| # SPDX-License-Identifier: GPL-2.0 |
| if (BF538 || BF539) |
| |
| source "arch/blackfin/mach-bf538/boards/Kconfig" |
| |
| menu "BF538 Specific Configuration" |
| |
| comment "Interrupt Priority Assignment" |
| menu "Priority" |
| |
| config IRQ_PLL_WAKEUP |
| int "IRQ_PLL_WAKEUP" |
| default 7 |
| config IRQ_DMA0_ERROR |
| int "IRQ_DMA0_ERROR" |
| default 7 |
| config IRQ_PPI_ERROR |
| int "IRQ_PPI_ERROR" |
| default 7 |
| config IRQ_SPORT0_ERROR |
| int "IRQ_SPORT0_ERROR" |
| default 7 |
| config IRQ_SPORT1_ERROR |
| int "IRQ_SPORT1_ERROR" |
| default 7 |
| config IRQ_SPI0_ERROR |
| int "IRQ_SPI0_ERROR" |
| default 7 |
| config IRQ_UART0_ERROR |
| int "IRQ_UART0_ERROR" |
| default 7 |
| config IRQ_RTC |
| int "IRQ_RTC" |
| default 8 |
| config IRQ_PPI |
| int "IRQ_PPI" |
| default 8 |
| config IRQ_SPORT0_RX |
| int "IRQ_SPORT0_RX" |
| default 9 |
| config IRQ_SPORT0_TX |
| int "IRQ_SPORT0_TX" |
| default 9 |
| config IRQ_SPORT1_RX |
| int "IRQ_SPORT1_RX" |
| default 9 |
| config IRQ_SPORT1_TX |
| int "IRQ_SPORT1_TX" |
| default 9 |
| config IRQ_SPI0 |
| int "IRQ_SPI0" |
| default 10 |
| config IRQ_UART0_RX |
| int "IRQ_UART0_RX" |
| default 10 |
| config IRQ_UART0_TX |
| int "IRQ_UART0_TX" |
| default 10 |
| config IRQ_TIMER0 |
| int "IRQ_TIMER0" |
| default 7 if TICKSOURCE_GPTMR0 |
| default 8 |
| config IRQ_TIMER1 |
| int "IRQ_TIMER1" |
| default 11 |
| config IRQ_TIMER2 |
| int "IRQ_TIMER2" |
| default 11 |
| config IRQ_PORTF_INTA |
| int "IRQ_PORTF_INTA" |
| default 12 |
| config IRQ_PORTF_INTB |
| int "IRQ_PORTF_INTB" |
| default 12 |
| config IRQ_MEM0_DMA0 |
| int "IRQ_MEM0_DMA0" |
| default 13 |
| config IRQ_MEM0_DMA1 |
| int "IRQ_MEM0_DMA1" |
| default 13 |
| config IRQ_WATCH |
| int "IRQ_WATCH" |
| default 13 |
| config IRQ_DMA1_ERROR |
| int "IRQ_DMA1_ERROR" |
| default 7 |
| config IRQ_SPORT2_ERROR |
| int "IRQ_SPORT2_ERROR" |
| default 7 |
| config IRQ_SPORT3_ERROR |
| int "IRQ_SPORT3_ERROR" |
| default 7 |
| config IRQ_SPI1_ERROR |
| int "IRQ_SPI1_ERROR" |
| default 7 |
| config IRQ_SPI2_ERROR |
| int "IRQ_SPI2_ERROR" |
| default 7 |
| config IRQ_UART1_ERROR |
| int "IRQ_UART1_ERROR" |
| default 7 |
| config IRQ_UART2_ERROR |
| int "IRQ_UART2_ERROR" |
| default 7 |
| config IRQ_CAN_ERROR |
| int "IRQ_CAN_ERROR" |
| default 7 |
| config IRQ_SPORT2_RX |
| int "IRQ_SPORT2_RX" |
| default 9 |
| config IRQ_SPORT2_TX |
| int "IRQ_SPORT2_TX" |
| default 9 |
| config IRQ_SPORT3_RX |
| int "IRQ_SPORT3_RX" |
| default 9 |
| config IRQ_SPORT3_TX |
| int "IRQ_SPORT3_TX" |
| default 9 |
| config IRQ_SPI1 |
| int "IRQ_SPI1" |
| default 10 |
| config IRQ_SPI2 |
| int "IRQ_SPI2" |
| default 10 |
| config IRQ_UART1_RX |
| int "IRQ_UART1_RX" |
| default 10 |
| config IRQ_UART1_TX |
| int "IRQ_UART1_TX" |
| default 10 |
| config IRQ_UART2_RX |
| int "IRQ_UART2_RX" |
| default 10 |
| config IRQ_UART2_TX |
| int "IRQ_UART2_TX" |
| default 10 |
| config IRQ_TWI0 |
| int "IRQ_TWI0" |
| default 11 |
| config IRQ_TWI1 |
| int "IRQ_TWI1" |
| default 11 |
| config IRQ_CAN_RX |
| int "IRQ_CAN_RX" |
| default 11 |
| config IRQ_CAN_TX |
| int "IRQ_CAN_TX" |
| default 11 |
| config IRQ_MEM1_DMA0 |
| int "IRQ_MEM1_DMA0" |
| default 13 |
| config IRQ_MEM1_DMA1 |
| int "IRQ_MEM1_DMA1" |
| default 13 |
| |
| help |
| Enter the priority numbers between 7-13 ONLY. Others are Reserved. |
| This applies to all the above. It is not recommended to assign the |
| highest priority number 7 to UART or any other device. |
| |
| endmenu |
| |
| endmenu |
| |
| endif |