| /* |
| * Copyright 2012 Freescale Semiconductor, Inc. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| interrupt-parent = <&icoll>; |
| |
| aliases { |
| gpio0 = &gpio0; |
| gpio1 = &gpio1; |
| gpio2 = &gpio2; |
| serial0 = &auart0; |
| serial1 = &auart1; |
| }; |
| |
| cpus { |
| cpu@0 { |
| compatible = "arm,arm926ejs"; |
| }; |
| }; |
| |
| apb@80000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x80000>; |
| ranges; |
| |
| apbh@80000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x40000>; |
| ranges; |
| |
| icoll: interrupt-controller@80000000 { |
| compatible = "fsl,imx23-icoll", "fsl,mxs-icoll"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x80000000 0x2000>; |
| }; |
| |
| dma-apbh@80004000 { |
| compatible = "fsl,imx23-dma-apbh"; |
| reg = <0x80004000 0x2000>; |
| }; |
| |
| ecc@80008000 { |
| reg = <0x80008000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| gpmi-nand@8000c000 { |
| compatible = "fsl,imx23-gpmi-nand"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; |
| reg-names = "gpmi-nand", "bch"; |
| interrupts = <13>, <56>; |
| interrupt-names = "gpmi-dma", "bch"; |
| fsl,gpmi-dma-channel = <4>; |
| status = "disabled"; |
| }; |
| |
| ssp0: ssp@80010000 { |
| reg = <0x80010000 0x2000>; |
| interrupts = <15 14>; |
| fsl,ssp-dma-channel = <1>; |
| status = "disabled"; |
| }; |
| |
| etm@80014000 { |
| reg = <0x80014000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| pinctrl@80018000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx23-pinctrl", "simple-bus"; |
| reg = <0x80018000 0x2000>; |
| |
| gpio0: gpio@0 { |
| compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; |
| interrupts = <16>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@1 { |
| compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; |
| interrupts = <17>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2 { |
| compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; |
| interrupts = <18>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| duart_pins_a: duart@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x11a2 /* MX23_PAD_PWM0__DUART_RX */ |
| 0x11b2 /* MX23_PAD_PWM1__DUART_TX */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| auart0_pins_a: auart0@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */ |
| 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */ |
| 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */ |
| 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| gpmi_pins_a: gpmi-nand@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */ |
| 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */ |
| 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */ |
| 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */ |
| 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */ |
| 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */ |
| 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */ |
| 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */ |
| 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */ |
| 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */ |
| 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */ |
| 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */ |
| 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ |
| 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ |
| 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ |
| 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */ |
| 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| gpmi_pins_fixup: gpmi-pins-fixup { |
| fsl,pinmux-ids = < |
| 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ |
| 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ |
| 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ |
| >; |
| fsl,drive-strength = <2>; |
| }; |
| |
| mmc0_4bit_pins_a: mmc0-4bit@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ |
| 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ |
| 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ |
| 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ |
| 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ |
| 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ |
| 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mmc0_8bit_pins_a: mmc0-8bit@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ |
| 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ |
| 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ |
| 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ |
| 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */ |
| 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */ |
| 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */ |
| 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */ |
| 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ |
| 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ |
| 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ |
| >; |
| fsl,drive-strength = <1>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <1>; |
| }; |
| |
| mmc0_pins_fixup: mmc0-pins-fixup { |
| fsl,pinmux-ids = < |
| 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ |
| 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ |
| >; |
| fsl,pull-up = <0>; |
| }; |
| |
| pwm2_pins_a: pwm2@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x11c0 /* MX23_PAD_PWM2__PWM2 */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| |
| lcdif_24bit_pins_a: lcdif-24bit@0 { |
| reg = <0>; |
| fsl,pinmux-ids = < |
| 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */ |
| 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */ |
| 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */ |
| 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */ |
| 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */ |
| 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */ |
| 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */ |
| 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */ |
| 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */ |
| 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */ |
| 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */ |
| 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */ |
| 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */ |
| 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */ |
| 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */ |
| 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */ |
| 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */ |
| 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */ |
| 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */ |
| 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */ |
| 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */ |
| 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */ |
| 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */ |
| 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */ |
| 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */ |
| 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */ |
| 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */ |
| 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */ |
| >; |
| fsl,drive-strength = <0>; |
| fsl,voltage = <1>; |
| fsl,pull-up = <0>; |
| }; |
| }; |
| |
| digctl@8001c000 { |
| reg = <0x8001c000 2000>; |
| status = "disabled"; |
| }; |
| |
| emi@80020000 { |
| reg = <0x80020000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| dma-apbx@80024000 { |
| compatible = "fsl,imx23-dma-apbx"; |
| reg = <0x80024000 0x2000>; |
| }; |
| |
| dcp@80028000 { |
| reg = <0x80028000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| pxp@8002a000 { |
| reg = <0x8002a000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| ocotp@8002c000 { |
| reg = <0x8002c000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| axi-ahb@8002e000 { |
| reg = <0x8002e000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| lcdif@80030000 { |
| compatible = "fsl,imx23-lcdif"; |
| reg = <0x80030000 2000>; |
| interrupts = <46 45>; |
| status = "disabled"; |
| }; |
| |
| ssp1: ssp@80034000 { |
| reg = <0x80034000 0x2000>; |
| interrupts = <2 20>; |
| fsl,ssp-dma-channel = <2>; |
| status = "disabled"; |
| }; |
| |
| tvenc@80038000 { |
| reg = <0x80038000 0x2000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| apbx@80040000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80040000 0x40000>; |
| ranges; |
| |
| clkctl@80040000 { |
| reg = <0x80040000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| saif0: saif@80042000 { |
| reg = <0x80042000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| power@80044000 { |
| reg = <0x80044000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| saif1: saif@80046000 { |
| reg = <0x80046000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| audio-out@80048000 { |
| reg = <0x80048000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| audio-in@8004c000 { |
| reg = <0x8004c000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| lradc@80050000 { |
| reg = <0x80050000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| spdif@80054000 { |
| reg = <0x80054000 2000>; |
| status = "disabled"; |
| }; |
| |
| i2c@80058000 { |
| reg = <0x80058000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| rtc@8005c000 { |
| compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; |
| reg = <0x8005c000 0x2000>; |
| interrupts = <22>; |
| }; |
| |
| pwm: pwm@80064000 { |
| compatible = "fsl,imx23-pwm"; |
| reg = <0x80064000 0x2000>; |
| #pwm-cells = <2>; |
| fsl,pwm-number = <5>; |
| status = "disabled"; |
| }; |
| |
| timrot@80068000 { |
| reg = <0x80068000 0x2000>; |
| status = "disabled"; |
| }; |
| |
| auart0: serial@8006c000 { |
| compatible = "fsl,imx23-auart"; |
| reg = <0x8006c000 0x2000>; |
| interrupts = <24 25 23>; |
| status = "disabled"; |
| }; |
| |
| auart1: serial@8006e000 { |
| compatible = "fsl,imx23-auart"; |
| reg = <0x8006e000 0x2000>; |
| interrupts = <59 60 58>; |
| status = "disabled"; |
| }; |
| |
| duart: serial@80070000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x80070000 0x2000>; |
| interrupts = <0>; |
| status = "disabled"; |
| }; |
| |
| usbphy@8007c000 { |
| reg = <0x8007c000 0x2000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| ahb@80080000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80080000 0x80000>; |
| ranges; |
| |
| usbctrl@80080000 { |
| reg = <0x80080000 0x40000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |