| /* |
| * Bluetooth support for Realtek devices |
| * |
| * Copyright (C) 2015 Endless Mobile, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <asm/unaligned.h> |
| #include <linux/usb.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "btrtl.h" |
| |
| #define VERSION "0.1" |
| |
| #define RTL_EPATCH_SIGNATURE "Realtech" |
| #define RTL_ROM_LMP_3499 0x3499 |
| #define RTL_ROM_LMP_8723A 0x1200 |
| #define RTL_ROM_LMP_8723B 0x8723 |
| #define RTL_ROM_LMP_8821A 0x8821 |
| #define RTL_ROM_LMP_8761A 0x8761 |
| #define RTL_ROM_LMP_8822B 0x8822 |
| |
| static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version) |
| { |
| struct rtl_rom_version_evt *rom_version; |
| struct sk_buff *skb; |
| |
| /* Read RTL ROM version command */ |
| skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| BT_ERR("%s: Read ROM version failed (%ld)", |
| hdev->name, PTR_ERR(skb)); |
| return PTR_ERR(skb); |
| } |
| |
| if (skb->len != sizeof(*rom_version)) { |
| BT_ERR("%s: RTL version event length mismatch", hdev->name); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| |
| rom_version = (struct rtl_rom_version_evt *)skb->data; |
| BT_INFO("%s: rom_version status=%x version=%x", |
| hdev->name, rom_version->status, rom_version->version); |
| |
| *version = rom_version->version; |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| static int rtl8723b_parse_firmware(struct hci_dev *hdev, u16 lmp_subver, |
| const struct firmware *fw, |
| unsigned char **_buf) |
| { |
| const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 }; |
| struct rtl_epatch_header *epatch_info; |
| unsigned char *buf; |
| int i, ret, len; |
| size_t min_size; |
| u8 opcode, length, data, rom_version = 0; |
| int project_id = -1; |
| const unsigned char *fwptr, *chip_id_base; |
| const unsigned char *patch_length_base, *patch_offset_base; |
| u32 patch_offset = 0; |
| u16 patch_length, num_patches; |
| static const struct { |
| __u16 lmp_subver; |
| __u8 id; |
| } project_id_to_lmp_subver[] = { |
| { RTL_ROM_LMP_8723A, 0 }, |
| { RTL_ROM_LMP_8723B, 1 }, |
| { RTL_ROM_LMP_8821A, 2 }, |
| { RTL_ROM_LMP_8761A, 3 }, |
| { RTL_ROM_LMP_8822B, 8 }, |
| }; |
| |
| ret = rtl_read_rom_version(hdev, &rom_version); |
| if (ret) |
| return ret; |
| |
| min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; |
| if (fw->size < min_size) |
| return -EINVAL; |
| |
| fwptr = fw->data + fw->size - sizeof(extension_sig); |
| if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) { |
| BT_ERR("%s: extension section signature mismatch", hdev->name); |
| return -EINVAL; |
| } |
| |
| /* Loop from the end of the firmware parsing instructions, until |
| * we find an instruction that identifies the "project ID" for the |
| * hardware supported by this firwmare file. |
| * Once we have that, we double-check that that project_id is suitable |
| * for the hardware we are working with. |
| */ |
| while (fwptr >= fw->data + (sizeof(struct rtl_epatch_header) + 3)) { |
| opcode = *--fwptr; |
| length = *--fwptr; |
| data = *--fwptr; |
| |
| BT_DBG("check op=%x len=%x data=%x", opcode, length, data); |
| |
| if (opcode == 0xff) /* EOF */ |
| break; |
| |
| if (length == 0) { |
| BT_ERR("%s: found instruction with length 0", |
| hdev->name); |
| return -EINVAL; |
| } |
| |
| if (opcode == 0 && length == 1) { |
| project_id = data; |
| break; |
| } |
| |
| fwptr -= length; |
| } |
| |
| if (project_id < 0) { |
| BT_ERR("%s: failed to find version instruction", hdev->name); |
| return -EINVAL; |
| } |
| |
| /* Find project_id in table */ |
| for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) { |
| if (project_id == project_id_to_lmp_subver[i].id) |
| break; |
| } |
| |
| if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) { |
| BT_ERR("%s: unknown project id %d", hdev->name, project_id); |
| return -EINVAL; |
| } |
| |
| if (lmp_subver != project_id_to_lmp_subver[i].lmp_subver) { |
| BT_ERR("%s: firmware is for %x but this is a %x", hdev->name, |
| project_id_to_lmp_subver[i].lmp_subver, lmp_subver); |
| return -EINVAL; |
| } |
| |
