| /* |
| * Texas Instruments ADS7950 SPI ADC driver |
| * |
| * Copyright 2016 David Lechner <david@lechnology.com> |
| * |
| * Based on iio/ad7923.c: |
| * Copyright 2011 Analog Devices Inc |
| * Copyright 2012 CS Systemes d'Information |
| * |
| * And also on hwmon/ads79xx.c |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ |
| * Nishanth Menon |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| |
| #define TI_ADS7950_CR_MANUAL BIT(12) |
| #define TI_ADS7950_CR_WRITE BIT(11) |
| #define TI_ADS7950_CR_CHAN(ch) ((ch) << 7) |
| #define TI_ADS7950_CR_RANGE_5V BIT(6) |
| |
| #define TI_ADS7950_MAX_CHAN 16 |
| |
| #define TI_ADS7950_TIMESTAMP_SIZE (sizeof(int64_t) / sizeof(__be16)) |
| |
| /* val = value, dec = left shift, bits = number of bits of the mask */ |
| #define TI_ADS7950_EXTRACT(val, dec, bits) \ |
| (((val) >> (dec)) & ((1 << (bits)) - 1)) |
| |
| struct ti_ads7950_state { |
| struct spi_device *spi; |
| struct spi_transfer ring_xfer[TI_ADS7950_MAX_CHAN + 2]; |
| struct spi_transfer scan_single_xfer[3]; |
| struct spi_message ring_msg; |
| struct spi_message scan_single_msg; |
| |
| struct regulator *reg; |
| |
| unsigned int settings; |
| |
| /* |
| * DMA (thus cache coherency maintenance) requires the |
| * transfer buffers to live in their own cache lines. |
| */ |
| __be16 rx_buf[TI_ADS7950_MAX_CHAN + TI_ADS7950_TIMESTAMP_SIZE] |
| ____cacheline_aligned; |
| __be16 tx_buf[TI_ADS7950_MAX_CHAN]; |
| }; |
| |
| struct ti_ads7950_chip_info { |
| const struct iio_chan_spec *channels; |
| unsigned int num_channels; |
| }; |
| |
| enum ti_ads7950_id { |
| TI_ADS7950, |
| TI_ADS7951, |
| TI_ADS7952, |
| TI_ADS7953, |
| TI_ADS7954, |
| TI_ADS7955, |
| TI_ADS7956, |
| TI_ADS7957, |
| TI_ADS7958, |
| TI_ADS7959, |
| TI_ADS7960, |
| TI_ADS7961, |
| }; |
| |
| #define TI_ADS7950_V_CHAN(index, bits) \ |
| { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = index, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| .address = index, \ |
| .datasheet_name = "CH##index", \ |
| .scan_index = index, \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = bits, \ |
| .storagebits = 16, \ |
| .shift = 12 - (bits), \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| #define DECLARE_TI_ADS7950_4_CHANNELS(name, bits) \ |
| const struct iio_chan_spec name ## _channels[] = { \ |
| TI_ADS7950_V_CHAN(0, bits), \ |
| TI_ADS7950_V_CHAN(1, bits), \ |
| TI_ADS7950_V_CHAN(2, bits), \ |
| TI_ADS7950_V_CHAN(3, bits), \ |
| IIO_CHAN_SOFT_TIMESTAMP(4), \ |
| } |
| |
| #define DECLARE_TI_ADS7950_8_CHANNELS(name, bits) \ |
| const struct iio_chan_spec name ## _channels[] = { \ |
| TI_ADS7950_V_CHAN(0, bits), \ |
| TI_ADS7950_V_CHAN(1, bits), \ |
| TI_ADS7950_V_CHAN(2, bits), \ |
| TI_ADS7950_V_CHAN(3, bits), \ |
| TI_ADS7950_V_CHAN(4, bits), \ |
| TI_ADS7950_V_CHAN(5, bits), \ |
| TI_ADS7950_V_CHAN(6, bits), \ |
| TI_ADS7950_V_CHAN(7, bits), \ |
| IIO_CHAN_SOFT_TIMESTAMP(8), \ |
| } |
| |
| #define DECLARE_TI_ADS7950_12_CHANNELS(name, bits) \ |
| const struct iio_chan_spec name ## _channels[] = { \ |
| TI_ADS7950_V_CHAN(0, bits), \ |
| TI_ADS7950_V_CHAN(1, bits), \ |
| TI_ADS7950_V_CHAN(2, bits), \ |
| TI_ADS7950_V_CHAN(3, bits), \ |
| TI_ADS7950_V_CHAN(4, bits), \ |
| TI_ADS7950_V_CHAN(5, bits), \ |
| TI_ADS7950_V_CHAN(6, bits), \ |
| TI_ADS7950_V_CHAN(7, bits), \ |
| TI_ADS7950_V_CHAN(8, bits), \ |
| TI_ADS7950_V_CHAN(9, bits), \ |
| TI_ADS7950_V_CHAN(10, bits), \ |
| TI_ADS7950_V_CHAN(11, bits), \ |
| IIO_CHAN_SOFT_TIMESTAMP(12), \ |
| } |
| |
| #define DECLARE_TI_ADS7950_16_CHANNELS(name, bits) \ |
| const struct iio_chan_spec name ## _channels[] = { \ |
| TI_ADS7950_V_CHAN(0, bits), \ |
| TI_ADS7950_V_CHAN(1, bits), \ |
| TI_ADS7950_V_CHAN(2, bits), \ |
| TI_ADS7950_V_CHAN(3, bits), \ |
| TI_ADS7950_V_CHAN(4, bits), \ |
| TI_ADS7950_V_CHAN(5, bits), \ |
| TI_ADS7950_V_CHAN(6, bits), \ |
| TI_ADS7950_V_CHAN(7, bits), \ |
| TI_ADS7950_V_CHAN(8, bits), \ |
| TI_ADS7950_V_CHAN(9, bits), \ |
| TI_ADS7950_V_CHAN(10, bits), \ |
| TI_ADS7950_V_CHAN(11, bits), \ |
| TI_ADS7950_V_CHAN(12, bits), \ |
| TI_ADS7950_V_CHAN(13, bits), \ |
| TI_ADS7950_V_CHAN(14, bits), \ |
| TI_ADS7950_V_CHAN(15, bits), \ |
| IIO_CHAN_SOFT_TIMESTAMP(16), \ |
| } |
| |
| static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7950, 12); |
| static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7951, 12); |
| static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7952, 12); |
| static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7953, 12); |
| static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7954, 10); |
| static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7955, 10); |
| static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7956, 10); |
| static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7957, 10); |
| static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7958, 8); |
| static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7959, 8); |
| static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7960, 8); |
| static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7961, 8); |
| |
| static const struct ti_ads7950_chip_info ti_ads7950_chip_info[] = { |
| [TI_ADS7950] = { |
| .channels = ti_ads7950_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7950_channels), |
| }, |
| [TI_ADS7951] = { |
| .channels = ti_ads7951_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7951_channels), |
| }, |
| [TI_ADS7952] = { |
| .channels = ti_ads7952_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7952_channels), |
| }, |
| [TI_ADS7953] = { |
| .channels = ti_ads7953_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7953_channels), |
| }, |
| [TI_ADS7954] = { |
| .channels = ti_ads7954_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7954_channels), |
| }, |
| [TI_ADS7955] = { |
| .channels = ti_ads7955_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7955_channels), |
| }, |
| [TI_ADS7956] = { |
| .channels = ti_ads7956_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7956_channels), |
| }, |
| [TI_ADS7957] = { |
| .channels = ti_ads7957_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7957_channels), |
| }, |
| [TI_ADS7958] = { |
| .channels = ti_ads7958_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7958_channels), |
| }, |
| [TI_ADS7959] = { |
| .channels = ti_ads7959_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7959_channels), |
| }, |
| [TI_ADS7960] = { |
| .channels = ti_ads7960_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7960_channels), |
| }, |
| [TI_ADS7961] = { |
| .channels = ti_ads7961_channels, |
| .num_channels = ARRAY_SIZE(ti_ads7961_channels), |
