| /* |
| * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Common Clock Framework support for S3C2410 and following SoCs. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/syscore_ops.h> |
| |
| #include <dt-bindings/clock/s3c2410.h> |
| |
| #include "clk.h" |
| #include "clk-pll.h" |
| |
| #define LOCKTIME 0x00 |
| #define MPLLCON 0x04 |
| #define UPLLCON 0x08 |
| #define CLKCON 0x0c |
| #define CLKSLOW 0x10 |
| #define CLKDIVN 0x14 |
| #define CAMDIVN 0x18 |
| |
| /* the soc types */ |
| enum supported_socs { |
| S3C2410, |
| S3C2440, |
| S3C2442, |
| }; |
| |
| /* list of PLLs to be registered */ |
| enum s3c2410_plls { |
| mpll, upll, |
| }; |
| |
| static void __iomem *reg_base; |
| |
| #ifdef CONFIG_PM_SLEEP |
| static struct samsung_clk_reg_dump *s3c2410_save; |
| |
| /* |
| * list of controller registers to be saved and restored during a |
| * suspend/resume cycle. |
| */ |
| static unsigned long s3c2410_clk_regs[] __initdata = { |
| LOCKTIME, |
| MPLLCON, |
| UPLLCON, |
| CLKCON, |
| CLKSLOW, |
| CLKDIVN, |
| CAMDIVN, |
| }; |
| |
| static int s3c2410_clk_suspend(void) |
| { |
| samsung_clk_save(reg_base, s3c2410_save, |
| ARRAY_SIZE(s3c2410_clk_regs)); |
| |
| return 0; |
| } |
| |
| static void s3c2410_clk_resume(void) |
| { |
| samsung_clk_restore(reg_base, s3c2410_save, |
| ARRAY_SIZE(s3c2410_clk_regs)); |
| } |
| |
| static struct syscore_ops s3c2410_clk_syscore_ops = { |
| .suspend = s3c2410_clk_suspend, |
| .resume = s3c2410_clk_resume, |
| }; |
| |
| static void __init s3c2410_clk_sleep_init(void) |
| { |
| s3c2410_save = samsung_clk_alloc_reg_dump(s3c2410_clk_regs, |
| ARRAY_SIZE(s3c2410_clk_regs)); |
| if (!s3c2410_save) { |
| pr_warn("%s: failed to allocate sleep save data, no sleep support!\n", |
| __func__); |
| return; |
| } |
| |
| register_syscore_ops(&s3c2410_clk_syscore_ops); |
| return; |
| } |
| #else |
| static void __init s3c2410_clk_sleep_init(void) {} |
| #endif |
| |
| PNAME(fclk_p) = { "mpll", "div_slow" }; |
| |
| struct samsung_mux_clock s3c2410_common_muxes[] __initdata = { |
| MUX(FCLK, "fclk", fclk_p, CLKSLOW, 4, 1), |
| }; |
| |
| static struct clk_div_table divslow_d[] = { |
| { .val = 0, .div = 1 }, |
| { .val = 1, .div = 2 }, |
| { .val = 2, .div = 4 }, |
| { .val = 3, .div = 6 }, |
| { .val = 4, .div = 8 }, |
| { .val = 5, .div = 10 }, |
| { .val = 6, .div = 12 }, |
| { .val = 7, .div = 14 }, |
| { /* sentinel */ }, |
| }; |
| |
| struct samsung_div_clock s3c2410_common_dividers[] __initdata = { |
| DIV_T(0, "div_slow", "xti", CLKSLOW, 0, 3, divslow_d), |
| DIV(PCLK, "pclk", "hclk", CLKDIVN, 0, 1), |
