| /* $Id: ebus.c,v 1.20 2002/01/05 01:13:43 davem Exp $ |
| * ebus.c: PCI to EBus bridge device. |
| * |
| * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) |
| * |
| * Adopted for sparc by V. Roganov and G. Raiko. |
| * Fixes for different platforms by Pete Zaitcev. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| |
| #include <asm/system.h> |
| #include <asm/page.h> |
| #include <asm/pbm.h> |
| #include <asm/ebus.h> |
| #include <asm/io.h> |
| #include <asm/oplib.h> |
| #include <asm/bpp.h> |
| |
| struct linux_ebus *ebus_chain = 0; |
| |
| /* We are together with pcic.c under CONFIG_PCI. */ |
| extern unsigned int pcic_pin_to_irq(unsigned int, char *name); |
| |
| /* |
| * IRQ Blacklist |
| * Here we list PROMs and systems that are known to supply crap as IRQ numbers. |
| */ |
| struct ebus_device_irq { |
| char *name; |
| unsigned int pin; |
| }; |
| |
| struct ebus_system_entry { |
| char *esname; |
| struct ebus_device_irq *ipt; |
| }; |
| |
| static struct ebus_device_irq je1_1[] = { |
| { "8042", 3 }, |
| { "SUNW,CS4231", 0 }, |
| { "parallel", 0 }, |
| { "se", 2 }, |
| { 0, 0 } |
| }; |
| |
| /* |
| * Gleb's JE1 supplied reasonable pin numbers, but mine did not (OBP 2.32). |
| * Blacklist the sucker... Note that Gleb's system will work. |
| */ |
| static struct ebus_system_entry ebus_blacklist[] = { |
| { "SUNW,JavaEngine1", je1_1 }, |
| { 0, 0 } |
| }; |
| |
| static struct ebus_device_irq *ebus_blackp = NULL; |
| |
| /* |
| */ |
| static inline unsigned long ebus_alloc(size_t size) |
| { |
| return (unsigned long)kmalloc(size, GFP_ATOMIC); |
| } |
| |
| /* |
| */ |
| int __init ebus_blacklist_irq(char *name) |
| { |
| struct ebus_device_irq *dp; |
| |
| if ((dp = ebus_blackp) != NULL) { |
| for (; dp->name != NULL; dp++) { |
| if (strcmp(name, dp->name) == 0) { |
| return pcic_pin_to_irq(dp->pin, name); |
| } |
| } |
| } |
| return 0; |
| } |
| |
| void __init fill_ebus_child(int node, struct linux_prom_registers *preg, |
| struct linux_ebus_child *dev) |
| { |
| int regs[PROMREG_MAX]; |
| int irqs[PROMREG_MAX]; |
| char lbuf[128]; |
| int i, len; |
| |
| dev->prom_node = node; |
| prom_getstring(node, "name", lbuf, sizeof(lbuf)); |
| strcpy(dev->prom_name, lbuf); |
| |
| len = prom_getproperty(node, "reg", (void *)regs, sizeof(regs)); |
| if (len == -1) len = 0; |
| dev->num_addrs = len / sizeof(regs[0]); |
| |
| for (i = 0; i < dev->num_addrs; i++) { |
| if (regs[i] >= dev->parent->num_addrs) { |
| prom_printf("UGH: property for %s was %d, need < %d\n", |
| dev->prom_name, len, dev->parent->num_addrs); |
| panic(__FUNCTION__); |
| } |
| dev->resource[i].start = dev->parent->resource[regs[i]].start; /* XXX resource */ |
| } |
| |
| for (i = 0; i < PROMINTR_MAX; i++) |
| dev->irqs[i] = PCI_IRQ_NONE; |
| |
| if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_name)) != 0) { |
| dev->num_irqs = 1; |
| } else if ((len = prom_getproperty(node, "interrupts", |
| (char *)&irqs, sizeof(irqs))) == -1 || len == 0) { |
| dev->num_irqs = 0; |
| dev->irqs[0] = 0; |
| if (dev->parent->num_irqs != 0) { |
| dev->num_irqs = 1; |
| dev->irqs[0] = dev->parent->irqs[0]; |
| /* P3 */ /* printk("EBUS: dev %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */ |
| } |
| } else { |
| dev->num_irqs = len / sizeof(irqs[0]); |
