| /* include/asm-generic/tlb.h |
| * |
| * Generic TLB shootdown code |
| * |
| * Copyright 2001 Red Hat, Inc. |
| * Based on code from mm/memory.c Copyright Linus Torvalds and others. |
| * |
| * Copyright 2011 Red Hat, Inc., Peter Zijlstra |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #ifndef _ASM_GENERIC__TLB_H |
| #define _ASM_GENERIC__TLB_H |
| |
| #include <linux/swap.h> |
| #include <asm/pgalloc.h> |
| #include <asm/tlbflush.h> |
| |
| #ifdef CONFIG_HAVE_RCU_TABLE_FREE |
| /* |
| * Semi RCU freeing of the page directories. |
| * |
| * This is needed by some architectures to implement software pagetable walkers. |
| * |
| * gup_fast() and other software pagetable walkers do a lockless page-table |
| * walk and therefore needs some synchronization with the freeing of the page |
| * directories. The chosen means to accomplish that is by disabling IRQs over |
| * the walk. |
| * |
| * Architectures that use IPIs to flush TLBs will then automagically DTRT, |
| * since we unlink the page, flush TLBs, free the page. Since the disabling of |
| * IRQs delays the completion of the TLB flush we can never observe an already |
| * freed page. |
| * |
| * Architectures that do not have this (PPC) need to delay the freeing by some |
| * other means, this is that means. |
| * |
| * What we do is batch the freed directory pages (tables) and RCU free them. |
| * We use the sched RCU variant, as that guarantees that IRQ/preempt disabling |
| * holds off grace periods. |
| * |
| * However, in order to batch these pages we need to allocate storage, this |
| * allocation is deep inside the MM code and can thus easily fail on memory |
| * pressure. To guarantee progress we fall back to single table freeing, see |
| * the implementation of tlb_remove_table_one(). |
| * |
| */ |
| struct mmu_table_batch { |
| struct rcu_head rcu; |
| unsigned int nr; |
| void *tables[0]; |
| }; |
| |
| #define MAX_TABLE_BATCH \ |
| ((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *)) |
| |
| extern void tlb_table_flush(struct mmu_gather *tlb); |
| extern void tlb_remove_table(struct mmu_gather *tlb, void *table); |
| |
| #endif |
| |
| /* |
| * If we can't allocate a page to make a big batch of page pointers |
| * to work on, then just handle a few from the on-stack structure. |
| */ |
| #define MMU_GATHER_BUNDLE 8 |
| |
| struct mmu_gather_batch { |
| struct mmu_gather_batch *next; |
| unsigned int nr; |
| unsigned int max; |
| struct page *pages[0]; |
| }; |
| |
| #define MAX_GATHER_BATCH \ |
| ((PAGE_SIZE - sizeof(struct mmu_gather_batch)) / sizeof(void *)) |
| |
| /* |
| * Limit the maximum number of mmu_gather batches to reduce a risk of soft |
| * lockups for non-preemptible kernels on huge machines when a lot of memory |
| * is zapped during unmapping. |
| * 10K pages freed at once should be safe even without a preemption point. |
| */ |
| #define MAX_GATHER_BATCH_COUNT (10000UL/MAX_GATHER_BATCH) |
| |
| /* struct mmu_gather is an opaque type used by the mm code for passing around |
| * any data needed by arch specific code for tlb_remove_page. |
| */ |
| struct mmu_gather { |
| struct mm_struct *mm; |
| #ifdef CONFIG_HAVE_RCU_TABLE_FREE |
| struct mmu_table_batch *batch; |
| #endif |
| unsigned long start; |
| unsigned long end; |
| /* we are in the middle of an operation to clear |
| * a full mm and can make some optimizations */ |
| unsigned int fullmm : 1, |
| /* we have performed an operation which |
| * requires a complete flush of the tlb */ |
| need_flush_all : 1; |
| |
| struct mmu_gather_batch *active; |
| struct mmu_gather_batch local; |
| struct page *__pages[MMU_GATHER_BUNDLE]; |
| unsigned int batch_count; |
| int page_size; |
| }; |
| |
| #define HAVE_GENERIC_MMU_GATHER |
| |
| void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end); |
| void tlb_flush_mmu(struct mmu_gather *tlb); |
| void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, |
| unsigned long end); |
| extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, |
| int page_size); |
| |
| static inline void __tlb_adjust_range(struct mmu_gather *tlb, |
| unsigned long address, |
| unsigned int range_size) |
| { |
| tlb->start = min(tlb->start, address); |
| tlb->end = max(tlb->end, address + range_size); |
| } |
| |
| static inline void __tlb_reset_range(struct mmu_gather *tlb) |
| { |
| if (tlb->fullmm) { |
| tlb->start = tlb->end = ~0; |
| } else { |
| tlb->start = TASK_SIZE; |
| tlb->end = 0; |
| } |
| } |
| |
| static inline void tlb_remove_page_size(struct mmu_gather *tlb, |
| struct page *page, int page_size) |
| { |
| if (__tlb_remove_page_size(tlb, page, page_size)) |
| tlb_flush_mmu(tlb); |
| } |
| |
| static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page) |
| { |