| }; |
| |
| struct samsung_gate_clock s3c2410_common_gates[] __initdata = { |
| GATE(PCLK_SPI, "spi", "pclk", CLKCON, 18, 0, 0), |
| GATE(PCLK_I2S, "i2s", "pclk", CLKCON, 17, 0, 0), |
| GATE(PCLK_I2C, "i2c", "pclk", CLKCON, 16, 0, 0), |
| GATE(PCLK_ADC, "adc", "pclk", CLKCON, 15, 0, 0), |
| GATE(PCLK_RTC, "rtc", "pclk", CLKCON, 14, 0, 0), |
| GATE(PCLK_GPIO, "gpio", "pclk", CLKCON, 13, CLK_IGNORE_UNUSED, 0), |
| GATE(PCLK_UART2, "uart2", "pclk", CLKCON, 12, 0, 0), |
| GATE(PCLK_UART1, "uart1", "pclk", CLKCON, 11, 0, 0), |
| GATE(PCLK_UART0, "uart0", "pclk", CLKCON, 10, 0, 0), |
| GATE(PCLK_SDI, "sdi", "pclk", CLKCON, 9, 0, 0), |
| GATE(PCLK_PWM, "pwm", "pclk", CLKCON, 8, 0, 0), |
| GATE(HCLK_USBD, "usb-device", "hclk", CLKCON, 7, 0, 0), |
| GATE(HCLK_USBH, "usb-host", "hclk", CLKCON, 6, 0, 0), |
| GATE(HCLK_LCD, "lcd", "hclk", CLKCON, 5, 0, 0), |
| GATE(HCLK_NAND, "nand", "hclk", CLKCON, 4, 0, 0), |
| }; |
| |
| /* should be added _after_ the soc-specific clocks are created */ |
| struct samsung_clock_alias s3c2410_common_aliases[] __initdata = { |
| ALIAS(PCLK_I2C, "s3c2410-i2c.0", "i2c"), |
| ALIAS(PCLK_ADC, NULL, "adc"), |
| ALIAS(PCLK_RTC, NULL, "rtc"), |
| ALIAS(PCLK_PWM, NULL, "timers"), |
| ALIAS(HCLK_LCD, NULL, "lcd"), |
| ALIAS(HCLK_USBD, NULL, "usb-device"), |
| ALIAS(HCLK_USBH, NULL, "usb-host"), |
| ALIAS(UCLK, NULL, "usb-bus-host"), |
| ALIAS(UCLK, NULL, "usb-bus-gadget"), |
| ALIAS(ARMCLK, NULL, "armclk"), |
| ALIAS(UCLK, NULL, "uclk"), |
| ALIAS(HCLK, NULL, "hclk"), |
| ALIAS(MPLL, NULL, "mpll"), |
| ALIAS(FCLK, NULL, "fclk"), |
| ALIAS(PCLK, NULL, "watchdog"), |
| ALIAS(PCLK_SDI, NULL, "sdi"), |
| ALIAS(HCLK_NAND, NULL, "nand"), |
| ALIAS(PCLK_I2S, NULL, "iis"), |
| ALIAS(PCLK_I2C, NULL, "i2c"), |
| }; |
| |
| /* S3C2410 specific clocks */ |
| |
| static struct samsung_pll_rate_table pll_s3c2410_12mhz_tbl[] __initdata = { |
| /* sorted in descending order */ |
| /* 2410A extras */ |
| PLL_35XX_RATE(270000000, 127, 1, 1), |
| PLL_35XX_RATE(268000000, 126, 1, 1), |
| PLL_35XX_RATE(266000000, 125, 1, 1), |
| PLL_35XX_RATE(226000000, 105, 1, 1), |
| PLL_35XX_RATE(210000000, 132, 2, 1), |
| /* 2410 common */ |
| PLL_35XX_RATE(202800000, 161, 3, 1), |
| PLL_35XX_RATE(192000000, 88, 1, 1), |
| PLL_35XX_RATE(186000000, 85, 1, 1), |
| PLL_35XX_RATE(180000000, 82, 1, 1), |
| PLL_35XX_RATE(170000000, 77, 1, 1), |
| PLL_35XX_RATE(158000000, 71, 1, 1), |
| PLL_35XX_RATE(152000000, 68, 1, 1), |
| PLL_35XX_RATE(147000000, 90, 2, 1), |
| PLL_35XX_RATE(135000000, 82, 2, 1), |
| PLL_35XX_RATE(124000000, 116, 1, 2), |
| PLL_35XX_RATE(118500000, 150, 2, 2), |
