arch/powerpc/include/asm/epapr_hcalls.h - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * ePAPR hcall interface
  *
  * Copyright 2008-2011 Freescale Semiconductor, Inc.
  *
  * Author: Timur Tabi <timur@freescale.com>
  *
  * This file is provided under a dual BSD/GPL license.  When using or
  * redistributing this file, you may do so under either license.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 /* A "hypercall" is an "sc 1" instruction.  This header file file provides C
  * wrapper functions for the ePAPR hypervisor interface.  It is inteded
  * for use by Linux device drivers and other operating systems.
  *
  * The hypercalls are implemented as inline assembly, rather than assembly
  * language functions in a .S file, for optimization.  It allows
  * the caller to issue the hypercall instruction directly, improving both
  * performance and memory footprint.
  */

 #ifndef _EPAPR_HCALLS_H
 #define _EPAPR_HCALLS_H

 #include <uapi/asm/epapr_hcalls.h>

 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <asm/byteorder.h>

 /*
  * Hypercall register clobber list
  *
  * These macros are used to define the list of clobbered registers during a
  * hypercall.  Technically, registers r0 and r3-r12 are always clobbered,
  * but the gcc inline assembly syntax does not allow us to specify registers
  * on the clobber list that are also on the input/output list.  Therefore,
  * the lists of clobbered registers depends on the number of register
  * parmeters ("+r" and "=r") passed to the hypercall.
  *
  * Each assembly block should use one of the HCALL_CLOBBERSx macros.  As a
  * general rule, 'x' is the number of parameters passed to the assembly
  * block *except* for r11.
  *
  * If you're not sure, just use the smallest value of 'x' that does not
  * generate a compilation error.  Because these are static inline functions,
  * the compiler will only check the clobber list for a function if you
  * compile code that calls that function.
  *
  * r3 and r11 are not included in any clobbers list because they are always
  * listed as output registers.
  *
  * XER, CTR, and LR are currently listed as clobbers because it's uncertain
  * whether they will be clobbered.
  *
  * Note that r11 can be used as an output parameter.
  *
  * The "memory" clobber is only necessary for hcalls where the Hypervisor
  * will read or write guest memory. However, we add it to all hcalls because
  * the impact is minimal, and we want to ensure that it's present for the
  * hcalls that need it.
 */

 /* List of common clobbered registers.  Do not use this macro. */
 #define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory"

 #define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS
 #define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10"
 #define EV_HCALL_CLOBBERS6 EV_HCALL_CLOBBERS7, "r9"
 #define EV_HCALL_CLOBBERS5 EV_HCALL_CLOBBERS6, "r8"
 #define EV_HCALL_CLOBBERS4 EV_HCALL_CLOBBERS5, "r7"
 #define EV_HCALL_CLOBBERS3 EV_HCALL_CLOBBERS4, "r6"
 #define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5"
 #define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4"

 extern bool epapr_paravirt_enabled;
 extern u32 epapr_hypercall_start[];

 #ifdef CONFIG_EPAPR_PARAVIRT
 int __init epapr_paravirt_early_init(void);
 #else
 static inline int epapr_paravirt_early_init(void) { return 0; }
 #endif

 /*
  * We use "uintptr_t" to define a register because it's guaranteed to be a
  * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit
  * platform.
  *
  * All registers are either input/output or output only.  Registers that are
  * initialized before making the hypercall are input/output.  All
  * input/output registers are represented with "+r".  Output-only registers
  * are represented with "=r".  Do not specify any unused registers.  The
  * clobber list will tell the compiler that the hypercall modifies those
  * registers, which is good enough.
  */

 /**
  * ev_int_set_config - configure the specified interrupt
  * @interrupt: the interrupt number
  * @config: configuration for this interrupt
  * @priority: interrupt priority
  * @destination: destination CPU number
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_int_set_config(unsigned int interrupt,
 	uint32_t config, unsigned int priority, uint32_t destination)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");
 	register uintptr_t r4 __asm__("r4");
 	register uintptr_t r5 __asm__("r5");
 	register uintptr_t r6 __asm__("r6");

 	r11 = EV_HCALL_TOKEN(EV_INT_SET_CONFIG);
 	r3  = interrupt;
 	r4  = config;
 	r5  = priority;
 	r6  = destination;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6)
 		: : EV_HCALL_CLOBBERS4
 	);

 	return r3;
 }

 /**
  * ev_int_get_config - return the config of the specified interrupt
  * @interrupt: the interrupt number
  * @config: returned configuration for this interrupt
  * @priority: returned interrupt priority
  * @destination: returned destination CPU number
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_int_get_config(unsigned int interrupt,
 	uint32_t *config, unsigned int *priority, uint32_t *destination)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");
 	register uintptr_t r4 __asm__("r4");
 	register uintptr_t r5 __asm__("r5");
 	register uintptr_t r6 __asm__("r6");

 	r11 = EV_HCALL_TOKEN(EV_INT_GET_CONFIG);
 	r3 = interrupt;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5), "=r" (r6)
 		: : EV_HCALL_CLOBBERS4
 	);

 	*config = r4;
 	*priority = r5;
 	*destination = r6;

 	return r3;
 }

 /**
  * ev_int_set_mask - sets the mask for the specified interrupt source
  * @interrupt: the interrupt number
  * @mask: 0=enable interrupts, 1=disable interrupts
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_int_set_mask(unsigned int interrupt,
 	unsigned int mask)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");
 	register uintptr_t r4 __asm__("r4");

 	r11 = EV_HCALL_TOKEN(EV_INT_SET_MASK);
 	r3 = interrupt;
 	r4 = mask;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3), "+r" (r4)
 		: : EV_HCALL_CLOBBERS2
 	);

 	return r3;
 }

 /**
  * ev_int_get_mask - returns the mask for the specified interrupt source
  * @interrupt: the interrupt number
  * @mask: returned mask for this interrupt (0=enabled, 1=disabled)
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_int_get_mask(unsigned int interrupt,
 	unsigned int *mask)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");
 	register uintptr_t r4 __asm__("r4");

 	r11 = EV_HCALL_TOKEN(EV_INT_GET_MASK);
 	r3 = interrupt;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3), "=r" (r4)
 		: : EV_HCALL_CLOBBERS2
 	);

 	*mask = r4;

 	return r3;
 }

 /**
  * ev_int_eoi - signal the end of interrupt processing
  * @interrupt: the interrupt number
  *
  * This function signals the end of processing for the the specified
  * interrupt, which must be the interrupt currently in service. By
  * definition, this is also the highest-priority interrupt.
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_int_eoi(unsigned int interrupt)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");

 	r11 = EV_HCALL_TOKEN(EV_INT_EOI);
 	r3 = interrupt;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3)
 		: : EV_HCALL_CLOBBERS1
 	);

 	return r3;
 }

 /**
  * ev_byte_channel_send - send characters to a byte stream
  * @handle: byte stream handle
  * @count: (input) num of chars to send, (output) num chars sent
  * @buffer: pointer to a 16-byte buffer
  *
  * @buffer must be at least 16 bytes long, because all 16 bytes will be
  * read from memory into registers, even if count < 16.
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_byte_channel_send(unsigned int handle,
 	unsigned int *count, const char buffer[EV_BYTE_CHANNEL_MAX_BYTES])
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");
 	register uintptr_t r4 __asm__("r4");
 	register uintptr_t r5 __asm__("r5");
 	register uintptr_t r6 __asm__("r6");
 	register uintptr_t r7 __asm__("r7");
 	register uintptr_t r8 __asm__("r8");
 	const uint32_t *p = (const uint32_t *) buffer;

