| /* |
| * Derived from arch/i386/kernel/irq.c |
| * Copyright (C) 1992 Linus Torvalds |
| * Adapted from arch/i386 by Gary Thomas |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * Updated and modified by Cort Dougan <cort@fsmlabs.com> |
| * Copyright (C) 1996-2001 Cort Dougan |
| * Adapted for Power Macintosh by Paul Mackerras |
| * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * This file contains the code used by various IRQ handling routines: |
| * asking for different IRQ's should be done through these routines |
| * instead of just grabbing them. Thus setups with different IRQ numbers |
| * shouldn't result in any weird surprises, and installing new handlers |
| * should be easier. |
| * |
| * The MPC8xx has an interrupt mask in the SIU. If a bit is set, the |
| * interrupt is _enabled_. As expected, IRQ0 is bit 0 in the 32-bit |
| * mask register (of which only 16 are defined), hence the weird shifting |
| * and complement of the cached_irq_mask. I want to be able to stuff |
| * this right into the SIU SMASK register. |
| * Many of the prep/chrp functions are conditional compiled on CONFIG_PPC_8xx |
| * to reduce code space and undefined function references. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/export.h> |
| #include <linux/threads.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/ptrace.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/timex.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/seq_file.h> |
| #include <linux/cpumask.h> |
| #include <linux/profile.h> |
| #include <linux/bitops.h> |
| #include <linux/list.h> |
| #include <linux/radix-tree.h> |
| #include <linux/mutex.h> |
| #include <linux/pci.h> |
| #include <linux/debugfs.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| |
| #include <linux/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/irq.h> |
| #include <asm/cache.h> |
| #include <asm/prom.h> |
| #include <asm/ptrace.h> |
| #include <asm/machdep.h> |
| #include <asm/udbg.h> |
| #include <asm/smp.h> |
| #include <asm/livepatch.h> |
| #include <asm/asm-prototypes.h> |
| |
| #ifdef CONFIG_PPC64 |
| #include <asm/paca.h> |
| #include <asm/firmware.h> |
| #include <asm/lv1call.h> |
| #endif |
| #define CREATE_TRACE_POINTS |
| #include <asm/trace.h> |
| #include <asm/cpu_has_feature.h> |
| |
| DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); |
| EXPORT_PER_CPU_SYMBOL(irq_stat); |
| |
| int __irq_offset_value; |
| |
| #ifdef CONFIG_PPC32 |
| EXPORT_SYMBOL(__irq_offset_value); |
| atomic_t ppc_n_lost_interrupts; |
| |
| #ifdef CONFIG_TAU_INT |
| extern int tau_initialized; |
| extern int tau_interrupts(int); |
| #endif |
| #endif /* CONFIG_PPC32 */ |
| |
| #ifdef CONFIG_PPC64 |
| |
| int distribute_irqs = 1; |
| |
| static inline notrace unsigned long get_irq_happened(void) |
| { |
| unsigned long happened; |
| |
| __asm__ __volatile__("lbz %0,%1(13)" |
| : "=r" (happened) : "i" (offsetof(struct paca_struct, irq_happened))); |
| |
| return happened; |
| } |
| |
| static inline notrace void set_soft_enabled(unsigned long enable) |
| { |
| __asm__ __volatile__("stb %0,%1(13)" |
| : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); |
| } |
| |
| static inline notrace int decrementer_check_overflow(void) |
| { |
| u64 now = get_tb_or_rtc(); |
| u64 *next_tb = this_cpu_ptr(&decrementers_next_tb); |
| |
| return now >= *next_tb; |
| } |
| |
| /* This is called whenever we are re-enabling interrupts |
| * and returns either 0 (nothing to do) or 500/900/280/a00/e80 if |
| * there's an EE, DEC or DBELL to generate. |
| * |
