drivers/net/wireless/Kconfig - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 #
 # Wireless LAN device configuration
 #

 menu "Wireless LAN (non-hamradio)"
 	depends on NETDEVICES

 config NET_RADIO
 	bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
 	---help---
 	  Support for wireless LANs and everything having to do with radio,
 	  but not with amateur radio or FM broadcasting.

 	  Saying Y here also enables the Wireless Extensions (creates
 	  /proc/net/wireless and enables iwconfig access). The Wireless
 	  Extension is a generic API allowing a driver to expose to the user
 	  space configuration and statistics specific to common Wireless LANs.
 	  The beauty of it is that a single set of tool can support all the
 	  variations of Wireless LANs, regardless of their type (as long as
 	  the driver supports Wireless Extension). Another advantage is that
 	  these parameters may be changed on the fly without restarting the
 	  driver (or Linux). If you wish to use Wireless Extensions with
 	  wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
 	  the tools from
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.

 	  Some user-level drivers for scarab devices which don't require
 	  special kernel support are available from
 	  <ftp://shadow.cabi.net/pub/Linux/>.

 # Note : the cards are obsolete (can't buy them anymore), but the drivers
 # are not, as people are still using them...
 comment "Obsolete Wireless cards support (pre-802.11)"
 	depends on NET_RADIO && (INET || ISA || PCMCIA)

 config STRIP
 	tristate "STRIP (Metricom starmode radio IP)"
 	depends on NET_RADIO && INET
 	---help---
 	  Say Y if you have a Metricom radio and intend to use Starmode Radio
 	  IP. STRIP is a radio protocol developed for the MosquitoNet project
 	  (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
 	  traffic using Metricom radios.  Metricom radios are small, battery
 	  powered, 100kbit/sec packet radio transceivers, about the size and
 	  weight of a cellular telephone. (You may also have heard them called
 	  "Metricom modems" but we avoid the term "modem" because it misleads
 	  many people into thinking that you can plug a Metricom modem into a
 	  phone line and use it as a modem.)

 	  You can use STRIP on any Linux machine with a serial port, although
 	  it is obviously most useful for people with laptop computers. If you
 	  think you might get a Metricom radio in the future, there is no harm
 	  in saying Y to STRIP now, except that it makes the kernel a bit
 	  bigger.

 	  To compile this as a module, choose M here: the module will be
 	  called strip.

 config ARLAN
 	tristate "Aironet Arlan 655 & IC2200 DS support"
 	depends on NET_RADIO && ISA && !64BIT
 	---help---
 	  Aironet makes Arlan, a class of wireless LAN adapters. These use the
 	  www.Telxon.com chip, which is also used on several similar cards.
 	  This driver is tested on the 655 and IC2200 series cards. Look at
 	  <http://www.ylenurme.ee/~elmer/655/> for the latest information.

 	  The driver is built as two modules, arlan and arlan-proc. The latter
 	  is the /proc interface and is not needed most of time.

 	  On some computers the card ends up in non-valid state after some
 	  time. Use a ping-reset script to clear it.

 config WAVELAN
 	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
 	depends on NET_RADIO && ISA
 	---help---
 	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
 	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
 	  radio frequencies 900 MHz and 2.4 GHz.

 	  This driver support the ISA version of the WaveLAN card.  A separate
 	  driver for the PCMCIA (PC-card) hardware is available in David
 	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 	  for location).

 	  If you want to use an ISA WaveLAN card under Linux, say Y and read
 	  the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>. Some more specific
 	  information is contained in
 	  <file:Documentation/networking/wavelan.txt> and in the source code
 	  <file:drivers/net/wavelan.p.h>.

 	  You will also need the wireless tools package available from
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 	  Please read the man pages contained therein.

 	  To compile this driver as a module, choose M here: the module will be
 	  called wavelan.

 config PCMCIA_WAVELAN
 	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
 	depends on NET_RADIO && PCMCIA
 	help
 	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
 	  (PC-card) wireless Ethernet networking card to your computer.  This
 	  driver is for the non-IEEE-802.11 Wavelan cards.