 	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_SEND);
 	r3 = handle;
 	r4 = *count;
 	r5 = be32_to_cpu(p[0]);
 	r6 = be32_to_cpu(p[1]);
 	r7 = be32_to_cpu(p[2]);
 	r8 = be32_to_cpu(p[3]);

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3),
 		  "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), "+r" (r8)
 		: : EV_HCALL_CLOBBERS6
 	);

 	*count = r4;

 	return r3;
 }

 /**
  * ev_byte_channel_receive - fetch characters from a byte channel
  * @handle: byte channel handle
  * @count: (input) max num of chars to receive, (output) num chars received
  * @buffer: pointer to a 16-byte buffer
  *
  * The size of @buffer must be at least 16 bytes, even if you request fewer
  * than 16 characters, because we always write 16 bytes to @buffer.  This is
  * for performance reasons.
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_byte_channel_receive(unsigned int handle,
 	unsigned int *count, char buffer[EV_BYTE_CHANNEL_MAX_BYTES])
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");
 	register uintptr_t r4 __asm__("r4");
 	register uintptr_t r5 __asm__("r5");
 	register uintptr_t r6 __asm__("r6");
 	register uintptr_t r7 __asm__("r7");
 	register uintptr_t r8 __asm__("r8");
 	uint32_t *p = (uint32_t *) buffer;

 	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_RECEIVE);
 	r3 = handle;
 	r4 = *count;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3), "+r" (r4),
 		  "=r" (r5), "=r" (r6), "=r" (r7), "=r" (r8)
 		: : EV_HCALL_CLOBBERS6
 	);

 	*count = r4;
 	p[0] = cpu_to_be32(r5);
 	p[1] = cpu_to_be32(r6);
 	p[2] = cpu_to_be32(r7);
 	p[3] = cpu_to_be32(r8);

 	return r3;
 }

 /**
  * ev_byte_channel_poll - returns the status of the byte channel buffers
  * @handle: byte channel handle
  * @rx_count: returned count of bytes in receive queue
  * @tx_count: returned count of free space in transmit queue
  *
  * This function reports the amount of data in the receive queue (i.e. the
  * number of bytes you can read), and the amount of free space in the transmit
  * queue (i.e. the number of bytes you can write).
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_byte_channel_poll(unsigned int handle,
 	unsigned int *rx_count,	unsigned int *tx_count)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");
 	register uintptr_t r4 __asm__("r4");
 	register uintptr_t r5 __asm__("r5");

 	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_POLL);
 	r3 = handle;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5)
 		: : EV_HCALL_CLOBBERS3
 	);

 	*rx_count = r4;
 	*tx_count = r5;

 	return r3;
 }

 /**
  * ev_int_iack - acknowledge an interrupt
  * @handle: handle to the target interrupt controller
  * @vector: returned interrupt vector
  *
  * If handle is zero, the function returns the next interrupt source
  * number to be handled irrespective of the hierarchy or cascading
  * of interrupt controllers. If non-zero, specifies a handle to the
  * interrupt controller that is the target of the acknowledge.
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_int_iack(unsigned int handle,
 	unsigned int *vector)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");
 	register uintptr_t r4 __asm__("r4");

 	r11 = EV_HCALL_TOKEN(EV_INT_IACK);
 	r3 = handle;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3), "=r" (r4)
 		: : EV_HCALL_CLOBBERS2
 	);

 	*vector = r4;

 	return r3;
 }

 /**
  * ev_doorbell_send - send a doorbell to another partition
  * @handle: doorbell send handle
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_doorbell_send(unsigned int handle)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");

 	r11 = EV_HCALL_TOKEN(EV_DOORBELL_SEND);
 	r3 = handle;

