| /* |
| * This file is derived from various .h and .c files from the zlib-0.95 |
| * distribution by Jean-loup Gailly and Mark Adler, with some additions |
| * by Paul Mackerras to aid in implementing Deflate compression and |
| * decompression for PPP packets. See zlib.h for conditions of |
| * distribution and use. |
| * |
| * Changes that have been made include: |
| * - changed functions not used outside this file to "local" |
| * - added minCompression parameter to deflateInit2 |
| * - added Z_PACKET_FLUSH (see zlib.h for details) |
| * - added inflateIncomp |
| * |
| Copyright (C) 1995 Jean-loup Gailly and Mark Adler |
| |
| This software is provided 'as-is', without any express or implied |
| warranty. In no event will the authors be held liable for any damages |
| arising from the use of this software. |
| |
| Permission is granted to anyone to use this software for any purpose, |
| including commercial applications, and to alter it and redistribute it |
| freely, subject to the following restrictions: |
| |
| 1. The origin of this software must not be misrepresented; you must not |
| claim that you wrote the original software. If you use this software |
| in a product, an acknowledgment in the product documentation would be |
| appreciated but is not required. |
| 2. Altered source versions must be plainly marked as such, and must not be |
| misrepresented as being the original software. |
| 3. This notice may not be removed or altered from any source distribution. |
| |
| Jean-loup Gailly Mark Adler |
| gzip@prep.ai.mit.edu madler@alumni.caltech.edu |
| |
| * |
| * |
| */ |
| |
| /*+++++*/ |
| /* zutil.h -- internal interface and configuration of the compression library |
| * Copyright (C) 1995 Jean-loup Gailly. |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* WARNING: this file should *not* be used by applications. It is |
| part of the implementation of the compression library and is |
| subject to change. Applications should only use zlib.h. |
| */ |
| |
| /* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */ |
| |
| #define _Z_UTIL_H |
| |
| #include "zlib.h" |
| |
| #ifndef local |
| # define local static |
| #endif |
| /* compile with -Dlocal if your debugger can't find static symbols */ |
| |
| #define FAR |
| |
| typedef unsigned char uch; |
| typedef uch FAR uchf; |
| typedef unsigned short ush; |
| typedef ush FAR ushf; |
| typedef unsigned long ulg; |
| |
| extern char *z_errmsg[]; /* indexed by 1-zlib_error */ |
| |
| #define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err) |
| /* To be used only when the state is known to be valid */ |
| |
| #ifndef NULL |
| #define NULL ((void *) 0) |
| #endif |
| |
| /* common constants */ |
| |
| #define DEFLATED 8 |
| |
| #ifndef DEF_WBITS |
| # define DEF_WBITS MAX_WBITS |
| #endif |
| /* default windowBits for decompression. MAX_WBITS is for compression only */ |
| |
| #if MAX_MEM_LEVEL >= 8 |
| # define DEF_MEM_LEVEL 8 |
| #else |
| # define DEF_MEM_LEVEL MAX_MEM_LEVEL |
| #endif |
| /* default memLevel */ |
| |
| #define STORED_BLOCK 0 |
| #define STATIC_TREES 1 |
| #define DYN_TREES 2 |
| /* The three kinds of block type */ |
| |
| #define MIN_MATCH 3 |
| #define MAX_MATCH 258 |
| /* The minimum and maximum match lengths */ |
| |
| /* functions */ |
| |
| extern void *memcpy(void *, const void *, unsigned long); |
| #define zmemcpy memcpy |
| |
| /* Diagnostic functions */ |
| #ifdef DEBUG_ZLIB |
| # include <stdio.h> |
| # ifndef verbose |
| # define verbose 0 |
| # endif |
| # define Assert(cond,msg) {if(!(cond)) z_error(msg);} |
| # define Trace(x) fprintf x |
| # define Tracev(x) {if (verbose) fprintf x ;} |
| # define Tracevv(x) {if (verbose>1) fprintf x ;} |
| # define Tracec(c,x) {if (verbose && (c)) fprintf x ;} |
| # define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} |
| #else |
| # define Assert(cond,msg) |
| # define Trace(x) |
| # define Tracev(x) |
| # define Tracevv(x) |
| # define Tracec(c,x) |
| # define Tracecv(c,x) |
| #endif |
| |
| |
| typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len)); |
| |
| /* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */ |
| /* void zcfree OF((voidpf opaque, voidpf ptr)); */ |
| |
| #define ZALLOC(strm, items, size) \ |
| (*((strm)->zalloc))((strm)->opaque, (items), (size)) |
| #define ZFREE(strm, addr, size) \ |
| (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size)) |
| #define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);} |
| |
| /* deflate.h -- internal compression state |
| * Copyright (C) 1995 Jean-loup Gailly |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* WARNING: this file should *not* be used by applications. It is |
| part of the implementation of the compression library and is |
| subject to change. Applications should only use zlib.h. |
| */ |
| |
| /*+++++*/ |
| /* infblock.h -- header to use infblock.c |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* WARNING: this file should *not* be used by applications. It is |
| part of the implementation of the compression library and is |
| subject to change. Applications should only use zlib.h. |
| */ |
| |
| struct inflate_blocks_state; |
| typedef struct inflate_blocks_state FAR inflate_blocks_statef; |
| |
| local inflate_blocks_statef * inflate_blocks_new OF(( |
| z_stream *z, |
| check_func c, /* check function */ |
| uInt w)); /* window size */ |
| |
| local int inflate_blocks OF(( |
| inflate_blocks_statef *, |
| z_stream *, |
| int)); /* initial return code */ |
| |
| local void inflate_blocks_reset OF(( |
| inflate_blocks_statef *, |
| z_stream *, |
| uLongf *)); /* check value on output */ |
| |
| local int inflate_blocks_free OF(( |
| inflate_blocks_statef *, |
| z_stream *, |
| uLongf *)); /* check value on output */ |
| |
| local int inflate_addhistory OF(( |
| inflate_blocks_statef *, |
| z_stream *)); |
| |
| local int inflate_packet_flush OF(( |
| inflate_blocks_statef *)); |
| |
| /*+++++*/ |
| /* inftrees.h -- header to use inftrees.c |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* WARNING: this file should *not* be used by applications. It is |
| part of the implementation of the compression library and is |
| subject to change. Applications should only use zlib.h. |
| */ |