| * This is called in two contexts: From arch_local_irq_restore() |
| * before soft-enabling interrupts, and from the exception exit |
| * path when returning from an interrupt from a soft-disabled to |
| * a soft enabled context. In both case we have interrupts hard |
| * disabled. |
| * |
| * We take care of only clearing the bits we handled in the |
| * PACA irq_happened field since we can only re-emit one at a |
| * time and we don't want to "lose" one. |
| */ |
| notrace unsigned int __check_irq_replay(void) |
| { |
| /* |
| * We use local_paca rather than get_paca() to avoid all |
| * the debug_smp_processor_id() business in this low level |
| * function |
| */ |
| unsigned char happened = local_paca->irq_happened; |
| |
| if (happened & PACA_IRQ_HARD_DIS) { |
| /* Clear bit 0 which we wouldn't clear otherwise */ |
| local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; |
| |
| /* |
| * We may have missed a decrementer interrupt if hard disabled. |
| * Check the decrementer register in case we had a rollover |
| * while hard disabled. |
| */ |
| if (!(happened & PACA_IRQ_DEC)) { |
| if (decrementer_check_overflow()) { |
| local_paca->irq_happened |= PACA_IRQ_DEC; |
| happened |= PACA_IRQ_DEC; |
| } |
| } |
| } |
| |
| /* |
| * Force the delivery of pending soft-disabled interrupts on PS3. |
| * Any HV call will have this side effect. |
| */ |
| if (firmware_has_feature(FW_FEATURE_PS3_LV1)) { |
| u64 tmp, tmp2; |
| lv1_get_version_info(&tmp, &tmp2); |
| } |
| |
| /* |
| * Check if an hypervisor Maintenance interrupt happened. |
| * This is a higher priority interrupt than the others, so |
| * replay it first. |
| */ |
| if (happened & PACA_IRQ_HMI) { |
| local_paca->irq_happened &= ~PACA_IRQ_HMI; |
| return 0xe60; |
| } |
| |
| if (happened & PACA_IRQ_DEC) { |
| local_paca->irq_happened &= ~PACA_IRQ_DEC; |
| return 0x900; |
| } |
| |
| if (happened & PACA_IRQ_EE) { |
| local_paca->irq_happened &= ~PACA_IRQ_EE; |
| return 0x500; |
| } |
| |
| #ifdef CONFIG_PPC_BOOK3E |
| /* |
| * Check if an EPR external interrupt happened this bit is typically |
| * set if we need to handle another "edge" interrupt from within the |
| * MPIC "EPR" handler. |
| */ |
| if (happened & PACA_IRQ_EE_EDGE) { |
| local_paca->irq_happened &= ~PACA_IRQ_EE_EDGE; |
| return 0x500; |
| } |
| |
| if (happened & PACA_IRQ_DBELL) { |
| local_paca->irq_happened &= ~PACA_IRQ_DBELL; |
| return 0x280; |
| } |
| #else |
| if (happened & PACA_IRQ_DBELL) { |
| local_paca->irq_happened &= ~PACA_IRQ_DBELL; |
| return 0xa00; |
| } |
| #endif /* CONFIG_PPC_BOOK3E */ |
| |
| /* There should be nothing left ! */ |
| BUG_ON(local_paca->irq_happened != 0); |
| |
| return 0; |
| } |
| |
| notrace void arch_local_irq_restore(unsigned long en) |
| { |
| unsigned char irq_happened; |
| unsigned int replay; |
| |
| /* Write the new soft-enabled value */ |
| set_soft_enabled(en); |
| if (!en) |
| return; |
| /* |
| * From this point onward, we can take interrupts, preempt, |
| * etc... unless we got hard-disabled. We check if an event |
| * happened. If none happened, we know we can just return. |
| * |
| * We may have preempted before the check below, in which case |
| * we are checking the "new" CPU instead of the old one. This |
| * is only a problem if an event happened on the "old" CPU. |
| * |
| * External interrupt events will have caused interrupts to |
| * be hard-disabled, so there is no problem, we |
| * cannot have preempted. |
| */ |
| irq_happened = get_irq_happened(); |
| if (!irq_happened) |
| return; |
| |
| /* |
| * We need to hard disable to get a trusted value from |
| * __check_irq_replay(). We also need to soft-disable |
| * again to avoid warnings in there due to the use of |
| * per-cpu variables. |
| * |
| * We know that if the value in irq_happened is exactly 0x01 |
| * then we are already hard disabled (there are other less |
| * common cases that we'll ignore for now), so we skip the |
| * (expensive) mtmsrd. |
| */ |
| if (unlikely(irq_happened != PACA_IRQ_HARD_DIS)) |
| __hard_irq_disable(); |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| else { |
| /* |
| * We should already be hard disabled here. We had bugs |
| * where that wasn't the case so let's dbl check it and |
| * warn if we are wrong. Only do that when IRQ tracing |
| * is enabled as mfmsr() can be costly. |
| */ |
| if (WARN_ON(mfmsr() & MSR_EE)) |
| __hard_irq_disable(); |
| } |
| #endif /* CONFIG_TRACE_IRQFLAGS */ |
| |
| set_soft_enabled(0); |
| |
| /* |
| * Check if anything needs to be re-emitted. We haven't |
| * soft-enabled yet to avoid warnings in decrementer_check_overflow |
| * accessing per-cpu variables |
| */ |
| replay = __check_irq_replay(); |
| |
| /* We can soft-enable now */ |
| set_soft_enabled(1); |
| |
| /* |
| * And replay if we have to. This will return with interrupts |
| * hard-enabled. |
| */ |
| if (replay) { |
| __replay_interrupt(replay); |
| return; |
| } |
| |
| /* Finally, let's ensure we are hard enabled */ |
| __hard_irq_enable(); |
| } |
| EXPORT_SYMBOL(arch_local_irq_restore); |
| |
| /* |
| * This is specifically called by assembly code to re-enable interrupts |
| * if they are currently disabled. This is typically called before |
| * schedule() or do_signal() when returning to userspace. We do it |
| * in C to avoid the burden of dealing with lockdep etc... |
| * |
| * NOTE: This is called with interrupts hard disabled but not marked |
| * as such in paca->irq_happened, so we need to resync this. |
| */ |
| void notrace restore_interrupts(void) |
| { |
| if (irqs_disabled()) { |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| local_irq_enable(); |
| } else |
| __hard_irq_enable(); |
| } |
| |
| /* |
| * This is a helper to use when about to go into idle low-power |
| * when the latter has the side effect of re-enabling interrupts |
| * (such as calling H_CEDE under pHyp). |
| * |
| * You call this function with interrupts soft-disabled (this is |
| * already the case when ppc_md.power_save is called). The function |
| * will return whether to enter power save or just return. |
| * |
| * In the former case, it will have notified lockdep of interrupts |
| * being re-enabled and generally sanitized the lazy irq state, |
| * and in the latter case it will leave with interrupts hard |
| * disabled and marked as such, so the local_irq_enable() call |
| * in arch_cpu_idle() will properly re-enable everything. |
| */ |
| bool prep_irq_for_idle(void) |
| { |
| /* |
| * First we need to hard disable to ensure no interrupt |
| * occurs before we effectively enter the low power state |
| */ |
| __hard_irq_disable(); |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| |
| /* |
| * If anything happened while we were soft-disabled, |
| * we return now and do not enter the low power state. |
| */ |
| if (lazy_irq_pending()) |
| return false; |
| |
| /* Tell lockdep we are about to re-enable */ |
| trace_hardirqs_on(); |
| |
| /* |
| * Mark interrupts as soft-enabled and clear the |
| * PACA_IRQ_HARD_DIS from the pending mask since we |
| * are about to hard enable as well as a side effect |
| * of entering the low power state. |
| */ |
