blob: e43c876a92232d9fc0e8a18269c5c4fd7342a3ff [file] [log] [blame]
/*
*
* mwavedd.c -- mwave device driver
*
*
* Written By: Mike Sullivan IBM Corporation
*
* Copyright (C) 1999 IBM Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
*
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* 10/23/2000 - Alpha Release
* First release to the public
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/miscdevice.h>
#include <linux/device.h>
#include <linux/serial.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_8250.h>
#include <linux/nospec.h>
#include "smapi.h"
#include "mwavedd.h"
#include "3780i.h"
#include "tp3780i.h"
MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver");
MODULE_AUTHOR("Mike Sullivan and Paul Schroeder");
MODULE_LICENSE("GPL");
/*
* These parameters support the setting of MWave resources. Note that no
* checks are made against other devices (ie. superio) for conflicts.
* We'll depend on users using the tpctl utility to do that for now
*/
static DEFINE_MUTEX(mwave_mutex);
int mwave_debug = 0;
int mwave_3780i_irq = 0;
int mwave_3780i_io = 0;
int mwave_uart_irq = 0;
int mwave_uart_io = 0;
module_param(mwave_debug, int, 0);
module_param_hw(mwave_3780i_irq, int, irq, 0);
module_param_hw(mwave_3780i_io, int, ioport, 0);
module_param_hw(mwave_uart_irq, int, irq, 0);
module_param_hw(mwave_uart_io, int, ioport, 0);
static int mwave_open(struct inode *inode, struct file *file);
static int mwave_close(struct inode *inode, struct file *file);
static long mwave_ioctl(struct file *filp, unsigned int iocmd,
unsigned long ioarg);
MWAVE_DEVICE_DATA mwave_s_mdd;
static int mwave_open(struct inode *inode, struct file *file)
{
unsigned int retval = 0;
PRINTK_3(TRACE_MWAVE,
"mwavedd::mwave_open, entry inode %p file %p\n",
inode, file);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_open, exit return retval %x\n", retval);
return retval;
}
static int mwave_close(struct inode *inode, struct file *file)
{
unsigned int retval = 0;
PRINTK_3(TRACE_MWAVE,
"mwavedd::mwave_close, entry inode %p file %p\n",
inode, file);
PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_close, exit retval %x\n",
retval);
return retval;
}
static long mwave_ioctl(struct file *file, unsigned int iocmd,
unsigned long ioarg)
{
unsigned int retval = 0;
pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
void __user *arg = (void __user *)ioarg;
PRINTK_4(TRACE_MWAVE,
"mwavedd::mwave_ioctl, entry file %p cmd %x arg %x\n",
file, iocmd, (int) ioarg);
switch (iocmd) {
case IOCTL_MW_RESET:
PRINTK_1(TRACE_MWAVE,
"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
" calling tp3780I_ResetDSP\n");
mutex_lock(&mwave_mutex);
retval = tp3780I_ResetDSP(&pDrvData->rBDData);
mutex_unlock(&mwave_mutex);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl, IOCTL_MW_RESET"
" retval %x from tp3780I_ResetDSP\n",
retval);
break;
case IOCTL_MW_RUN:
PRINTK_1(TRACE_MWAVE,
"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
" calling tp3780I_StartDSP\n");
mutex_lock(&mwave_mutex);
retval = tp3780I_StartDSP(&pDrvData->rBDData);
mutex_unlock(&mwave_mutex);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl, IOCTL_MW_RUN"
" retval %x from tp3780I_StartDSP\n",
retval);
break;
case IOCTL_MW_DSP_ABILITIES: {
MW_ABILITIES rAbilities;
PRINTK_1(TRACE_MWAVE,
"mwavedd::mwave_ioctl,"
" IOCTL_MW_DSP_ABILITIES calling"
" tp3780I_QueryAbilities\n");
mutex_lock(&mwave_mutex);
retval = tp3780I_QueryAbilities(&pDrvData->rBDData,
&rAbilities);
mutex_unlock(&mwave_mutex);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
" retval %x from tp3780I_QueryAbilities\n",
retval);
if (retval == 0) {
if( copy_to_user(arg, &rAbilities,
sizeof(MW_ABILITIES)) )
return -EFAULT;
}
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl, IOCTL_MW_DSP_ABILITIES"
" exit retval %x\n",
retval);
}
break;
case IOCTL_MW_READ_DATA:
case IOCTL_MW_READCLEAR_DATA: {
MW_READWRITE rReadData;
unsigned short __user *pusBuffer = NULL;
if( copy_from_user(&rReadData, arg,
sizeof(MW_READWRITE)) )
return -EFAULT;
pusBuffer = (unsigned short __user *) (rReadData.pBuf);