| epatch_info = (struct rtl_epatch_header *)fw->data; |
| if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) { |
| BT_ERR("%s: bad EPATCH signature", hdev->name); |
| return -EINVAL; |
| } |
| |
| num_patches = le16_to_cpu(epatch_info->num_patches); |
| BT_DBG("fw_version=%x, num_patches=%d", |
| le32_to_cpu(epatch_info->fw_version), num_patches); |
| |
| /* After the rtl_epatch_header there is a funky patch metadata section. |
| * Assuming 2 patches, the layout is: |
| * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2 |
| * |
| * Find the right patch for this chip. |
| */ |
| min_size += 8 * num_patches; |
| if (fw->size < min_size) |
| return -EINVAL; |
| |
| chip_id_base = fw->data + sizeof(struct rtl_epatch_header); |
| patch_length_base = chip_id_base + (sizeof(u16) * num_patches); |
| patch_offset_base = patch_length_base + (sizeof(u16) * num_patches); |
| for (i = 0; i < num_patches; i++) { |
| u16 chip_id = get_unaligned_le16(chip_id_base + |
| (i * sizeof(u16))); |
| if (chip_id == rom_version + 1) { |
| patch_length = get_unaligned_le16(patch_length_base + |
| (i * sizeof(u16))); |
| patch_offset = get_unaligned_le32(patch_offset_base + |
| (i * sizeof(u32))); |
| break; |
| } |
| } |
| |
| if (!patch_offset) { |
| BT_ERR("%s: didn't find patch for chip id %d", |
| hdev->name, rom_version); |
| return -EINVAL; |
| } |
| |
| BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i); |
| min_size = patch_offset + patch_length; |
| if (fw->size < min_size) |
| return -EINVAL; |
| |
| /* Copy the firmware into a new buffer and write the version at |
| * the end. |
| */ |
| len = patch_length; |
| buf = kmemdup(fw->data + patch_offset, patch_length, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4); |
| |
| *_buf = buf; |
| return len; |
| } |
| |
| static int rtl_download_firmware(struct hci_dev *hdev, |
| const unsigned char *data, int fw_len) |
| { |
| struct rtl_download_cmd *dl_cmd; |
| int frag_num = fw_len / RTL_FRAG_LEN + 1; |
| int frag_len = RTL_FRAG_LEN; |
| int ret = 0; |
| int i; |
| |
| dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL); |
| if (!dl_cmd) |
| return -ENOMEM; |
| |
| for (i = 0; i < frag_num; i++) { |
| struct sk_buff *skb; |
| |
| BT_DBG("download fw (%d/%d)", i, frag_num); |
| |
| dl_cmd->index = i; |
| if (i == (frag_num - 1)) { |
| dl_cmd->index |= 0x80; /* data end */ |
| frag_len = fw_len % RTL_FRAG_LEN; |
| } |
| memcpy(dl_cmd->data, data, frag_len); |
| |
| /* Send download command */ |
| skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| BT_ERR("%s: download fw command failed (%ld)", |
| hdev->name, PTR_ERR(skb)); |
| ret = -PTR_ERR(skb); |
| goto out; |
| } |
| |
| if (skb->len != sizeof(struct rtl_download_response)) { |
| BT_ERR("%s: download fw event length mismatch", |
| hdev->name); |
| kfree_skb(skb); |
| ret = -EIO; |
| goto out; |
| } |
| |
| kfree_skb(skb); |
| data += RTL_FRAG_LEN; |
| } |
| |
| out: |
| kfree(dl_cmd); |
| return ret; |
| } |
| |
| static int rtl_load_config(struct hci_dev *hdev, const char *name, u8 **buff) |
| { |
| const struct firmware *fw; |
| int ret; |
| |
| BT_INFO("%s: rtl: loading %s", hdev->name, name); |
| ret = request_firmware(&fw, name, &hdev->dev); |
| if (ret < 0) |
| return ret; |
| ret = fw->size; |
| *buff = kmemdup(fw->data, ret, GFP_KERNEL); |
| if (!*buff) |
| ret = -ENOMEM; |
| |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| static int btrtl_setup_rtl8723a(struct hci_dev *hdev) |
| { |
| const struct firmware *fw; |
| int ret; |
| |
| BT_INFO("%s: rtl: loading rtl_bt/rtl8723a_fw.bin", hdev->name); |
| ret = request_firmware(&fw, "rtl_bt/rtl8723a_fw.bin", &hdev->dev); |
| if (ret < 0) { |
| BT_ERR("%s: Failed to load rtl_bt/rtl8723a_fw.bin", hdev->name); |
| return ret; |
| } |
| |
| if (fw->size < 8) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Check that the firmware doesn't have the epatch signature |
| * (which is only for RTL8723B and newer). |
| */ |
| if (!memcmp(fw->data, RTL_EPATCH_SIGNATURE, 8)) { |
| BT_ERR("%s: unexpected EPATCH signature!", hdev->name); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = rtl_download_firmware(hdev, fw->data, fw->size); |