| |
| /* Huffman code lookup table entry--this entry is four bytes for machines |
| that have 16-bit pointers (e.g. PC's in the small or medium model). */ |
| |
| typedef struct inflate_huft_s FAR inflate_huft; |
| |
| struct inflate_huft_s { |
| union { |
| struct { |
| Byte Exop; /* number of extra bits or operation */ |
| Byte Bits; /* number of bits in this code or subcode */ |
| } what; |
| uInt Nalloc; /* number of these allocated here */ |
| Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ |
| } word; /* 16-bit, 8 bytes for 32-bit machines) */ |
| union { |
| uInt Base; /* literal, length base, or distance base */ |
| inflate_huft *Next; /* pointer to next level of table */ |
| } more; |
| }; |
| |
| #ifdef DEBUG_ZLIB |
| local uInt inflate_hufts; |
| #endif |
| |
| local int inflate_trees_bits OF(( |
| uIntf *, /* 19 code lengths */ |
| uIntf *, /* bits tree desired/actual depth */ |
| inflate_huft * FAR *, /* bits tree result */ |
| z_stream *)); /* for zalloc, zfree functions */ |
| |
| local int inflate_trees_dynamic OF(( |
| uInt, /* number of literal/length codes */ |
| uInt, /* number of distance codes */ |
| uIntf *, /* that many (total) code lengths */ |
| uIntf *, /* literal desired/actual bit depth */ |
| uIntf *, /* distance desired/actual bit depth */ |
| inflate_huft * FAR *, /* literal/length tree result */ |
| inflate_huft * FAR *, /* distance tree result */ |
| z_stream *)); /* for zalloc, zfree functions */ |
| |
| local int inflate_trees_fixed OF(( |
| uIntf *, /* literal desired/actual bit depth */ |
| uIntf *, /* distance desired/actual bit depth */ |
| inflate_huft * FAR *, /* literal/length tree result */ |
| inflate_huft * FAR *)); /* distance tree result */ |
| |
| local int inflate_trees_free OF(( |
| inflate_huft *, /* tables to free */ |
| z_stream *)); /* for zfree function */ |
| |
| |
| /*+++++*/ |
| /* infcodes.h -- header to use infcodes.c |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* WARNING: this file should *not* be used by applications. It is |
| part of the implementation of the compression library and is |
| subject to change. Applications should only use zlib.h. |
| */ |
| |
| struct inflate_codes_state; |
| typedef struct inflate_codes_state FAR inflate_codes_statef; |
| |
| local inflate_codes_statef *inflate_codes_new OF(( |
| uInt, uInt, |
| inflate_huft *, inflate_huft *, |
| z_stream *)); |
| |
| local int inflate_codes OF(( |
| inflate_blocks_statef *, |
| z_stream *, |
| int)); |
| |
| local void inflate_codes_free OF(( |
| inflate_codes_statef *, |
| z_stream *)); |
| |
| |
| /*+++++*/ |
| /* inflate.c -- zlib interface to inflate modules |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* inflate private state */ |
| struct internal_state { |
| |
| /* mode */ |
| enum { |
| METHOD, /* waiting for method byte */ |
| FLAG, /* waiting for flag byte */ |
| BLOCKS, /* decompressing blocks */ |
| CHECK4, /* four check bytes to go */ |
| CHECK3, /* three check bytes to go */ |
| CHECK2, /* two check bytes to go */ |
| CHECK1, /* one check byte to go */ |
| DONE, /* finished check, done */ |
| BAD} /* got an error--stay here */ |
| mode; /* current inflate mode */ |
| |
| /* mode dependent information */ |
| union { |
| uInt method; /* if FLAGS, method byte */ |
| struct { |
| uLong was; /* computed check value */ |
| uLong need; /* stream check value */ |
| } check; /* if CHECK, check values to compare */ |
| uInt marker; /* if BAD, inflateSync's marker bytes count */ |
| } sub; /* submode */ |
| |
| /* mode independent information */ |
| int nowrap; /* flag for no wrapper */ |
| uInt wbits; /* log2(window size) (8..15, defaults to 15) */ |
| inflate_blocks_statef |
| *blocks; /* current inflate_blocks state */ |
| |
| }; |
| |
| |
| int inflateReset( |
| z_stream *z |
| ) |
| { |
| uLong c; |
| |
| if (z == Z_NULL || z->state == Z_NULL) |
| return Z_STREAM_ERROR; |
| z->total_in = z->total_out = 0; |
| z->msg = Z_NULL; |
| z->state->mode = z->state->nowrap ? BLOCKS : METHOD; |
| inflate_blocks_reset(z->state->blocks, z, &c); |
| Trace((stderr, "inflate: reset\n")); |
| return Z_OK; |
| } |
| |
| |
| int inflateEnd( |
| z_stream *z |
| ) |
| { |
| uLong c; |
| |
| if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) |
| return Z_STREAM_ERROR; |
| if (z->state->blocks != Z_NULL) |
| inflate_blocks_free(z->state->blocks, z, &c); |
| ZFREE(z, z->state, sizeof(struct internal_state)); |
| z->state = Z_NULL; |
| Trace((stderr, "inflate: end\n")); |
| return Z_OK; |
| } |
| |
| |
| int inflateInit2( |
| z_stream *z, |
| int w |
| ) |
| { |
| /* initialize state */ |
| if (z == Z_NULL) |
| return Z_STREAM_ERROR; |
| /* if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */ |
| /* if (z->zfree == Z_NULL) z->zfree = zcfree; */ |
| if ((z->state = (struct internal_state FAR *) |
| ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) |
| return Z_MEM_ERROR; |
| z->state->blocks = Z_NULL; |
| |
| /* handle undocumented nowrap option (no zlib header or check) */ |
| z->state->nowrap = 0; |
| if (w < 0) |
| { |
| w = - w; |
| z->state->nowrap = 1; |
| } |
| |
| /* set window size */ |
| if (w < 8 || w > 15) |
| { |
| inflateEnd(z); |
| return Z_STREAM_ERROR; |
| } |
| z->state->wbits = (uInt)w; |
| |
| /* create inflate_blocks state */ |
| if ((z->state->blocks = |
| inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w)) |
| == Z_NULL) |
| { |
| inflateEnd(z); |
| return Z_MEM_ERROR; |
| } |
| Trace((stderr, "inflate: allocated\n")); |
| |
| /* reset state */ |
| inflateReset(z); |
| return Z_OK; |
| } |
| |
| |
| int inflateInit( |
| z_stream *z |
| ) |
| { |
| return inflateInit2(z, DEF_WBITS); |
| } |
| |
| |
| #define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;} |
| #define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) |
| |
| int inflate( |
| z_stream *z, |
| int f |
| ) |
| { |
| int r; |
| uInt b; |
| |
| if (z == Z_NULL || z->next_in == Z_NULL) |
| return Z_STREAM_ERROR; |
| r = Z_BUF_ERROR; |
| while (1) switch (z->state->mode) |
| { |
| case METHOD: |
| NEEDBYTE |
| if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED) |
| { |
| z->state->mode = BAD; |
| z->msg = "unknown compression method"; |
| z->state->sub.marker = 5; /* can't try inflateSync */ |
