| /* |
| * Driver for the Cirrus EP93xx matrix keypad controller. |
| * |
| * Copyright (c) 2008 H Hartley Sweeten <hsweeten@visionengravers.com> |
| * |
| * Based on the pxa27x matrix keypad controller by Rodolfo Giometti. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * NOTE: |
| * |
| * The 3-key reset is triggered by pressing the 3 keys in |
| * Row 0, Columns 2, 4, and 7 at the same time. This action can |
| * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag. |
| * |
| * Normal operation for the matrix does not autorepeat the key press. |
| * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT |
| * flag. |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/input/matrix_keypad.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/ep93xx_keypad.h> |
| |
| /* |
| * Keypad Interface Register offsets |
| */ |
| #define KEY_INIT 0x00 /* Key Scan Initialization register */ |
| #define KEY_DIAG 0x04 /* Key Scan Diagnostic register */ |
| #define KEY_REG 0x08 /* Key Value Capture register */ |
| |
| /* Key Scan Initialization Register bit defines */ |
| #define KEY_INIT_DBNC_MASK (0x00ff0000) |
| #define KEY_INIT_DBNC_SHIFT (16) |
| #define KEY_INIT_DIS3KY (1<<15) |
| #define KEY_INIT_DIAG (1<<14) |
| #define KEY_INIT_BACK (1<<13) |
| #define KEY_INIT_T2 (1<<12) |
| #define KEY_INIT_PRSCL_MASK (0x000003ff) |
| #define KEY_INIT_PRSCL_SHIFT (0) |
| |
| /* Key Scan Diagnostic Register bit defines */ |
| #define KEY_DIAG_MASK (0x0000003f) |
| #define KEY_DIAG_SHIFT (0) |
| |
| /* Key Value Capture Register bit defines */ |
| #define KEY_REG_K (1<<15) |
| #define KEY_REG_INT (1<<14) |
| #define KEY_REG_2KEYS (1<<13) |
| #define KEY_REG_1KEY (1<<12) |
| #define KEY_REG_KEY2_MASK (0x00000fc0) |
| #define KEY_REG_KEY2_SHIFT (6) |
| #define KEY_REG_KEY1_MASK (0x0000003f) |
| #define KEY_REG_KEY1_SHIFT (0) |
| |
| #define EP93XX_MATRIX_SIZE (EP93XX_MATRIX_ROWS * EP93XX_MATRIX_COLS) |
| |
| struct ep93xx_keypad { |
| struct ep93xx_keypad_platform_data *pdata; |
| struct input_dev *input_dev; |
| struct clk *clk; |
| |
| void __iomem *mmio_base; |
| |
| unsigned int matrix_keycodes[EP93XX_MATRIX_SIZE]; |
| |
| int key1; |
| int key2; |
| |
| int irq; |
| |
| bool enabled; |
| }; |
| |
| static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad) |
| { |
| struct ep93xx_keypad_platform_data *pdata = keypad->pdata; |
| struct input_dev *input_dev = keypad->input_dev; |
| unsigned int *key; |
| int i; |
| |
| key = &pdata->matrix_key_map[0]; |
| for (i = 0; i < pdata->matrix_key_map_size; i++, key++) { |
| int row = KEY_ROW(*key); |
| int col = KEY_COL(*key); |
| int code = KEY_VAL(*key); |
| |
| keypad->matrix_keycodes[(row << 3) + col] = code; |
| __set_bit(code, input_dev->keybit); |
| } |
| } |
| |
| static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id) |
| { |
| struct ep93xx_keypad *keypad = dev_id; |
| struct input_dev *input_dev = keypad->input_dev; |
| unsigned int status; |
| int keycode, key1, key2; |
| |
| status = __raw_readl(keypad->mmio_base + KEY_REG); |
| |
| keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT; |
| key1 = keypad->matrix_keycodes[keycode]; |
| |
| keycode = (status & KEY_REG_KEY2_MASK) >> KEY_REG_KEY2_SHIFT; |
| key2 = keypad->matrix_keycodes[keycode]; |
| |
| if (status & KEY_REG_2KEYS) { |
| if (keypad->key1 && key1 != keypad->key1 && key2 != keypad->key1) |
| input_report_key(input_dev, keypad->key1, 0); |
| |
| if (keypad->key2 && key1 != keypad->key2 && key2 != keypad->key2) |
| input_report_key(input_dev, keypad->key2, 0); |
| |
| input_report_key(input_dev, key1, 1); |
| input_report_key(input_dev, key2, 1); |
| |
| keypad->key1 = key1; |
| keypad->key2 = key2; |
| |
| } else if (status & KEY_REG_1KEY) { |