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "+r" (r3)
 		: : EV_HCALL_CLOBBERS1
 	);

 	return r3;
 }

 /**
  * ev_idle -- wait for next interrupt on this core
  *
  * Returns 0 for success, or an error code.
  */
 static inline unsigned int ev_idle(void)
 {
 	register uintptr_t r11 __asm__("r11");
 	register uintptr_t r3 __asm__("r3");

 	r11 = EV_HCALL_TOKEN(EV_IDLE);

 	asm volatile("bl	epapr_hypercall_start"
 		: "+r" (r11), "=r" (r3)
 		: : EV_HCALL_CLOBBERS1
 	);

 	return r3;
 }

 #ifdef CONFIG_EPAPR_PARAVIRT
 static inline unsigned long epapr_hypercall(unsigned long *in,
 			    unsigned long *out,
 			    unsigned long nr)
 {
 	unsigned long register r0 asm("r0");
 	unsigned long register r3 asm("r3") = in[0];
 	unsigned long register r4 asm("r4") = in[1];
 	unsigned long register r5 asm("r5") = in[2];
 	unsigned long register r6 asm("r6") = in[3];
 	unsigned long register r7 asm("r7") = in[4];
 	unsigned long register r8 asm("r8") = in[5];
 	unsigned long register r9 asm("r9") = in[6];
 	unsigned long register r10 asm("r10") = in[7];
 	unsigned long register r11 asm("r11") = nr;
 	unsigned long register r12 asm("r12");

 	asm volatile("bl	epapr_hypercall_start"
 		     : "=r"(r0), "=r"(r3), "=r"(r4), "=r"(r5), "=r"(r6),
 		       "=r"(r7), "=r"(r8), "=r"(r9), "=r"(r10), "=r"(r11),
 		       "=r"(r12)
 		     : "r"(r3), "r"(r4), "r"(r5), "r"(r6), "r"(r7), "r"(r8),
 		       "r"(r9), "r"(r10), "r"(r11)
 		     : "memory", "cc", "xer", "ctr", "lr");

 	out[0] = r4;
 	out[1] = r5;
 	out[2] = r6;
 	out[3] = r7;
 	out[4] = r8;
 	out[5] = r9;
 	out[6] = r10;
 	out[7] = r11;

 	return r3;
 }
 #else
 static unsigned long epapr_hypercall(unsigned long *in,
 				   unsigned long *out,
 				   unsigned long nr)
 {
 	return EV_UNIMPLEMENTED;
 }
 #endif

 static inline long epapr_hypercall0_1(unsigned int nr, unsigned long *r2)
 {
 	unsigned long in[8] = {0};
 	unsigned long out[8];
 	unsigned long r;

 	r = epapr_hypercall(in, out, nr);
 	*r2 = out[0];

 	return r;
 }

 static inline long epapr_hypercall0(unsigned int nr)
 {
 	unsigned long in[8] = {0};
 	unsigned long out[8];

 	return epapr_hypercall(in, out, nr);
 }

 static inline long epapr_hypercall1(unsigned int nr, unsigned long p1)
 {
 	unsigned long in[8] = {0};
 	unsigned long out[8];

 	in[0] = p1;
 	return epapr_hypercall(in, out, nr);
 }

 static inline long epapr_hypercall2(unsigned int nr, unsigned long p1,
 				    unsigned long p2)
 {
 	unsigned long in[8] = {0};
 	unsigned long out[8];

 	in[0] = p1;
 	in[1] = p2;
 	return epapr_hypercall(in, out, nr);
 }

 static inline long epapr_hypercall3(unsigned int nr, unsigned long p1,
 				    unsigned long p2, unsigned long p3)
 {
 	unsigned long in[8] = {0};
 	unsigned long out[8];

 	in[0] = p1;
 	in[1] = p2;
 	in[2] = p3;
 	return epapr_hypercall(in, out, nr);
 }

 static inline long epapr_hypercall4(unsigned int nr, unsigned long p1,
 				    unsigned long p2, unsigned long p3,
 				    unsigned long p4)
 {
 	unsigned long in[8] = {0};
 	unsigned long out[8];

 	in[0] = p1;
 	in[1] = p2;
 	in[2] = p3;
 	in[3] = p4;
 	return epapr_hypercall(in, out, nr);
 }
 #endif /* !__ASSEMBLY__ */
 #endif /* _EPAPR_HCALLS_H */
	/*
	* ePAPR hcall interface
	*
	* Copyright 2008-2011 Freescale Semiconductor, Inc.
	*
	* Author: Timur Tabi <timur@freescale.com>
	*
	* This file is provided under a dual BSD/GPL license. When using or
	* redistributing this file, you may do so under either license.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/* A "hypercall" is an "sc 1" instruction. This header file file provides C
	* wrapper functions for the ePAPR hypervisor interface. It is inteded
	* for use by Linux device drivers and other operating systems.
	*
	* The hypercalls are implemented as inline assembly, rather than assembly
	* language functions in a .S file, for optimization. It allows
	* the caller to issue the hypercall instruction directly, improving both
	* performance and memory footprint.
	*/

	#ifndef _EPAPR_HCALLS_H
	#define _EPAPR_HCALLS_H

	#include <uapi/asm/epapr_hcalls.h>

	#ifndef __ASSEMBLY__
	#include <linux/types.h>
	#include <linux/errno.h>
	#include <asm/byteorder.h>

	/*
	* Hypercall register clobber list
	*
	* These macros are used to define the list of clobbered registers during a
	* hypercall. Technically, registers r0 and r3-r12 are always clobbered,
	* but the gcc inline assembly syntax does not allow us to specify registers
	* on the clobber list that are also on the input/output list. Therefore,
	* the lists of clobbered registers depends on the number of register
	* parmeters ("+r" and "=r") passed to the hypercall.
	*
	* Each assembly block should use one of the HCALL_CLOBBERSx macros. As a
	* general rule, 'x' is the number of parameters passed to the assembly
	* block except for r11.
	*
	* If you're not sure, just use the smallest value of 'x' that does not
	* generate a compilation error. Because these are static inline functions,
	* the compiler will only check the clobber list for a function if you
	* compile code that calls that function.
	*
	* r3 and r11 are not included in any clobbers list because they are always
	* listed as output registers.
	*
	* XER, CTR, and LR are currently listed as clobbers because it's uncertain
	* whether they will be clobbered.
	*
	* Note that r11 can be used as an output parameter.
	*
	* The "memory" clobber is only necessary for hcalls where the Hypervisor
	* will read or write guest memory. However, we add it to all hcalls because
	* the impact is minimal, and we want to ensure that it's present for the
	* hcalls that need it.
	*/

	/* List of common clobbered registers. Do not use this macro. */
	#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory"

	#define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS
	#define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10"
	#define EV_HCALL_CLOBBERS6 EV_HCALL_CLOBBERS7, "r9"
	#define EV_HCALL_CLOBBERS5 EV_HCALL_CLOBBERS6, "r8"
	#define EV_HCALL_CLOBBERS4 EV_HCALL_CLOBBERS5, "r7"
	#define EV_HCALL_CLOBBERS3 EV_HCALL_CLOBBERS4, "r6"
	#define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5"
	#define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4"

	extern bool epapr_paravirt_enabled;
	extern u32 epapr_hypercall_start[];

	#ifdef CONFIG_EPAPR_PARAVIRT
	int __init epapr_paravirt_early_init(void);
	#else
	static inline int epapr_paravirt_early_init(void) { return 0; }
	#endif

	/*
	* We use "uintptr_t" to define a register because it's guaranteed to be a
	* 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit
	* platform.
	*
	* All registers are either input/output or output only. Registers that are
	* initialized before making the hypercall are input/output. All
	* input/output registers are represented with "+r". Output-only registers
	* are represented with "=r". Do not specify any unused registers. The
	* clobber list will tell the compiler that the hypercall modifies those
	* registers, which is good enough.
	*/