PRINTK_4(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_READ_DATA,"
" size %lx, ioarg %lx pusBuffer %p\n",
rReadData.ulDataLength, ioarg, pusBuffer);
mutex_lock(&mwave_mutex);
retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
iocmd,
pusBuffer,
rReadData.ulDataLength,
rReadData.usDspAddress);
mutex_unlock(&mwave_mutex);
}
break;
case IOCTL_MW_READ_INST: {
MW_READWRITE rReadData;
unsigned short __user *pusBuffer = NULL;
if( copy_from_user(&rReadData, arg,
sizeof(MW_READWRITE)) )
return -EFAULT;
pusBuffer = (unsigned short __user *) (rReadData.pBuf);
PRINTK_4(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_READ_INST,"
" size %lx, ioarg %lx pusBuffer %p\n",
rReadData.ulDataLength / 2, ioarg,
pusBuffer);
mutex_lock(&mwave_mutex);
retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
iocmd, pusBuffer,
rReadData.ulDataLength / 2,
rReadData.usDspAddress);
mutex_unlock(&mwave_mutex);
}
break;
case IOCTL_MW_WRITE_DATA: {
MW_READWRITE rWriteData;
unsigned short __user *pusBuffer = NULL;
if( copy_from_user(&rWriteData, arg,
sizeof(MW_READWRITE)) )
return -EFAULT;
pusBuffer = (unsigned short __user *) (rWriteData.pBuf);
PRINTK_4(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_WRITE_DATA,"
" size %lx, ioarg %lx pusBuffer %p\n",
rWriteData.ulDataLength, ioarg,
pusBuffer);
mutex_lock(&mwave_mutex);
retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
iocmd, pusBuffer,
rWriteData.ulDataLength,
rWriteData.usDspAddress);
mutex_unlock(&mwave_mutex);
}
break;
case IOCTL_MW_WRITE_INST: {
MW_READWRITE rWriteData;
unsigned short __user *pusBuffer = NULL;
if( copy_from_user(&rWriteData, arg,
sizeof(MW_READWRITE)) )
return -EFAULT;
pusBuffer = (unsigned short __user *)(rWriteData.pBuf);
PRINTK_4(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_WRITE_INST,"
" size %lx, ioarg %lx pusBuffer %p\n",
rWriteData.ulDataLength, ioarg,
pusBuffer);
mutex_lock(&mwave_mutex);
retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData,
iocmd, pusBuffer,
rWriteData.ulDataLength,
rWriteData.usDspAddress);
mutex_unlock(&mwave_mutex);
}
break;
case IOCTL_MW_REGISTER_IPC: {
unsigned int ipcnum = (unsigned int) ioarg;
if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_ioctl:"
" IOCTL_MW_REGISTER_IPC:"
" Error: Invalid ipcnum %x\n",
ipcnum);
return -EINVAL;
}
ipcnum = array_index_nospec(ipcnum,
ARRAY_SIZE(pDrvData->IPCs));
PRINTK_3(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
" ipcnum %x entry usIntCount %x\n",
ipcnum,
pDrvData->IPCs[ipcnum].usIntCount);
mutex_lock(&mwave_mutex);
pDrvData->IPCs[ipcnum].bIsHere = false;
pDrvData->IPCs[ipcnum].bIsEnabled = true;
mutex_unlock(&mwave_mutex);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
" ipcnum %x exit\n",
ipcnum);
}
break;
case IOCTL_MW_GET_IPC: {
unsigned int ipcnum = (unsigned int) ioarg;
if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_ioctl:"
" IOCTL_MW_GET_IPC: Error:"
" Invalid ipcnum %x\n", ipcnum);
return -EINVAL;
}
ipcnum = array_index_nospec(ipcnum,
ARRAY_SIZE(pDrvData->IPCs));
PRINTK_3(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
" ipcnum %x, usIntCount %x\n",
ipcnum,
pDrvData->IPCs[ipcnum].usIntCount);
mutex_lock(&mwave_mutex);
if (pDrvData->IPCs[ipcnum].bIsEnabled == true) {
DECLARE_WAITQUEUE(wait, current);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl, thread for"
" ipc %x going to sleep\n",
ipcnum);
add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
pDrvData->IPCs[ipcnum].bIsHere = true;
set_current_state(TASK_INTERRUPTIBLE);
/* check whether an event was signalled by */
/* the interrupt handler while we were gone */
if (pDrvData->IPCs[ipcnum].usIntCount == 1) { /* first int has occurred (race condition) */
pDrvData->IPCs[ipcnum].usIntCount = 2; /* first int has been handled */
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl"
" IOCTL_MW_GET_IPC ipcnum %x"
" handling first int\n",
ipcnum);
} else { /* either 1st int has not yet occurred, or we have already handled the first int */
schedule();
if (pDrvData->IPCs[ipcnum].usIntCount == 1) {
pDrvData->IPCs[ipcnum].usIntCount = 2;
}
