| Developing Cipher Algorithms |
| ============================ |
| |
| Registering And Unregistering Transformation |
| -------------------------------------------- |
| |
| There are three distinct types of registration functions in the Crypto |
| API. One is used to register a generic cryptographic transformation, |
| while the other two are specific to HASH transformations and |
| COMPRESSion. We will discuss the latter two in a separate chapter, here |
| we will only look at the generic ones. |
| |
| Before discussing the register functions, the data structure to be |
| filled with each, struct crypto_alg, must be considered -- see below |
| for a description of this data structure. |
| |
| The generic registration functions can be found in |
| include/linux/crypto.h and their definition can be seen below. The |
| former function registers a single transformation, while the latter |
| works on an array of transformation descriptions. The latter is useful |
| when registering transformations in bulk, for example when a driver |
| implements multiple transformations. |
| |
| :: |
| |
| int crypto_register_alg(struct crypto_alg *alg); |
| int crypto_register_algs(struct crypto_alg *algs, int count); |
| |
| |
| The counterparts to those functions are listed below. |
| |
| :: |
| |
| int crypto_unregister_alg(struct crypto_alg *alg); |
| int crypto_unregister_algs(struct crypto_alg *algs, int count); |
| |
| |
| Notice that both registration and unregistration functions do return a |
| value, so make sure to handle errors. A return code of zero implies |
| success. Any return code < 0 implies an error. |
| |
| The bulk registration/unregistration functions register/unregister each |
| transformation in the given array of length count. They handle errors as |
| follows: |
| |
| - crypto_register_algs() succeeds if and only if it successfully |
| registers all the given transformations. If an error occurs partway |
| through, then it rolls back successful registrations before returning |
| the error code. Note that if a driver needs to handle registration |
| errors for individual transformations, then it will need to use the |
| non-bulk function crypto_register_alg() instead. |
| |
| - crypto_unregister_algs() tries to unregister all the given |
| transformations, continuing on error. It logs errors and always |
| returns zero. |
| |
| Single-Block Symmetric Ciphers [CIPHER] |
| --------------------------------------- |
| |
| Example of transformations: aes, arc4, ... |
| |
| This section describes the simplest of all transformation |
| implementations, that being the CIPHER type used for symmetric ciphers. |
| The CIPHER type is used for transformations which operate on exactly one |
| block at a time and there are no dependencies between blocks at all. |
| |
| Registration specifics |
| ~~~~~~~~~~~~~~~~~~~~~~ |
| |
| The registration of [CIPHER] algorithm is specific in that struct |
| crypto_alg field .cra_type is empty. The .cra_u.cipher has to be |
| filled in with proper callbacks to implement this transformation. |
| |
| See struct cipher_alg below. |
| |
| Cipher Definition With struct cipher_alg |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| Struct cipher_alg defines a single block cipher. |
| |
| Here are schematics of how these functions are called when operated from |
| other part of the kernel. Note that the .cia_setkey() call might happen |
| before or after any of these schematics happen, but must not happen |
| during any of these are in-flight. |
| |
| :: |
| |
| KEY ---. PLAINTEXT ---. |
| v v |
| .cia_setkey() -> .cia_encrypt() |
| | |
| '-----> CIPHERTEXT |
| |
| |
| Please note that a pattern where .cia_setkey() is called multiple times |
| is also valid: |
| |
| :: |
| |
| |
| KEY1 --. PLAINTEXT1 --. KEY2 --. PLAINTEXT2 --. |
| v v v v |
| .cia_setkey() -> .cia_encrypt() -> .cia_setkey() -> .cia_encrypt() |
| | | |
| '---> CIPHERTEXT1 '---> CIPHERTEXT2 |
| |
| |
| Multi-Block Ciphers |
| ------------------- |
| |
| Example of transformations: cbc(aes), ecb(arc4), ... |
| |
| This section describes the multi-block cipher transformation |
| implementations. The multi-block ciphers are used for transformations |
| which operate on scatterlists of data supplied to the transformation |
| functions. They output the result into a scatterlist of data as well. |
| |
| Registration Specifics |
| ~~~~~~~~~~~~~~~~~~~~~~ |
| |