| return __tlb_remove_page_size(tlb, page, PAGE_SIZE); |
| } |
| |
| /* tlb_remove_page |
| * Similar to __tlb_remove_page but will call tlb_flush_mmu() itself when |
| * required. |
| */ |
| static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) |
| { |
| return tlb_remove_page_size(tlb, page, PAGE_SIZE); |
| } |
| |
| #ifndef tlb_remove_check_page_size_change |
| #define tlb_remove_check_page_size_change tlb_remove_check_page_size_change |
| static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb, |
| unsigned int page_size) |
| { |
| /* |
| * We don't care about page size change, just update |
| * mmu_gather page size here so that debug checks |
| * doesn't throw false warning. |
| */ |
| #ifdef CONFIG_DEBUG_VM |
| tlb->page_size = page_size; |
| #endif |
| } |
| #endif |
| |
| /* |
| * In the case of tlb vma handling, we can optimise these away in the |
| * case where we're doing a full MM flush. When we're doing a munmap, |
| * the vmas are adjusted to only cover the region to be torn down. |
| */ |
| #ifndef tlb_start_vma |
| #define tlb_start_vma(tlb, vma) do { } while (0) |
| #endif |
| |
| #define __tlb_end_vma(tlb, vma) \ |
| do { \ |
| if (!tlb->fullmm && tlb->end) { \ |
| tlb_flush(tlb); \ |
| __tlb_reset_range(tlb); \ |
| } \ |
| } while (0) |
| |
| #ifndef tlb_end_vma |
| #define tlb_end_vma __tlb_end_vma |
| #endif |
| |
| #ifndef __tlb_remove_tlb_entry |
| #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) |
| #endif |
| |
| /** |
| * tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation. |
| * |
| * Record the fact that pte's were really unmapped by updating the range, |
| * so we can later optimise away the tlb invalidate. This helps when |
| * userspace is unmapping already-unmapped pages, which happens quite a lot. |
| */ |
| #define tlb_remove_tlb_entry(tlb, ptep, address) \ |
| do { \ |
| __tlb_adjust_range(tlb, address, PAGE_SIZE); \ |
| __tlb_remove_tlb_entry(tlb, ptep, address); \ |
| } while (0) |
| |
| #define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \ |
| do { \ |
| __tlb_adjust_range(tlb, address, huge_page_size(h)); \ |
| __tlb_remove_tlb_entry(tlb, ptep, address); \ |
| } while (0) |
| |
| /** |
| * tlb_remove_pmd_tlb_entry - remember a pmd mapping for later tlb invalidation |
| * This is a nop so far, because only x86 needs it. |
| */ |
| #ifndef __tlb_remove_pmd_tlb_entry |
| #define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0) |
| #endif |
| |
| #define tlb_remove_pmd_tlb_entry(tlb, pmdp, address) \ |
| do { \ |
| __tlb_adjust_range(tlb, address, HPAGE_PMD_SIZE); \ |
| __tlb_remove_pmd_tlb_entry(tlb, pmdp, address); \ |
| } while (0) |
| |
| /** |
| * tlb_remove_pud_tlb_entry - remember a pud mapping for later tlb |
| * invalidation. This is a nop so far, because only x86 needs it. |
| */ |
| #ifndef __tlb_remove_pud_tlb_entry |
| #define __tlb_remove_pud_tlb_entry(tlb, pudp, address) do {} while (0) |
| #endif |
| |
| #define tlb_remove_pud_tlb_entry(tlb, pudp, address) \ |
| do { \ |
| __tlb_adjust_range(tlb, address, HPAGE_PUD_SIZE); \ |
| __tlb_remove_pud_tlb_entry(tlb, pudp, address); \ |
| } while (0) |
| |
| /* |
| * For things like page tables caches (ie caching addresses "inside" the |
| * page tables, like x86 does), for legacy reasons, flushing an |
| * individual page had better flush the page table caches behind it. This |
| * is definitely how x86 works, for example. And if you have an |
| * architected non-legacy page table cache (which I'm not aware of |
| * anybody actually doing), you're going to have some architecturally |
| * explicit flushing for that, likely *separate* from a regular TLB entry |
| * flush, and thus you'd need more than just some range expansion.. |
| * |
| * So if we ever find an architecture |
| * that would want something that odd, I think it is up to that |
| * architecture to do its own odd thing, not cause pain for others |
| * http://lkml.kernel.org/r/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com |
| * |
| * For now w.r.t page table cache, mark the range_size as PAGE_SIZE |
| */ |
| |
| #define pte_free_tlb(tlb, ptep, address) \ |
| do { \ |
| __tlb_adjust_range(tlb, address, PAGE_SIZE); \ |
| __pte_free_tlb(tlb, ptep, address); \ |
| } while (0) |
| |
| #ifndef __ARCH_HAS_4LEVEL_HACK |
| #define pud_free_tlb(tlb, pudp, address) \ |
| do { \ |
| __tlb_adjust_range(tlb, address, PAGE_SIZE); \ |
| __pud_free_tlb(tlb, pudp, address); \ |
| } while (0) |
| #endif |
| |
| #define pmd_free_tlb(tlb, pmdp, address) \ |
| do { \ |
| __tlb_adjust_range(tlb, address, PAGE_SIZE); \ |
| __pmd_free_tlb(tlb, pmdp, address); \ |
| } while (0) |
| |
| #define tlb_migrate_finish(mm) do {} while (0) |
| |
| #endif /* _ASM_GENERIC__TLB_H */ |