| /* |
| * AXP20x GPIO driver |
| * |
| * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/device.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/axp20x.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #define AXP20X_GPIO_FUNCTIONS 0x7 |
| #define AXP20X_GPIO_FUNCTION_OUT_LOW 0 |
| #define AXP20X_GPIO_FUNCTION_OUT_HIGH 1 |
| #define AXP20X_GPIO_FUNCTION_INPUT 2 |
| |
| struct axp20x_gpio { |
| struct gpio_chip chip; |
| struct regmap *regmap; |
| }; |
| |
| static int axp20x_gpio_get_reg(unsigned offset) |
| { |
| switch (offset) { |
| case 0: |
| return AXP20X_GPIO0_CTRL; |
| case 1: |
| return AXP20X_GPIO1_CTRL; |
| case 2: |
| return AXP20X_GPIO2_CTRL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct axp20x_gpio *gpio = gpiochip_get_data(chip); |
| int reg; |
| |
| reg = axp20x_gpio_get_reg(offset); |
| if (reg < 0) |
| return reg; |
| |
| return regmap_update_bits(gpio->regmap, reg, |
| AXP20X_GPIO_FUNCTIONS, |
| AXP20X_GPIO_FUNCTION_INPUT); |
| } |
| |
| static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct axp20x_gpio *gpio = gpiochip_get_data(chip); |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val); |
| if (ret) |
| return ret; |
| |
| return !!(val & BIT(offset + 4)); |
| } |
| |
| static int axp20x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) |
| { |
| struct axp20x_gpio *gpio = gpiochip_get_data(chip); |
| unsigned int val; |
| int reg, ret; |
| |
| reg = axp20x_gpio_get_reg(offset); |
| if (reg < 0) |
| return reg; |
| |
| ret = regmap_read(gpio->regmap, reg, &val); |
| if (ret) |
| return ret; |
| |
| /* |
| * This shouldn't really happen if the pin is in use already, |
| * or if it's not in use yet, it doesn't matter since we're |
| * going to change the value soon anyway. Default to output. |
| */ |
| if ((val & AXP20X_GPIO_FUNCTIONS) > 2) |
| return 0; |
| |
| /* |
| * The GPIO directions are the three lowest values. |
| * 2 is input, 0 and 1 are output |
| */ |
| return val & 2; |
| } |
| |
| static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| struct axp20x_gpio *gpio = gpiochip_get_data(chip); |
| int reg; |
| |
| reg = axp20x_gpio_get_reg(offset); |
| if (reg < 0) |
| return reg; |
| |
| return regmap_update_bits(gpio->regmap, reg, |
| AXP20X_GPIO_FUNCTIONS, |
| value ? AXP20X_GPIO_FUNCTION_OUT_HIGH |
| : AXP20X_GPIO_FUNCTION_OUT_LOW); |
| } |
| |
| static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| axp20x_gpio_output(chip, offset, value); |
| } |
| |
| static int axp20x_gpio_probe(struct platform_device *pdev) |
| { |
| struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); |
| struct axp20x_gpio *gpio; |
| int ret; |
| |
| if (!of_device_is_available(pdev->dev.of_node)) |
| return -ENODEV; |
| |
| if (!axp20x) { |
| dev_err(&pdev->dev, "Parent drvdata not set\n"); |
| return -EINVAL; |
| } |
| |
| gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); |
| if (!gpio) |
| return -ENOMEM; |
| |
| gpio->chip.base = -1; |
| gpio->chip.can_sleep = true; |
| gpio->chip.parent = &pdev->dev; |
| gpio->chip.label = dev_name(&pdev->dev); |
| gpio->chip.owner = THIS_MODULE; |
| gpio->chip.get = axp20x_gpio_get; |
| gpio->chip.get_direction = axp20x_gpio_get_direction; |
| gpio->chip.set = axp20x_gpio_set; |
| gpio->chip.direction_input = axp20x_gpio_input; |
| gpio->chip.direction_output = axp20x_gpio_output; |
| gpio->chip.ngpio = 3; |
| |
| gpio->regmap = axp20x->regmap; |
| |
| ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to register GPIO chip\n"); |
| return ret; |
| } |
| |
| dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id axp20x_gpio_match[] = { |
| { .compatible = "x-powers,axp209-gpio" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, axp20x_gpio_match); |
| |
| static struct platform_driver axp20x_gpio_driver = { |
| .probe = axp20x_gpio_probe, |
| .driver = { |
| .name = "axp20x-gpio", |
| .of_match_table = axp20x_gpio_match, |
| }, |
| }; |
| |
| module_platform_driver(axp20x_gpio_driver); |
| |
| MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); |
| MODULE_DESCRIPTION("AXP20x PMIC GPIO driver"); |
| MODULE_LICENSE("GPL"); |