| }, |
| }; |
| |
| /* |
| * ti_ads7950_update_scan_mode() setup the spi transfer buffer for the new |
| * scan mask |
| */ |
| static int ti_ads7950_update_scan_mode(struct iio_dev *indio_dev, |
| const unsigned long *active_scan_mask) |
| { |
| struct ti_ads7950_state *st = iio_priv(indio_dev); |
| int i, cmd, len; |
| |
| len = 0; |
| for_each_set_bit(i, active_scan_mask, indio_dev->num_channels) { |
| cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(i) | st->settings; |
| st->tx_buf[len++] = cpu_to_be16(cmd); |
| } |
| |
| /* Data for the 1st channel is not returned until the 3rd transfer */ |
| len += 2; |
| for (i = 0; i < len; i++) { |
| if ((i + 2) < len) |
| st->ring_xfer[i].tx_buf = &st->tx_buf[i]; |
| if (i >= 2) |
| st->ring_xfer[i].rx_buf = &st->rx_buf[i - 2]; |
| st->ring_xfer[i].len = 2; |
| st->ring_xfer[i].cs_change = 1; |
| } |
| /* make sure last transfer's cs_change is not set */ |
| st->ring_xfer[len - 1].cs_change = 0; |
| |
| spi_message_init_with_transfers(&st->ring_msg, st->ring_xfer, len); |
| |
| return 0; |
| } |
| |
| static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct ti_ads7950_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| ret = spi_sync(st->spi, &st->ring_msg); |
| if (ret < 0) |
| goto out; |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf, |
| iio_get_time_ns(indio_dev)); |
| |
| out: |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ti_ads7950_scan_direct(struct ti_ads7950_state *st, unsigned int ch) |
| { |
| int ret, cmd; |
| |
| cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings; |
| st->tx_buf[0] = cpu_to_be16(cmd); |
| |
| ret = spi_sync(st->spi, &st->scan_single_msg); |
| if (ret) |
| return ret; |
| |
| return be16_to_cpu(st->rx_buf[0]); |
| } |
| |
| static int ti_ads7950_get_range(struct ti_ads7950_state *st) |
| { |
| int vref; |
| |
| vref = regulator_get_voltage(st->reg); |
| if (vref < 0) |
| return vref; |
| |
| vref /= 1000; |
| |
| if (st->settings & TI_ADS7950_CR_RANGE_5V) |
| vref *= 2; |
| |
| return vref; |
| } |
| |
| static int ti_ads7950_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long m) |
| { |
| struct ti_ads7950_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| switch (m) { |
| case IIO_CHAN_INFO_RAW: |
| |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = ti_ads7950_scan_direct(st, chan->address); |
| iio_device_release_direct_mode(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| if (chan->address != TI_ADS7950_EXTRACT(ret, 12, 4)) |
| return -EIO; |
| |
| *val = TI_ADS7950_EXTRACT(ret, chan->scan_type.shift, |
| chan->scan_type.realbits); |
| |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| ret = ti_ads7950_get_range(st); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret; |
| *val2 = (1 << chan->scan_type.realbits) - 1; |
| |
| return IIO_VAL_FRACTIONAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const struct iio_info ti_ads7950_info = { |
| .read_raw = &ti_ads7950_read_raw, |
| .update_scan_mode = ti_ads7950_update_scan_mode, |
| .driver_module = THIS_MODULE, |
| }; |
| |
| static int ti_ads7950_probe(struct spi_device *spi) |
| { |
| struct ti_ads7950_state *st; |
| struct iio_dev *indio_dev; |
| const struct ti_ads7950_chip_info *info; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| |