| break; |
| } |
| if ((z->state->sub.method >> 4) + 8 > z->state->wbits) |
| { |
| z->state->mode = BAD; |
| z->msg = "invalid window size"; |
| z->state->sub.marker = 5; /* can't try inflateSync */ |
| break; |
| } |
| z->state->mode = FLAG; |
| case FLAG: |
| NEEDBYTE |
| if ((b = NEXTBYTE) & 0x20) |
| { |
| z->state->mode = BAD; |
| z->msg = "invalid reserved bit"; |
| z->state->sub.marker = 5; /* can't try inflateSync */ |
| break; |
| } |
| if (((z->state->sub.method << 8) + b) % 31) |
| { |
| z->state->mode = BAD; |
| z->msg = "incorrect header check"; |
| z->state->sub.marker = 5; /* can't try inflateSync */ |
| break; |
| } |
| Trace((stderr, "inflate: zlib header ok\n")); |
| z->state->mode = BLOCKS; |
| case BLOCKS: |
| r = inflate_blocks(z->state->blocks, z, r); |
| if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) |
| r = inflate_packet_flush(z->state->blocks); |
| if (r == Z_DATA_ERROR) |
| { |
| z->state->mode = BAD; |
| z->state->sub.marker = 0; /* can try inflateSync */ |
| break; |
| } |
| if (r != Z_STREAM_END) |
| return r; |
| r = Z_OK; |
| inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); |
| if (z->state->nowrap) |
| { |
| z->state->mode = DONE; |
| break; |
| } |
| z->state->mode = CHECK4; |
| case CHECK4: |
| NEEDBYTE |
| z->state->sub.check.need = (uLong)NEXTBYTE << 24; |
| z->state->mode = CHECK3; |
| case CHECK3: |
| NEEDBYTE |
| z->state->sub.check.need += (uLong)NEXTBYTE << 16; |
| z->state->mode = CHECK2; |
| case CHECK2: |
| NEEDBYTE |
| z->state->sub.check.need += (uLong)NEXTBYTE << 8; |
| z->state->mode = CHECK1; |
| case CHECK1: |
| NEEDBYTE |
| z->state->sub.check.need += (uLong)NEXTBYTE; |
| |
| if (z->state->sub.check.was != z->state->sub.check.need) |
| { |
| z->state->mode = BAD; |
| z->msg = "incorrect data check"; |
| z->state->sub.marker = 5; /* can't try inflateSync */ |
| break; |
| } |
| Trace((stderr, "inflate: zlib check ok\n")); |
| z->state->mode = DONE; |
| case DONE: |
| return Z_STREAM_END; |
| case BAD: |
| return Z_DATA_ERROR; |
| default: |
| return Z_STREAM_ERROR; |
| } |
| |
| empty: |
| if (f != Z_PACKET_FLUSH) |
| return r; |
| z->state->mode = BAD; |
| z->state->sub.marker = 0; /* can try inflateSync */ |
| return Z_DATA_ERROR; |
| } |
| |
| /* |
| * This subroutine adds the data at next_in/avail_in to the output history |
| * without performing any output. The output buffer must be "caught up"; |
| * i.e. no pending output (hence s->read equals s->write), and the state must |
| * be BLOCKS (i.e. we should be willing to see the start of a series of |
| * BLOCKS). On exit, the output will also be caught up, and the checksum |
| * will have been updated if need be. |
| */ |
| |
| int inflateIncomp( |
| z_stream *z |
| ) |
| { |
| if (z->state->mode != BLOCKS) |
| return Z_DATA_ERROR; |
| return inflate_addhistory(z->state->blocks, z); |
| } |
| |
| |
| int inflateSync( |
| z_stream *z |
| ) |
| { |
| uInt n; /* number of bytes to look at */ |
| Bytef *p; /* pointer to bytes */ |
| uInt m; /* number of marker bytes found in a row */ |
| uLong r, w; /* temporaries to save total_in and total_out */ |
| |
| /* set up */ |
| if (z == Z_NULL || z->state == Z_NULL) |
| return Z_STREAM_ERROR; |
| if (z->state->mode != BAD) |
| { |
| z->state->mode = BAD; |
| z->state->sub.marker = 0; |
| } |
| if ((n = z->avail_in) == 0) |
| return Z_BUF_ERROR; |
| p = z->next_in; |
| m = z->state->sub.marker; |
| |
| /* search */ |
| while (n && m < 4) |
| { |
| if (*p == (Byte)(m < 2 ? 0 : 0xff)) |
| m++; |
| else if (*p) |
| m = 0; |
| else |
| m = 4 - m; |
| p++, n--; |
| } |
| |
| /* restore */ |
| z->total_in += p - z->next_in; |
| z->next_in = p; |
| z->avail_in = n; |
| z->state->sub.marker = m; |
| |
| /* return no joy or set up to restart on a new block */ |
| if (m != 4) |
| return Z_DATA_ERROR; |
| r = z->total_in; w = z->total_out; |
| inflateReset(z); |
| z->total_in = r; z->total_out = w; |
| z->state->mode = BLOCKS; |
| return Z_OK; |
| } |
| |
| #undef NEEDBYTE |
| #undef NEXTBYTE |
| |
| /*+++++*/ |
| /* infutil.h -- types and macros common to blocks and codes |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* WARNING: this file should *not* be used by applications. It is |
| part of the implementation of the compression library and is |
| subject to change. Applications should only use zlib.h. |
| */ |
| |
| /* inflate blocks semi-private state */ |
| struct inflate_blocks_state { |
| |
| /* mode */ |
| enum { |
| TYPE, /* get type bits (3, including end bit) */ |
| LENS, /* get lengths for stored */ |
| STORED, /* processing stored block */ |
| TABLE, /* get table lengths */ |
| BTREE, /* get bit lengths tree for a dynamic block */ |
| DTREE, /* get length, distance trees for a dynamic block */ |
| CODES, /* processing fixed or dynamic block */ |
| DRY, /* output remaining window bytes */ |
| DONEB, /* finished last block, done */ |
| BADB} /* got a data error--stuck here */ |
| mode; /* current inflate_block mode */ |
| |
| /* mode dependent information */ |
| union { |
| uInt left; /* if STORED, bytes left to copy */ |
| struct { |
| uInt table; /* table lengths (14 bits) */ |
| uInt index; /* index into blens (or border) */ |
| uIntf *blens; /* bit lengths of codes */ |
| uInt bb; /* bit length tree depth */ |
| inflate_huft *tb; /* bit length decoding tree */ |
| int nblens; /* # elements allocated at blens */ |
| } trees; /* if DTREE, decoding info for trees */ |
| struct { |
| inflate_huft *tl, *td; /* trees to free */ |
| inflate_codes_statef |
| *codes; |
| } decode; /* if CODES, current state */ |
| } sub; /* submode */ |
| uInt last; /* true if this block is the last block */ |
| |
| /* mode independent information */ |
| uInt bitk; /* bits in bit buffer */ |
| uLong bitb; /* bit buffer */ |
| Bytef *window; /* sliding window */ |
| Bytef *end; /* one byte after sliding window */ |
| Bytef *read; /* window read pointer */ |
| Bytef *write; /* window write pointer */ |
| check_func checkfn; /* check function */ |
| uLong check; /* check on output */ |
| |
| }; |
| |
| |
| /* defines for inflate input/output */ |
| /* update pointers and return */ |
| #define UPDBITS {s->bitb=b;s->bitk=k;} |
| #define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} |
| #define UPDOUT {s->write=q;} |
| #define UPDATE {UPDBITS UPDIN UPDOUT} |
| #define LEAVE {UPDATE return inflate_flush(s,z,r);} |
| /* get bytes and bits */ |
| #define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} |
| #define NEEDBYTE {if(n)r=Z_OK;else LEAVE} |
| #define NEXTBYTE (n--,*p++) |
| #define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}} |
| #define DUMPBITS(j) {b>>=(j);k-=(j);} |
| /* output bytes */ |
| #define WAVAIL (q<s->read?s->read-q-1:s->end-q) |
| #define LOADOUT {q=s->write;m=WAVAIL;} |
| #define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}} |
| #define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} |
| #define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} |
| #define OUTBYTE(a) {*q++=(Byte)(a);m--;} |
| /* load local pointers */ |
| #define LOAD {LOADIN LOADOUT} |
| |
| /* And'ing with mask[n] masks the lower n bits */ |
| local uInt inflate_mask[] = { |
| 0x0000, |
| 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, |
| 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff |
| }; |
| |
| /* copy as much as possible from the sliding window to the output area */ |
| local int inflate_flush OF(( |
| inflate_blocks_statef *, |
| z_stream *, |
| int)); |
| |
| /*+++++*/ |
| /* inffast.h -- header to use inffast.c |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* WARNING: this file should *not* be used by applications. It is |
| part of the implementation of the compression library and is |
| subject to change. Applications should only use zlib.h. |
| */ |
| |
| local int inflate_fast OF(( |
| uInt, |
| uInt, |
| inflate_huft *, |
| inflate_huft *, |
| inflate_blocks_statef *, |
| z_stream *)); |
| |
| |
| /*+++++*/ |
| /* infblock.c -- interpret and process block types to last block |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* Table for deflate from PKZIP's appnote.txt. */ |
| local uInt border[] = { /* Order of the bit length code lengths */ |
| 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; |
| |
| /* |
| Notes beyond the 1.93a appnote.txt: |
| |
| 1. Distance pointers never point before the beginning of the output |
| stream. |
| 2. Distance pointers can point back across blocks, up to 32k away. |
| 3. There is an implied maximum of 7 bits for the bit length table and |
| 15 bits for the actual data. |
| 4. If only one code exists, then it is encoded using one bit. (Zero |
| would be more efficient, but perhaps a little confusing.) If two |
| codes exist, they are coded using one bit each (0 and 1). |
| 5. There is no way of sending zero distance codes--a dummy must be |
| sent if there are none. (History: a pre 2.0 version of PKZIP would |
| store blocks with no distance codes, but this was discovered to be |
| too harsh a criterion.) Valid only for 1.93a. 2.04c does allow |
| zero distance codes, which is sent as one code of zero bits in |
| length. |
| 6. There are up to 286 literal/length codes. Code 256 represents the |
| end-of-block. Note however that the static length tree defines |
| 288 codes just to fill out the Huffman codes. Codes 286 and 287 |
| cannot be used though, since there is no length base or extra bits |
| defined for them. Similarily, there are up to 30 distance codes. |
| However, static trees define 32 codes (all 5 bits) to fill out the |
| Huffman codes, but the last two had better not show up in the data. |
| 7. Unzip can check dynamic Huffman blocks for complete code sets. |
| The exception is that a single code would not be complete (see #4). |
| 8. The five bits following the block type is really the number of |
| literal codes sent minus 257. |
| 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits |
| (1+6+6). Therefore, to output three times the length, you output |
| three codes (1+1+1), whereas to output four times the same length, |
| you only need two codes (1+3). Hmm. |
| 10. In the tree reconstruction algorithm, Code = Code + Increment |
| only if BitLength(i) is not zero. (Pretty obvious.) |
| 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) |
| 12. Note: length code 284 can represent 227-258, but length code 285 |
| really is 258. The last length deserves its own, short code |
| since it gets used a lot in very redundant files. The length |
| 258 is special since 258 - 3 (the min match length) is 255. |
| 13. The literal/length and distance code bit lengths are read as a |
| single stream of lengths. It is possible (and advantageous) for |
| a repeat code (16, 17, or 18) to go across the boundary between |
| the two sets of lengths. |
| */ |
| |
| |
| local void inflate_blocks_reset( |
| inflate_blocks_statef *s, |
| z_stream *z, |
| uLongf *c |
| ) |
| { |
| if (s->checkfn != Z_NULL) |
| *c = s->check; |
| if (s->mode == BTREE || s->mode == DTREE) |
| ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); |
| if (s->mode == CODES) |
| { |
| inflate_codes_free(s->sub.decode.codes, z); |
| inflate_trees_free(s->sub.decode.td, z); |
| inflate_trees_free(s->sub.decode.tl, z); |
| } |
| s->mode = TYPE; |
| s->bitk = 0; |
| s->bitb = 0; |
| s->read = s->write = s->window; |
| if (s->checkfn != Z_NULL) |
| s->check = (*s->checkfn)(0L, Z_NULL, 0); |
| Trace((stderr, "inflate: blocks reset\n")); |
| } |
| |
| |
| local inflate_blocks_statef *inflate_blocks_new( |
| z_stream *z, |
| check_func c, |
| uInt w |
| ) |
| { |
| inflate_blocks_statef *s; |
| |
| if ((s = (inflate_blocks_statef *)ZALLOC |
| (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) |
| return s; |
| if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) |
| { |
| ZFREE(z, s, sizeof(struct inflate_blocks_state)); |
| return Z_NULL; |
| } |
| s->end = s->window + w; |
| s->checkfn = c; |
| s->mode = TYPE; |
| Trace((stderr, "inflate: blocks allocated\n")); |
| inflate_blocks_reset(s, z, &s->check); |
| return s; |
| } |
| |
| |
| local int inflate_blocks( |
| inflate_blocks_statef *s, |
| z_stream *z, |
| int r |
| ) |
| { |
| uInt t; /* temporary storage */ |
| uLong b; /* bit buffer */ |
| uInt k; /* bits in bit buffer */ |
| Bytef *p; /* input data pointer */ |
| uInt n; /* bytes available there */ |
| Bytef *q; /* output window write pointer */ |
| uInt m; /* bytes to end of window or read pointer */ |
| |
| /* copy input/output information to locals (UPDATE macro restores) */ |
| LOAD |
| |
| /* process input based on current state */ |
| while (1) switch (s->mode) |
| { |
| case TYPE: |
| NEEDBITS(3) |
| t = (uInt)b & 7; |
| s->last = t & 1; |
| switch (t >> 1) |
| { |
| case 0: /* stored */ |
| Trace((stderr, "inflate: stored block%s\n", |
| s->last ? " (last)" : "")); |
| DUMPBITS(3) |
| t = k & 7; /* go to byte boundary */ |
| DUMPBITS(t) |
| s->mode = LENS; /* get length of stored block */ |
| break; |
| case 1: /* fixed */ |
| Trace((stderr, "inflate: fixed codes block%s\n", |
| s->last ? " (last)" : "")); |
| { |
| uInt bl, bd; |
| inflate_huft *tl, *td; |
| |
| inflate_trees_fixed(&bl, &bd, &tl, &td); |
| s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); |
| if (s->sub.decode.codes == Z_NULL) |
| { |
| r = Z_MEM_ERROR; |
| LEAVE |
| } |
| s->sub.decode.tl = Z_NULL; /* don't try to free these */ |
| s->sub.decode.td = Z_NULL; |
| } |
| DUMPBITS(3) |
| s->mode = CODES; |
| break; |
| case 2: /* dynamic */ |
| Trace((stderr, "inflate: dynamic codes block%s\n", |
| s->last ? " (last)" : "")); |
| DUMPBITS(3) |
| s->mode = TABLE; |
| break; |
| case 3: /* illegal */ |
| DUMPBITS(3) |
| s->mode = BADB; |
| z->msg = "invalid block type"; |
| r = Z_DATA_ERROR; |
| LEAVE |
| } |
| break; |
| case LENS: |
| NEEDBITS(32) |
| if (((~b) >> 16) != (b & 0xffff)) |
| { |
| s->mode = BADB; |
| z->msg = "invalid stored block lengths"; |
| r = Z_DATA_ERROR; |
| LEAVE |
| } |
| s->sub.left = (uInt)b & 0xffff; |
| b = k = 0; /* dump bits */ |
| Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); |
| s->mode = s->sub.left ? STORED : TYPE; |
| break; |
| case STORED: |
| if (n == 0) |
| LEAVE |
| NEEDOUT |
| t = s->sub.left; |
| if (t > n) t = n; |
| if (t > m) t = m; |
| zmemcpy(q, p, t); |
| p += t; n -= t; |
| q += t; m -= t; |
| if ((s->sub.left -= t) != 0) |
| break; |
| Tracev((stderr, "inflate: stored end, %lu total out\n", |
| z->total_out + (q >= s->read ? q - s->read : |
| (s->end - s->read) + (q - s->window)))); |
| s->mode = s->last ? DRY : TYPE; |
| break; |
| case TABLE: |
| NEEDBITS(14) |
| s->sub.trees.table = t = (uInt)b & 0x3fff; |
| #ifndef PKZIP_BUG_WORKAROUND |
| if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) |
| { |
| s->mode = BADB; |
| z->msg = "too many length or distance symbols"; |
| r = Z_DATA_ERROR; |
| LEAVE |
| } |
| #endif |
| t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); |
| if (t < 19) |
| t = 19; |
| if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) |
| { |
| r = Z_MEM_ERROR; |
| LEAVE |
| } |
| s->sub.trees.nblens = t; |
| DUMPBITS(14) |
| s->sub.trees.index = 0; |
| Tracev((stderr, "inflate: table sizes ok\n")); |
| s->mode = BTREE; |
| case BTREE: |
| while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) |
| { |
| NEEDBITS(3) |
| s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; |
| DUMPBITS(3) |
| } |
| while (s->sub.trees.index < 19) |
| s->sub.trees.blens[border[s->sub.trees.index++]] = 0; |
| s->sub.trees.bb = 7; |
| t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, |
| &s->sub.trees.tb, z); |
| if (t != Z_OK) |
| { |
| r = t; |
| if (r == Z_DATA_ERROR) |
| s->mode = BADB; |
| LEAVE |
| } |
| s->sub.trees.index = 0; |
| Tracev((stderr, "inflate: bits tree ok\n")); |
| s->mode = DTREE; |
| case DTREE: |
| while (t = s->sub.trees.table, |
| s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) |
| { |
| inflate_huft *h; |
| uInt i, j, c; |
| |
| t = s->sub.trees.bb; |
| NEEDBITS(t) |
| h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); |
| t = h->word.what.Bits; |
| c = h->more.Base; |
| if (c < 16) |
| { |
| DUMPBITS(t) |
| s->sub.trees.blens[s->sub.trees.index++] = c; |
| } |
| else /* c == 16..18 */ |
| { |
| i = c == 18 ? 7 : c - 14; |
| j = c == 18 ? 11 : 3; |
| NEEDBITS(t + i) |
| DUMPBITS(t) |
| j += (uInt)b & inflate_mask[i]; |
| DUMPBITS(i) |
| i = s->sub.trees.index; |
| t = s->sub.trees.table; |
| if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || |
| (c == 16 && i < 1)) |
| { |
| s->mode = BADB; |
| z->msg = "invalid bit length repeat"; |
| r = Z_DATA_ERROR; |
| LEAVE |
| } |
| c = c == 16 ? s->sub.trees.blens[i - 1] : 0; |
| do { |
| s->sub.trees.blens[i++] = c; |
| } while (--j); |
| s->sub.trees.index = i; |
| } |
| } |
| inflate_trees_free(s->sub.trees.tb, z); |
| s->sub.trees.tb = Z_NULL; |
| { |
| uInt bl, bd; |
| inflate_huft *tl, *td; |
| inflate_codes_statef *c; |
| |
| bl = 9; /* must be <= 9 for lookahead assumptions */ |
| bd = 6; /* must be <= 9 for lookahead assumptions */ |
| t = s->sub.trees.table; |
| t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), |
| s->sub.trees.blens, &bl, &bd, &tl, &td, z); |
| if (t != Z_OK) |
| { |
| if (t == (uInt)Z_DATA_ERROR) |
| s->mode = BADB; |
| r = t; |
| LEAVE |
| } |
| Tracev((stderr, "inflate: trees ok\n")); |
| if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) |
| { |
| inflate_trees_free(td, z); |
| inflate_trees_free(tl, z); |
| r = Z_MEM_ERROR; |
| LEAVE |
| } |
| ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); |
| s->sub.decode.codes = c; |
| s->sub.decode.tl = tl; |
| s->sub.decode.td = td; |
| } |
| s->mode = CODES; |
| case CODES: |
| UPDATE |
| if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) |
| return inflate_flush(s, z, r); |
| r = Z_OK; |
| inflate_codes_free(s->sub.decode.codes, z); |
| inflate_trees_free(s->sub.decode.td, z); |
| inflate_trees_free(s->sub.decode.tl, z); |
| LOAD |
| Tracev((stderr, "inflate: codes end, %lu total out\n", |
| z->total_out + (q >= s->read ? q - s->read : |
| (s->end - s->read) + (q - s->window)))); |
| if (!s->last) |
| { |
| s->mode = TYPE; |
| break; |
| } |
| if (k > 7) /* return unused byte, if any */ |
| { |
| Assert(k < 16, "inflate_codes grabbed too many bytes") |
| k -= 8; |
| n++; |
| p--; /* can always return one */ |
| } |
| s->mode = DRY; |
| case DRY: |
| FLUSH |
| if (s->read != s->write) |
| LEAVE |
| s->mode = DONEB; |
| case DONEB: |
| r = Z_STREAM_END; |
| LEAVE |
| case BADB: |
| r = Z_DATA_ERROR; |
| LEAVE |
| default: |
| r = Z_STREAM_ERROR; |
| LEAVE |
| } |
| } |
| |
| |
| local int inflate_blocks_free( |
| inflate_blocks_statef *s, |
| z_stream *z, |
| uLongf *c |
| ) |
| { |
| inflate_blocks_reset(s, z, c); |
| ZFREE(z, s->window, s->end - s->window); |
| ZFREE(z, s, sizeof(struct inflate_blocks_state)); |
| Trace((stderr, "inflate: blocks freed\n")); |
| return Z_OK; |
| } |
| |
| /* |
| * This subroutine adds the data at next_in/avail_in to the output history |
| * without performing any output. The output buffer must be "caught up"; |
| * i.e. no pending output (hence s->read equals s->write), and the state must |
| * be BLOCKS (i.e. we should be willing to see the start of a series of |
| * BLOCKS). On exit, the output will also be caught up, and the checksum |
| * will have been updated if need be. |
| */ |
| local int inflate_addhistory( |
| inflate_blocks_statef *s, |
| z_stream *z |
| ) |
| { |
| uLong b; /* bit buffer */ /* NOT USED HERE */ |
| uInt k; /* bits in bit buffer */ /* NOT USED HERE */ |
| uInt t; /* temporary storage */ |
| Bytef *p; /* input data pointer */ |
| uInt n; /* bytes available there */ |
| Bytef *q; /* output window write pointer */ |
| uInt m; /* bytes to end of window or read pointer */ |
| |
| if (s->read != s->write) |
| return Z_STREAM_ERROR; |
| if (s->mode != TYPE) |
| return Z_DATA_ERROR; |
| |
| /* we're ready to rock */ |
| LOAD |
| /* while there is input ready, copy to output buffer, moving |
| * pointers as needed. |
| */ |
| while (n) { |
| t = n; /* how many to do */ |
| /* is there room until end of buffer? */ |
| if (t > m) t = m; |
| /* update check information */ |
| if (s->checkfn != Z_NULL) |
| s->check = (*s->checkfn)(s->check, q, t); |
| zmemcpy(q, p, t); |
| q += t; |
| p += t; |
| n -= t; |
| z->total_out += t; |
| s->read = q; /* drag read pointer forward */ |
| /* WRAP */ /* expand WRAP macro by hand to handle s->read */ |
| if (q == s->end) { |
| s->read = q = s->window; |
| m = WAVAIL; |
| } |
| } |
| UPDATE |
| return Z_OK; |
| } |
| |
| |
| /* |
| * At the end of a Deflate-compressed PPP packet, we expect to have seen |
| * a `stored' block type value but not the (zero) length bytes. |
| */ |
| local int inflate_packet_flush( |
| inflate_blocks_statef *s |
| ) |
| { |
| if (s->mode != LENS) |
| return Z_DATA_ERROR; |
| s->mode = TYPE; |
| return Z_OK; |
| } |
| |
| |
| /*+++++*/ |
| /* inftrees.c -- generate Huffman trees for efficient decoding |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* simplify the use of the inflate_huft type with some defines */ |
| #define base more.Base |
| #define next more.Next |
| #define exop word.what.Exop |
| #define bits word.what.Bits |
| |
| |
| local int huft_build OF(( |
| uIntf *, /* code lengths in bits */ |
| uInt, /* number of codes */ |
| uInt, /* number of "simple" codes */ |
| uIntf *, /* list of base values for non-simple codes */ |
| uIntf *, /* list of extra bits for non-simple codes */ |
| inflate_huft * FAR*,/* result: starting table */ |
| uIntf *, /* maximum lookup bits (returns actual) */ |
| z_stream *)); /* for zalloc function */ |
| |
| local voidpf falloc OF(( |
| voidpf, /* opaque pointer (not used) */ |
| uInt, /* number of items */ |
| uInt)); /* size of item */ |
| |
| local void ffree OF(( |
| voidpf q, /* opaque pointer (not used) */ |
| voidpf p, /* what to free (not used) */ |
| uInt n)); /* number of bytes (not used) */ |
| |
| /* Tables for deflate from PKZIP's appnote.txt. */ |
| local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */ |
| 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, |
| 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; |
| /* actually lengths - 2; also see note #13 above about 258 */ |
| local uInt cplext[] = { /* Extra bits for literal codes 257..285 */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, |
| 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */ |
| local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */ |
| 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, |
| 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, |
| 8193, 12289, 16385, 24577}; |
| local uInt cpdext[] = { /* Extra bits for distance codes */ |
| 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, |
| 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, |
| 12, 12, 13, 13}; |
| |
| /* |
| Huffman code decoding is performed using a multi-level table lookup. |
| The fastest way to decode is to simply build a lookup table whose |
| size is determined by the longest code. However, the time it takes |
| to build this table can also be a factor if the data being decoded |
| is not very long. The most common codes are necessarily the |
| shortest codes, so those codes dominate the decoding time, and hence |
| the speed. The idea is you can have a shorter table that decodes the |
| shorter, more probable codes, and then point to subsidiary tables for |
| the longer codes. The time it costs to decode the longer codes is |
| then traded against the time it takes to make longer tables. |
| |
| This results of this trade are in the variables lbits and dbits |
| below. lbits is the number of bits the first level table for literal/ |
| length codes can decode in one step, and dbits is the same thing for |
| the distance codes. Subsequent tables are also less than or equal to |
| those sizes. These values may be adjusted either when all of the |
| codes are shorter than that, in which case the longest code length in |
| bits is used, or when the shortest code is *longer* than the requested |
| table size, in which case the length of the shortest code in bits is |
| used. |
| |
| There are two different values for the two tables, since they code a |
| different number of possibilities each. The literal/length table |
| codes 286 possible values, or in a flat code, a little over eight |
| bits. The distance table codes 30 possible values, or a little less |
| than five bits, flat. The optimum values for speed end up being |
| about one bit more than those, so lbits is 8+1 and dbits is 5+1. |
| The optimum values may differ though from machine to machine, and |
| possibly even between compilers. Your mileage may vary. |
| */ |
| |
| |
| /* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ |
| #define BMAX 15 /* maximum bit length of any code */ |
| #define N_MAX 288 /* maximum number of codes in any set */ |
| |
| #ifdef DEBUG_ZLIB |
| uInt inflate_hufts; |
| #endif |
