| config BATTERY_SAMSUNG_DATA_FILE |
| depends on BATTERY_SAMSUNG |
| string "samsung battery data file" |
| default "default_battery_data.h" |
| help |
| Path to the battery data file. |
| |
| config SLOW_CHARGING_CURRENT_STANDARD |
| int "slow charging" |
| depends on BATTERY_SAMSUNG |
| default "1000" |
| help |
| Value for standard of slow-charging. |
| |
| config CHARGING_VZWCONCEPT |
| tristate "VZW concept about the charging" |
| default n |
| depends on BATTERY_SAMSUNG |
| help |
| Say Y to include support for the VZW concepts. |
| |
| config CALC_TIME_TO_FULL |
| tristate "calculate time to full" |
| default n |
| depends on BATTERY_SAMSUNG |
| help |
| Say Y to use calc time to full function. |
| |
| config MULTI_CHARGING |
| bool "support for multi charger ICs" |
| help |
| Say Y to include support for multi charger ICs |
| |
| config STEP_CHARGING |
| bool "support for step charging" |
| help |
| Say Y to include support for step charging |
| |
| config ENABLE_FULL_BY_SOC |
| bool "make full by soc 100%" |
| help |
| default n |
| Say Y to include support to make full by soc 100% |
| |
| config DIRECT_CHARGING |
| bool "support for direct charging" |
| help |
| Say Y to include support for direct charging |
| |
| config UPDATE_BATTERY_DATA |
| bool "support for updating battery data" |
| default n |
| depends on BATTERY_SAMSUNG && OF |
| help |
| Say Y to include support for step charging |
| |
| config AFC_CURR_CONTROL_BY_TEMP |
| tristate "fast charging current control by temp" |
| default n |
| depends on BATTERY_SAMSUNG |
| help |
| Say Y to set afc current control by temp |
| |
| config BATTERY_CISD |
| bool "support for cisd" |
| help |
| Say Y to include support for cisd |
| cisd means cell internal short detection |
| |
| config PREVENT_SOC_JUMP |
| tristate "prevent soc jump at full-charged" |
| default n |
| depends on BATTERY_SAMSUNG |
| help |
| Say Y to prevent soc jump |
| |
| config CS100_JPNCONCEPT |
| tristate "cs100 command support" |
| depends on BATTERY_SAMSUNG && I2C |
| help |
| Say Y here to support for CS100 command to stop when full-charged |
| on wireless charging for JPN models |
| |
| config AFC_CHARGER_MODE |
| bool "afc charging support in sec battery driver" |
| default n |
| help |
| Say Y to include support for sec afc charging support |
| |
| config SAMSUNG_LPM_MODE |
| bool "Off charging mode support in sec battery driver" |
| default n |
| help |
| Say Y to include support for sec off charging support |
| This value defined at bootloader. |
| Before enable this feature, |
| implemet power off charging in the bootloader. |
| |
| config SAMSUNG_BATTERY_ENG_TEST |
| bool "enable ENG mode for battery test" |
| default n |
| help |
| Say Y to include support for battery test |
| enable this feature only ENG mode |
| this featuren must disabled user binary |
| stability test etc.. |
| |
| config SAMSUNG_BATTERY_FACTORY |
| bool "enable for factory test" |
| default n |
| help |
| Say Y to include support for factory test |
| enable this feature only factory mode |
| this featuren must disabled user binary |
| stability test etc.. |
| |
| config SAMSUNG_BATTERY_DISALLOW_DEEP_SLEEP |
| bool "Disallow deep sleep during charging" |
| default n |
| depends on BATTERY_SAMSUNG && (ARCH_MSM8974 || ARCH_APQ8084) |
| help |
| Say Y to include support |
| Disallow deep sleep during charging for stablity. |
| |
| config DISABLE_SAVE_CAPACITY_MAX |
| bool "Disable to save capacity max in efs" |
| default n |
| depends on BATTERY_SAMSUNG |
| help |
| Say Y to include support to disable it |
| capacity_max is saved in /efs/Battery/batt_capacity_max |
| capacity_max is restored after boot up |
| You can find the code in healthd |
| |
| config SIOP_CHARGING_LIMIT_CURRENT |
| int "Siop charging limit current" |
| default 0 |
| help |
| set SIOP charging limit current. |
| |
| config EN_OOPS |
| bool "enable oops filter" |
| default n |
| help |
| Say Y to enable oops filter |
| |
| config USE_POGO |
| bool "enable pogo charging" |
| default n |
| help |
| Say Y to enable CONFIG_USE_POGO |
| |
| config MACH_KOR_EARJACK_WR |
| bool "enable earjack-noise workaround" |
| default n |
| depends on BATTERY_SAMSUNG |
| help |
| Say Y to enable earjack-noise workaround at charging |
| |
| config STORE_MODE |
| bool "enable store mode" |
| default n |
| help |
| Say Y to enable CONFIG_STORE_MODE |
| |
| config SW_SELF_DISCHARGING |
| bool "enable sw_self_discharging" |
| default n |
| help |
| Say Y to enable CONFIG_SW_SELF_DISCHARGING |
| |
| config BATTERY_AGE_FORECAST |
| tristate "battery age forecast" |
| default n |
| help |
| Say Y to use calc time to full function. |
| |
| config ENG_BATTERY_CONCEPT |
| bool "enable temp block" |
| default n |
| help |
| Say Y to enable CONFIG_ENG_BATTERY_CONCEPT |
| |
| config QH_ALGORITHM |
| bool "enable QH algorithm" |
| default n |
| help |
| Say Y to enable CONFIG_QH_ALGORITHM to measure leakges of the battery |
| using raw coulomb count generated by the device |
| |
| config BATTERY_NOTIFIER |
| bool "battery notifier" |
| default n |
| help |
| Say Y to enable battery notifier |
| |
| config LIMIT_CHARGING_DURING_CALL |
| bool "limit charging during call" |
| default n |
| help |
| Say Y to limit charging during call |
| |
| config ENABLE_100MA_CHARGING_BEFORE_USB_CONFIGURED |
| bool "enable 100mA before usb configured" |
| default n |
| help |
| Say Y to enable 100mA before usb configured |
| |
| config TABLET_MODEL_CONCEPT |
| bool "tablet model concept" |
| default n |
| help |
| Say Y to enable tablet model concept |
| |
| config OTG_OVERCURRENT_BY_CHGIN |
| bool "enable otg overcurrent detection by chgin workaround" |
| default n |
| help |
| Say Y to enable otg overcurrent detection by chgin workaround |
| for charger ICs have otg retrying issues from OVP IC specification |
| |
| config SWITCHING_S2ASL01 |
| tristate "S2ASL01 SWITCHING IC support" |
| depends on I2C |
| help |
| Say Y here to enable support for S2ASL01 switching driver. |
| |
| config DUAL_BATTERY |
| tristate "DUAL BATTERY support" |
| depends on I2C |
| help |
| Say Y here to enable support for dual battery |
| |
| config ISDB_CHARGING_CONTROL |
| tristate "ISDB CHARGING CONTROL support" |
| depends on I2C |
| help |
| Say Y here to enable support for isdb |
| |
| config PREVENT_USB_CONN_OVERHEAT |
| bool "enable prevent usb conn overheat" |
| default n |
| help |
| Say Y to enable CONFIG_PREVENT_USB_CONN_OVERHEAT |