| #include <linux/irq.h> |
| |
| /* |
| * Global registers |
| */ |
| |
| #define MPIC_GREG_BASE 0x01000 |
| |
| #define MPIC_GREG_FEATURE_0 0x00000 |
| #define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 |
| #define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 |
| #define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 |
| #define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 |
| #define MPIC_GREG_FEATURE_VERSION_MASK 0xff |
| #define MPIC_GREG_FEATURE_1 0x00010 |
| #define MPIC_GREG_GLOBAL_CONF_0 0x00020 |
| #define MPIC_GREG_GCONF_RESET 0x80000000 |
| #define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 |
| #define MPIC_GREG_GCONF_BASE_MASK 0x000fffff |
| #define MPIC_GREG_GLOBAL_CONF_1 0x00030 |
| #define MPIC_GREG_VENDOR_0 0x00040 |
| #define MPIC_GREG_VENDOR_1 0x00050 |
| #define MPIC_GREG_VENDOR_2 0x00060 |
| #define MPIC_GREG_VENDOR_3 0x00070 |
| #define MPIC_GREG_VENDOR_ID 0x00080 |
| #define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 |
| #define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 |
| #define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 |
| #define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 |
| #define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff |
| #define MPIC_GREG_PROCESSOR_INIT 0x00090 |
| #define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 |
| #define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 |
| #define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 |
| #define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 |
| #define MPIC_GREG_SPURIOUS 0x000e0 |
| #define MPIC_GREG_TIMER_FREQ 0x000f0 |
| |
| /* |
| * |
| * Timer registers |
| */ |
| #define MPIC_TIMER_BASE 0x01100 |
| #define MPIC_TIMER_STRIDE 0x40 |
| |
| #define MPIC_TIMER_CURRENT_CNT 0x00000 |
| #define MPIC_TIMER_BASE_CNT 0x00010 |
| #define MPIC_TIMER_VECTOR_PRI 0x00020 |
| #define MPIC_TIMER_DESTINATION 0x00030 |
| |
| /* |
| * Per-Processor registers |
| */ |
| |
| #define MPIC_CPU_THISBASE 0x00000 |
| #define MPIC_CPU_BASE 0x20000 |
| #define MPIC_CPU_STRIDE 0x01000 |
| |
| #define MPIC_CPU_IPI_DISPATCH_0 0x00040 |
| #define MPIC_CPU_IPI_DISPATCH_1 0x00050 |
| #define MPIC_CPU_IPI_DISPATCH_2 0x00060 |
| #define MPIC_CPU_IPI_DISPATCH_3 0x00070 |
| #define MPIC_CPU_CURRENT_TASK_PRI 0x00080 |
| #define MPIC_CPU_TASKPRI_MASK 0x0000000f |
| #define MPIC_CPU_WHOAMI 0x00090 |
| #define MPIC_CPU_WHOAMI_MASK 0x0000001f |
| #define MPIC_CPU_INTACK 0x000a0 |
| #define MPIC_CPU_EOI 0x000b0 |
| |
| /* |
| * Per-source registers |
| */ |
| |
| #define MPIC_IRQ_BASE 0x10000 |
| #define MPIC_IRQ_STRIDE 0x00020 |
| #define MPIC_IRQ_VECTOR_PRI 0x00000 |
| #define MPIC_VECPRI_MASK 0x80000000 |
| #define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ |
| #define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 |
| #define MPIC_VECPRI_PRIORITY_SHIFT 16 |
| #define MPIC_VECPRI_VECTOR_MASK 0x000007ff |
| #define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 |
| #define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 |
| #define MPIC_VECPRI_POLARITY_MASK 0x00800000 |
| #define MPIC_VECPRI_SENSE_LEVEL 0x00400000 |
| #define MPIC_VECPRI_SENSE_EDGE 0x00000000 |
| #define MPIC_VECPRI_SENSE_MASK 0x00400000 |
| #define MPIC_IRQ_DESTINATION 0x00010 |
| |
| #define MPIC_MAX_IRQ_SOURCES 2048 |
| #define MPIC_MAX_CPUS 32 |
| #define MPIC_MAX_ISU 32 |
| |
| /* |
| * Special vector numbers (internal use only) |
| */ |
| #define MPIC_VEC_SPURRIOUS 255 |
| #define MPIC_VEC_IPI_3 254 |
| #define MPIC_VEC_IPI_2 253 |
| #define MPIC_VEC_IPI_1 252 |
| #define MPIC_VEC_IPI_0 251 |
| |
| /* unused */ |
| #define MPIC_VEC_TIMER_3 250 |
| #define MPIC_VEC_TIMER_2 249 |
| #define MPIC_VEC_TIMER_1 248 |
| #define MPIC_VEC_TIMER_0 247 |
| |
| /* Type definition of the cascade handler */ |
| typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data); |
| |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| /* Fixup table entry */ |
| struct mpic_irq_fixup |
| { |
| u8 __iomem *base; |
| unsigned int irq; |
| }; |
| #endif /* CONFIG_MPIC_BROKEN_U3 */ |
| |
| |
| /* The instance data of a given MPIC */ |
| struct mpic |
| { |
| /* The "linux" controller struct */ |
| hw_irq_controller hc_irq; |
| #ifdef CONFIG_SMP |
| hw_irq_controller hc_ipi; |
| #endif |
| const char *name; |
| /* Flags */ |
| unsigned int flags; |
| /* How many irq sources in a given ISU */ |
| unsigned int isu_size; |
| unsigned int isu_shift; |
| unsigned int isu_mask; |
| /* Offset of irq vector numbers */ |
| unsigned int irq_offset; |