| spi_set_drvdata(spi, indio_dev); |
| |
| st->spi = spi; |
| st->settings = TI_ADS7950_CR_MANUAL | TI_ADS7950_CR_RANGE_5V; |
| |
| info = &ti_ads7950_chip_info[spi_get_device_id(spi)->driver_data]; |
| |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->dev.parent = &spi->dev; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = info->channels; |
| indio_dev->num_channels = info->num_channels; |
| indio_dev->info = &ti_ads7950_info; |
| |
| /* |
| * Setup default message. The sample is read at the end of the first |
| * transfer, then it takes one full cycle to convert the sample and one |
| * more cycle to send the value. The conversion process is driven by |
| * the SPI clock, which is why we have 3 transfers. The middle one is |
| * just dummy data sent while the chip is converting the sample that |
| * was read at the end of the first transfer. |
| */ |
| |
| st->scan_single_xfer[0].tx_buf = &st->tx_buf[0]; |
| st->scan_single_xfer[0].len = 2; |
| st->scan_single_xfer[0].cs_change = 1; |
| st->scan_single_xfer[1].tx_buf = &st->tx_buf[0]; |
| st->scan_single_xfer[1].len = 2; |
| st->scan_single_xfer[1].cs_change = 1; |
| st->scan_single_xfer[2].rx_buf = &st->rx_buf[0]; |
| st->scan_single_xfer[2].len = 2; |
| |
| spi_message_init_with_transfers(&st->scan_single_msg, |
| st->scan_single_xfer, 3); |
| |
| st->reg = devm_regulator_get(&spi->dev, "vref"); |
| if (IS_ERR(st->reg)) { |
| dev_err(&spi->dev, "Failed get get regulator \"vref\"\n"); |
| return PTR_ERR(st->reg); |
| } |
| |
| ret = regulator_enable(st->reg); |
| if (ret) { |
| dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n"); |
| return ret; |
| } |
| |
| ret = iio_triggered_buffer_setup(indio_dev, NULL, |
| &ti_ads7950_trigger_handler, NULL); |
| if (ret) { |
| dev_err(&spi->dev, "Failed to setup triggered buffer\n"); |
| goto error_disable_reg; |
| } |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) { |
| dev_err(&spi->dev, "Failed to register iio device\n"); |
| goto error_cleanup_ring; |
| } |
| |
| return 0; |
| |
| error_cleanup_ring: |
| iio_triggered_buffer_cleanup(indio_dev); |
| error_disable_reg: |
| regulator_disable(st->reg); |
| |
| return ret; |
| } |
| |
| static int ti_ads7950_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct ti_ads7950_state *st = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| iio_triggered_buffer_cleanup(indio_dev); |
| regulator_disable(st->reg); |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id ti_ads7950_id[] = { |
| { "ads7950", TI_ADS7950 }, |
| { "ads7951", TI_ADS7951 }, |
| { "ads7952", TI_ADS7952 }, |
| { "ads7953", TI_ADS7953 }, |
| { "ads7954", TI_ADS7954 }, |
| { "ads7955", TI_ADS7955 }, |
| { "ads7956", TI_ADS7956 }, |
| { "ads7957", TI_ADS7957 }, |
| { "ads7958", TI_ADS7958 }, |
| { "ads7959", TI_ADS7959 }, |
| { "ads7960", TI_ADS7960 }, |
| { "ads7961", TI_ADS7961 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, ti_ads7950_id); |
| |
| static struct spi_driver ti_ads7950_driver = { |
| .driver = { |
| .name = "ads7950", |
| }, |
| .probe = ti_ads7950_probe, |
| .remove = ti_ads7950_remove, |
| .id_table = ti_ads7950_id, |
| }; |
| module_spi_driver(ti_ads7950_driver); |
| |
| MODULE_AUTHOR("David Lechner <david@lechnology.com>"); |
| MODULE_DESCRIPTION("TI TI_ADS7950 ADC"); |
| MODULE_LICENSE("GPL v2"); |