	/**
	* ev_int_set_config - configure the specified interrupt
	* @interrupt: the interrupt number
	* @config: configuration for this interrupt
	* @priority: interrupt priority
	* @destination: destination CPU number
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_int_set_config(unsigned int interrupt,
	uint32_t config, unsigned int priority, uint32_t destination)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");
	register uintptr_t r4 __asm__("r4");
	register uintptr_t r5 __asm__("r5");
	register uintptr_t r6 __asm__("r6");

	r11 = EV_HCALL_TOKEN(EV_INT_SET_CONFIG);
	r3 = interrupt;
	r4 = config;
	r5 = priority;
	r6 = destination;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6)
	: : EV_HCALL_CLOBBERS4
	);

	return r3;
	}

	/**
	* ev_int_get_config - return the config of the specified interrupt
	* @interrupt: the interrupt number
	* @config: returned configuration for this interrupt
	* @priority: returned interrupt priority
	* @destination: returned destination CPU number
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_int_get_config(unsigned int interrupt,
	uint32_t config, unsigned int priority, uint32_t *destination)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");
	register uintptr_t r4 __asm__("r4");
	register uintptr_t r5 __asm__("r5");
	register uintptr_t r6 __asm__("r6");

	r11 = EV_HCALL_TOKEN(EV_INT_GET_CONFIG);
	r3 = interrupt;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5), "=r" (r6)
	: : EV_HCALL_CLOBBERS4
	);

	*config = r4;
	*priority = r5;
	*destination = r6;

	return r3;
	}

	/**
	* ev_int_set_mask - sets the mask for the specified interrupt source
	* @interrupt: the interrupt number
	* @mask: 0=enable interrupts, 1=disable interrupts
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_int_set_mask(unsigned int interrupt,
	unsigned int mask)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");
	register uintptr_t r4 __asm__("r4");

	r11 = EV_HCALL_TOKEN(EV_INT_SET_MASK);
	r3 = interrupt;
	r4 = mask;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3), "+r" (r4)
	: : EV_HCALL_CLOBBERS2
	);

	return r3;
	}

	/**
	* ev_int_get_mask - returns the mask for the specified interrupt source
	* @interrupt: the interrupt number
	* @mask: returned mask for this interrupt (0=enabled, 1=disabled)
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_int_get_mask(unsigned int interrupt,
	unsigned int *mask)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");
	register uintptr_t r4 __asm__("r4");

	r11 = EV_HCALL_TOKEN(EV_INT_GET_MASK);
	r3 = interrupt;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3), "=r" (r4)
	: : EV_HCALL_CLOBBERS2
	);

	*mask = r4;

	return r3;
	}

	/**
	* ev_int_eoi - signal the end of interrupt processing
	* @interrupt: the interrupt number
	*
	* This function signals the end of processing for the the specified
	* interrupt, which must be the interrupt currently in service. By
	* definition, this is also the highest-priority interrupt.
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_int_eoi(unsigned int interrupt)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");

	r11 = EV_HCALL_TOKEN(EV_INT_EOI);
	r3 = interrupt;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3)
	: : EV_HCALL_CLOBBERS1
	);

	return r3;
	}

	/**
	* ev_byte_channel_send - send characters to a byte stream
	* @handle: byte stream handle
	* @count: (input) num of chars to send, (output) num chars sent
	* @buffer: pointer to a 16-byte buffer
	*
	* @buffer must be at least 16 bytes long, because all 16 bytes will be
	* read from memory into registers, even if count < 16.
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_byte_channel_send(unsigned int handle,
	unsigned int *count, const char buffer[EV_BYTE_CHANNEL_MAX_BYTES])
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");
	register uintptr_t r4 __asm__("r4");
	register uintptr_t r5 __asm__("r5");
	register uintptr_t r6 __asm__("r6");
	register uintptr_t r7 __asm__("r7");
	register uintptr_t r8 __asm__("r8");
	const uint32_t p = (const uint32_t ) buffer;

