drivers/dio/dio.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /* Code to support devices on the DIO and DIO-II bus
  * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
  * Copyright (C) 2004 Jochen Friedrich <jochen@scram.de>
  *
  * This code has basically these routines at the moment:
  * int dio_find(u_int deviceid)
  *    Search the list of DIO devices and return the select code
  *    of the next unconfigured device found that matches the given device ID.
  *    Note that the deviceid parameter should be the encoded ID.
  *    This means that framebuffers should pass it as
  *    DIO_ENCODE_ID(DIO_ID_FBUFFER,DIO_ID2_TOPCAT)
  *    (or whatever); everybody else just uses DIO_ID_FOOBAR.
  * unsigned long dio_scodetophysaddr(int scode)
  *    Return the physical address corresponding to the given select code.
  * int dio_scodetoipl(int scode)
  *    Every DIO card has a fixed interrupt priority level. This function
  *    returns it, whatever it is.
  * const char *dio_scodetoname(int scode)
  *    Return a character string describing this board [might be "" if
  *    not CONFIG_DIO_CONSTANTS]
  * void dio_config_board(int scode)     mark board as configured in the list
  * void dio_unconfig_board(int scode)   mark board as no longer configured
  *
  * This file is based on the way the Amiga port handles Zorro II cards,
  * although we aren't so complicated...
  */
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/dio.h>
 #include <linux/slab.h>                         /* kmalloc() */
 #include <linux/uaccess.h>
 #include <asm/io.h>                             /* readb() */

 struct dio_bus dio_bus = {
 	.resources = {
 		/* DIO range */
 		{ .name = "DIO mem", .start = 0x00600000, .end = 0x007fffff },
 		/* DIO-II range */
 		{ .name = "DIO-II mem", .start = 0x01000000, .end = 0x1fffffff }
 	},
 	.name = "DIO bus"
 };

 /* not a real config option yet! */
 #define CONFIG_DIO_CONSTANTS

 #ifdef CONFIG_DIO_CONSTANTS
 /* We associate each numeric ID with an appropriate descriptive string
  * using a constant array of these structs.
  * FIXME: we should be able to arrange to throw away most of the strings
  * using the initdata stuff. Then we wouldn't need to worry about
  * carrying them around...
  * I think we do this by copying them into newly kmalloc()ed memory and
  * marking the names[] array as .initdata ?
  */
 struct dioname
 {
         int id;
         const char *name;
 };

 /* useful macro */
 #define DIONAME(x) { DIO_ID_##x, DIO_DESC_##x }
 #define DIOFBNAME(x) { DIO_ENCODE_ID( DIO_ID_FBUFFER, DIO_ID2_##x), DIO_DESC2_##x }

 static struct dioname names[] =
 {
         DIONAME(DCA0), DIONAME(DCA0REM), DIONAME(DCA1), DIONAME(DCA1REM),
         DIONAME(DCM), DIONAME(DCMREM),
         DIONAME(LAN),
         DIONAME(FHPIB), DIONAME(NHPIB),
         DIONAME(SCSI0), DIONAME(SCSI1), DIONAME(SCSI2), DIONAME(SCSI3),
         DIONAME(FBUFFER),
         DIONAME(PARALLEL), DIONAME(VME), DIONAME(DCL), DIONAME(DCLREM),
         DIONAME(MISC0), DIONAME(MISC1), DIONAME(MISC2), DIONAME(MISC3),
         DIONAME(MISC4), DIONAME(MISC5), DIONAME(MISC6), DIONAME(MISC7),
         DIONAME(MISC8), DIONAME(MISC9), DIONAME(MISC10), DIONAME(MISC11),
         DIONAME(MISC12), DIONAME(MISC13),
         DIOFBNAME(GATORBOX), DIOFBNAME(TOPCAT), DIOFBNAME(RENAISSANCE),
         DIOFBNAME(LRCATSEYE), DIOFBNAME(HRCCATSEYE), DIOFBNAME(HRMCATSEYE),
         DIOFBNAME(DAVINCI), DIOFBNAME(XXXCATSEYE), DIOFBNAME(HYPERION),
         DIOFBNAME(XGENESIS), DIOFBNAME(TIGER), DIOFBNAME(YGENESIS)
 };