| local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; |
| local_paca->soft_enabled = 1; |
| |
| /* Tell the caller to enter the low power state */ |
| return true; |
| } |
| |
| #ifdef CONFIG_PPC_BOOK3S |
| /* |
| * This is for idle sequences that return with IRQs off, but the |
| * idle state itself wakes on interrupt. Tell the irq tracer that |
| * IRQs are enabled for the duration of idle so it does not get long |
| * off times. Must be paired with fini_irq_for_idle_irqsoff. |
| */ |
| bool prep_irq_for_idle_irqsoff(void) |
| { |
| WARN_ON(!irqs_disabled()); |
| |
| /* |
| * First we need to hard disable to ensure no interrupt |
| * occurs before we effectively enter the low power state |
| */ |
| __hard_irq_disable(); |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| |
| /* |
| * If anything happened while we were soft-disabled, |
| * we return now and do not enter the low power state. |
| */ |
| if (lazy_irq_pending()) |
| return false; |
| |
| /* Tell lockdep we are about to re-enable */ |
| trace_hardirqs_on(); |
| |
| return true; |
| } |
| |
| /* |
| * Take the SRR1 wakeup reason, index into this table to find the |
| * appropriate irq_happened bit. |
| */ |
| static const u8 srr1_to_lazyirq[0x10] = { |
| 0, 0, 0, |
| PACA_IRQ_DBELL, |
| 0, |
| PACA_IRQ_DBELL, |
| PACA_IRQ_DEC, |
| 0, |
| PACA_IRQ_EE, |
| PACA_IRQ_EE, |
| PACA_IRQ_HMI, |
| 0, 0, 0, 0, 0 }; |
| |
| void irq_set_pending_from_srr1(unsigned long srr1) |
| { |
| unsigned int idx = (srr1 & SRR1_WAKEMASK_P8) >> 18; |
| |
| /* |
| * The 0 index (SRR1[42:45]=b0000) must always evaluate to 0, |
| * so this can be called unconditionally with srr1 wake reason. |
| */ |
| local_paca->irq_happened |= srr1_to_lazyirq[idx]; |
| } |
| #endif /* CONFIG_PPC_BOOK3S */ |
| |
| /* |
| * Force a replay of the external interrupt handler on this CPU. |
| */ |
| void force_external_irq_replay(void) |
| { |
| /* |
| * This must only be called with interrupts soft-disabled, |
| * the replay will happen when re-enabling. |
| */ |
| WARN_ON(!arch_irqs_disabled()); |
| |
| /* |
| * Interrupts must always be hard disabled before irq_happened is |
| * modified (to prevent lost update in case of interrupt between |
| * load and store). |
| */ |
| __hard_irq_disable(); |
| local_paca->irq_happened |= PACA_IRQ_HARD_DIS; |
| |
| /* Indicate in the PACA that we have an interrupt to replay */ |
| local_paca->irq_happened |= PACA_IRQ_EE; |
| } |
| |
| #endif /* CONFIG_PPC64 */ |
| |
| int arch_show_interrupts(struct seq_file *p, int prec) |
| { |
| int j; |
| |
| #if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT) |
| if (tau_initialized) { |
| seq_printf(p, "%*s: ", prec, "TAU"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", tau_interrupts(j)); |
| seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); |
| } |
| #endif /* CONFIG_PPC32 && CONFIG_TAU_INT */ |
| |
| seq_printf(p, "%*s: ", prec, "LOC"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs_event); |
| seq_printf(p, " Local timer interrupts for timer event device\n"); |
| |
| seq_printf(p, "%*s: ", prec, "LOC"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs_others); |
| seq_printf(p, " Local timer interrupts for others\n"); |
| |
| seq_printf(p, "%*s: ", prec, "SPU"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs); |
| seq_printf(p, " Spurious interrupts\n"); |
| |
| seq_printf(p, "%*s: ", prec, "PMI"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs); |
| seq_printf(p, " Performance monitoring interrupts\n"); |
| |
| seq_printf(p, "%*s: ", prec, "MCE"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions); |
