| /* |
| * Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02) |
| * |
| * (c) 2002-2003 Saito.K & Jeanne |
| * |
| * Dustin McIntire (dustin@sensoria.com) |
| * Derived from arch/i386/kernel/pci-*.c which bore the message: |
| * (c) 1999--2000 Martin Mares <mj@ucw.cz> |
| * |
| * May be copied or modified under the terms of the GNU General Public |
| * License. See linux/COPYING for more information. |
| * |
| */ |
| #include <linux/config.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/sched.h> |
| #include <linux/ioport.h> |
| #include <linux/errno.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/machvec.h> |
| #include <asm/io.h> |
| #include <asm/mpc1211/pci.h> |
| |
| static struct resource mpcpci_io_resource = { |
| "MPCPCI IO", |
| 0x00000000, |
| 0xffffffff, |
| IORESOURCE_IO |
| }; |
| |
| static struct resource mpcpci_mem_resource = { |
| "MPCPCI mem", |
| 0x00000000, |
| 0xffffffff, |
| IORESOURCE_MEM |
| }; |
| |
| static struct pci_ops pci_direct_conf1; |
| struct pci_channel board_pci_channels[] = { |
| {&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256}, |
| {NULL, NULL, NULL, 0, 0}, |
| }; |
| |
| /* |
| * Direct access to PCI hardware... |
| */ |
| |
| |
| #define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) |
| |
| /* |
| * Functions for accessing PCI configuration space with type 1 accesses |
| */ |
| static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) |
| { |
| u32 word; |
| unsigned long flags; |
| |
| /* |
| * PCIPDR may only be accessed as 32 bit words, |
| * so we must do byte alignment by hand |
| */ |
| local_irq_save(flags); |
| writel(CONFIG_CMD(bus,devfn,where), PCIPAR); |
| word = readl(PCIPDR); |
| local_irq_restore(flags); |
| |
| switch (size) { |
| case 1: |
| switch (where & 0x3) { |
| case 3: |
| *value = (u8)(word >> 24); |
| break; |
| case 2: |
| *value = (u8)(word >> 16); |
| break; |
| case 1: |
| *value = (u8)(word >> 8); |
| break; |
| default: |
| *value = (u8)word; |
| break; |
| } |
| break; |
| case 2: |
| switch (where & 0x3) { |
| case 3: |
| *value = (u16)(word >> 24); |
| local_irq_save(flags); |
| writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR); |
| word = readl(PCIPDR); |
| local_irq_restore(flags); |
| *value |= ((word & 0xff) << 8); |
| break; |
| case 2: |
| *value = (u16)(word >> 16); |
| break; |
| case 1: |
| *value = (u16)(word >> 8); |
| break; |
| default: |
| *value = (u16)word; |
| break; |
| } |
| break; |
| case 4: |
| *value = word; |
| break; |
| } |
| PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| /* |
| * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation. |
| * We'll allow an odd byte offset, though it should be illegal. |
| */ |
| static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) |
| { |
| u32 word,mask = 0; |
| unsigned long flags; |
| u32 shift = (where & 3) * 8; |
| |
| if(size == 1) { |
| mask = ((1 << 8) - 1) << shift; // create the byte mask |
| } else if(size == 2){ |
| if(shift == 24) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| mask = ((1 << 16) - 1) << shift; // create the word mask |
| } |
| local_irq_save(flags); |
| writel(CONFIG_CMD(bus,devfn,where), PCIPAR); |
| if(size == 4){ |
| writel(value, PCIPDR); |
| local_irq_restore(flags); |
| PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| word = readl(PCIPDR); |
| word &= ~mask; |
| word |= ((value << shift) & mask); |
| writel(word, PCIPDR); |
| local_irq_restore(flags); |
| PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word); |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| #undef CONFIG_CMD |
| |
| static struct pci_ops pci_direct_conf1 = { |
| .read = pci_conf1_read, |
| .write = pci_conf1_write, |
| }; |
| |
| static void __devinit quirk_ali_ide_ports(struct pci_dev *dev) |
| { |
| dev->resource[0].start = 0x1f0; |
| dev->resource[0].end = 0x1f7; |
| dev->resource[0].flags = IORESOURCE_IO; |
| dev->resource[1].start = 0x3f6; |
| dev->resource[1].end = 0x3f6; |
| dev->resource[1].flags = IORESOURCE_IO; |
| dev->resource[2].start = 0x170; |
| dev->resource[2].end = 0x177; |
| dev->resource[2].flags = IORESOURCE_IO; |
| dev->resource[3].start = 0x376; |
| dev->resource[3].end = 0x376; |
| dev->resource[3].flags = IORESOURCE_IO; |
| dev->resource[4].start = 0xf000; |
| dev->resource[4].end = 0xf00f; |
| dev->resource[4].flags = IORESOURCE_IO; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports); |
| |
| char * __devinit pcibios_setup(char *str) |
| { |
| return str; |
| } |
| |
| /* |
| * Called after each bus is probed, but before its children |
| * are examined. |
| */ |
| |
| void __init pcibios_fixup_bus(struct pci_bus *b) |
| { |
| pci_read_bridge_bases(b); |
| } |
| |
| /* |
| * IRQ functions |
| */ |
| static inline u8 bridge_swizzle(u8 pin, u8 slot) |
| { |
| return (((pin-1) + slot) % 4) + 1; |
| } |
| |
| static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot) |
| { |
| return (((pin-1) - slot) & 3) + 1; |
| } |
| |
| static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp) |
| { |
| unsigned long flags; |
| u8 pin = *pinp; |
| u32 word; |
| |
| for ( ; dev->bus->self; dev = dev->bus->self) { |
| if (!pin) |
| continue; |
| |
| if (dev->bus->number == 1) { |
| local_irq_save(flags); |
| writel(0x80000000 | 0x2c, PCIPAR); |
| word = readl(PCIPDR); |
| local_irq_restore(flags); |
| word >>= 16; |
| |
| if (word == 0x0001) |
| pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn)); |
| else |
| pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); |
| } else |
| pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); |
| } |
| |
| *pinp = pin; |
| |
| return PCI_SLOT(dev->devfn); |
| } |
| |
| static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| int irq = -1; |
| |
| /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ |
| if (dev->bus->number == 0) { |
| switch (slot) { |
| case 13: irq = 9; break; /* USB */ |
| case 22: irq = 10; break; /* LAN */ |
| default: irq = 0; break; |
| } |
| } else { |
| switch (pin) { |
| case 0: irq = 0; break; |
| case 1: irq = 7; break; |
| case 2: irq = 9; break; |
| case 3: irq = 10; break; |
| case 4: irq = 11; break; |
| } |
| } |
| |
| if( irq < 0 ) { |
| PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev)); |
| return irq; |
| } |
| |
| PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq); |
| |
| return irq; |
| } |
| |
| void __init pcibios_fixup_irqs(void) |
| { |
| pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq); |
| } |
| |
| void pcibios_align_resource(void *data, struct resource *res, |
| unsigned long size, unsigned long align) |
| { |
| unsigned long start = res->start; |
| |
| if (res->flags & IORESOURCE_IO) { |
| if (start >= 0x10000UL) { |
| if ((start & 0xffffUL) < 0x4000UL) { |
| start = (start & 0xffff0000UL) + 0x4000UL; |
| } else if ((start & 0xffffUL) >= 0xf000UL) { |
| start = (start & 0xffff0000UL) + 0x10000UL; |
| } |
| res->start = start; |
| } else { |
| if (start & 0x300) { |
| start = (start + 0x3ff) & ~0x3ff; |
| res->start = start; |
| } |
| } |
| } |
| } |
| |