| if (irqs[0] == 0 || irqs[0] >= 8) { |
| /* |
| * XXX Zero is a valid pin number... |
| * This works as long as Ebus is not wired to INTA#. |
| */ |
| printk("EBUS: %s got bad irq %d from PROM\n", |
| dev->prom_name, irqs[0]); |
| dev->num_irqs = 0; |
| dev->irqs[0] = 0; |
| } else { |
| dev->irqs[0] = pcic_pin_to_irq(irqs[0], dev->prom_name); |
| } |
| } |
| } |
| |
| void __init fill_ebus_device(int node, struct linux_ebus_device *dev) |
| { |
| struct linux_prom_registers regs[PROMREG_MAX]; |
| struct linux_ebus_child *child; |
| int irqs[PROMINTR_MAX]; |
| char lbuf[128]; |
| int i, n, len; |
| unsigned long baseaddr; |
| |
| dev->prom_node = node; |
| prom_getstring(node, "name", lbuf, sizeof(lbuf)); |
| strcpy(dev->prom_name, lbuf); |
| |
| len = prom_getproperty(node, "reg", (void *)regs, sizeof(regs)); |
| if (len % sizeof(struct linux_prom_registers)) { |
| prom_printf("UGH: proplen for %s was %d, need multiple of %d\n", |
| dev->prom_name, len, |
| (int)sizeof(struct linux_prom_registers)); |
| panic(__FUNCTION__); |
| } |
| dev->num_addrs = len / sizeof(struct linux_prom_registers); |
| |
| for (i = 0; i < dev->num_addrs; i++) { |
| /* |
| * XXX Collect JE-1 PROM |
| * |
| * Example - JS-E with 3.11: |
| * /ebus |
| * regs |
| * 0x00000000, 0x0, 0x00000000, 0x0, 0x00000000, |
| * 0x82000010, 0x0, 0xf0000000, 0x0, 0x01000000, |
| * 0x82000014, 0x0, 0x38800000, 0x0, 0x00800000, |
| * ranges |
| * 0x00, 0x00000000, 0x02000010, 0x0, 0x0, 0x01000000, |
| * 0x01, 0x01000000, 0x02000014, 0x0, 0x0, 0x00800000, |
| * /ebus/8042 |
| * regs |
| * 0x00000001, 0x00300060, 0x00000008, |
| * 0x00000001, 0x00300060, 0x00000008, |
| */ |
| n = regs[i].which_io; |
| if (n >= 4) { |
| /* XXX This is copied from old JE-1 by Gleb. */ |
| n = (regs[i].which_io - 0x10) >> 2; |
| } else { |
| ; |
| } |
| |
| /* |
| * XXX Now as we have regions, why don't we make an on-demand allocation... |
| */ |
| dev->resource[i].start = 0; |
| if ((baseaddr = dev->bus->self->resource[n].start + |
| regs[i].phys_addr) != 0) { |
| /* dev->resource[i].name = dev->prom_name; */ |
| if ((baseaddr = (unsigned long) ioremap(baseaddr, |
| regs[i].reg_size)) == 0) { |
| panic("ebus: unable to remap dev %s", |
| dev->prom_name); |
| } |
| } |
| dev->resource[i].start = baseaddr; /* XXX Unaligned */ |
| } |
| |
| for (i = 0; i < PROMINTR_MAX; i++) |
| dev->irqs[i] = PCI_IRQ_NONE; |
| |
| if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_name)) != 0) { |
| dev->num_irqs = 1; |
| } else if ((len = prom_getproperty(node, "interrupts", |
| (char *)&irqs, sizeof(irqs))) == -1 || len == 0) { |
| dev->num_irqs = 0; |
| if ((dev->irqs[0] = dev->bus->self->irq) != 0) { |
| dev->num_irqs = 1; |
| /* P3 */ /* printk("EBUS: child %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */ |
| } |
| } else { |
| dev->num_irqs = 1; /* dev->num_irqs = len / sizeof(irqs[0]); */ |
| if (irqs[0] == 0 || irqs[0] >= 8) { |
| /* See above for the parent. XXX */ |
| printk("EBUS: %s got bad irq %d from PROM\n", |
| dev->prom_name, irqs[0]); |
| dev->num_irqs = 0; |
| dev->irqs[0] = 0; |
| } else { |
| dev->irqs[0] = pcic_pin_to_irq(irqs[0], dev->prom_name); |
| } |
| } |
| |
| if ((node = prom_getchild(node))) { |
| dev->children = (struct linux_ebus_child *) |
