| /* |
| * OHCI HCD (Host Controller Driver) for USB. |
| * |
| * Bus Glue for Atheros AR71XX/AR724X built-in OHCI controller. |
| * |
| * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> |
| * |
| * Parts of this file are based on Atheros' 2.6.15 BSP |
| * Copyright (C) 2007 Atheros Communications, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| */ |
| |
| #include <linux/platform_device.h> |
| |
| static int __devinit ohci_ath79_start(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| int ret; |
| |
| ret = ohci_init(ohci); |
| if (ret < 0) |
| return ret; |
| |
| ret = ohci_run(ohci); |
| if (ret < 0) |
| goto err; |
| |
| return 0; |
| |
| err: |
| ohci_stop(hcd); |
| return ret; |
| } |
| |
| static const struct hc_driver ohci_ath79_hc_driver = { |
| .description = hcd_name, |
| .product_desc = "Atheros built-in OHCI controller", |
| .hcd_priv_size = sizeof(struct ohci_hcd), |
| |
| .irq = ohci_irq, |
| .flags = HCD_USB11 | HCD_MEMORY, |
| |
| .start = ohci_ath79_start, |
| .stop = ohci_stop, |
| .shutdown = ohci_shutdown, |
| |
| .urb_enqueue = ohci_urb_enqueue, |
| .urb_dequeue = ohci_urb_dequeue, |
| .endpoint_disable = ohci_endpoint_disable, |
| |
| /* |
| * scheduling support |
| */ |
| .get_frame_number = ohci_get_frame, |
| |
| /* |
| * root hub support |
| */ |
| .hub_status_data = ohci_hub_status_data, |
| .hub_control = ohci_hub_control, |
| .start_port_reset = ohci_start_port_reset, |
| }; |
| |
| static int ohci_ath79_probe(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd; |
| struct resource *res; |
| int irq; |
| int ret; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_dbg(&pdev->dev, "no IRQ specified\n"); |
| return -ENODEV; |
| } |
| irq = res->start; |
| |
| hcd = usb_create_hcd(&ohci_ath79_hc_driver, &pdev->dev, |
| dev_name(&pdev->dev)); |
| if (!hcd) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_dbg(&pdev->dev, "no base address specified\n"); |
| ret = -ENODEV; |
| goto err_put_hcd; |
| } |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| |
| if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { |
| dev_dbg(&pdev->dev, "controller already in use\n"); |
| ret = -EBUSY; |
| goto err_put_hcd; |
| } |
| |
| hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); |
| if (!hcd->regs) { |
| dev_dbg(&pdev->dev, "error mapping memory\n"); |
| ret = -EFAULT; |
| goto err_release_region; |
| } |
| |
| ohci_hcd_init(hcd_to_ohci(hcd)); |
| |
| ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); |
| if (ret) |
| goto err_stop_hcd; |
| |
| return 0; |
| |
| err_stop_hcd: |
| iounmap(hcd->regs); |
| err_release_region: |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| err_put_hcd: |
| usb_put_hcd(hcd); |
| return ret; |
| } |
| |
| static int ohci_ath79_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| |
| usb_remove_hcd(hcd); |
| iounmap(hcd->regs); |
| release_mem_region(hcd->rsrc_start, hcd->rsrc_len); |
| usb_put_hcd(hcd); |
| |
| return 0; |
| } |
| |
| static struct platform_driver ohci_hcd_ath79_driver = { |
| .probe = ohci_ath79_probe, |
| .remove = ohci_ath79_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "ath79-ohci", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ohci"); |