 #undef DIONAME
 #undef DIOFBNAME

 static const char *unknowndioname
         = "unknown DIO board -- please email <linux-m68k@lists.linux-m68k.org>!";

 static const char *dio_getname(int id)
 {
         /* return pointer to a constant string describing the board with given ID */
 	unsigned int i;
 	for (i = 0; i < ARRAY_SIZE(names); i++)
                 if (names[i].id == id)
                         return names[i].name;

         return unknowndioname;
 }

 #else

 static char dio_no_name[] = { 0 };
 #define dio_getname(_id)	(dio_no_name)

 #endif /* CONFIG_DIO_CONSTANTS */

 static void dio_dev_release(struct device *dev)
 {
 	struct dio_dev *ddev = container_of(dev, typeof(struct dio_dev), dev);
 	kfree(ddev);
 }

 int __init dio_find(int deviceid)
 {
 	/* Called to find a DIO device before the full bus scan has run.
 	 * Only used by the console driver.
 	 */
 	int scode, id;
 	u_char prid, secid, i;

 	for (scode = 0; scode < DIO_SCMAX; scode++) {
 		void *va;
 		unsigned long pa;

                 if (DIO_SCINHOLE(scode))
                         continue;

                 pa = dio_scodetophysaddr(scode);

 		if (!pa)
 			continue;

 		if (scode < DIOII_SCBASE)
 			va = (void *)(pa + DIO_VIRADDRBASE);
 		else
 			va = ioremap(pa, PAGE_SIZE);

                 if (probe_kernel_read(&i, (unsigned char *)va + DIO_IDOFF, 1)) {
 			if (scode >= DIOII_SCBASE)
 				iounmap(va);
                         continue;             /* no board present at that select code */
 		}

 		prid = DIO_ID(va);

                 if (DIO_NEEDSSECID(prid)) {
                         secid = DIO_SECID(va);
                         id = DIO_ENCODE_ID(prid, secid);
                 } else
 			id = prid;

 		if (id == deviceid) {
 			if (scode >= DIOII_SCBASE)
 				iounmap(va);
 			return scode;
 		}
 	}

 	return -1;
 }

 /* This is the function that scans the DIO space and works out what
  * hardware is actually present.
  */
 static int __init dio_init(void)
 {
 	int scode;
 	int i;
 	struct dio_dev *dev;
 	int error;

 	if (!MACH_IS_HP300)
 		return 0;

         printk(KERN_INFO "Scanning for DIO devices...\n");

 	/* Initialize the DIO bus */
 	INIT_LIST_HEAD(&dio_bus.devices);
 	dev_set_name(&dio_bus.dev, "dio");
 	error = device_register(&dio_bus.dev);
 	if (error) {
 		pr_err("DIO: Error registering dio_bus\n");
 		return error;
 	}

 	/* Request all resources */
 	dio_bus.num_resources = (hp300_model == HP_320 ? 1 : 2);
 	for (i = 0; i < dio_bus.num_resources; i++)
 		request_resource(&iomem_resource, &dio_bus.resources[i]);

 	/* Register all devices */
         for (scode = 0; scode < DIO_SCMAX; ++scode)
         {
                 u_char prid, secid = 0;        /* primary, secondary ID bytes */
                 u_char *va;
 		unsigned long pa;

                 if (DIO_SCINHOLE(scode))
                         continue;

 		pa = dio_scodetophysaddr(scode);

 		if (!pa)
 			continue;

 		if (scode < DIOII_SCBASE)
 			va = (void *)(pa + DIO_VIRADDRBASE);
 		else
 			va = ioremap(pa, PAGE_SIZE);

                 if (probe_kernel_read(&i, (unsigned char *)va + DIO_IDOFF, 1)) {
 			if (scode >= DIOII_SCBASE)
 				iounmap(va);
                         continue;              /* no board present at that select code */
 		}

