| /* DVB frontend part of the Linux driver for TwinhanDTV Alpha/MagicBoxII USB2.0 |
| * DVB-T receiver. |
| * |
| * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) |
| * |
| * Thanks to Twinhan who kindly provided hardware and information. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation, version 2. |
| * |
| * see Documentation/dvb/README.dvb-usb for more information |
| * |
| */ |
| #include "vp7045.h" |
| |
| /* It is a Zarlink MT352 within a Samsung Tuner (DNOS404ZH102A) - 040929 - AAT |
| * |
| * Programming is hidden inside the firmware, so set_frontend is very easy. |
| * Even though there is a Firmware command that one can use to access the demod |
| * via its registers. This is used for status information. |
| */ |
| |
| struct vp7045_fe_state { |
| struct dvb_frontend fe; |
| struct dvb_usb_device *d; |
| }; |
| |
| |
| static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) |
| { |
| struct vp7045_fe_state *state = fe->demodulator_priv; |
| u8 s0 = vp7045_read_reg(state->d,0x00), |
| s1 = vp7045_read_reg(state->d,0x01), |
| s3 = vp7045_read_reg(state->d,0x03); |
| |
| *status = 0; |
| if (s0 & (1 << 4)) |
| *status |= FE_HAS_CARRIER; |
| if (s0 & (1 << 1)) |
| *status |= FE_HAS_VITERBI; |
| if (s0 & (1 << 5)) |
| *status |= FE_HAS_LOCK; |
| if (s1 & (1 << 1)) |
| *status |= FE_HAS_SYNC; |
| if (s3 & (1 << 6)) |
| *status |= FE_HAS_SIGNAL; |
| |
| if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != |
| (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) |
| *status &= ~FE_HAS_LOCK; |
| |
| return 0; |
| } |
| |
| static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber) |
| { |
| struct vp7045_fe_state *state = fe->demodulator_priv; |
| *ber = (vp7045_read_reg(state->d, 0x0D) << 16) | |
| (vp7045_read_reg(state->d, 0x0E) << 8) | |
| vp7045_read_reg(state->d, 0x0F); |
| return 0; |
| } |
| |
| static int vp7045_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) |
| { |
| struct vp7045_fe_state *state = fe->demodulator_priv; |
| *unc = (vp7045_read_reg(state->d, 0x10) << 8) | |
| vp7045_read_reg(state->d, 0x11); |
| return 0; |
| } |
| |
| static int vp7045_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) |
| { |
| struct vp7045_fe_state *state = fe->demodulator_priv; |
| u16 signal = (vp7045_read_reg(state->d, 0x14) << 8) | |
| vp7045_read_reg(state->d, 0x15); |
| |
| *strength = ~signal; |
| return 0; |
| } |
| |
| static int vp7045_fe_read_snr(struct dvb_frontend* fe, u16 *snr) |
| { |
| struct vp7045_fe_state *state = fe->demodulator_priv; |
| u8 _snr = vp7045_read_reg(state->d, 0x09); |
| *snr = (_snr << 8) | _snr; |
| return 0; |
| } |
| |
| static int vp7045_fe_init(struct dvb_frontend* fe) |
| { |
| return 0; |
| } |
| |
| static int vp7045_fe_sleep(struct dvb_frontend* fe) |
| { |
| return 0; |
| } |
| |
| static int vp7045_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) |
| { |
| tune->min_delay_ms = 800; |
| return 0; |
| } |
| |
| static int vp7045_fe_set_frontend(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *fep) |
| { |
| struct vp7045_fe_state *state = fe->demodulator_priv; |
| u8 buf[5]; |
| u32 freq = fep->frequency / 1000; |
| |
| buf[0] = (freq >> 16) & 0xff; |
| buf[1] = (freq >> 8) & 0xff; |
| buf[2] = freq & 0xff; |
| buf[3] = 0; |
| |
| switch (fep->u.ofdm.bandwidth) { |
| case BANDWIDTH_8_MHZ: buf[4] = 8; break; |
| case BANDWIDTH_7_MHZ: buf[4] = 7; break; |
| case BANDWIDTH_6_MHZ: buf[4] = 6; break; |
| case BANDWIDTH_AUTO: return -EOPNOTSUPP; |
| default: |
| return -EINVAL; |
| } |
| |
| vp7045_usb_op(state->d,LOCK_TUNER_COMMAND,buf,5,NULL,0,200); |
| return 0; |
| } |
| |
| static int vp7045_fe_get_frontend(struct dvb_frontend* fe, |
| struct dvb_frontend_parameters *fep) |
| { |
| return 0; |
| } |
| |
| static void vp7045_fe_release(struct dvb_frontend* fe) |
| { |
| struct vp7045_fe_state *state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops vp7045_fe_ops; |
| |
| struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d) |
| { |
| struct vp7045_fe_state *s = kmalloc(sizeof(struct vp7045_fe_state), GFP_KERNEL); |
| if (s == NULL) |
| goto error; |
| memset(s,0,sizeof(struct vp7045_fe_state)); |
| |
| s->d = d; |
| s->fe.ops = &vp7045_fe_ops; |
| s->fe.demodulator_priv = s; |
| |
| goto success; |
| error: |
| return NULL; |
| success: |
| return &s->fe; |
| } |
| |
| |
| static struct dvb_frontend_ops vp7045_fe_ops = { |
| .info = { |
| .name = "Twinhan VP7045/46 USB DVB-T", |
| .type = FE_OFDM, |
| .frequency_min = 44250000, |
| .frequency_max = 867250000, |
| .frequency_stepsize = 1000, |
| .caps = FE_CAN_INVERSION_AUTO | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_RECOVER | |
| FE_CAN_HIERARCHY_AUTO, |
| }, |
| |
| .release = vp7045_fe_release, |
| |
| .init = vp7045_fe_init, |
| .sleep = vp7045_fe_sleep, |
| |
| .set_frontend = vp7045_fe_set_frontend, |
| .get_frontend = vp7045_fe_get_frontend, |
| .get_tune_settings = vp7045_fe_get_tune_settings, |
| |
| .read_status = vp7045_fe_read_status, |
| .read_ber = vp7045_fe_read_ber, |
| .read_signal_strength = vp7045_fe_read_signal_strength, |
| .read_snr = vp7045_fe_read_snr, |
| .read_ucblocks = vp7045_fe_read_unc_blocks, |
| }; |