| PLL_35XX_RATE(113000000, 105, 1, 2), |
| PLL_35XX_RATE(101250000, 127, 2, 2), |
| PLL_35XX_RATE(90000000, 112, 2, 2), |
| PLL_35XX_RATE(84750000, 105, 2, 2), |
| PLL_35XX_RATE(79000000, 71, 1, 2), |
| PLL_35XX_RATE(67500000, 82, 2, 2), |
| PLL_35XX_RATE(56250000, 142, 2, 3), |
| PLL_35XX_RATE(48000000, 120, 2, 3), |
| PLL_35XX_RATE(50700000, 161, 3, 3), |
| PLL_35XX_RATE(45000000, 82, 1, 3), |
| PLL_35XX_RATE(33750000, 82, 2, 3), |
| { /* sentinel */ }, |
| }; |
| |
| static struct samsung_pll_clock s3c2410_plls[] __initdata = { |
| [mpll] = PLL(pll_s3c2410_mpll, MPLL, "mpll", "xti", |
| LOCKTIME, MPLLCON, NULL), |
| [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", |
| LOCKTIME, UPLLCON, NULL), |
| }; |
| |
| struct samsung_div_clock s3c2410_dividers[] __initdata = { |
| DIV(HCLK, "hclk", "mpll", CLKDIVN, 1, 1), |
| }; |
| |
| struct samsung_fixed_factor_clock s3c2410_ffactor[] __initdata = { |
| /* |
| * armclk is directly supplied by the fclk, without |
| * switching possibility like on the s3c244x below. |
| */ |
| FFACTOR(ARMCLK, "armclk", "fclk", 1, 1, 0), |
| |
| /* uclk is fed from the unmodified upll */ |
| FFACTOR(UCLK, "uclk", "upll", 1, 1, 0), |
| }; |
| |
| struct samsung_clock_alias s3c2410_aliases[] __initdata = { |
| ALIAS(PCLK_UART0, "s3c2410-uart.0", "uart"), |
| ALIAS(PCLK_UART1, "s3c2410-uart.1", "uart"), |
| ALIAS(PCLK_UART2, "s3c2410-uart.2", "uart"), |
| ALIAS(PCLK_UART0, "s3c2410-uart.0", "clk_uart_baud0"), |
| ALIAS(PCLK_UART1, "s3c2410-uart.1", "clk_uart_baud0"), |
| ALIAS(PCLK_UART2, "s3c2410-uart.2", "clk_uart_baud0"), |
| ALIAS(UCLK, NULL, "clk_uart_baud1"), |
| }; |
| |
| /* S3C244x specific clocks */ |
| |
| static struct samsung_pll_rate_table pll_s3c244x_12mhz_tbl[] __initdata = { |
| /* sorted in descending order */ |
| PLL_35XX_RATE(400000000, 0x5c, 1, 1), |
| PLL_35XX_RATE(390000000, 0x7a, 2, 1), |
| PLL_35XX_RATE(380000000, 0x57, 1, 1), |
| PLL_35XX_RATE(370000000, 0xb1, 4, 1), |
| PLL_35XX_RATE(360000000, 0x70, 2, 1), |
| PLL_35XX_RATE(350000000, 0xa7, 4, 1), |
| PLL_35XX_RATE(340000000, 0x4d, 1, 1), |
| PLL_35XX_RATE(330000000, 0x66, 2, 1), |
| PLL_35XX_RATE(320000000, 0x98, 4, 1), |
| PLL_35XX_RATE(310000000, 0x93, 4, 1), |
| PLL_35XX_RATE(300000000, 0x75, 3, 1), |
| PLL_35XX_RATE(240000000, 0x70, 1, 2), |
| PLL_35XX_RATE(230000000, 0x6b, 1, 2), |
| PLL_35XX_RATE(220000000, 0x66, 1, 2), |
| PLL_35XX_RATE(210000000, 0x84, 2, 2), |
| PLL_35XX_RATE(200000000, 0x5c, 1, 2), |
| PLL_35XX_RATE(190000000, 0x57, 1, 2), |
| PLL_35XX_RATE(180000000, 0x70, 2, 2), |
| PLL_35XX_RATE(170000000, 0x4d, 1, 2), |
| PLL_35XX_RATE(160000000, 0x98, 4, 2), |
| PLL_35XX_RATE(150000000, 0x75, 3, 2), |
| PLL_35XX_RATE(120000000, 0x70, 1, 3), |
| PLL_35XX_RATE(110000000, 0x66, 1, 3), |
| PLL_35XX_RATE(100000000, 0x5c, 1, 3), |
| PLL_35XX_RATE(90000000, 0x70, 2, 3), |
| PLL_35XX_RATE(80000000, 0x98, 4, 3), |
| PLL_35XX_RATE(75000000, 0x75, 3, 3), |
| { /* sentinel */ }, |
| }; |
| |
| static struct samsung_pll_clock s3c244x_common_plls[] __initdata = { |
| [mpll] = PLL(pll_s3c2440_mpll, MPLL, "mpll", "xti", |
| LOCKTIME, MPLLCON, NULL), |
| [upll] = PLL(pll_s3c2410_upll, UPLL, "upll", "xti", |
| LOCKTIME, UPLLCON, NULL), |
| }; |
| |
| PNAME(hclk_p) = { "fclk", "div_hclk_2", "div_hclk_4", "div_hclk_3" }; |
| PNAME(armclk_p) = { "fclk", "hclk" }; |
| |
| struct samsung_mux_clock s3c244x_common_muxes[] __initdata = { |
| MUX(HCLK, "hclk", hclk_p, CLKDIVN, 1, 2), |
| MUX(ARMCLK, "armclk", armclk_p, CAMDIVN, 12, 1), |
| }; |
| |
| struct samsung_fixed_factor_clock s3c244x_common_ffactor[] __initdata = { |
| FFACTOR(0, "div_hclk_2", "fclk", 1, 2, 0), |
| FFACTOR(0, "ff_cam", "div_cam", 2, 1, CLK_SET_RATE_PARENT), |
| }; |
| |
| static struct clk_div_table div_hclk_4_d[] = { |
| { .val = 0, .div = 4 }, |
| { .val = 1, .div = 8 }, |
| { /* sentinel */ }, |
| }; |
| |
| static struct clk_div_table div_hclk_3_d[] = { |
| { .val = 0, .div = 3 }, |
| { .val = 1, .div = 6 }, |
| { /* sentinel */ }, |
| }; |
| |
| struct samsung_div_clock s3c244x_common_dividers[] __initdata = { |
| DIV(UCLK, "uclk", "upll", CLKDIVN, 3, 1), |
| DIV(0, "div_hclk", "fclk", CLKDIVN, 1, 1), |
| DIV_T(0, "div_hclk_4", "fclk", CAMDIVN, 9, 1, div_hclk_4_d), |
| DIV_T(0, "div_hclk_3", "fclk", CAMDIVN, 8, 1, div_hclk_3_d), |
| DIV(0, "div_cam", "upll", CAMDIVN, 0, 3), |
| }; |
| |
| struct samsung_gate_clock s3c244x_common_gates[] __initdata = { |
| GATE(HCLK_CAM, "cam", "hclk", CLKCON, 19, 0, 0), |
| }; |
| |
| struct samsung_clock_alias s3c244x_common_aliases[] __initdata = { |
| ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"), |
| ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"), |
| ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"), |
| ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"), |
| ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"), |
| ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"), |
| ALIAS(HCLK_CAM, NULL, "camif"), |
| ALIAS(CAMIF, NULL, "camif-upll"), |
| }; |
| |
| /* S3C2440 specific clocks */ |
| |
| PNAME(s3c2440_camif_p) = { "upll", "ff_cam" }; |
| |
| struct samsung_mux_clock s3c2440_muxes[] __initdata = { |
| MUX(CAMIF, "camif", s3c2440_camif_p, CAMDIVN, 4, 1), |
