| What: /sys/bus/fcoe/ |
| Date: August 2012 |
| KernelVersion: TBD |
| Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org |
| Description: The FCoE bus. Attributes in this directory are control interfaces. |
| Attributes: |
| |
| ctlr_create: 'FCoE Controller' instance creation interface. Writing an |
| <ifname> to this file will allocate and populate sysfs with a |
| fcoe_ctlr_device (ctlr_X). The user can then configure any |
| per-port settings and finally write to the fcoe_ctlr_device's |
| 'start' attribute to begin the kernel's discovery and login |
| process. |
| |
| ctlr_destroy: 'FCoE Controller' instance removal interface. Writing a |
| fcoe_ctlr_device's sysfs name to this file will log the |
| fcoe_ctlr_device out of the fabric or otherwise connected |
| FCoE devices. It will also free all kernel memory allocated |
| for this fcoe_ctlr_device and any structures associated |
| with it, this includes the scsi_host. |
| |
| What: /sys/bus/fcoe/devices/ctlr_X |
| Date: March 2012 |
| KernelVersion: TBD |
| Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org |
| Description: 'FCoE Controller' instances on the fcoe bus. |
| The FCoE Controller now has a three stage creation process. |
| 1) Write interface name to ctlr_create 2) Configure the FCoE |
| Controller (ctlr_X) 3) Enable the FCoE Controller to begin |
| discovery and login. The FCoE Controller is destroyed by |
| writing it's name, i.e. ctlr_X to the ctlr_delete file. |
| |
| Attributes: |
| |
| fcf_dev_loss_tmo: Device loss timeout period (see below). Changing |
| this value will change the dev_loss_tmo for all |
| FCFs discovered by this controller. |
| |
| mode: Display or change the FCoE Controller's mode. Possible |
| modes are 'Fabric' and 'VN2VN'. If a FCoE Controller |
| is started in 'Fabric' mode then FIP FCF discovery is |
| initiated and ultimately a fabric login is attempted. |
| If a FCoE Controller is started in 'VN2VN' mode then |
| FIP VN2VN discovery and login is performed. A FCoE |
| Controller only supports one mode at a time. |
| |
| enabled: Whether an FCoE controller is enabled or disabled. |
| 0 if disabled, 1 if enabled. Writing either 0 or 1 |
| to this file will enable or disable the FCoE controller. |
| |
| lesb/link_fail: Link Error Status Block (LESB) link failure count. |
| |
| lesb/vlink_fail: Link Error Status Block (LESB) virtual link |
| failure count. |
| |
| lesb/miss_fka: Link Error Status Block (LESB) missed FCoE |
| Initialization Protocol (FIP) Keep-Alives (FKA). |
| |
| lesb/symb_err: Link Error Status Block (LESB) symbolic error count. |
| |
| lesb/err_block: Link Error Status Block (LESB) block error count. |
| |
| lesb/fcs_error: Link Error Status Block (LESB) Fibre Channel |
| Services error count. |
| |
| Notes: ctlr_X (global increment starting at 0) |
| |
| What: /sys/bus/fcoe/devices/fcf_X |
| Date: March 2012 |
| KernelVersion: TBD |
| Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org |
| Description: 'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel |
| Forwarder, which is a FCoE switch that can accept FCoE |
| (Ethernet) packets, unpack them, and forward the embedded |
| Fibre Channel frames into a FC fabric. It can also take |
| outbound FC frames and pack them in Ethernet packets to |
| be sent to their destination on the Ethernet segment. |
| Attributes: |
| |
| fabric_name: Identifies the fabric that the FCF services. |
| |
| switch_name: Identifies the FCF. |
| |
| priority: The switch's priority amongst other FCFs on the same |
| fabric. |
| |
| selected: 1 indicates that the switch has been selected for use; |
| 0 indicates that the switch will not be used. |
| |
| fc_map: The Fibre Channel MAP |
| |
| vfid: The Virtual Fabric ID |
| |
| mac: The FCF's MAC address |
| |
| fka_period: The FIP Keep-Alive period |
| |
| fabric_state: The internal kernel state |
| "Unknown" - Initialization value |
| "Disconnected" - No link to the FCF/fabric |
| "Connected" - Host is connected to the FCF |
| "Deleted" - FCF is being removed from the system |
| |
| dev_loss_tmo: The device loss timeout period for this FCF. |
| |
| Notes: A device loss infrastructure similar to the FC Transport's |
| is present in fcoe_sysfs. It is nice to have so that a |
| link flapping adapter doesn't continually advance the count |
| used to identify the discovered FCF. FCFs will exist in a |
| "Disconnected" state until either the timer expires and the |
| FCF becomes "Deleted" or the FCF is rediscovered and becomes |
| "Connected." |
| |
| |
| Users: The first user of this interface will be the fcoeadm application, |
| which is commonly packaged in the fcoe-utils package. |