                 /* Found a board, allocate it an entry in the list */
 		dev = kzalloc(sizeof(struct dio_dev), GFP_KERNEL);
 		if (!dev)
 			return 0;

 		dev->bus = &dio_bus;
 		dev->dev.parent = &dio_bus.dev;
 		dev->dev.bus = &dio_bus_type;
 		dev->dev.release = dio_dev_release;
 		dev->scode = scode;
 		dev->resource.start = pa;
 		dev->resource.end = pa + DIO_SIZE(scode, va);
 		dev_set_name(&dev->dev, "%02x", scode);

                 /* read the ID byte(s) and encode if necessary. */
 		prid = DIO_ID(va);

                 if (DIO_NEEDSSECID(prid)) {
                         secid = DIO_SECID(va);
                         dev->id = DIO_ENCODE_ID(prid, secid);
                 } else
                         dev->id = prid;

                 dev->ipl = DIO_IPL(va);
                 strcpy(dev->name,dio_getname(dev->id));
                 printk(KERN_INFO "select code %3d: ipl %d: ID %02X", dev->scode, dev->ipl, prid);
                 if (DIO_NEEDSSECID(prid))
                         printk(":%02X", secid);
                 printk(": %s\n", dev->name);

 		if (scode >= DIOII_SCBASE)
 			iounmap(va);
 		error = device_register(&dev->dev);
 		if (error) {
 			pr_err("DIO: Error registering device %s\n",
 			       dev->name);
 			put_device(&dev->dev);
 			continue;
 		}
 		error = dio_create_sysfs_dev_files(dev);
 		if (error)
 			dev_err(&dev->dev, "Error creating sysfs files\n");
         }
 	return 0;
 }

 subsys_initcall(dio_init);

 /* Bear in mind that this is called in the very early stages of initialisation
  * in order to get the address of the serial port for the console...
  */
 unsigned long dio_scodetophysaddr(int scode)
 {
         if (scode >= DIOII_SCBASE) {
                 return (DIOII_BASE + (scode - 132) * DIOII_DEVSIZE);
         } else if (scode > DIO_SCMAX || scode < 0)
                 return 0;
         else if (DIO_SCINHOLE(scode))
                 return 0;

         return (DIO_BASE + scode * DIO_DEVSIZE);
 }
	// SPDX-License-Identifier: GPL-2.0
	/* Code to support devices on the DIO and DIO-II bus
	* Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
	* Copyright (C) 2004 Jochen Friedrich <jochen@scram.de>
	*
	* This code has basically these routines at the moment:
	* int dio_find(u_int deviceid)
	* Search the list of DIO devices and return the select code
	* of the next unconfigured device found that matches the given device ID.
	* Note that the deviceid parameter should be the encoded ID.
	* This means that framebuffers should pass it as
	* DIO_ENCODE_ID(DIO_ID_FBUFFER,DIO_ID2_TOPCAT)
	* (or whatever); everybody else just uses DIO_ID_FOOBAR.
	* unsigned long dio_scodetophysaddr(int scode)
	* Return the physical address corresponding to the given select code.
	* int dio_scodetoipl(int scode)
	* Every DIO card has a fixed interrupt priority level. This function
	* returns it, whatever it is.
	* const char *dio_scodetoname(int scode)
	* Return a character string describing this board [might be "" if
	* not CONFIG_DIO_CONSTANTS]
	* void dio_config_board(int scode) mark board as configured in the list
	* void dio_unconfig_board(int scode) mark board as no longer configured
	*
	* This file is based on the way the Amiga port handles Zorro II cards,
	* although we aren't so complicated...
	*/
	#include <linux/module.h>
	#include <linux/string.h>
	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/dio.h>
	#include <linux/slab.h> /* kmalloc() */
	#include <linux/uaccess.h>
	#include <asm/io.h> /* readb() */

	struct dio_bus dio_bus = {
	.resources = {
	/* DIO range */
	{ .name = "DIO mem", .start = 0x00600000, .end = 0x007fffff },
	/* DIO-II range */
	{ .name = "DIO-II mem", .start = 0x01000000, .end = 0x1fffffff }
	},
	.name = "DIO bus"
	};

	/* not a real config option yet! */
	#define CONFIG_DIO_CONSTANTS

	#ifdef CONFIG_DIO_CONSTANTS
	/* We associate each numeric ID with an appropriate descriptive string
	* using a constant array of these structs.
	* FIXME: we should be able to arrange to throw away most of the strings
	* using the initdata stuff. Then we wouldn't need to worry about
	* carrying them around...
	* I think we do this by copying them into newly kmalloc()ed memory and
	* marking the names[] array as .initdata ?
	*/
	struct dioname
	{
	int id;
	const char *name;
	};

	/* useful macro */
	#define DIONAME(x) { DIO_ID_##x, DIO_DESC_##x }
	#define DIOFBNAME(x) { DIO_ENCODE_ID( DIO_ID_FBUFFER, DIO_ID2_##x), DIO_DESC2_##x }

	static struct dioname names[] =
	{
	DIONAME(DCA0), DIONAME(DCA0REM), DIONAME(DCA1), DIONAME(DCA1REM),
	DIONAME(DCM), DIONAME(DCMREM),
	DIONAME(LAN),
	DIONAME(FHPIB), DIONAME(NHPIB),
	DIONAME(SCSI0), DIONAME(SCSI1), DIONAME(SCSI2), DIONAME(SCSI3),
	DIONAME(FBUFFER),
	DIONAME(PARALLEL), DIONAME(VME), DIONAME(DCL), DIONAME(DCLREM),
	DIONAME(MISC0), DIONAME(MISC1), DIONAME(MISC2), DIONAME(MISC3),
	DIONAME(MISC4), DIONAME(MISC5), DIONAME(MISC6), DIONAME(MISC7),
	DIONAME(MISC8), DIONAME(MISC9), DIONAME(MISC10), DIONAME(MISC11),
	DIONAME(MISC12), DIONAME(MISC13),
	DIOFBNAME(GATORBOX), DIOFBNAME(TOPCAT), DIOFBNAME(RENAISSANCE),
	DIOFBNAME(LRCATSEYE), DIOFBNAME(HRCCATSEYE), DIOFBNAME(HRMCATSEYE),
	DIOFBNAME(DAVINCI), DIOFBNAME(XXXCATSEYE), DIOFBNAME(HYPERION),
	DIOFBNAME(XGENESIS), DIOFBNAME(TIGER), DIOFBNAME(YGENESIS)
	};

	#undef DIONAME
	#undef DIOFBNAME

	static const char *unknowndioname
	= "unknown DIO board -- please email <linux-m68k@lists.linux-m68k.org>!";

	static const char *dio_getname(int id)
	{
	/* return pointer to a constant string describing the board with given ID */
	unsigned int i;
	for (i = 0; i < ARRAY_SIZE(names); i++)
	if (names[i].id == id)
	return names[i].name;

	return unknowndioname;
	}

	#else

	static char dio_no_name[] = { 0 };
	#define dio_getname(_id) (dio_no_name)

	#endif /* CONFIG_DIO_CONSTANTS */

	static void dio_dev_release(struct device *dev)
	{
	struct dio_dev *ddev = container_of(dev, typeof(struct dio_dev), dev);
	kfree(ddev);
	}

	int __init dio_find(int deviceid)
	{
	/* Called to find a DIO device before the full bus scan has run.
	* Only used by the console driver.
	*/
	int scode, id;
	u_char prid, secid, i;

	for (scode = 0; scode < DIO_SCMAX; scode++) {
	void *va;
	unsigned long pa;

	if (DIO_SCINHOLE(scode))
	continue;

	pa = dio_scodetophysaddr(scode);

	if (!pa)
	continue;

	if (scode < DIOII_SCBASE)
	va = (void *)(pa + DIO_VIRADDRBASE);
	else
	va = ioremap(pa, PAGE_SIZE);

	if (probe_kernel_read(&i, (unsigned char *)va + DIO_IDOFF, 1)) {
	if (scode >= DIOII_SCBASE)
	iounmap(va);
	continue; /* no board present at that select code */
	}

	prid = DIO_ID(va);

	if (DIO_NEEDSSECID(prid)) {
	secid = DIO_SECID(va);
	id = DIO_ENCODE_ID(prid, secid);
	} else
	id = prid;

	if (id == deviceid) {
	if (scode >= DIOII_SCBASE)
	iounmap(va);
	return scode;
	}
	}

	return -1;
	}

	/* This is the function that scans the DIO space and works out what
	* hardware is actually present.
	*/
	static int __init dio_init(void)
	{
	int scode;
	int i;
	struct dio_dev *dev;
	int error;

	if (!MACH_IS_HP300)
	return 0;

	printk(KERN_INFO "Scanning for DIO devices...\n");