| if (keypad->key1 && key1 != keypad->key1) |
| input_report_key(input_dev, keypad->key1, 0); |
| |
| if (keypad->key2 && key1 != keypad->key2) |
| input_report_key(input_dev, keypad->key2, 0); |
| |
| input_report_key(input_dev, key1, 1); |
| |
| keypad->key1 = key1; |
| keypad->key2 = 0; |
| |
| } else { |
| input_report_key(input_dev, keypad->key1, 0); |
| input_report_key(input_dev, keypad->key2, 0); |
| |
| keypad->key1 = keypad->key2 = 0; |
| } |
| input_sync(input_dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void ep93xx_keypad_config(struct ep93xx_keypad *keypad) |
| { |
| struct ep93xx_keypad_platform_data *pdata = keypad->pdata; |
| unsigned int val = 0; |
| |
| if (pdata->flags & EP93XX_KEYPAD_KDIV) |
| clk_set_rate(keypad->clk, EP93XX_KEYTCHCLK_DIV4); |
| else |
| clk_set_rate(keypad->clk, EP93XX_KEYTCHCLK_DIV16); |
| |
| if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY) |
| val |= KEY_INIT_DIS3KY; |
| if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE) |
| val |= KEY_INIT_DIAG; |
| if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE) |
| val |= KEY_INIT_BACK; |
| if (pdata->flags & EP93XX_KEYPAD_TEST_MODE) |
| val |= KEY_INIT_T2; |
| |
| val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK); |
| |
| val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK); |
| |
| __raw_writel(val, keypad->mmio_base + KEY_INIT); |
| } |
| |
| static int ep93xx_keypad_open(struct input_dev *pdev) |
| { |
| struct ep93xx_keypad *keypad = input_get_drvdata(pdev); |
| |
| if (!keypad->enabled) { |
| ep93xx_keypad_config(keypad); |
| clk_enable(keypad->clk); |
| keypad->enabled = true; |
| } |
| |
| return 0; |
| } |
| |
| static void ep93xx_keypad_close(struct input_dev *pdev) |
| { |
| struct ep93xx_keypad *keypad = input_get_drvdata(pdev); |
| |
| if (keypad->enabled) { |
| clk_disable(keypad->clk); |
| keypad->enabled = false; |
| } |
| } |
| |
| |
| #ifdef CONFIG_PM |
| /* |
| * NOTE: I don't know if this is correct, or will work on the ep93xx. |
| * |
| * None of the existing ep93xx drivers have power management support. |
| * But, this is basically what the pxa27x_keypad driver does. |
| */ |
| static int ep93xx_keypad_suspend(struct platform_device *pdev, |
| pm_message_t state) |
| { |
| struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); |
| struct input_dev *input_dev = keypad->input_dev; |
| |
| mutex_lock(&input_dev->mutex); |
| |
| if (keypad->enabled) { |
| clk_disable(keypad->clk); |
| keypad->enabled = false; |
| } |
| |
| mutex_unlock(&input_dev->mutex); |
| |
| if (device_may_wakeup(&pdev->dev)) |
| enable_irq_wake(keypad->irq); |
| |
| return 0; |
| } |
| |
| static int ep93xx_keypad_resume(struct platform_device *pdev) |
| { |
| struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); |
| struct input_dev *input_dev = keypad->input_dev; |
| |
| if (device_may_wakeup(&pdev->dev)) |
| disable_irq_wake(keypad->irq); |
| |
| mutex_lock(&input_dev->mutex); |
| |
| if (input_dev->users) { |
| if (!keypad->enabled) { |
| ep93xx_keypad_config(keypad); |
| clk_enable(keypad->clk); |
| keypad->enabled = true; |
| } |
| } |
| |
| mutex_unlock(&input_dev->mutex); |
| |
| return 0; |
| } |
| #else /* !CONFIG_PM */ |
| #define ep93xx_keypad_suspend NULL |
| #define ep93xx_keypad_resume NULL |
| #endif /* !CONFIG_PM */ |
| |
| static int __devinit ep93xx_keypad_probe(struct platform_device *pdev) |
| { |
| struct ep93xx_keypad *keypad; |
| struct input_dev *input_dev; |
| struct resource *res; |
| int err; |
| |
| keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL); |
| if (!keypad) |
| return -ENOMEM; |
| |
| keypad->pdata = pdev->dev.platform_data; |
| if (!keypad->pdata) { |
| err = -EINVAL; |