| seq_printf(p, " Machine check exceptions\n"); |
| |
| if (cpu_has_feature(CPU_FTR_HVMODE)) { |
| seq_printf(p, "%*s: ", prec, "HMI"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", |
| per_cpu(irq_stat, j).hmi_exceptions); |
| seq_printf(p, " Hypervisor Maintenance Interrupts\n"); |
| } |
| |
| seq_printf(p, "%*s: ", prec, "NMI"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).sreset_irqs); |
| seq_printf(p, " System Reset interrupts\n"); |
| |
| #ifdef CONFIG_PPC_WATCHDOG |
| seq_printf(p, "%*s: ", prec, "WDG"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).soft_nmi_irqs); |
| seq_printf(p, " Watchdog soft-NMI interrupts\n"); |
| #endif |
| |
| #ifdef CONFIG_PPC_DOORBELL |
| if (cpu_has_feature(CPU_FTR_DBELL)) { |
| seq_printf(p, "%*s: ", prec, "DBL"); |
| for_each_online_cpu(j) |
| seq_printf(p, "%10u ", per_cpu(irq_stat, j).doorbell_irqs); |
| seq_printf(p, " Doorbell interrupts\n"); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| /* |
| * /proc/stat helpers |
| */ |
| u64 arch_irq_stat_cpu(unsigned int cpu) |
| { |
| u64 sum = per_cpu(irq_stat, cpu).timer_irqs_event; |
| |
| sum += per_cpu(irq_stat, cpu).pmu_irqs; |
| sum += per_cpu(irq_stat, cpu).mce_exceptions; |
| sum += per_cpu(irq_stat, cpu).spurious_irqs; |
| sum += per_cpu(irq_stat, cpu).timer_irqs_others; |
| sum += per_cpu(irq_stat, cpu).hmi_exceptions; |
| sum += per_cpu(irq_stat, cpu).sreset_irqs; |
| #ifdef CONFIG_PPC_WATCHDOG |
| sum += per_cpu(irq_stat, cpu).soft_nmi_irqs; |
| #endif |
| #ifdef CONFIG_PPC_DOORBELL |
| sum += per_cpu(irq_stat, cpu).doorbell_irqs; |
| #endif |
| |
| return sum; |
| } |
| |
| static inline void check_stack_overflow(void) |
| { |
| #ifdef CONFIG_DEBUG_STACKOVERFLOW |
| long sp; |
| |
| sp = current_stack_pointer() & (THREAD_SIZE-1); |
| |
| /* check for stack overflow: is there less than 2KB free? */ |
| if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { |
| pr_err("do_IRQ: stack overflow: %ld\n", |
| sp - sizeof(struct thread_info)); |
| dump_stack(); |
| } |
| #endif |
| } |
| |
| void __do_irq(struct pt_regs *regs) |
| { |
| unsigned int irq; |
| |
| irq_enter(); |
| |
| trace_irq_entry(regs); |
| |
| /* |
| * Query the platform PIC for the interrupt & ack it. |
| * |
| * This will typically lower the interrupt line to the CPU |
| */ |
| irq = ppc_md.get_irq(); |
| |
| /* We can hard enable interrupts now to allow perf interrupts */ |
| may_hard_irq_enable(); |
| |
| /* And finally process it */ |
| if (unlikely(!irq)) |
| __this_cpu_inc(irq_stat.spurious_irqs); |
| else |
| generic_handle_irq(irq); |
| |
| trace_irq_exit(regs); |
| |
| irq_exit(); |
| } |
| |
| void do_IRQ(struct pt_regs *regs) |
| { |
| struct pt_regs *old_regs = set_irq_regs(regs); |
| struct thread_info *curtp, *irqtp, *sirqtp; |
| |
| /* Switch to the irq stack to handle this */ |
| curtp = current_thread_info(); |
| irqtp = hardirq_ctx[raw_smp_processor_id()]; |
| sirqtp = softirq_ctx[raw_smp_processor_id()]; |
| |
| check_stack_overflow(); |
| |
| /* Already there ? */ |
| if (unlikely(curtp == irqtp || curtp == sirqtp)) { |
| __do_irq(regs); |
| set_irq_regs(old_regs); |
| return; |
| } |
| |
| /* Prepare the thread_info in the irq stack */ |
| irqtp->task = curtp->task; |
| irqtp->flags = 0; |
| |
| /* Copy the preempt_count so that the [soft]irq checks work. */ |
| irqtp->preempt_count = curtp->preempt_count; |
| |
| /* Switch stack and call */ |
| call_do_irq(regs, irqtp); |
| |
| /* Restore stack limit */ |
| irqtp->task = NULL; |
| |
| /* Copy back updates to the thread_info */ |
| if (irqtp->flags) |
| set_bits(irqtp->flags, &curtp->flags); |
| |
| set_irq_regs(old_regs); |
| } |
| |
| void __init init_IRQ(void) |
| { |
| if (ppc_md.init_IRQ) |
| ppc_md.init_IRQ(); |
| |
| exc_lvl_ctx_init(); |
| |
| irq_ctx_init(); |
| } |
| |
| #if defined(CONFIG_BOOKE) || defined(CONFIG_40x) |
| struct thread_info *critirq_ctx[NR_CPUS] __read_mostly; |
| struct thread_info *dbgirq_ctx[NR_CPUS] __read_mostly; |
| struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly; |
| |
| void exc_lvl_ctx_init(void) |
| { |
| struct thread_info *tp; |
| int i, cpu_nr; |
| |
| for_each_possible_cpu(i) { |
| #ifdef CONFIG_PPC64 |
| cpu_nr = i; |
| #else |
| #ifdef CONFIG_SMP |
| cpu_nr = get_hard_smp_processor_id(i); |
| #else |
| cpu_nr = 0; |
| #endif |
| #endif |
| |
| memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE); |
| tp = critirq_ctx[cpu_nr]; |
| tp->cpu = cpu_nr; |
| tp->preempt_count = 0; |
| |
| #ifdef CONFIG_BOOKE |
| memset((void *)dbgirq_ctx[cpu_nr], 0, THREAD_SIZE); |
| tp = dbgirq_ctx[cpu_nr]; |
| tp->cpu = cpu_nr; |
| tp->preempt_count = 0; |
| |
| memset((void *)mcheckirq_ctx[cpu_nr], 0, THREAD_SIZE); |
| tp = mcheckirq_ctx[cpu_nr]; |
| tp->cpu = cpu_nr; |
| tp->preempt_count = HARDIRQ_OFFSET; |
| #endif |
| } |
| } |
| #endif |
| |
| struct thread_info *softirq_ctx[NR_CPUS] __read_mostly; |
| struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly; |
| |
| void irq_ctx_init(void) |
| { |
| struct thread_info *tp; |
| int i; |
| |
| for_each_possible_cpu(i) { |
| memset((void *)softirq_ctx[i], 0, THREAD_SIZE); |
| tp = softirq_ctx[i]; |
| tp->cpu = i; |
| klp_init_thread_info(tp); |
| |
| memset((void *)hardirq_ctx[i], 0, THREAD_SIZE); |
| tp = hardirq_ctx[i]; |
| tp->cpu = i; |
| klp_init_thread_info(tp); |
| } |
| } |
| |
| void do_softirq_own_stack(void) |
| { |
| struct thread_info *curtp, *irqtp; |
| |
| curtp = current_thread_info(); |
| irqtp = softirq_ctx[smp_processor_id()]; |
| irqtp->task = curtp->task; |
| irqtp->flags = 0; |
| call_do_softirq(irqtp); |
| irqtp->task = NULL; |
| |
| /* Set any flag that may have been set on the |
| * alternate stack |
| */ |
| if (irqtp->flags) |
| set_bits(irqtp->flags, &curtp->flags); |
| } |
| |
| irq_hw_number_t virq_to_hw(unsigned int virq) |
| { |
| struct irq_data *irq_data = irq_get_irq_data(virq); |
| return WARN_ON(!irq_data) ? 0 : irq_data->hwirq; |
| } |
| EXPORT_SYMBOL_GPL(virq_to_hw); |
| |
| #ifdef CONFIG_SMP |
| int irq_choose_cpu(const struct cpumask *mask) |
| { |
| int cpuid; |
| |
| if (cpumask_equal(mask, cpu_online_mask)) { |
| static int irq_rover; |
| static DEFINE_RAW_SPINLOCK(irq_rover_lock); |
| unsigned long flags; |
| |
| /* Round-robin distribution... */ |
| do_round_robin: |
| raw_spin_lock_irqsave(&irq_rover_lock, flags); |
| |
| irq_rover = cpumask_next(irq_rover, cpu_online_mask); |
| if (irq_rover >= nr_cpu_ids) |
| irq_rover = cpumask_first(cpu_online_mask); |
| |
| cpuid = irq_rover; |
| |
| raw_spin_unlock_irqrestore(&irq_rover_lock, flags); |
| } else { |
| cpuid = cpumask_first_and(mask, cpu_online_mask); |
| if (cpuid >= nr_cpu_ids) |
| goto do_round_robin; |
| } |
| |
| return get_hard_smp_processor_id(cpuid); |
| } |
| #else |
| int irq_choose_cpu(const struct cpumask *mask) |
| { |
| return hard_smp_processor_id(); |
| } |
| #endif |
| |
| int arch_early_irq_init(void) |
| { |
| return 0; |
| } |
| |
| #ifdef CONFIG_PPC64 |
| static int __init setup_noirqdistrib(char *str) |
| { |
| distribute_irqs = 0; |
| return 1; |
| } |
| |
| __setup("noirqdistrib", setup_noirqdistrib); |
| #endif /* CONFIG_PPC64 */ |