| The registration of multi-block cipher algorithms is one of the most |
| standard procedures throughout the crypto API. |
| |
| Note, if a cipher implementation requires a proper alignment of data, |
| the caller should use the functions of crypto_skcipher_alignmask() to |
| identify a memory alignment mask. The kernel crypto API is able to |
| process requests that are unaligned. This implies, however, additional |
| overhead as the kernel crypto API needs to perform the realignment of |
| the data which may imply moving of data. |
| |
| Cipher Definition With struct blkcipher_alg and ablkcipher_alg |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| Struct blkcipher_alg defines a synchronous block cipher whereas struct |
| ablkcipher_alg defines an asynchronous block cipher. |
| |
| Please refer to the single block cipher description for schematics of |
| the block cipher usage. |
| |
| Specifics Of Asynchronous Multi-Block Cipher |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| There are a couple of specifics to the asynchronous interface. |
| |
| First of all, some of the drivers will want to use the Generic |
| ScatterWalk in case the hardware needs to be fed separate chunks of the |
| scatterlist which contains the plaintext and will contain the |
| ciphertext. Please refer to the ScatterWalk interface offered by the |
| Linux kernel scatter / gather list implementation. |
| |
| Hashing [HASH] |
| -------------- |
| |
| Example of transformations: crc32, md5, sha1, sha256,... |
| |
| Registering And Unregistering The Transformation |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| There are multiple ways to register a HASH transformation, depending on |
| whether the transformation is synchronous [SHASH] or asynchronous |
| [AHASH] and the amount of HASH transformations we are registering. You |
| can find the prototypes defined in include/crypto/internal/hash.h: |
| |
| :: |
| |
| int crypto_register_ahash(struct ahash_alg *alg); |
| |
| int crypto_register_shash(struct shash_alg *alg); |
| int crypto_register_shashes(struct shash_alg *algs, int count); |
| |
| |
| The respective counterparts for unregistering the HASH transformation |
| are as follows: |
| |
| :: |
| |
| int crypto_unregister_ahash(struct ahash_alg *alg); |
| |
| int crypto_unregister_shash(struct shash_alg *alg); |
| int crypto_unregister_shashes(struct shash_alg *algs, int count); |
| |
| |
| Cipher Definition With struct shash_alg and ahash_alg |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| Here are schematics of how these functions are called when operated from |
| other part of the kernel. Note that the .setkey() call might happen |
| before or after any of these schematics happen, but must not happen |
| during any of these are in-flight. Please note that calling .init() |
| followed immediately by .finish() is also a perfectly valid |
| transformation. |
| |
| :: |
| |
| I) DATA -----------. |
| v |
| .init() -> .update() -> .final() ! .update() might not be called |
| ^ | | at all in this scenario. |
| '----' '---> HASH |
| |
| II) DATA -----------.-----------. |
| v v |
| .init() -> .update() -> .finup() ! .update() may not be called |
| ^ | | at all in this scenario. |
| '----' '---> HASH |
| |
| III) DATA -----------. |
| v |
| .digest() ! The entire process is handled |
| | by the .digest() call. |
| '---------------> HASH |
| |
| |
| Here is a schematic of how the .export()/.import() functions are called |
| when used from another part of the kernel. |
| |
| :: |
| |
| KEY--. DATA--. |
| v v ! .update() may not be called |
| .setkey() -> .init() -> .update() -> .export() at all in this scenario. |
| ^ | | |
| '-----' '--> PARTIAL_HASH |
| |
| ----------- other transformations happen here ----------- |
| |
| PARTIAL_HASH--. DATA1--. |
| v v |
| .import -> .update() -> .final() ! .update() may not be called |
| ^ | | at all in this scenario. |
| '----' '--> HASH1 |
| |
| PARTIAL_HASH--. DATA2-. |
| v v |
| .import -> .finup() |
| | |
| '---------------> HASH2 |
| |
| |
| Specifics Of Asynchronous HASH Transformation |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| Some of the drivers will want to use the Generic ScatterWalk in case the |
| implementation needs to be fed separate chunks of the scatterlist which |
| contains the input data. The buffer containing the resulting hash will |
| always be properly aligned to .cra_alignmask so there is no need to |
| worry about this. |