_RESOLUTION | ADT7X10_EVENT_MODE; |
| |
| if (data->config != data->oldconfig) { |
| ret = adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config); |
| if (ret) |
| return ret; |
| } |
| dev_dbg(dev, "Config %02x\n", data->config); |
| |
| ret = adt7x10_fill_cache(dev); |
| if (ret) |
| goto exit_restore; |
| |
| /* Register sysfs hooks */ |
| ret = sysfs_create_group(&dev->kobj, &adt7x10_group); |
| if (ret) |
| goto exit_restore; |
| |
| /* |
| * The I2C device will already have it's own 'name' attribute, but for |
| * the SPI device we need to register it. name will only be non NULL if |
| * the device doesn't register the 'name' attribute on its own. |
| */ |
| if (name) { |
| ret = device_create_file(dev, &dev_attr_name); |
| if (ret) |
| goto exit_remove; |
| } |
| |
| data->hwmon_dev = hwmon_device_register(dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| ret = PTR_ERR(data->hwmon_dev); |
| goto exit_remove_name; |
| } |
| |
| if (irq > 0) { |
| ret = request_threaded_irq(irq, NULL, adt7x10_irq_handler, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| dev_name(dev), dev); |
| if (ret) |
| goto exit_hwmon_device_unregister; |
| } |
| |
| return 0; |
| |
| exit_hwmon_device_unregister: |
| hwmon_device_unregister(data->hwmon_dev); |
| exit_remove_name: |
| if (name) |
| device_remove_file(dev, &dev_attr_name); |
| exit_remove: |
| sysfs_remove_group(&dev->kobj, &adt7x10_group); |
| exit_restore: |
| adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(adt7x10_probe); |
| |
| int adt7x10_remove(struct device *dev, int irq) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| if (irq > 0) |
| free_irq(irq, dev); |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| if (data->name) |
| device_remove_file(dev, &dev_attr_name); |
| sysfs_remove_group(&dev->kobj, &adt7x10_group); |
| if (data->oldconfig != data->config) |
| adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(adt7x10_remove); |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| static int adt7x10_suspend(struct device *dev) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| return adt7x10_write_byte(dev, ADT7X10_CONFIG, |
| data->config | ADT7X10_PD); |
| } |
| |
| static int adt7x10_resume(struct device *dev) |
| { |
| struct adt7x10_data *data = dev_get_drvdata(dev); |
| |
| return adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config); |
| } |
| |
| SIMPLE_DEV_PM_OPS(adt7x10_dev_pm_ops, adt7x10_suspend, adt7x10_resume); |
| EXPORT_SYMBOL_GPL(adt7x10_dev_pm_ops); |
| |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| MODULE_AUTHOR("Hartmut Knaack"); |
| MODULE_DESCRIPTION("ADT7410/ADT7420, ADT7310/ADT7320 common code"); |
| MODULE_LICENSE("GPL"); |