	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_SEND);
	r3 = handle;
	r4 = *count;
	r5 = be32_to_cpu(p[0]);
	r6 = be32_to_cpu(p[1]);
	r7 = be32_to_cpu(p[2]);
	r8 = be32_to_cpu(p[3]);

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3),
	"+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), "+r" (r8)
	: : EV_HCALL_CLOBBERS6
	);

	*count = r4;

	return r3;
	}

	/**
	* ev_byte_channel_receive - fetch characters from a byte channel
	* @handle: byte channel handle
	* @count: (input) max num of chars to receive, (output) num chars received
	* @buffer: pointer to a 16-byte buffer
	*
	* The size of @buffer must be at least 16 bytes, even if you request fewer
	* than 16 characters, because we always write 16 bytes to @buffer. This is
	* for performance reasons.
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_byte_channel_receive(unsigned int handle,
	unsigned int *count, char buffer[EV_BYTE_CHANNEL_MAX_BYTES])
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");
	register uintptr_t r4 __asm__("r4");
	register uintptr_t r5 __asm__("r5");
	register uintptr_t r6 __asm__("r6");
	register uintptr_t r7 __asm__("r7");
	register uintptr_t r8 __asm__("r8");
	uint32_t p = (uint32_t ) buffer;

	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_RECEIVE);
	r3 = handle;
	r4 = *count;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3), "+r" (r4),
	"=r" (r5), "=r" (r6), "=r" (r7), "=r" (r8)
	: : EV_HCALL_CLOBBERS6
	);

	*count = r4;
	p[0] = cpu_to_be32(r5);
	p[1] = cpu_to_be32(r6);
	p[2] = cpu_to_be32(r7);
	p[3] = cpu_to_be32(r8);

	return r3;
	}

	/**
	* ev_byte_channel_poll - returns the status of the byte channel buffers
	* @handle: byte channel handle
	* @rx_count: returned count of bytes in receive queue
	* @tx_count: returned count of free space in transmit queue
	*
	* This function reports the amount of data in the receive queue (i.e. the
	* number of bytes you can read), and the amount of free space in the transmit
	* queue (i.e. the number of bytes you can write).
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_byte_channel_poll(unsigned int handle,
	unsigned int rx_count, unsigned int tx_count)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");
	register uintptr_t r4 __asm__("r4");
	register uintptr_t r5 __asm__("r5");

	r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_POLL);
	r3 = handle;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5)
	: : EV_HCALL_CLOBBERS3
	);

	*rx_count = r4;
	*tx_count = r5;

	return r3;
	}

	/**
	* ev_int_iack - acknowledge an interrupt
	* @handle: handle to the target interrupt controller
	* @vector: returned interrupt vector
	*
	* If handle is zero, the function returns the next interrupt source
	* number to be handled irrespective of the hierarchy or cascading
	* of interrupt controllers. If non-zero, specifies a handle to the
	* interrupt controller that is the target of the acknowledge.
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_int_iack(unsigned int handle,
	unsigned int *vector)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");
	register uintptr_t r4 __asm__("r4");

	r11 = EV_HCALL_TOKEN(EV_INT_IACK);
	r3 = handle;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3), "=r" (r4)
	: : EV_HCALL_CLOBBERS2
	);

	*vector = r4;

	return r3;
	}

	/**
	* ev_doorbell_send - send a doorbell to another partition
	* @handle: doorbell send handle
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_doorbell_send(unsigned int handle)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");

	r11 = EV_HCALL_TOKEN(EV_DOORBELL_SEND);
	r3 = handle;