| goto failed_free; |
| } |
| |
| keypad->irq = platform_get_irq(pdev, 0); |
| if (!keypad->irq) { |
| err = -ENXIO; |
| goto failed_free; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| err = -ENXIO; |
| goto failed_free; |
| } |
| |
| res = request_mem_region(res->start, resource_size(res), pdev->name); |
| if (!res) { |
| err = -EBUSY; |
| goto failed_free; |
| } |
| |
| keypad->mmio_base = ioremap(res->start, resource_size(res)); |
| if (keypad->mmio_base == NULL) { |
| err = -ENXIO; |
| goto failed_free_mem; |
| } |
| |
| err = ep93xx_keypad_acquire_gpio(pdev); |
| if (err) |
| goto failed_free_io; |
| |
| keypad->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(keypad->clk)) { |
| err = PTR_ERR(keypad->clk); |
| goto failed_free_gpio; |
| } |
| |
| input_dev = input_allocate_device(); |
| if (!input_dev) { |
| err = -ENOMEM; |
| goto failed_put_clk; |
| } |
| |
| keypad->input_dev = input_dev; |
| |
| input_dev->name = pdev->name; |
| input_dev->id.bustype = BUS_HOST; |
| input_dev->open = ep93xx_keypad_open; |
| input_dev->close = ep93xx_keypad_close; |
| input_dev->dev.parent = &pdev->dev; |
| input_dev->keycode = keypad->matrix_keycodes; |
| input_dev->keycodesize = sizeof(keypad->matrix_keycodes[0]); |
| input_dev->keycodemax = ARRAY_SIZE(keypad->matrix_keycodes); |
| |
| input_set_drvdata(input_dev, keypad); |
| |
| input_dev->evbit[0] = BIT_MASK(EV_KEY); |
| if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT) |
| input_dev->evbit[0] |= BIT_MASK(EV_REP); |
| |
| ep93xx_keypad_build_keycode(keypad); |
| platform_set_drvdata(pdev, keypad); |
| |
| err = request_irq(keypad->irq, ep93xx_keypad_irq_handler, |
| IRQF_DISABLED, pdev->name, keypad); |
| if (err) |
| goto failed_free_dev; |
| |
| err = input_register_device(input_dev); |
| if (err) |
| goto failed_free_irq; |
| |
| device_init_wakeup(&pdev->dev, 1); |
| |
| return 0; |
| |
| failed_free_irq: |
| free_irq(keypad->irq, pdev); |
| platform_set_drvdata(pdev, NULL); |
| failed_free_dev: |
| input_free_device(input_dev); |
| failed_put_clk: |
| clk_put(keypad->clk); |
| failed_free_gpio: |
| ep93xx_keypad_release_gpio(pdev); |
| failed_free_io: |
| iounmap(keypad->mmio_base); |
| failed_free_mem: |
| release_mem_region(res->start, resource_size(res)); |
| failed_free: |
| kfree(keypad); |
| return err; |
| } |
| |
| static int __devexit ep93xx_keypad_remove(struct platform_device *pdev) |
| { |
| struct ep93xx_keypad *keypad = platform_get_drvdata(pdev); |
| struct resource *res; |
| |
| free_irq(keypad->irq, pdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| if (keypad->enabled) |
| clk_disable(keypad->clk); |
| clk_put(keypad->clk); |
| |
| input_unregister_device(keypad->input_dev); |
| |
| ep93xx_keypad_release_gpio(pdev); |
| |
| iounmap(keypad->mmio_base); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| release_mem_region(res->start, resource_size(res)); |
| |
| kfree(keypad); |
| |
| return 0; |
| } |
| |
| static struct platform_driver ep93xx_keypad_driver = { |
| .driver = { |
| .name = "ep93xx-keypad", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ep93xx_keypad_probe, |
| .remove = __devexit_p(ep93xx_keypad_remove), |
| .suspend = ep93xx_keypad_suspend, |
| .resume = ep93xx_keypad_resume, |
| }; |
| |
| static int __init ep93xx_keypad_init(void) |
| { |
| return platform_driver_register(&ep93xx_keypad_driver); |
| } |
| |
| static void __exit ep93xx_keypad_exit(void) |
| { |
| platform_driver_unregister(&ep93xx_keypad_driver); |
| } |
| |
| module_init(ep93xx_keypad_init); |
| module_exit(ep93xx_keypad_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); |
| MODULE_DESCRIPTION("EP93xx Matrix Keypad Controller"); |
| MODULE_ALIAS("platform:ep93xx-keypad"); |