| |
| local int huft_build( |
| uIntf *b, /* code lengths in bits (all assumed <= BMAX) */ |
| uInt n, /* number of codes (assumed <= N_MAX) */ |
| uInt s, /* number of simple-valued codes (0..s-1) */ |
| uIntf *d, /* list of base values for non-simple codes */ |
| uIntf *e, /* list of extra bits for non-simple codes */ |
| inflate_huft * FAR *t, /* result: starting table */ |
| uIntf *m, /* maximum lookup bits, returns actual */ |
| z_stream *zs /* for zalloc function */ |
| ) |
| /* Given a list of code lengths and a maximum table size, make a set of |
| tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR |
| if the given code set is incomplete (the tables are still built in this |
| case), Z_DATA_ERROR if the input is invalid (all zero length codes or an |
| over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */ |
| { |
| |
| uInt a; /* counter for codes of length k */ |
| uInt c[BMAX+1]; /* bit length count table */ |
| uInt f; /* i repeats in table every f entries */ |
| int g; /* maximum code length */ |
| int h; /* table level */ |
| register uInt i; /* counter, current code */ |
| register uInt j; /* counter */ |
| register int k; /* number of bits in current code */ |
| int l; /* bits per table (returned in m) */ |
| register uIntf *p; /* pointer into c[], b[], or v[] */ |
| inflate_huft *q; /* points to current table */ |
| struct inflate_huft_s r; /* table entry for structure assignment */ |
| inflate_huft *u[BMAX]; /* table stack */ |
| uInt v[N_MAX]; /* values in order of bit length */ |
| register int w; /* bits before this table == (l * h) */ |
| uInt x[BMAX+1]; /* bit offsets, then code stack */ |
| uIntf *xp; /* pointer into x */ |
| int y; /* number of dummy codes added */ |
| uInt z; /* number of entries in current table */ |
| |
| |
| /* Generate counts for each bit length */ |
| p = c; |
| #define C0 *p++ = 0; |
| #define C2 C0 C0 C0 C0 |
| #define C4 C2 C2 C2 C2 |
| C4 /* clear c[]--assume BMAX+1 is 16 */ |
| p = b; i = n; |
| do { |
| c[*p++]++; /* assume all entries <= BMAX */ |
| } while (--i); |
| if (c[0] == n) /* null input--all zero length codes */ |
| { |
| *t = (inflate_huft *)Z_NULL; |
| *m = 0; |
| return Z_OK; |
| } |
| |
| |
| /* Find minimum and maximum length, bound *m by those */ |
| l = *m; |
| for (j = 1; j <= BMAX; j++) |
| if (c[j]) |
| break; |
| k = j; /* minimum code length */ |
| if ((uInt)l < j) |
| l = j; |
| for (i = BMAX; i; i--) |
| if (c[i]) |
| break; |
| g = i; /* maximum code length */ |
| if ((uInt)l > i) |
| l = i; |
| *m = l; |
| |
| |
| /* Adjust last length count to fill out codes, if needed */ |
| for (y = 1 << j; j < i; j++, y <<= 1) |
| if ((y -= c[j]) < 0) |
| return Z_DATA_ERROR; |
| if ((y -= c[i]) < 0) |
| return Z_DATA_ERROR; |
| c[i] += y; |
| |
| |
| /* Generate starting offsets into the value table for each length */ |
| x[1] = j = 0; |
| p = c + 1; xp = x + 2; |
| while (--i) { /* note that i == g from above */ |
| *xp++ = (j += *p++); |
| } |
| |
| |
| /* Make a table of values in order of bit lengths */ |
| p = b; i = 0; |
| do { |
| if ((j = *p++) != 0) |
| v[x[j]++] = i; |
| } while (++i < n); |
| |
| |
| /* Generate the Huffman codes and for each, make the table entries */ |
| x[0] = i = 0; /* first Huffman code is zero */ |
| p = v; /* grab values in bit order */ |
| h = -1; /* no tables yet--level -1 */ |
| w = -l; /* bits decoded == (l * h) */ |
| u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ |
| q = (inflate_huft *)Z_NULL; /* ditto */ |
| z = 0; /* ditto */ |
| |
| /* go through the bit lengths (k already is bits in shortest code) */ |
| for (; k <= g; k++) |
| { |
| a = c[k]; |
| while (a--) |
| { |
| /* here i is the Huffman code of length k bits for value *p */ |
| /* make tables up to required level */ |
| while (k > w + l) |
| { |
| h++; |
| w += l; /* previous table always l bits */ |
| |
| /* compute minimum size table less than or equal to l bits */ |
| z = (z = g - w) > (uInt)l ? l : z; /* table size upper limit */ |
| if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ |
| { /* too few codes for k-w bit table */ |
| f -= a + 1; /* deduct codes from patterns left */ |
| xp = c + k; |
| if (j < z) |
| while (++j < z) /* try smaller tables up to z bits */ |
| { |
| if ((f <<= 1) <= *++xp) |
| break; /* enough codes to use up j bits */ |
| f -= *xp; /* else deduct codes from patterns */ |
| } |
| } |
| z = 1 << j; /* table entries for j-bit table */ |
| |
| /* allocate and link in new table */ |
| if ((q = (inflate_huft *)ZALLOC |
| (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) |
| { |
| if (h) |
| inflate_trees_free(u[0], zs); |
| return Z_MEM_ERROR; /* not enough memory */ |
| } |
| q->word.Nalloc = z + 1; |
| #ifdef DEBUG_ZLIB |
| inflate_hufts += z + 1; |
| #endif |
| *t = q + 1; /* link to list for huft_free() */ |
| *(t = &(q->next)) = Z_NULL; |
| u[h] = ++q; /* table starts after link */ |
| |
| /* connect to last table, if there is one */ |
| if (h) |
| { |
| x[h] = i; /* save pattern for backing up */ |
| r.bits = (Byte)l; /* bits to dump before this table */ |
| r.exop = (Byte)j; /* bits in this table */ |
| r.next = q; /* pointer to this table */ |
| j = i >> (w - l); /* (get around Turbo C bug) */ |
| u[h-1][j] = r; /* connect to last table */ |
| } |
| } |
| |
| /* set up table entry in r */ |
| r.bits = (Byte)(k - w); |
| if (p >= v + n) |
| r.exop = 128 + 64; /* out of values--invalid code */ |
| else if (*p < s) |
| { |
| r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ |
| r.base = *p++; /* simple code is just the value */ |
| } |
| else |
| { |
| r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */ |
| r.base = d[*p++ - s]; |
| } |
| |
| /* fill code-like entries with r */ |
| f = 1 << (k - w); |
| for (j = i >> w; j < z; j += f) |
| q[j] = r; |
| |
| /* backwards increment the k-bit code i */ |
| for (j = 1 << (k - 1); i & j; j >>= 1) |
| i ^= j; |
| i ^= j; |
| |
| /* backup over finished tables */ |
| while ((i & ((1 << w) - 1)) != x[h]) |
| { |
| h--; /* don't need to update q */ |
| w -= l; |
| } |
| } |
| } |
| |
| |
| /* Return Z_BUF_ERROR if we were given an incomplete table */ |
| return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; |
| } |
| |
| |
| local int inflate_trees_bits( |