 	  To compile this driver as a module, choose M here: the module will be
 	  called wavelan_cs.  If unsure, say N.

 config PCMCIA_NETWAVE
 	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
 	depends on NET_RADIO && PCMCIA
 	help
 	  Say Y here if you intend to attach this type of PCMCIA (PC-card)
 	  wireless Ethernet networking card to your computer.

 	  To compile this driver as a module, choose M here: the module will be
 	  called netwave_cs.  If unsure, say N.

 comment "Wireless 802.11 Frequency Hopping cards support"
 	depends on NET_RADIO && PCMCIA

 config PCMCIA_RAYCS
 	tristate "Aviator/Raytheon 2.4MHz wireless support"
 	depends on NET_RADIO && PCMCIA
 	---help---
 	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
 	  (PC-card) wireless Ethernet networking card to your computer.
 	  Please read the file <file:Documentation/networking/ray_cs.txt> for
 	  details.

 	  To compile this driver as a module, choose M here: the module will be
 	  called ray_cs.  If unsure, say N.

 comment "Wireless 802.11b ISA/PCI cards support"
 	depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)

 config AIRO
 	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
 	depends on NET_RADIO && ISA && (PCI || BROKEN)
 	---help---
 	  This is the standard Linux driver to support Cisco/Aironet ISA and
 	  PCI 802.11 wireless cards.
 	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 	  - with or without encryption) as well as card before the Cisco
 	  aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).

 	  This driver support both the standard Linux Wireless Extensions
 	  and Cisco proprietary API, so both the Linux Wireless Tools and the
 	  Cisco Linux utilities can be used to configure the card.

 	  The driver can be compiled as a module and will be named "airo".

 config HERMES
 	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
 	depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
 	---help---
 	  A driver for 802.11b wireless cards based based on the "Hermes" or
 	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
 	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
 	  - except for the Cisco/Aironet cards.  Cards supported include the
 	  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
 	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
 	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
 	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
 	  PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.

 	  This option includes the guts of the driver, but in order to
 	  actually use a card you will also need to enable support for PCMCIA
 	  Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.

 	  You will also very likely also need the Wireless Tools in order to
 	  configure your card and that /etc/pcmcia/wireless.opts works :
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>

 config APPLE_AIRPORT
 	tristate "Apple Airport support (built-in)"
 	depends on PPC_PMAC && HERMES
 	help
 	  Say Y here to support the Airport 802.11b wireless Ethernet hardware
 	  built into the Macintosh iBook and other recent PowerPC-based
 	  Macintosh machines. This is essentially a Lucent Orinoco card with
 	  a non-standard interface

 config PLX_HERMES
 	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)"
 	depends on PCI && HERMES && EXPERIMENTAL
 	help
 	  Enable support for PCMCIA cards supported by the "Hermes" (aka
 	  orinoco) driver when used in PLX9052 based PCI adaptors.  These
 	  adaptors are not a full PCMCIA controller but act as a more limited
 	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
 	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear
 	  MA301 is such an adaptor.

 	  Support for these adaptors is so far still incomplete and buggy.
 	  You have been warned.

 config TMD_HERMES
 	tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)"
 	depends on PCI && HERMES && EXPERIMENTAL
 	help
 	  Enable support for PCMCIA cards supported by the "Hermes" (aka
 	  orinoco) driver when used in TMD7160 based PCI adaptors.  These
 	  adaptors are not a full PCMCIA controller but act as a more limited
 	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that
 	  802.11b PCMCIA cards can be used in desktop machines.

 	  Support for these adaptors is so far still incomplete and buggy.
 	  You have been warned.

 config PCI_HERMES
 	tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)"
 	depends on PCI && HERMES && EXPERIMENTAL
 	help
 	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on
 	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b
 	  PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
 	  common.  Some of the built-in wireless adaptors in laptops are of
 	  this variety.

 config ATMEL
       tristate "Atmel at76c50x chipset  802.11b support"
       depends on NET_RADIO && EXPERIMENTAL
       select FW_LOADER
       select CRC32
        ---help---
         A driver 802.11b wireless cards based on the Atmel fast-vnet
         chips. This driver supports standard Linux wireless extensions.

         Many  cards based on this chipset do not have flash memory
         and need their firmware loaded at start-up. If yours is
         one of these, you will need to provide a firmware image
         to be loaded into the card by the driver. The Atmel
         firmware package can be downloaded from
         <http://www.thekelleys.org.uk/atmel>

 config PCI_ATMEL
       tristate "Atmel at76c506 PCI cards"
       depends on ATMEL && PCI
        ---help---
         Enable support for PCI and mini-PCI cards containing the
         Atmel at76c506 chip.

 # If Pcmcia is compiled in, offer Pcmcia cards...
 comment "Wireless 802.11b Pcmcia/Cardbus cards support"
 	depends on NET_RADIO && PCMCIA

 config PCMCIA_HERMES
 	tristate "Hermes PCMCIA card support"
 	depends on NET_RADIO && PCMCIA && HERMES
 	---help---
 	  A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
 	  as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
 	  EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
 	  others).  It should also be usable on various Prism II based cards
 	  such as the Linksys, D-Link and Farallon Skyline.  It should also
 	  work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.

 	  To use your PC-cards, you will need supporting software from David
 	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 	  for location).  You also want to check out the PCMCIA-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.

 	  You will also very likely also need the Wireless Tools in order to
 	  configure your card and that /etc/pcmcia/wireless.opts works:
 	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.

 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 	depends on NET_RADIO && PCMCIA
 	---help---
 	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
 	  802.11 wireless cards.  This driver is the same as the Aironet
 	  driver part of the Linux Pcmcia package.
 	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 	  - with or without encryption) as well as card before the Cisco
 	  aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
 	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
 	  802.11b cards.

 	  This driver support both the standard Linux Wireless Extensions
 	  and Cisco proprietary API, so both the Linux Wireless Tools and the
 	  Cisco Linux utilities can be used to configure the card.

 	  To use your PC-cards, you will need supporting software from David
 	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 	  for location).  You also want to check out the PCMCIA-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.

 config PCMCIA_ATMEL
 	tristate "Atmel at76c502/at76c504 PCMCIA cards"
 	depends on NET_RADIO && ATMEL && PCMCIA
 	select FW_LOADER
 	select CRC32
 	---help---
 	  Enable support for PCMCIA cards containing the
 	  Atmel at76c502 and at76c504 chips.

 config PCMCIA_WL3501
       tristate "Planet WL3501 PCMCIA cards"
       depends on NET_RADIO && EXPERIMENTAL && PCMCIA
        ---help---
          A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
 	 It has basic support for Linux wireless extensions and initial
 	 micro support for ethtool.

 comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
 	depends on NET_RADIO && PCI
 config PRISM54
 	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
 	depends on PCI && NET_RADIO && EXPERIMENTAL
 	select FW_LOADER
 	---help---
 	  Enable PCI and Cardbus support for the following chipset based cards:

 	  ISL3880 - Prism GT            802.11 b/g
 	  ISL3877 - Prism Indigo        802.11 a
 	  ISL3890 - Prism Duette        802.11 a/b/g

 	  For a complete list of supported cards visit <http://prism54.org>.
 	  Here is the latest confirmed list of supported cards:

 	  3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
 	  Allnet ALL0271 PCI Card
 	  Compex WL54G Cardbus Card
 	  Corega CG-WLCB54GT Cardbus Card
 	  D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
 	  I-O Data WN-G54/CB Cardbus Card
 	  Kobishi XG-300 aka Z-Com Cardbus Card
 	  Netgear WG511 Cardbus Card
 	  Ovislink WL-5400PCI PCI Card
 	  Peabird WLG-PCI PCI Card
 	  Sitecom WL-100i Cardbus Card
 	  Sitecom WL-110i PCI Card
 	  SMC2802W -    EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
 	  SMC2835W -    EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
 	  SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
 	  Z-Com XG-900 PCI Card
 	  Zyxel G-100 Cardbus Card

 	  If you enable this you will need a firmware file as well.
 	  You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
 	  You can get this non-GPL'd firmware file from the Prism54 project page:
 	  <http://prism54.org>
 	  You will also need the /etc/hotplug/firmware.agent script from
 	  a current hotplug package.

 	  Note: You need a motherboard with DMA support to use any of these cards

 	  If you want to compile the driver as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/modules.txt>.  The module
 	  will be called prism54.ko.