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "+r" (r3)
	: : EV_HCALL_CLOBBERS1
	);

	return r3;
	}

	/**
	* ev_idle -- wait for next interrupt on this core
	*
	* Returns 0 for success, or an error code.
	*/
	static inline unsigned int ev_idle(void)
	{
	register uintptr_t r11 __asm__("r11");
	register uintptr_t r3 __asm__("r3");

	r11 = EV_HCALL_TOKEN(EV_IDLE);

	asm volatile("bl epapr_hypercall_start"
	: "+r" (r11), "=r" (r3)
	: : EV_HCALL_CLOBBERS1
	);

	return r3;
	}

	#ifdef CONFIG_EPAPR_PARAVIRT
	static inline unsigned long epapr_hypercall(unsigned long *in,
	unsigned long *out,
	unsigned long nr)
	{
	unsigned long register r0 asm("r0");
	unsigned long register r3 asm("r3") = in[0];
	unsigned long register r4 asm("r4") = in[1];
	unsigned long register r5 asm("r5") = in[2];
	unsigned long register r6 asm("r6") = in[3];
	unsigned long register r7 asm("r7") = in[4];
	unsigned long register r8 asm("r8") = in[5];
	unsigned long register r9 asm("r9") = in[6];
	unsigned long register r10 asm("r10") = in[7];
	unsigned long register r11 asm("r11") = nr;
	unsigned long register r12 asm("r12");

	asm volatile("bl epapr_hypercall_start"
	: "=r"(r0), "=r"(r3), "=r"(r4), "=r"(r5), "=r"(r6),
	"=r"(r7), "=r"(r8), "=r"(r9), "=r"(r10), "=r"(r11),
	"=r"(r12)
	: "r"(r3), "r"(r4), "r"(r5), "r"(r6), "r"(r7), "r"(r8),
	"r"(r9), "r"(r10), "r"(r11)
	: "memory", "cc", "xer", "ctr", "lr");

	out[0] = r4;
	out[1] = r5;
	out[2] = r6;
	out[3] = r7;
	out[4] = r8;
	out[5] = r9;
	out[6] = r10;
	out[7] = r11;

	return r3;
	}
	#else
	static unsigned long epapr_hypercall(unsigned long *in,
	unsigned long *out,
	unsigned long nr)
	{
	return EV_UNIMPLEMENTED;
	}
	#endif

	static inline long epapr_hypercall0_1(unsigned int nr, unsigned long *r2)
	{
	unsigned long in[8] = {0};
	unsigned long out[8];
	unsigned long r;

	r = epapr_hypercall(in, out, nr);
	*r2 = out[0];

	return r;
	}

	static inline long epapr_hypercall0(unsigned int nr)
	{
	unsigned long in[8] = {0};
	unsigned long out[8];

	return epapr_hypercall(in, out, nr);
	}

	static inline long epapr_hypercall1(unsigned int nr, unsigned long p1)
	{
	unsigned long in[8] = {0};
	unsigned long out[8];

	in[0] = p1;
	return epapr_hypercall(in, out, nr);
	}

	static inline long epapr_hypercall2(unsigned int nr, unsigned long p1,
	unsigned long p2)
	{
	unsigned long in[8] = {0};
	unsigned long out[8];

	in[0] = p1;
	in[1] = p2;
	return epapr_hypercall(in, out, nr);
	}

	static inline long epapr_hypercall3(unsigned int nr, unsigned long p1,
	unsigned long p2, unsigned long p3)
	{
	unsigned long in[8] = {0};
	unsigned long out[8];

	in[0] = p1;
	in[1] = p2;
	in[2] = p3;
	return epapr_hypercall(in, out, nr);
	}

	static inline long epapr_hypercall4(unsigned int nr, unsigned long p1,
	unsigned long p2, unsigned long p3,
	unsigned long p4)
	{
	unsigned long in[8] = {0};
	unsigned long out[8];

	in[0] = p1;
	in[1] = p2;
	in[2] = p3;
	in[3] = p4;
	return epapr_hypercall(in, out, nr);
	}
	#endif /* !__ASSEMBLY__ */
	#endif /* _EPAPR_HCALLS_H */