| }; |
| |
| struct samsung_gate_clock s3c2440_gates[] __initdata = { |
| GATE(PCLK_AC97, "ac97", "pclk", CLKCON, 20, 0, 0), |
| }; |
| |
| /* S3C2442 specific clocks */ |
| |
| struct samsung_fixed_factor_clock s3c2442_ffactor[] __initdata = { |
| FFACTOR(0, "upll_3", "upll", 1, 3, 0), |
| }; |
| |
| PNAME(s3c2442_camif_p) = { "upll", "ff_cam", "upll", "upll_3" }; |
| |
| struct samsung_mux_clock s3c2442_muxes[] __initdata = { |
| MUX(CAMIF, "camif", s3c2442_camif_p, CAMDIVN, 4, 2), |
| }; |
| |
| /* |
| * fixed rate clocks generated outside the soc |
| * Only necessary until the devicetree-move is complete |
| */ |
| #define XTI 1 |
| struct samsung_fixed_rate_clock s3c2410_common_frate_clks[] __initdata = { |
| FRATE(XTI, "xti", NULL, 0, 0), |
| }; |
| |
| static void __init s3c2410_common_clk_register_fixed_ext( |
| struct samsung_clk_provider *ctx, |
| unsigned long xti_f) |
| { |
| struct samsung_clock_alias xti_alias = ALIAS(XTI, NULL, "xtal"); |
| |
| s3c2410_common_frate_clks[0].fixed_rate = xti_f; |
| samsung_clk_register_fixed_rate(ctx, s3c2410_common_frate_clks, |
| ARRAY_SIZE(s3c2410_common_frate_clks)); |
| |
| samsung_clk_register_alias(ctx, &xti_alias, 1); |
| } |
| |
| void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, |
| int current_soc, |
| void __iomem *base) |
| { |
| struct samsung_clk_provider *ctx; |
| reg_base = base; |
| |
| if (np) { |
| reg_base = of_iomap(np, 0); |
| if (!reg_base) |
| panic("%s: failed to map registers\n", __func__); |
| } |
| |
| ctx = samsung_clk_init(np, reg_base, NR_CLKS); |
| |
| /* Register external clocks only in non-dt cases */ |
| if (!np) |
| s3c2410_common_clk_register_fixed_ext(ctx, xti_f); |
| |
| if (current_soc == S3C2410) { |
| if (_get_rate("xti") == 12 * MHZ) { |
| s3c2410_plls[mpll].rate_table = pll_s3c2410_12mhz_tbl; |
| s3c2410_plls[upll].rate_table = pll_s3c2410_12mhz_tbl; |
| } |
| |
| /* Register PLLs. */ |
| samsung_clk_register_pll(ctx, s3c2410_plls, |
| ARRAY_SIZE(s3c2410_plls), reg_base); |
| |
| } else { /* S3C2440, S3C2442 */ |
| if (_get_rate("xti") == 12 * MHZ) { |
| /* |
| * plls follow different calculation schemes, with the |
| * upll following the same scheme as the s3c2410 plls |
| */ |
| s3c244x_common_plls[mpll].rate_table = |
| pll_s3c244x_12mhz_tbl; |
| s3c244x_common_plls[upll].rate_table = |
| pll_s3c2410_12mhz_tbl; |
| } |
| |
| /* Register PLLs. */ |
| samsung_clk_register_pll(ctx, s3c244x_common_plls, |
| ARRAY_SIZE(s3c244x_common_plls), reg_base); |
| } |
| |
| /* Register common internal clocks. */ |