 # yes, this works even when no drivers are selected
 config NET_WIRELESS
 	bool
 	depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
 	default y

 endmenu
	#
	# Wireless LAN device configuration
	#

	menu "Wireless LAN (non-hamradio)"
	depends on NETDEVICES

	config NET_RADIO
	bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
	---help---
	Support for wireless LANs and everything having to do with radio,
	but not with amateur radio or FM broadcasting.

	Saying Y here also enables the Wireless Extensions (creates
	/proc/net/wireless and enables iwconfig access). The Wireless
	Extension is a generic API allowing a driver to expose to the user
	space configuration and statistics specific to common Wireless LANs.
	The beauty of it is that a single set of tool can support all the
	variations of Wireless LANs, regardless of their type (as long as
	the driver supports Wireless Extension). Another advantage is that
	these parameters may be changed on the fly without restarting the
	driver (or Linux). If you wish to use Wireless Extensions with
	wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
	the tools from
	<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.

	Some user-level drivers for scarab devices which don't require
	special kernel support are available from
	<ftp://shadow.cabi.net/pub/Linux/>.

	# Note : the cards are obsolete (can't buy them anymore), but the drivers
	# are not, as people are still using them...
	comment "Obsolete Wireless cards support (pre-802.11)"
	depends on NET_RADIO && (INET \|\| ISA \|\| PCMCIA)

	config STRIP
	tristate "STRIP (Metricom starmode radio IP)"
	depends on NET_RADIO && INET
	---help---
	Say Y if you have a Metricom radio and intend to use Starmode Radio
	IP. STRIP is a radio protocol developed for the MosquitoNet project
	(on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
	traffic using Metricom radios. Metricom radios are small, battery
	powered, 100kbit/sec packet radio transceivers, about the size and
	weight of a cellular telephone. (You may also have heard them called
	"Metricom modems" but we avoid the term "modem" because it misleads
	many people into thinking that you can plug a Metricom modem into a
	phone line and use it as a modem.)

	You can use STRIP on any Linux machine with a serial port, although
	it is obviously most useful for people with laptop computers. If you
	think you might get a Metricom radio in the future, there is no harm
	in saying Y to STRIP now, except that it makes the kernel a bit
	bigger.

	To compile this as a module, choose M here: the module will be
	called strip.

	config ARLAN
	tristate "Aironet Arlan 655 & IC2200 DS support"
	depends on NET_RADIO && ISA && !64BIT
	---help---
	Aironet makes Arlan, a class of wireless LAN adapters. These use the
	www.Telxon.com chip, which is also used on several similar cards.
	This driver is tested on the 655 and IC2200 series cards. Look at
	<http://www.ylenurme.ee/~elmer/655/> for the latest information.

	The driver is built as two modules, arlan and arlan-proc. The latter
	is the /proc interface and is not needed most of time.

	On some computers the card ends up in non-valid state after some
	time. Use a ping-reset script to clear it.

	config WAVELAN
	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
	depends on NET_RADIO && ISA
	---help---
	The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
	a Radio LAN (wireless Ethernet-like Local Area Network) using the
	radio frequencies 900 MHz and 2.4 GHz.

	This driver support the ISA version of the WaveLAN card. A separate
	driver for the PCMCIA (PC-card) hardware is available in David
	Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
	for location).

	If you want to use an ISA WaveLAN card under Linux, say Y and read
	the Ethernet-HOWTO, available from
	<http://www.tldp.org/docs.html#howto>. Some more specific
	information is contained in
	<file:Documentation/networking/wavelan.txt> and in the source code
	<file:drivers/net/wavelan.p.h>.

	You will also need the wireless tools package available from
	<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
	Please read the man pages contained therein.

	To compile this driver as a module, choose M here: the module will be
	called wavelan.

	config PCMCIA_WAVELAN
	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
	depends on NET_RADIO && PCMCIA
	help
	Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
	(PC-card) wireless Ethernet networking card to your computer. This
	driver is for the non-IEEE-802.11 Wavelan cards.

	To compile this driver as a module, choose M here: the module will be
	called wavelan_cs. If unsure, say N.

	config PCMCIA_NETWAVE
	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
	depends on NET_RADIO && PCMCIA
	help
	Say Y here if you intend to attach this type of PCMCIA (PC-card)
	wireless Ethernet networking card to your computer.

	To compile this driver as a module, choose M here: the module will be
	called netwave_cs. If unsure, say N.

	comment "Wireless 802.11 Frequency Hopping cards support"
	depends on NET_RADIO && PCMCIA

	config PCMCIA_RAYCS
	tristate "Aviator/Raytheon 2.4MHz wireless support"
	depends on NET_RADIO && PCMCIA
	---help---
	Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	(PC-card) wireless Ethernet networking card to your computer.
	Please read the file <file:Documentation/networking/ray_cs.txt> for
	details.

	To compile this driver as a module, choose M here: the module will be
	called ray_cs. If unsure, say N.

	comment "Wireless 802.11b ISA/PCI cards support"
	depends on NET_RADIO && (ISA \|\| PCI \|\| PPC_PMAC \|\| PCMCIA)

	config AIRO
	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
	depends on NET_RADIO && ISA && (PCI \|\| BROKEN)
	---help---
	This is the standard Linux driver to support Cisco/Aironet ISA and
	PCI 802.11 wireless cards.
	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	- with or without encryption) as well as card before the Cisco
	aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).

	This driver support both the standard Linux Wireless Extensions
	and Cisco proprietary API, so both the Linux Wireless Tools and the
	Cisco Linux utilities can be used to configure the card.

	The driver can be compiled as a module and will be named "airo".

	config HERMES
	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
	depends on NET_RADIO && (PPC_PMAC \|\| PCI \|\| PCMCIA)
	---help---
	A driver for 802.11b wireless cards based based on the "Hermes" or
	Intersil HFA384x (Prism 2) MAC controller. This includes the vast
	majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
	- except for the Cisco/Aironet cards. Cards supported include the
	Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
	Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
	IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
	MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
	PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.

	This option includes the guts of the driver, but in order to
	actually use a card you will also need to enable support for PCMCIA
	Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.

	You will also very likely also need the Wireless Tools in order to
	configure your card and that /etc/pcmcia/wireless.opts works :
	<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>

	config APPLE_AIRPORT
	tristate "Apple Airport support (built-in)"
	depends on PPC_PMAC && HERMES
	help
	Say Y here to support the Airport 802.11b wireless Ethernet hardware
	built into the Macintosh iBook and other recent PowerPC-based
	Macintosh machines. This is essentially a Lucent Orinoco card with
	a non-standard interface

	config PLX_HERMES
	tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)"
	depends on PCI && HERMES && EXPERIMENTAL
	help
	Enable support for PCMCIA cards supported by the "Hermes" (aka
	orinoco) driver when used in PLX9052 based PCI adaptors. These
	adaptors are not a full PCMCIA controller but act as a more limited
	PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
	802.11b PCMCIA cards can be used in desktop machines. The Netgear
	MA301 is such an adaptor.

	Support for these adaptors is so far still incomplete and buggy.
	You have been warned.

	config TMD_HERMES
	tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)"
	depends on PCI && HERMES && EXPERIMENTAL
	help
	Enable support for PCMCIA cards supported by the "Hermes" (aka
	orinoco) driver when used in TMD7160 based PCI adaptors. These
	adaptors are not a full PCMCIA controller but act as a more limited
	PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
	802.11b PCMCIA cards can be used in desktop machines.

	Support for these adaptors is so far still incomplete and buggy.
	You have been warned.

	config PCI_HERMES
	tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)"
	depends on PCI && HERMES && EXPERIMENTAL
	help
	Enable support for PCI and mini-PCI 802.11b wireless NICs based on
	the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
	PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
	common. Some of the built-in wireless adaptors in laptops are of
	this variety.

	config ATMEL
	tristate "Atmel at76c50x chipset 802.11b support"
	depends on NET_RADIO && EXPERIMENTAL
	select FW_LOADER
	select CRC32
	---help---
	A driver 802.11b wireless cards based on the Atmel fast-vnet
	chips. This driver supports standard Linux wireless extensions.

	Many cards based on this chipset do not have flash memory
	and need their firmware loaded at start-up. If yours is
	one of these, you will need to provide a firmware image
	to be loaded into the card by the driver. The Atmel
	firmware package can be downloaded from
	<http://www.thekelleys.org.uk/atmel>

	config PCI_ATMEL
	tristate "Atmel at76c506 PCI cards"
	depends on ATMEL && PCI
	---help---
	Enable support for PCI and mini-PCI cards containing the
	Atmel at76c506 chip.

	# If Pcmcia is compiled in, offer Pcmcia cards...
	comment "Wireless 802.11b Pcmcia/Cardbus cards support"
	depends on NET_RADIO && PCMCIA

	config PCMCIA_HERMES
	tristate "Hermes PCMCIA card support"
	depends on NET_RADIO && PCMCIA && HERMES
	---help---
	A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
	as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
	EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
	others). It should also be usable on various Prism II based cards
	such as the Linksys, D-Link and Farallon Skyline. It should also
	work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.

	To use your PC-cards, you will need supporting software from David
	Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
	for location). You also want to check out the PCMCIA-HOWTO,
	available from <http://www.tldp.org/docs.html#howto>.

	You will also very likely also need the Wireless Tools in order to
	configure your card and that /etc/pcmcia/wireless.opts works:
	<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.

	config AIRO_CS
	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
	depends on NET_RADIO && PCMCIA
	---help---
	This is the standard Linux driver to support Cisco/Aironet PCMCIA
	802.11 wireless cards. This driver is the same as the Aironet
	driver part of the Linux Pcmcia package.
	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	- with or without encryption) as well as card before the Cisco
	aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
	supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
	802.11b cards.

	This driver support both the standard Linux Wireless Extensions
	and Cisco proprietary API, so both the Linux Wireless Tools and the
	Cisco Linux utilities can be used to configure the card.

	To use your PC-cards, you will need supporting software from David
	Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
	for location). You also want to check out the PCMCIA-HOWTO,
	available from <http://www.tldp.org/docs.html#howto>.

	config PCMCIA_ATMEL
	tristate "Atmel at76c502/at76c504 PCMCIA cards"
	depends on NET_RADIO && ATMEL && PCMCIA
	select FW_LOADER
	select CRC32
	---help---
	Enable support for PCMCIA cards containing the
	Atmel at76c502 and at76c504 chips.

	config PCMCIA_WL3501
	tristate "Planet WL3501 PCMCIA cards"
	depends on NET_RADIO && EXPERIMENTAL && PCMCIA
	---help---
	A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	It has basic support for Linux wireless extensions and initial
	micro support for ethtool.

	comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
	depends on NET_RADIO && PCI
	config PRISM54
	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
	depends on PCI && NET_RADIO && EXPERIMENTAL
	select FW_LOADER
	---help---
	Enable PCI and Cardbus support for the following chipset based cards:

	ISL3880 - Prism GT 802.11 b/g
	ISL3877 - Prism Indigo 802.11 a
	ISL3890 - Prism Duette 802.11 a/b/g

	For a complete list of supported cards visit <http://prism54.org>.
	Here is the latest confirmed list of supported cards:

	3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
	Allnet ALL0271 PCI Card
	Compex WL54G Cardbus Card
	Corega CG-WLCB54GT Cardbus Card
	D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
	I-O Data WN-G54/CB Cardbus Card
	Kobishi XG-300 aka Z-Com Cardbus Card
	Netgear WG511 Cardbus Card
	Ovislink WL-5400PCI PCI Card
	Peabird WLG-PCI PCI Card
	Sitecom WL-100i Cardbus Card
	Sitecom WL-110i PCI Card
	SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
	SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
	SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
	Z-Com XG-900 PCI Card
	Zyxel G-100 Cardbus Card

	If you enable this you will need a firmware file as well.
	You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
	You can get this non-GPL'd firmware file from the Prism54 project page:
	<http://prism54.org>
	You will also need the /etc/hotplug/firmware.agent script from
	a current hotplug package.

	Note: You need a motherboard with DMA support to use any of these cards

	If you want to compile the driver as a module ( = code which can be
	inserted in and removed from the running kernel whenever you want),
	say M here and read <file:Documentation/modules.txt>. The module
	will be called prism54.ko.

	# yes, this works even when no drivers are selected
	config NET_WIRELESS
	bool
	depends on NET_RADIO && (ISA \|\| PCI \|\| PPC_PMAC \|\| PCMCIA)
	default y

	endmenu