	/* Initialize the DIO bus */
	INIT_LIST_HEAD(&dio_bus.devices);
	dev_set_name(&dio_bus.dev, "dio");
	error = device_register(&dio_bus.dev);
	if (error) {
	pr_err("DIO: Error registering dio_bus\n");
	return error;
	}

	/* Request all resources */
	dio_bus.num_resources = (hp300_model == HP_320 ? 1 : 2);
	for (i = 0; i < dio_bus.num_resources; i++)
	request_resource(&iomem_resource, &dio_bus.resources[i]);

	/* Register all devices */
	for (scode = 0; scode < DIO_SCMAX; ++scode)
	{
	u_char prid, secid = 0; /* primary, secondary ID bytes */
	u_char *va;
	unsigned long pa;

	if (DIO_SCINHOLE(scode))
	continue;

	pa = dio_scodetophysaddr(scode);

	if (!pa)
	continue;

	if (scode < DIOII_SCBASE)
	va = (void *)(pa + DIO_VIRADDRBASE);
	else
	va = ioremap(pa, PAGE_SIZE);

	if (probe_kernel_read(&i, (unsigned char *)va + DIO_IDOFF, 1)) {
	if (scode >= DIOII_SCBASE)
	iounmap(va);
	continue; /* no board present at that select code */
	}

	/* Found a board, allocate it an entry in the list */
	dev = kzalloc(sizeof(struct dio_dev), GFP_KERNEL);
	if (!dev)
	return 0;

	dev->bus = &dio_bus;
	dev->dev.parent = &dio_bus.dev;
	dev->dev.bus = &dio_bus_type;
	dev->dev.release = dio_dev_release;
	dev->scode = scode;
	dev->resource.start = pa;
	dev->resource.end = pa + DIO_SIZE(scode, va);
	dev_set_name(&dev->dev, "%02x", scode);

	/* read the ID byte(s) and encode if necessary. */
	prid = DIO_ID(va);

	if (DIO_NEEDSSECID(prid)) {
	secid = DIO_SECID(va);
	dev->id = DIO_ENCODE_ID(prid, secid);
	} else
	dev->id = prid;

	dev->ipl = DIO_IPL(va);
	strcpy(dev->name,dio_getname(dev->id));
	printk(KERN_INFO "select code %3d: ipl %d: ID %02X", dev->scode, dev->ipl, prid);
	if (DIO_NEEDSSECID(prid))
	printk(":%02X", secid);
	printk(": %s\n", dev->name);

	if (scode >= DIOII_SCBASE)
	iounmap(va);
	error = device_register(&dev->dev);
	if (error) {
	pr_err("DIO: Error registering device %s\n",
	dev->name);
	put_device(&dev->dev);
	continue;
	}
	error = dio_create_sysfs_dev_files(dev);
	if (error)
	dev_err(&dev->dev, "Error creating sysfs files\n");
	}
	return 0;
	}

	subsys_initcall(dio_init);

	/* Bear in mind that this is called in the very early stages of initialisation
	* in order to get the address of the serial port for the console...
	*/
	unsigned long dio_scodetophysaddr(int scode)
	{
	if (scode >= DIOII_SCBASE) {
	return (DIOII_BASE + (scode - 132) * DIOII_DEVSIZE);
	} else if (scode > DIO_SCMAX \|\| scode < 0)
	return 0;
	else if (DIO_SCINHOLE(scode))
	return 0;

	return (DIO_BASE + scode * DIO_DEVSIZE);
	}