| samsung_clk_register_mux(ctx, s3c2410_common_muxes, |
| ARRAY_SIZE(s3c2410_common_muxes)); |
| samsung_clk_register_div(ctx, s3c2410_common_dividers, |
| ARRAY_SIZE(s3c2410_common_dividers)); |
| samsung_clk_register_gate(ctx, s3c2410_common_gates, |
| ARRAY_SIZE(s3c2410_common_gates)); |
| |
| if (current_soc == S3C2440 || current_soc == S3C2442) { |
| samsung_clk_register_div(ctx, s3c244x_common_dividers, |
| ARRAY_SIZE(s3c244x_common_dividers)); |
| samsung_clk_register_gate(ctx, s3c244x_common_gates, |
| ARRAY_SIZE(s3c244x_common_gates)); |
| samsung_clk_register_mux(ctx, s3c244x_common_muxes, |
| ARRAY_SIZE(s3c244x_common_muxes)); |
| samsung_clk_register_fixed_factor(ctx, s3c244x_common_ffactor, |
| ARRAY_SIZE(s3c244x_common_ffactor)); |
| } |
| |
| /* Register SoC-specific clocks. */ |
| switch (current_soc) { |
| case S3C2410: |
| samsung_clk_register_div(ctx, s3c2410_dividers, |
| ARRAY_SIZE(s3c2410_dividers)); |
| samsung_clk_register_fixed_factor(ctx, s3c2410_ffactor, |
| ARRAY_SIZE(s3c2410_ffactor)); |
| samsung_clk_register_alias(ctx, s3c2410_aliases, |
| ARRAY_SIZE(s3c2410_aliases)); |
| break; |
| case S3C2440: |
| samsung_clk_register_mux(ctx, s3c2440_muxes, |
| ARRAY_SIZE(s3c2440_muxes)); |
| samsung_clk_register_gate(ctx, s3c2440_gates, |
| ARRAY_SIZE(s3c2440_gates)); |
| break; |
| case S3C2442: |
| samsung_clk_register_mux(ctx, s3c2442_muxes, |
| ARRAY_SIZE(s3c2442_muxes)); |
| samsung_clk_register_fixed_factor(ctx, s3c2442_ffactor, |
| ARRAY_SIZE(s3c2442_ffactor)); |
| break; |
| } |
| |
| /* |
| * Register common aliases at the end, as some of the aliased clocks |
| * are SoC specific. |
| */ |
| samsung_clk_register_alias(ctx, s3c2410_common_aliases, |
| ARRAY_SIZE(s3c2410_common_aliases)); |
| |
| if (current_soc == S3C2440 || current_soc == S3C2442) { |
| samsung_clk_register_alias(ctx, s3c244x_common_aliases, |
| ARRAY_SIZE(s3c244x_common_aliases)); |
| } |
| |
| s3c2410_clk_sleep_init(); |
| |
| samsung_clk_of_add_provider(np, ctx); |
| } |
| |
| static void __init s3c2410_clk_init(struct device_node *np) |
| { |
| s3c2410_common_clk_init(np, 0, S3C2410, 0); |
| } |
| CLK_OF_DECLARE(s3c2410_clk, "samsung,s3c2410-clock", s3c2410_clk_init); |
| |
| static void __init s3c2440_clk_init(struct device_node *np) |
| { |
| s3c2410_common_clk_init(np, 0, S3C2440, 0); |
| } |
| CLK_OF_DECLARE(s3c2440_clk, "samsung,s3c2440-clock", s3c2440_clk_init); |
| |
| static void __init s3c2442_clk_init(struct device_node *np) |
| { |
| s3c2410_common_clk_init(np, 0, S3C2442, 0); |
| } |
| CLK_OF_DECLARE(s3c2442_clk, "samsung,s3c2442-clock", s3c2442_clk_init); |