| /* auxio.c: Probing for the Sparc AUXIO register at boot time. |
| * |
| * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) |
| * |
| * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net) |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| |
| #include <asm/oplib.h> |
| #include <asm/io.h> |
| #include <asm/sbus.h> |
| #include <asm/ebus.h> |
| #include <asm/auxio.h> |
| |
| /* This cannot be static, as it is referenced in entry.S */ |
| void __iomem *auxio_register = NULL; |
| |
| enum auxio_type { |
| AUXIO_TYPE_NODEV, |
| AUXIO_TYPE_SBUS, |
| AUXIO_TYPE_EBUS |
| }; |
| |
| static enum auxio_type auxio_devtype = AUXIO_TYPE_NODEV; |
| static DEFINE_SPINLOCK(auxio_lock); |
| |
| static void __auxio_sbus_set(u8 bits_on, u8 bits_off) |
| { |
| if (auxio_register) { |
| unsigned char regval; |
| unsigned long flags; |
| unsigned char newval; |
| |
| spin_lock_irqsave(&auxio_lock, flags); |
| |
| regval = sbus_readb(auxio_register); |
| newval = regval | bits_on; |
| newval &= ~bits_off; |
| newval &= ~AUXIO_AUX1_MASK; |
| sbus_writeb(newval, auxio_register); |
| |
| spin_unlock_irqrestore(&auxio_lock, flags); |
| } |
| } |
| |
| static void __auxio_ebus_set(u8 bits_on, u8 bits_off) |
| { |
| if (auxio_register) { |
| unsigned char regval; |
| unsigned long flags; |
| unsigned char newval; |
| |
| spin_lock_irqsave(&auxio_lock, flags); |
| |
| regval = (u8)readl(auxio_register); |
| newval = regval | bits_on; |
| newval &= ~bits_off; |
| writel((u32)newval, auxio_register); |
| |
| spin_unlock_irqrestore(&auxio_lock, flags); |
| } |
| } |
| |
| static inline void __auxio_ebus_set_led(int on) |
| { |
| (on) ? __auxio_ebus_set(AUXIO_PCIO_LED, 0) : |
| __auxio_ebus_set(0, AUXIO_PCIO_LED) ; |
| } |
| |
| static inline void __auxio_sbus_set_led(int on) |
| { |
| (on) ? __auxio_sbus_set(AUXIO_AUX1_LED, 0) : |
| __auxio_sbus_set(0, AUXIO_AUX1_LED) ; |
| } |
| |
| void auxio_set_led(int on) |
| { |
| switch(auxio_devtype) { |
| case AUXIO_TYPE_SBUS: |
| __auxio_sbus_set_led(on); |
| break; |
| case AUXIO_TYPE_EBUS: |
| __auxio_ebus_set_led(on); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static inline void __auxio_sbus_set_lte(int on) |
| { |
| (on) ? __auxio_sbus_set(AUXIO_AUX1_LTE, 0) : |
| __auxio_sbus_set(0, AUXIO_AUX1_LTE) ; |
| } |
| |
| void auxio_set_lte(int on) |
| { |
| switch(auxio_devtype) { |
| case AUXIO_TYPE_SBUS: |
| __auxio_sbus_set_lte(on); |
| break; |
| case AUXIO_TYPE_EBUS: |
| /* FALL-THROUGH */ |
| default: |
| break; |
| } |
| } |
| |
| void __init auxio_probe(void) |
| { |
| struct sbus_bus *sbus; |
| struct sbus_dev *sdev = NULL; |
| |
| for_each_sbus(sbus) { |
| for_each_sbusdev(sdev, sbus) { |
| if(!strcmp(sdev->prom_name, "auxio")) |
| goto found_sdev; |
| } |
| } |
| |
| found_sdev: |
| if (sdev) { |
| auxio_devtype = AUXIO_TYPE_SBUS; |
| auxio_register = sbus_ioremap(&sdev->resource[0], 0, |
| sdev->reg_addrs[0].reg_size, |
| "auxiliaryIO"); |
| } |
| #ifdef CONFIG_PCI |
| else { |
| struct linux_ebus *ebus; |
| struct linux_ebus_device *edev = NULL; |
| |
| for_each_ebus(ebus) { |
| for_each_ebusdev(edev, ebus) { |
| if (!strcmp(edev->prom_name, "auxio")) |
| goto ebus_done; |
| } |
| } |
| ebus_done: |
| if (edev) { |
| auxio_devtype = AUXIO_TYPE_EBUS; |
| auxio_register = |
| ioremap(edev->resource[0].start, sizeof(u32)); |
| } |
| } |
| auxio_set_led(AUXIO_LED_ON); |
| #endif |
| } |