| unsigned int irq_count; |
| /* Offset of ipi vector numbers */ |
| unsigned int ipi_offset; |
| /* Number of sources */ |
| unsigned int num_sources; |
| /* Number of CPUs */ |
| unsigned int num_cpus; |
| /* cascade handler */ |
| mpic_cascade_t cascade; |
| void *cascade_data; |
| unsigned int cascade_vec; |
| /* senses array */ |
| unsigned char *senses; |
| unsigned int senses_count; |
| |
| #ifdef CONFIG_MPIC_BROKEN_U3 |
| /* The fixup table */ |
| struct mpic_irq_fixup *fixups; |
| spinlock_t fixup_lock; |
| #endif |
| |
| /* The various ioremap'ed bases */ |
| volatile u32 __iomem *gregs; |
| volatile u32 __iomem *tmregs; |
| volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS]; |
| volatile u32 __iomem *isus[MPIC_MAX_ISU]; |
| |
| /* link */ |
| struct mpic *next; |
| }; |
| |
| /* This is the primary controller, only that one has IPIs and |
| * has afinity control. A non-primary MPIC always uses CPU0 |
| * registers only |
| */ |
| #define MPIC_PRIMARY 0x00000001 |
| /* Set this for a big-endian MPIC */ |
| #define MPIC_BIG_ENDIAN 0x00000002 |
| /* Broken U3 MPIC */ |
| #define MPIC_BROKEN_U3 0x00000004 |
| /* Broken IPI registers (autodetected) */ |
| #define MPIC_BROKEN_IPI 0x00000008 |
| /* MPIC wants a reset */ |
| #define MPIC_WANTS_RESET 0x00000010 |
| |
| /* Allocate the controller structure and setup the linux irq descs |
| * for the range if interrupts passed in. No HW initialization is |
| * actually performed. |
| * |
| * @phys_addr: physial base address of the MPIC |
| * @flags: flags, see constants above |
| * @isu_size: number of interrupts in an ISU. Use 0 to use a |
| * standard ISU-less setup (aka powermac) |
| * @irq_offset: first irq number to assign to this mpic |
| * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 |
| * to match the number of sources |
| * @ipi_offset: first irq number to assign to this mpic IPI sources, |
| * used only on primary mpic |
| * @senses: array of sense values |
| * @senses_num: number of entries in the array |
| * |
| * Note about the sense array. If none is passed, all interrupts are |
| * setup to be level negative unless MPIC_BROKEN_U3 is set in which |
| * case they are edge positive (and the array is ignored anyway). |
| * The values in the array start at the first source of the MPIC, |
| * that is senses[0] correspond to linux irq "irq_offset". |
| */ |
| extern struct mpic *mpic_alloc(unsigned long phys_addr, |
| unsigned int flags, |
| unsigned int isu_size, |
| unsigned int irq_offset, |
| unsigned int irq_count, |
| unsigned int ipi_offset, |
| unsigned char *senses, |
| unsigned int senses_num, |
| const char *name); |
| |
| /* Assign ISUs, to call before mpic_init() |
| * |
| * @mpic: controller structure as returned by mpic_alloc() |
| * @isu_num: ISU number |
| * @phys_addr: physical address of the ISU |
| */ |
| extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, |
| unsigned long phys_addr); |
| |
| /* Initialize the controller. After this has been called, none of the above |
| * should be called again for this mpic |
| */ |
| extern void mpic_init(struct mpic *mpic); |
| |
| /* Setup a cascade. Currently, only one cascade is supported this |
| * way, though you can always do a normal request_irq() and add |
| * other cascades this way. You should call this _after_ having |
| * added all the ISUs |
| * |
| * @irq_no: "linux" irq number of the cascade (that is offset'ed vector) |
| * @handler: cascade handler function |
| */ |
| extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder, |
| void *data); |
| |
| /* |
| * All of the following functions must only be used after the |
| * ISUs have been assigned and the controller fully initialized |
| * with mpic_init() |
| */ |
| |
| |
| /* Change/Read the priority of an interrupt. Default is 8 for irqs and |
| * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the |
| * IPI number is then the offset'ed (linux irq number mapped to the IPI) |
| */ |
| extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); |
| extern unsigned int mpic_irq_get_priority(unsigned int irq); |
| |
| /* Setup a non-boot CPU */ |
| extern void mpic_setup_this_cpu(void); |
| |
| /* Request IPIs on primary mpic */ |
| extern void mpic_request_ipis(void); |
| |
| /* Send an IPI (non offseted number 0..3) */ |
| extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); |
| |
| /* Fetch interrupt from a given mpic */ |
| extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs); |
| /* This one gets to the primary mpic */ |
| extern int mpic_get_irq(struct pt_regs *regs); |