| ebus_alloc(sizeof(struct linux_ebus_child)); |
| |
| child = dev->children; |
| child->next = 0; |
| child->parent = dev; |
| child->bus = dev->bus; |
| fill_ebus_child(node, ®s[0], child); |
| |
| while ((node = prom_getsibling(node)) != 0) { |
| child->next = (struct linux_ebus_child *) |
| ebus_alloc(sizeof(struct linux_ebus_child)); |
| |
| child = child->next; |
| child->next = 0; |
| child->parent = dev; |
| child->bus = dev->bus; |
| fill_ebus_child(node, ®s[0], child); |
| } |
| } |
| } |
| |
| void __init ebus_init(void) |
| { |
| struct linux_prom_pci_registers regs[PROMREG_MAX]; |
| struct linux_pbm_info *pbm; |
| struct linux_ebus_device *dev; |
| struct linux_ebus *ebus; |
| struct ebus_system_entry *sp; |
| struct pci_dev *pdev; |
| struct pcidev_cookie *cookie; |
| char lbuf[128]; |
| unsigned long addr, *base; |
| unsigned short pci_command; |
| int nd, len, ebusnd; |
| int reg, nreg; |
| int num_ebus = 0; |
| |
| prom_getstring(prom_root_node, "name", lbuf, sizeof(lbuf)); |
| for (sp = ebus_blacklist; sp->esname != NULL; sp++) { |
| if (strcmp(lbuf, sp->esname) == 0) { |
| ebus_blackp = sp->ipt; |
| break; |
| } |
| } |
| |
| pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_EBUS, 0); |
| if (!pdev) { |
| return; |
| } |
| cookie = pdev->sysdata; |
| ebusnd = cookie->prom_node; |
| |
| ebus_chain = ebus = (struct linux_ebus *) |
| ebus_alloc(sizeof(struct linux_ebus)); |
| ebus->next = 0; |
| |
| while (ebusnd) { |
| |
| prom_getstring(ebusnd, "name", lbuf, sizeof(lbuf)); |
| ebus->prom_node = ebusnd; |
| strcpy(ebus->prom_name, lbuf); |
| ebus->self = pdev; |
| ebus->parent = pbm = cookie->pbm; |
| |
| /* Enable BUS Master. */ |
| pci_read_config_word(pdev, PCI_COMMAND, &pci_command); |
| pci_command |= PCI_COMMAND_MASTER; |
| pci_write_config_word(pdev, PCI_COMMAND, pci_command); |
| |
| len = prom_getproperty(ebusnd, "reg", (void *)regs, |
| sizeof(regs)); |
| if (len == 0 || len == -1) { |
| prom_printf("%s: can't find reg property\n", |
| __FUNCTION__); |
| prom_halt(); |
| } |
| nreg = len / sizeof(struct linux_prom_pci_registers); |
| |
| base = &ebus->self->resource[0].start; |
| for (reg = 0; reg < nreg; reg++) { |
| if (!(regs[reg].which_io & 0x03000000)) |
| continue; |
| |
| addr = regs[reg].phys_lo; |
| *base++ = addr; |
| } |
| |
| nd = prom_getchild(ebusnd); |
| if (!nd) |
| goto next_ebus; |
| |
| ebus->devices = (struct linux_ebus_device *) |
| ebus_alloc(sizeof(struct linux_ebus_device)); |
| |
| dev = ebus->devices; |
| dev->next = 0; |
| dev->children = 0; |
| dev->bus = ebus; |
| fill_ebus_device(nd, dev); |
| |
| while ((nd = prom_getsibling(nd)) != 0) { |
| dev->next = (struct linux_ebus_device *) |
| ebus_alloc(sizeof(struct linux_ebus_device)); |
| |
| dev = dev->next; |
| dev->next = 0; |
| dev->children = 0; |
| dev->bus = ebus; |
| fill_ebus_device(nd, dev); |
| } |
| |
| next_ebus: |
| pdev = pci_get_device(PCI_VENDOR_ID_SUN, |
| PCI_DEVICE_ID_SUN_EBUS, pdev); |
| if (!pdev) |
| break; |
| |
| cookie = pdev->sysdata; |
| ebusnd = cookie->prom_node; |
| |
| ebus->next = (struct linux_ebus *) |
| ebus_alloc(sizeof(struct linux_ebus)); |
| ebus = ebus->next; |
| ebus->next = 0; |
| ++num_ebus; |
| } |
| if (pdev) |
| pci_dev_put(pdev); |
| } |