| |
| out: |
| release_firmware(fw); |
| return ret; |
| } |
| |
| static int btrtl_setup_rtl8723b(struct hci_dev *hdev, u16 lmp_subver, |
| const char *fw_name) |
| { |
| unsigned char *fw_data = NULL; |
| const struct firmware *fw; |
| int ret; |
| int cfg_sz; |
| u8 *cfg_buff = NULL; |
| u8 *tbuff; |
| char *cfg_name = NULL; |
| bool config_needed = false; |
| |
| switch (lmp_subver) { |
| case RTL_ROM_LMP_8723B: |
| cfg_name = "rtl_bt/rtl8723b_config.bin"; |
| break; |
| case RTL_ROM_LMP_8821A: |
| cfg_name = "rtl_bt/rtl8821a_config.bin"; |
| break; |
| case RTL_ROM_LMP_8761A: |
| cfg_name = "rtl_bt/rtl8761a_config.bin"; |
| break; |
| case RTL_ROM_LMP_8822B: |
| cfg_name = "rtl_bt/rtl8822b_config.bin"; |
| config_needed = true; |
| break; |
| default: |
| BT_ERR("%s: rtl: no config according to lmp_subver %04x", |
| hdev->name, lmp_subver); |
| break; |
| } |
| |
| if (cfg_name) { |
| cfg_sz = rtl_load_config(hdev, cfg_name, &cfg_buff); |
| if (cfg_sz < 0) { |
| cfg_sz = 0; |
| if (config_needed) |
| BT_ERR("Necessary config file %s not found\n", |
| cfg_name); |
| } |
| } else |
| cfg_sz = 0; |
| |
| BT_INFO("%s: rtl: loading %s", hdev->name, fw_name); |
| ret = request_firmware(&fw, fw_name, &hdev->dev); |
| if (ret < 0) { |
| BT_ERR("%s: Failed to load %s", hdev->name, fw_name); |
| goto err_req_fw; |
| } |
| |
| ret = rtl8723b_parse_firmware(hdev, lmp_subver, fw, &fw_data); |
| if (ret < 0) |
| goto out; |
| |
| if (cfg_sz) { |
| tbuff = kzalloc(ret + cfg_sz, GFP_KERNEL); |
| if (!tbuff) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memcpy(tbuff, fw_data, ret); |
| kfree(fw_data); |
| |
| memcpy(tbuff + ret, cfg_buff, cfg_sz); |
| ret += cfg_sz; |
| |
| fw_data = tbuff; |
| } |
| |
| BT_INFO("cfg_sz %d, total size %d", cfg_sz, ret); |
| |
| ret = rtl_download_firmware(hdev, fw_data, ret); |
| |
| out: |
| release_firmware(fw); |
| kfree(fw_data); |
| err_req_fw: |
| if (cfg_sz) |
| kfree(cfg_buff); |
| return ret; |
| } |
| |
| static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)", |
| hdev->name, PTR_ERR(skb)); |
| return skb; |
| } |
| |
| if (skb->len != sizeof(struct hci_rp_read_local_version)) { |
| BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch", |
| hdev->name); |
| kfree_skb(skb); |
| return ERR_PTR(-EIO); |
| } |
| |
| return skb; |
| } |
| |
| int btrtl_setup_realtek(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| struct hci_rp_read_local_version *resp; |
| u16 lmp_subver; |
| |
| skb = btrtl_read_local_version(hdev); |
| if (IS_ERR(skb)) |
| return -PTR_ERR(skb); |
| |
| resp = (struct hci_rp_read_local_version *)skb->data; |
| BT_INFO("%s: rtl: examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x " |
| "lmp_subver=%04x", hdev->name, resp->hci_ver, resp->hci_rev, |
| resp->lmp_ver, resp->lmp_subver); |
| |
| lmp_subver = le16_to_cpu(resp->lmp_subver); |
| kfree_skb(skb); |
| |
| /* Match a set of subver values that correspond to stock firmware, |
| * which is not compatible with standard btusb. |
| * If matched, upload an alternative firmware that does conform to |
| * standard btusb. Once that firmware is uploaded, the subver changes |
| * to a different value. |
| */ |
| switch (lmp_subver) { |
| case RTL_ROM_LMP_8723A: |
| case RTL_ROM_LMP_3499: |
| return btrtl_setup_rtl8723a(hdev); |
| case RTL_ROM_LMP_8723B: |
| return btrtl_setup_rtl8723b(hdev, lmp_subver, |
| "rtl_bt/rtl8723b_fw.bin"); |
| case RTL_ROM_LMP_8821A: |
| return btrtl_setup_rtl8723b(hdev, lmp_subver, |
| "rtl_bt/rtl8821a_fw.bin"); |
| case RTL_ROM_LMP_8761A: |
| return btrtl_setup_rtl8723b(hdev, lmp_subver, |
| "rtl_bt/rtl8761a_fw.bin"); |
| case RTL_ROM_LMP_8822B: |
| return btrtl_setup_rtl8723b(hdev, lmp_subver, |
| "rtl_bt/rtl8822b_fw.bin"); |
| default: |
| BT_INFO("rtl: assuming no firmware upload needed."); |
| return 0; |
| } |
| } |
| EXPORT_SYMBOL_GPL(btrtl_setup_realtek); |
| |
| MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>"); |
| MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |