| /* |
| * SMBus 2.0 driver for AMD-8111 IO-Hub. |
| * |
| * Copyright (c) 2002 Vojtech Pavlik |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation version 2. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/stddef.h> |
| #include <linux/sched.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <asm/io.h> |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>"); |
| MODULE_DESCRIPTION("AMD8111 SMBus 2.0 driver"); |
| |
| struct amd_smbus { |
| struct pci_dev *dev; |
| struct i2c_adapter adapter; |
| int base; |
| int size; |
| }; |
| |
| /* |
| * AMD PCI control registers definitions. |
| */ |
| |
| #define AMD_PCI_MISC 0x48 |
| |
| #define AMD_PCI_MISC_SCI 0x04 /* deliver SCI */ |
| #define AMD_PCI_MISC_INT 0x02 /* deliver PCI IRQ */ |
| #define AMD_PCI_MISC_SPEEDUP 0x01 /* 16x clock speedup */ |
| |
| /* |
| * ACPI 2.0 chapter 13 PCI interface definitions. |
| */ |
| |
| #define AMD_EC_DATA 0x00 /* data register */ |
| #define AMD_EC_SC 0x04 /* status of controller */ |
| #define AMD_EC_CMD 0x04 /* command register */ |
| #define AMD_EC_ICR 0x08 /* interrupt control register */ |
| |
| #define AMD_EC_SC_SMI 0x04 /* smi event pending */ |
| #define AMD_EC_SC_SCI 0x02 /* sci event pending */ |
| #define AMD_EC_SC_BURST 0x01 /* burst mode enabled */ |
| #define AMD_EC_SC_CMD 0x08 /* byte in data reg is command */ |
| #define AMD_EC_SC_IBF 0x02 /* data ready for embedded controller */ |
| #define AMD_EC_SC_OBF 0x01 /* data ready for host */ |
| |
| #define AMD_EC_CMD_RD 0x80 /* read EC */ |
| #define AMD_EC_CMD_WR 0x81 /* write EC */ |
| #define AMD_EC_CMD_BE 0x82 /* enable burst mode */ |
| #define AMD_EC_CMD_BD 0x83 /* disable burst mode */ |
| #define AMD_EC_CMD_QR 0x84 /* query EC */ |
| |
| /* |
| * ACPI 2.0 chapter 13 access of registers of the EC |
| */ |
| |
| static unsigned int amd_ec_wait_write(struct amd_smbus *smbus) |
| { |
| int timeout = 500; |
| |
| while (timeout-- && (inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF)) |
| udelay(1); |
| |
| if (!timeout) { |
| dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) |
| { |
| int timeout = 500; |
| |
| while (timeout-- && (~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF)) |
| udelay(1); |
| |
| if (!timeout) { |
| dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data) |
| { |
| if (amd_ec_wait_write(smbus)) |
| return -1; |
| outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD); |
| |
| if (amd_ec_wait_write(smbus)) |
| return -1; |
| outb(address, smbus->base + AMD_EC_DATA); |
| |
| if (amd_ec_wait_read(smbus)) |
| return -1; |
| *data = inb(smbus->base + AMD_EC_DATA); |
| |
| return 0; |
| } |
| |
| static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data) |
| { |
| if (amd_ec_wait_write(smbus)) |
| return -1; |
| outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD); |
| |
| if (amd_ec_wait_write(smbus)) |
| return -1; |
| outb(address, smbus->base + AMD_EC_DATA); |
| |
| if (amd_ec_wait_write(smbus)) |
| return -1; |
| outb(data, smbus->base + AMD_EC_DATA); |
| |
| return 0; |
| } |
| |
| /* |
| * ACPI 2.0 chapter 13 SMBus 2.0 EC register model |
| */ |
| |
| #define AMD_SMB_PRTCL 0x00 /* protocol, PEC */ |
| #define AMD_SMB_STS 0x01 /* status */ |
| #define AMD_SMB_ADDR 0x02 /* address */ |
| #define AMD_SMB_CMD 0x03 /* command */ |
| #define AMD_SMB_DATA 0x04 /* 32 data registers */ |
| #define AMD_SMB_BCNT 0x24 /* number of data bytes */ |
| #define AMD_SMB_ALRM_A 0x25 /* alarm address */ |
| #define AMD_SMB_ALRM_D 0x26 /* 2 bytes alarm data */ |
| |
| #define AMD_SMB_STS_DONE 0x80 |
| #define AMD_SMB_STS_ALRM 0x40 |
| #define AMD_SMB_STS_RES 0x20 |
| #define AMD_SMB_STS_STATUS 0x1f |
| |
| #define AMD_SMB_STATUS_OK 0x00 |
| #define AMD_SMB_STATUS_FAIL 0x07 |
| #define AMD_SMB_STATUS_DNAK 0x10 |
| #define AMD_SMB_STATUS_DERR 0x11 |
| #define AMD_SMB_STATUS_CMD_DENY 0x12 |
| #define AMD_SMB_STATUS_UNKNOWN 0x13 |
| #define AMD_SMB_STATUS_ACC_DENY 0x17 |
| #define AMD_SMB_STATUS_TIMEOUT 0x18 |
| #define AMD_SMB_STATUS_NOTSUP 0x19 |
| #define AMD_SMB_STATUS_BUSY 0x1A |
| #define AMD_SMB_STATUS_PEC 0x1F |
| |
| #define AMD_SMB_PRTCL_WRITE 0x00 |
| #define AMD_SMB_PRTCL_READ 0x01 |
| #define AMD_SMB_PRTCL_QUICK 0x02 |
| #define AMD_SMB_PRTCL_BYTE 0x04 |
| #define AMD_SMB_PRTCL_BYTE_DATA 0x06 |
| #define AMD_SMB_PRTCL_WORD_DATA 0x08 |
| #define AMD_SMB_PRTCL_BLOCK_DATA 0x0a |
| #define AMD_SMB_PRTCL_PROC_CALL 0x0c |
| #define AMD_SMB_PRTCL_BLOCK_PROC_CALL 0x0d |
| #define AMD_SMB_PRTCL_I2C_BLOCK_DATA 0x4a |
| #define AMD_SMB_PRTCL_PEC 0x80 |
| |
| |
| static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, |
| char read_write, u8 command, int size, union i2c_smbus_data * data) |
| { |
| struct amd_smbus *smbus = adap->algo_data; |
| unsigned char protocol, len, pec, temp[2]; |
| int i; |
| |
| protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ : AMD_SMB_PRTCL_WRITE; |
| pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0; |
| |
| switch (size) { |
| |
| case I2C_SMBUS_QUICK: |
| protocol |= AMD_SMB_PRTCL_QUICK; |
| read_write = I2C_SMBUS_WRITE; |
| break; |
| |
| case I2C_SMBUS_BYTE: |
| if (read_write == I2C_SMBUS_WRITE) |
| amd_ec_write(smbus, AMD_SMB_CMD, command); |
| protocol |= AMD_SMB_PRTCL_BYTE; |
| break; |
| |
| case I2C_SMBUS_BYTE_DATA: |
| amd_ec_write(smbus, AMD_SMB_CMD, command); |
| if (read_write == I2C_SMBUS_WRITE) |
| amd_ec_write(smbus, AMD_SMB_DATA, data->byte); |
| protocol |= AMD_SMB_PRTCL_BYTE_DATA; |
| break; |
| |
| case I2C_SMBUS_WORD_DATA: |
| amd_ec_write(smbus, AMD_SMB_CMD, command); |
| if (read_write == I2C_SMBUS_WRITE) { |
| amd_ec_write(smbus, AMD_SMB_DATA, data->word); |
| amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); |
| } |
| protocol |= AMD_SMB_PRTCL_WORD_DATA | pec; |
| break; |
| |
| case I2C_SMBUS_BLOCK_DATA: |
| amd_ec_write(smbus, AMD_SMB_CMD, command); |
| if (read_write == I2C_SMBUS_WRITE) { |
| len = min_t(u8, data->block[0], 32); |
| amd_ec_write(smbus, AMD_SMB_BCNT, len); |
| for (i = 0; i < len; i++) |
| amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); |
| } |
| protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec; |
| break; |
| |
| case I2C_SMBUS_I2C_BLOCK_DATA: |
| len = min_t(u8, data->block[0], 32); |
| amd_ec_write(smbus, AMD_SMB_CMD, command); |
| amd_ec_write(smbus, AMD_SMB_BCNT, len); |
| if (read_write == I2C_SMBUS_WRITE) |
| for (i = 0; i < len; i++) |
| amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); |
| protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA; |
| break; |
| |
| case I2C_SMBUS_PROC_CALL: |
| amd_ec_write(smbus, AMD_SMB_CMD, command); |
| amd_ec_write(smbus, AMD_SMB_DATA, data->word); |
| amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); |
| protocol = AMD_SMB_PRTCL_PROC_CALL | pec; |
| read_write = I2C_SMBUS_READ; |
| break; |
| |
| case I2C_SMBUS_BLOCK_PROC_CALL: |
| protocol |= pec; |
| len = min_t(u8, data->block[0], 31); |
| amd_ec_write(smbus, AMD_SMB_CMD, command); |
| amd_ec_write(smbus, AMD_SMB_BCNT, len); |
| for (i = 0; i < len; i++) |
| amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); |
| protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec; |
| read_write = I2C_SMBUS_READ; |
| break; |
| |
| case I2C_SMBUS_WORD_DATA_PEC: |
| case I2C_SMBUS_BLOCK_DATA_PEC: |
| case I2C_SMBUS_PROC_CALL_PEC: |
| case I2C_SMBUS_BLOCK_PROC_CALL_PEC: |
| dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size); |
| return -1; |
| |
| default: |
| dev_warn(&adap->dev, "Unsupported transaction %d\n", size); |
| return -1; |
| } |
| |
| amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1); |
| amd_ec_write(smbus, AMD_SMB_PRTCL, protocol); |
| |
| amd_ec_read(smbus, AMD_SMB_STS, temp + 0); |
| |
| if (~temp[0] & AMD_SMB_STS_DONE) { |
| udelay(500); |
| amd_ec_read(smbus, AMD_SMB_STS, temp + 0); |
| } |
| |
| if (~temp[0] & AMD_SMB_STS_DONE) { |
| msleep(1); |
| amd_ec_read(smbus, AMD_SMB_STS, temp + 0); |
| } |
| |
| if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS)) |
| return -1; |
| |
| if (read_write == I2C_SMBUS_WRITE) |
| return 0; |
| |
| switch (size) { |
| |
| case I2C_SMBUS_BYTE: |
| case I2C_SMBUS_BYTE_DATA: |
| amd_ec_read(smbus, AMD_SMB_DATA, &data->byte); |
| break; |
| |
| case I2C_SMBUS_WORD_DATA: |
| case I2C_SMBUS_PROC_CALL: |
| amd_ec_read(smbus, AMD_SMB_DATA, temp + 0); |
| amd_ec_read(smbus, AMD_SMB_DATA + 1, temp + 1); |
| data->word = (temp[1] << 8) | temp[0]; |
| break; |
| |
| case I2C_SMBUS_BLOCK_DATA: |
| case I2C_SMBUS_BLOCK_PROC_CALL: |
| amd_ec_read(smbus, AMD_SMB_BCNT, &len); |
| len = min_t(u8, len, 32); |
| case I2C_SMBUS_I2C_BLOCK_DATA: |
| for (i = 0; i < len; i++) |
| amd_ec_read(smbus, AMD_SMB_DATA + i, data->block + i + 1); |
| data->block[0] = len; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| |
| static u32 amd8111_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | |
| I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | |
| I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC; |
| } |
| |
| static struct i2c_algorithm smbus_algorithm = { |
| .name = "Non-I2C SMBus 2.0 adapter", |
| .id = I2C_ALGO_SMBUS, |
| .smbus_xfer = amd8111_access, |
| .functionality = amd8111_func, |
| }; |
| |
| |
| static struct pci_device_id amd8111_ids[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) }, |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE (pci, amd8111_ids); |
| |
| static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| struct amd_smbus *smbus; |
| int error = -ENODEV; |
| |
| if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) |
| return -ENODEV; |
| |
| smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL); |
| if (!smbus) |
| return -ENOMEM; |
| memset(smbus, 0, sizeof(struct amd_smbus)); |
| |
| smbus->dev = dev; |
| smbus->base = pci_resource_start(dev, 0); |
| smbus->size = pci_resource_len(dev, 0); |
| |
| if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0")) |
| goto out_kfree; |
| |
| smbus->adapter.owner = THIS_MODULE; |
| snprintf(smbus->adapter.name, I2C_NAME_SIZE, |
| "SMBus2 AMD8111 adapter at %04x", smbus->base); |
| smbus->adapter.class = I2C_CLASS_HWMON; |
| smbus->adapter.algo = &smbus_algorithm; |
| smbus->adapter.algo_data = smbus; |
| |
| /* set up the driverfs linkage to our parent device */ |
| smbus->adapter.dev.parent = &dev->dev; |
| |
| error = i2c_add_adapter(&smbus->adapter); |
| if (error) |
| goto out_release_region; |
| |
| pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); |
| pci_set_drvdata(dev, smbus); |
| return 0; |
| |
| out_release_region: |
| release_region(smbus->base, smbus->size); |
| out_kfree: |
| kfree(smbus); |
| return -1; |
| } |
| |
| |
| static void __devexit amd8111_remove(struct pci_dev *dev) |
| { |
| struct amd_smbus *smbus = pci_get_drvdata(dev); |
| |
| i2c_del_adapter(&smbus->adapter); |
| release_region(smbus->base, smbus->size); |
| kfree(smbus); |
| } |
| |
| static struct pci_driver amd8111_driver = { |
| .name = "amd8111_smbus2", |
| .id_table = amd8111_ids, |
| .probe = amd8111_probe, |
| .remove = __devexit_p(amd8111_remove), |
| }; |
| |
| static int __init i2c_amd8111_init(void) |
| { |
| return pci_register_driver(&amd8111_driver); |
| } |
| |
| |
| static void __exit i2c_amd8111_exit(void) |
| { |
| pci_unregister_driver(&amd8111_driver); |
| } |
| |
| module_init(i2c_amd8111_init); |
| module_exit(i2c_amd8111_exit); |