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl"
" IOCTL_MW_GET_IPC ipcnum %x"
" woke up and returning to"
" application\n",
ipcnum);
}
pDrvData->IPCs[ipcnum].bIsHere = false;
remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
set_current_state(TASK_RUNNING);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_GET_IPC,"
" returning thread for ipc %x"
" processing\n",
ipcnum);
}
mutex_unlock(&mwave_mutex);
}
break;
case IOCTL_MW_UNREGISTER_IPC: {
unsigned int ipcnum = (unsigned int) ioarg;
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_ioctl IOCTL_MW_UNREGISTER_IPC"
" ipcnum %x\n",
ipcnum);
if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_ioctl:"
" IOCTL_MW_UNREGISTER_IPC:"
" Error: Invalid ipcnum %x\n",
ipcnum);
return -EINVAL;
}
ipcnum = array_index_nospec(ipcnum,
ARRAY_SIZE(pDrvData->IPCs));
mutex_lock(&mwave_mutex);
if (pDrvData->IPCs[ipcnum].bIsEnabled == true) {
pDrvData->IPCs[ipcnum].bIsEnabled = false;
if (pDrvData->IPCs[ipcnum].bIsHere == true) {
wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue);
}
}
mutex_unlock(&mwave_mutex);
}
break;
default:
return -ENOTTY;
break;
} /* switch */
PRINTK_2(TRACE_MWAVE, "mwavedd::mwave_ioctl, exit retval %x\n", retval);
return retval;
}
static ssize_t mwave_read(struct file *file, char __user *buf, size_t count,
loff_t * ppos)
{
PRINTK_5(TRACE_MWAVE,
"mwavedd::mwave_read entry file %p, buf %p, count %zx ppos %p\n",
file, buf, count, ppos);
return -EINVAL;
}
static ssize_t mwave_write(struct file *file, const char __user *buf,
size_t count, loff_t * ppos)
{
PRINTK_5(TRACE_MWAVE,
"mwavedd::mwave_write entry file %p, buf %p,"
" count %zx ppos %p\n",
file, buf, count, ppos);
return -EINVAL;
}
static int register_serial_portandirq(unsigned int port, int irq)
{
struct uart_8250_port uart;
switch ( port ) {
case 0x3f8:
case 0x2f8:
case 0x3e8:
case 0x2e8:
/* OK */
break;
default:
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::register_serial_portandirq:"
" Error: Illegal port %x\n", port );
return -1;
} /* switch */
/* port is okay */
switch ( irq ) {
case 3:
case 4:
case 5:
case 7:
/* OK */
break;
default:
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::register_serial_portandirq:"
" Error: Illegal irq %x\n", irq );
return -1;
} /* switch */
/* irq is okay */
memset(&uart, 0, sizeof(uart));
uart.port.uartclk = 1843200;
uart.port.iobase = port;
uart.port.irq = irq;
uart.port.iotype = UPIO_PORT;
uart.port.flags = UPF_SHARE_IRQ;
return serial8250_register_8250_port(&uart);
}
static const struct file_operations mwave_fops = {
.owner = THIS_MODULE,
.read = mwave_read,
.write = mwave_write,
.unlocked_ioctl = mwave_ioctl,
.open = mwave_open,
.release = mwave_close,
.llseek = default_llseek,
};
static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops };
#if 0 /* totally b0rked */
/*
* sysfs support <paulsch@us.ibm.com>
*/
struct device mwave_device;
/* Prevent code redundancy, create a macro for mwave_show_* functions. */
#define mwave_show_function(attr_name, format_string, field) \
static ssize_t mwave_show_##attr_name(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
DSP_3780I_CONFIG_SETTINGS *pSettings = \
&mwave_s_mdd.rBDData.rDspSettings; \
return sprintf(buf, format_string, pSettings->field); \
}
/* All of our attributes are read attributes. */
#define mwave_dev_rd_attr(attr_name, format_string, field) \
mwave_show_function(attr_name, format_string, field) \
static DEVICE_ATTR(attr_name, S_IRUGO, mwave_show_##attr_name, NULL)
mwave_dev_rd_attr (3780i_dma, "%i\n", usDspDma);
mwave_dev_rd_attr (3780i_irq, "%i\n", usDspIrq);
mwave_dev_rd_attr (3780i_io, "%#.4x\n", usDspBaseIO);
mwave_dev_rd_attr (uart_irq, "%i\n", usUartIrq);
mwave_dev_rd_attr (uart_io, "%#.4x\n", usUartBaseIO);
static struct device_attribute * const mwave_dev_attrs[] = {
&dev_attr_3780i_dma,
&dev_attr_3780i_irq,
&dev_attr_3780i_io,
&dev_attr_uart_irq,
&dev_attr_uart_io,
};
#endif
/*
* mwave_init is called on module load
*
* mwave_exit is called on module unload
* mwave_exit is also used to clean up after an aborted mwave_init
*/
static void mwave_exit(void)
{
pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit entry\n");
#if 0
for (i = 0; i < pDrvData->nr_registered_attrs; i++)
device_remove_file(&mwave_device, mwave_dev_attrs[i]);
pDrvData->nr_registered_attrs = 0;
if (pDrvData->device_registered) {
device_unregister(&mwave_device);
pDrvData->device_registered = false;
}
#endif
if ( pDrvData->sLine >= 0 ) {
serial8250_unregister_port(pDrvData->sLine);
}
if (pDrvData->bMwaveDevRegistered) {
misc_deregister(&mwave_misc_dev);
}
if (pDrvData->bDSPEnabled) {
tp3780I_DisableDSP(&pDrvData->rBDData);
}
if (pDrvData->bResourcesClaimed) {
tp3780I_ReleaseResources(&pDrvData->rBDData);
}
if (pDrvData->bBDInitialized) {
tp3780I_Cleanup(&pDrvData->rBDData);
}
PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_exit exit\n");
}
module_exit(mwave_exit);
static int __init mwave_init(void)
{
int i;
int retval = 0;
pMWAVE_DEVICE_DATA pDrvData = &mwave_s_mdd;
PRINTK_1(TRACE_MWAVE, "mwavedd::mwave_init entry\n");
memset(&mwave_s_mdd, 0, sizeof(MWAVE_DEVICE_DATA));
pDrvData->bBDInitialized = false;
pDrvData->bResourcesClaimed = false;
pDrvData->bDSPEnabled = false;
pDrvData->bDSPReset = false;
pDrvData->bMwaveDevRegistered = false;
pDrvData->sLine = -1;
for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) {
pDrvData->IPCs[i].bIsEnabled = false;
pDrvData->IPCs[i].bIsHere = false;
pDrvData->IPCs[i].usIntCount = 0; /* no ints received yet */
init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue);
}
retval = tp3780I_InitializeBoardData(&pDrvData->rBDData);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_init, return from tp3780I_InitializeBoardData"
" retval %x\n",
retval);
if (retval) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_init: Error:"
" Failed to initialize board data\n");
goto cleanup_error;
}
pDrvData->bBDInitialized = true;
retval = tp3780I_CalcResources(&pDrvData->rBDData);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_init, return from tp3780I_CalcResources"
" retval %x\n",
retval);
if (retval) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd:mwave_init: Error:"
" Failed to calculate resources\n");
goto cleanup_error;
}
retval = tp3780I_ClaimResources(&pDrvData->rBDData);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_init, return from tp3780I_ClaimResources"
" retval %x\n",
retval);
if (retval) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd:mwave_init: Error:"
" Failed to claim resources\n");
goto cleanup_error;
}
pDrvData->bResourcesClaimed = true;
retval = tp3780I_EnableDSP(&pDrvData->rBDData);
PRINTK_2(TRACE_MWAVE,
"mwavedd::mwave_init, return from tp3780I_EnableDSP"
" retval %x\n",
retval);
if (retval) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd:mwave_init: Error:"
" Failed to enable DSP\n");
goto cleanup_error;
}
pDrvData->bDSPEnabled = true;
if (misc_register(&mwave_misc_dev) < 0) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd:mwave_init: Error:"
" Failed to register misc device\n");
goto cleanup_error;
}
pDrvData->bMwaveDevRegistered = true;
pDrvData->sLine = register_serial_portandirq(
pDrvData->rBDData.rDspSettings.usUartBaseIO,
pDrvData->rBDData.rDspSettings.usUartIrq
);
if (pDrvData->sLine < 0) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd:mwave_init: Error:"
" Failed to register serial driver\n");
goto cleanup_error;
}
/* uart is registered */
#if 0
/* sysfs */
memset(&mwave_device, 0, sizeof (struct device));
dev_set_name(&mwave_device, "mwave");
if (device_register(&mwave_device))
goto cleanup_error;
pDrvData->device_registered = true;
for (i = 0; i < ARRAY_SIZE(mwave_dev_attrs); i++) {
if(device_create_file(&mwave_device, mwave_dev_attrs[i])) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd:mwave_init: Error:"
" Failed to create sysfs file %s\n",
mwave_dev_attrs[i]->attr.name);
goto cleanup_error;
}
pDrvData->nr_registered_attrs++;
}
#endif
/* SUCCESS! */
return 0;
cleanup_error:
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_init: Error:"
" Failed to initialize\n");
mwave_exit(); /* clean up */
return -EIO;
}
module_init(mwave_init);