| /* |
| * i2c-algo-sgi.c: i2c driver algorithms for SGI adapters. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License version 2 as published by the Free Software Foundation. |
| * |
| * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| |
| #include <linux/i2c.h> |
| #include <linux/i2c-algo-sgi.h> |
| |
| |
| #define SGI_I2C_FORCE_IDLE (0 << 0) |
| #define SGI_I2C_NOT_IDLE (1 << 0) |
| #define SGI_I2C_WRITE (0 << 1) |
| #define SGI_I2C_READ (1 << 1) |
| #define SGI_I2C_RELEASE_BUS (0 << 2) |
| #define SGI_I2C_HOLD_BUS (1 << 2) |
| #define SGI_I2C_XFER_DONE (0 << 4) |
| #define SGI_I2C_XFER_BUSY (1 << 4) |
| #define SGI_I2C_ACK (0 << 5) |
| #define SGI_I2C_NACK (1 << 5) |
| #define SGI_I2C_BUS_OK (0 << 7) |
| #define SGI_I2C_BUS_ERR (1 << 7) |
| |
| #define get_control() adap->getctrl(adap->data) |
| #define set_control(val) adap->setctrl(adap->data, val) |
| #define read_data() adap->rdata(adap->data) |
| #define write_data(val) adap->wdata(adap->data, val) |
| |
| |
| static int wait_xfer_done(struct i2c_algo_sgi_data *adap) |
| { |
| int i; |
| |
| for (i = 0; i < adap->xfer_timeout; i++) { |
| if ((get_control() & SGI_I2C_XFER_BUSY) == 0) |
| return 0; |
| udelay(1); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int wait_ack(struct i2c_algo_sgi_data *adap) |
| { |
| int i; |
| |
| if (wait_xfer_done(adap)) |
| return -ETIMEDOUT; |
| for (i = 0; i < adap->ack_timeout; i++) { |
| if ((get_control() & SGI_I2C_NACK) == 0) |
| return 0; |
| udelay(1); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int force_idle(struct i2c_algo_sgi_data *adap) |
| { |
| int i; |
| |
| set_control(SGI_I2C_FORCE_IDLE); |
| for (i = 0; i < adap->xfer_timeout; i++) { |
| if ((get_control() & SGI_I2C_NOT_IDLE) == 0) |
| goto out; |
| udelay(1); |
| } |
| return -ETIMEDOUT; |
| out: |
| if (get_control() & SGI_I2C_BUS_ERR) |
| return -EIO; |
| return 0; |
| } |
| |
| static int do_address(struct i2c_algo_sgi_data *adap, unsigned int addr, |
| int rd) |
| { |
| if (rd) |
| set_control(SGI_I2C_NOT_IDLE); |
| /* Check if bus is idle, eventually force it to do so */ |
| if (get_control() & SGI_I2C_NOT_IDLE) |
| if (force_idle(adap)) |
| return -EIO; |
| /* Write out the i2c chip address and specify operation */ |
| set_control(SGI_I2C_HOLD_BUS | SGI_I2C_WRITE | SGI_I2C_NOT_IDLE); |
| if (rd) |
| addr |= 1; |
| write_data(addr); |
| if (wait_ack(adap)) |
| return -EIO; |
| return 0; |
| } |
| |
| static int i2c_read(struct i2c_algo_sgi_data *adap, unsigned char *buf, |
| unsigned int len) |
| { |
| int i; |
| |
| set_control(SGI_I2C_HOLD_BUS | SGI_I2C_READ | SGI_I2C_NOT_IDLE); |
| for (i = 0; i < len; i++) { |
| if (wait_xfer_done(adap)) |
| return -EIO; |
| buf[i] = read_data(); |
| } |
| set_control(SGI_I2C_RELEASE_BUS | SGI_I2C_FORCE_IDLE); |
| |
| return 0; |
| |
| } |
| |
| static int i2c_write(struct i2c_algo_sgi_data *adap, unsigned char *buf, |
| unsigned int len) |
| { |
| int i; |
| |
| /* We are already in write state */ |
| for (i = 0; i < len; i++) { |
| write_data(buf[i]); |
| if (wait_ack(adap)) |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| static int sgi_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, |
| int num) |
| { |
| struct i2c_algo_sgi_data *adap = i2c_adap->algo_data; |
| struct i2c_msg *p; |
| int i, err = 0; |
| |
| for (i = 0; !err && i < num; i++) { |
| p = &msgs[i]; |
| err = do_address(adap, p->addr, p->flags & I2C_M_RD); |
| if (err || !p->len) |
| continue; |
| if (p->flags & I2C_M_RD) |
| err = i2c_read(adap, p->buf, p->len); |
| else |
| err = i2c_write(adap, p->buf, p->len); |
| } |
| |
| return err; |
| } |
| |
| static u32 sgi_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static struct i2c_algorithm sgi_algo = { |
| .name = "SGI algorithm", |
| .id = I2C_ALGO_SGI, |
| .master_xfer = sgi_xfer, |
| .functionality = sgi_func, |
| }; |
| |
| /* |
| * registering functions to load algorithms at runtime |
| */ |
| int i2c_sgi_add_bus(struct i2c_adapter *adap) |
| { |
| adap->id |= sgi_algo.id; |
| adap->algo = &sgi_algo; |
| |
| return i2c_add_adapter(adap); |
| } |
| |
| |
| int i2c_sgi_del_bus(struct i2c_adapter *adap) |
| { |
| return i2c_del_adapter(adap); |
| } |
| |
| EXPORT_SYMBOL(i2c_sgi_add_bus); |
| EXPORT_SYMBOL(i2c_sgi_del_bus); |
| |
| MODULE_AUTHOR("Ladislav Michl <ladis@linux-mips.org>"); |
| MODULE_DESCRIPTION("I2C-Bus SGI algorithm"); |
| MODULE_LICENSE("GPL"); |