| /* |
| * P5020DS Device Tree Source |
| * |
| * Copyright 2010 - 2014 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /include/ "fsl/p5020si-pre.dtsi" |
| |
| / { |
| model = "fsl,P5020DS"; |
| compatible = "fsl,P5020DS"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&mpic>; |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| bman_fbpr: bman-fbpr { |
| size = <0 0x1000000>; |
| alignment = <0 0x1000000>; |
| }; |
| qman_fqd: qman-fqd { |
| size = <0 0x400000>; |
| alignment = <0 0x400000>; |
| }; |
| qman_pfdr: qman-pfdr { |
| size = <0 0x2000000>; |
| alignment = <0 0x2000000>; |
| }; |
| }; |
| |
| dcsr: dcsr@f00000000 { |
| ranges = <0x00000000 0xf 0x00000000 0x01008000>; |
| }; |
| |
| bportals: bman-portals@ff4000000 { |
| ranges = <0x0 0xf 0xf4000000 0x200000>; |
| }; |
| |
| qportals: qman-portals@ff4200000 { |
| ranges = <0x0 0xf 0xf4200000 0x200000>; |
| }; |
| |
| soc: soc@ffe000000 { |
| ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| reg = <0xf 0xfe000000 0 0x00001000>; |
| spi@110000 { |
| flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "spansion,s25sl12801"; |
| reg = <0>; |
| spi-max-frequency = <40000000>; /* input clock */ |
| partition@u-boot { |
| label = "u-boot"; |
| reg = <0x00000000 0x00100000>; |
| read-only; |
| }; |
| partition@kernel { |
| label = "kernel"; |
| reg = <0x00100000 0x00500000>; |
| read-only; |
| }; |
| partition@dtb { |
| label = "dtb"; |
| reg = <0x00600000 0x00100000>; |
| read-only; |
| }; |
| partition@fs { |
| label = "file system"; |
| reg = <0x00700000 0x00900000>; |
| }; |
| }; |
| }; |
| |
| i2c@118100 { |
| eeprom@51 { |
| compatible = "at24,24c256"; |
| reg = <0x51>; |
| }; |
| eeprom@52 { |
| compatible = "at24,24c256"; |
| reg = <0x52>; |
| }; |
| }; |
| |
| i2c@119100 { |
| rtc@68 { |
| compatible = "dallas,ds3232"; |
| reg = <0x68>; |
| interrupts = <0x1 0x1 0 0>; |
| }; |
| ina220@40 { |
| compatible = "ti,ina220"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| ina220@41 { |
| compatible = "ti,ina220"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| ina220@44 { |
| compatible = "ti,ina220"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| ina220@45 { |
| compatible = "ti,ina220"; |
| reg = <0x45>; |
| shunt-resistor = <1000>; |
| }; |
| adt7461@4c { |
| compatible = "adi,adt7461"; |
| reg = <0x4c>; |
| }; |
| }; |
| }; |
| |
| rio: rapidio@ffe0c0000 { |
| reg = <0xf 0xfe0c0000 0 0x11000>; |
| |
| port1 { |
| ranges = <0 0 0xc 0x20000000 0 0x10000000>; |
| }; |
| port2 { |
| ranges = <0 0 0xc 0x30000000 0 0x10000000>; |
| }; |
| }; |
| |
| lbc: localbus@ffe124000 { |
| reg = <0xf 0xfe124000 0 0x1000>; |
| ranges = <0 0 0xf 0xe8000000 0x08000000 |
| 2 0 0xf 0xffa00000 0x00040000 |
| 3 0 0xf 0xffdf0000 0x00008000>; |
| |
| flash@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0 0 0x08000000>; |
| bank-width = <2>; |
| device-width = <2>; |
| }; |
| |
| nand@2,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,elbc-fcm-nand"; |
| reg = <0x2 0x0 0x40000>; |
| |
| partition@0 { |
| label = "NAND U-Boot Image"; |
| reg = <0x0 0x02000000>; |
| read-only; |
| }; |
| |
| partition@2000000 { |
| label = "NAND Root File System"; |
| reg = <0x02000000 0x10000000>; |
| }; |
| |
| partition@12000000 { |
| label = "NAND Compressed RFS Image"; |
| reg = <0x12000000 0x08000000>; |
| }; |
| |
| partition@1a000000 { |
| label = "NAND Linux Kernel Image"; |
| reg = <0x1a000000 0x04000000>; |
| }; |
| |
| partition@1e000000 { |
| label = "NAND DTB Image"; |
| reg = <0x1e000000 0x01000000>; |
| }; |
| |
| partition@1f000000 { |
| label = "NAND Writable User area"; |
| reg = <0x1f000000 0x21000000>; |
| }; |
| }; |
| |
| board-control@3,0 { |
| compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; |
| reg = <3 0 0x30>; |
| }; |
| }; |
| |
| pci0: pcie@ffe200000 { |
| reg = <0xf 0xfe200000 0 0x1000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 |
| 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci1: pcie@ffe201000 { |
| reg = <0xf 0xfe201000 0 0x1000>; |
| ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 |
| 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci2: pcie@ffe202000 { |
| reg = <0xf 0xfe202000 0 0x1000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 |
| 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci3: pcie@ffe203000 { |
| reg = <0xf 0xfe203000 0 0x1000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 |
| 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| }; |
| |
| /include/ "fsl/p5020si-post.dtsi" |