| uIntf *c, /* 19 code lengths */ |
| uIntf *bb, /* bits tree desired/actual depth */ |
| inflate_huft * FAR *tb, /* bits tree result */ |
| z_stream *z /* for zfree function */ |
| ) |
| { |
| int r; |
| |
| r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); |
| if (r == Z_DATA_ERROR) |
| z->msg = "oversubscribed dynamic bit lengths tree"; |
| else if (r == Z_BUF_ERROR) |
| { |
| inflate_trees_free(*tb, z); |
| z->msg = "incomplete dynamic bit lengths tree"; |
| r = Z_DATA_ERROR; |
| } |
| return r; |
| } |
| |
| |
| local int inflate_trees_dynamic( |
| uInt nl, /* number of literal/length codes */ |
| uInt nd, /* number of distance codes */ |
| uIntf *c, /* that many (total) code lengths */ |
| uIntf *bl, /* literal desired/actual bit depth */ |
| uIntf *bd, /* distance desired/actual bit depth */ |
| inflate_huft * FAR *tl, /* literal/length tree result */ |
| inflate_huft * FAR *td, /* distance tree result */ |
| z_stream *z /* for zfree function */ |
| ) |
| { |
| int r; |
| |
| /* build literal/length tree */ |
| if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK) |
| { |
| if (r == Z_DATA_ERROR) |
| z->msg = "oversubscribed literal/length tree"; |
| else if (r == Z_BUF_ERROR) |
| { |
| inflate_trees_free(*tl, z); |
| z->msg = "incomplete literal/length tree"; |
| r = Z_DATA_ERROR; |
| } |
| return r; |
| } |
| |
| /* build distance tree */ |
| if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK) |
| { |
| if (r == Z_DATA_ERROR) |
| z->msg = "oversubscribed literal/length tree"; |
| else if (r == Z_BUF_ERROR) { |
| #ifdef PKZIP_BUG_WORKAROUND |
| r = Z_OK; |
| } |
| #else |
| inflate_trees_free(*td, z); |
| z->msg = "incomplete literal/length tree"; |
| r = Z_DATA_ERROR; |
| } |
| inflate_trees_free(*tl, z); |
| return r; |
| #endif |
| } |
| |
| /* done */ |
| return Z_OK; |
| } |
| |
| |
| /* build fixed tables only once--keep them here */ |
| local int fixed_lock = 0; |
| local int fixed_built = 0; |
| #define FIXEDH 530 /* number of hufts used by fixed tables */ |
| local uInt fixed_left = FIXEDH; |
| local inflate_huft fixed_mem[FIXEDH]; |
| local uInt fixed_bl; |
| local uInt fixed_bd; |
| local inflate_huft *fixed_tl; |
| local inflate_huft *fixed_td; |
| |
| |
| local voidpf falloc( |
| voidpf q, /* opaque pointer (not used) */ |
| uInt n, /* number of items */ |
| uInt s /* size of item */ |
| ) |
| { |
| Assert(s == sizeof(inflate_huft) && n <= fixed_left, |
| "inflate_trees falloc overflow"); |
| if (q) s++; /* to make some compilers happy */ |
| fixed_left -= n; |
| return (voidpf)(fixed_mem + fixed_left); |
| } |
| |
| |
| local void ffree( |
| voidpf q, |
| voidpf p, |
| uInt n |
| ) |
| { |
| Assert(0, "inflate_trees ffree called!"); |
| if (q) q = p; /* to make some compilers happy */ |
| } |
| |
| |
| local int inflate_trees_fixed( |
| uIntf *bl, /* literal desired/actual bit depth */ |
| uIntf *bd, /* distance desired/actual bit depth */ |
| inflate_huft * FAR *tl, /* literal/length tree result */ |
| inflate_huft * FAR *td /* distance tree result */ |
| ) |
| { |
| /* build fixed tables if not built already--lock out other instances */ |
| while (++fixed_lock > 1) |
| fixed_lock--; |
| if (!fixed_built) |
| { |
| int k; /* temporary variable */ |
| unsigned c[288]; /* length list for huft_build */ |
| z_stream z; /* for falloc function */ |
| |
| /* set up fake z_stream for memory routines */ |
| z.zalloc = falloc; |
| z.zfree = ffree; |
| z.opaque = Z_NULL; |
| |
| /* literal table */ |
| for (k = 0; k < 144; k++) |
| c[k] = 8; |
| for (; k < 256; k++) |
| c[k] = 9; |
| for (; k < 280; k++) |
| c[k] = 7; |
| for (; k < 288; k++) |
| c[k] = 8; |
| fixed_bl = 7; |
| huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); |
| |
| /* distance table */ |
| for (k = 0; k < 30; k++) |
| c[k] = 5; |
| fixed_bd = 5; |
| huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); |
| |
| /* done */ |
| fixed_built = 1; |
| } |
| fixed_lock--; |
| *bl = fixed_bl; |
| *bd = fixed_bd; |
| *tl = fixed_tl; |
| *td = fixed_td; |
| return Z_OK; |
| } |
| |
| |
| local int inflate_trees_free( |
| inflate_huft *t, /* table to free */ |
| z_stream *z /* for zfree function */ |
| ) |
| /* Free the malloc'ed tables built by huft_build(), which makes a linked |
| list of the tables it made, with the links in a dummy first entry of |
| each table. */ |
| { |
| register inflate_huft *p, *q; |
| |
| /* Go through linked list, freeing from the malloced (t[-1]) address. */ |
| p = t; |
| while (p != Z_NULL) |
| { |
| q = (--p)->next; |
| ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft)); |
| p = q; |
| } |
| return Z_OK; |
| } |
| |
| /*+++++*/ |
| /* infcodes.c -- process literals and length/distance pairs |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* simplify the use of the inflate_huft type with some defines */ |
| #define base more.Base |
| #define next more.Next |
| #define exop word.what.Exop |
| #define bits word.what.Bits |
| |
| /* inflate codes private state */ |
| struct inflate_codes_state { |
| |
| /* mode */ |
| enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ |
| START, /* x: set up for LEN */ |
| LEN, /* i: get length/literal/eob next */ |
| LENEXT, /* i: getting length extra (have base) */ |
| DIST, /* i: get distance next */ |
| DISTEXT, /* i: getting distance extra */ |
| COPY, /* o: copying bytes in window, waiting for space */ |
| LIT, /* o: got literal, waiting for output space */ |
| WASH, /* o: got eob, possibly still output waiting */ |
| END, /* x: got eob and all data flushed */ |
| BADCODE} /* x: got error */ |
| mode; /* current inflate_codes mode */ |
| |
| /* mode dependent information */ |
| uInt len; |
| union { |
| struct { |
| inflate_huft *tree; /* pointer into tree */ |
| uInt need; /* bits needed */ |
| } code; /* if LEN or DIST, where in tree */ |
| uInt lit; /* if LIT, literal */ |
| struct { |
| uInt get; /* bits to get for extra */ |
| uInt dist; /* distance back to copy from */ |
| } copy; /* if EXT or COPY, where and how much */ |
| } sub; /* submode */ |
| |
| /* mode independent information */ |
| Byte lbits; /* ltree bits decoded per branch */ |
| Byte dbits; /* dtree bits decoder per branch */ |
| inflate_huft *ltree; /* literal/length/eob tree */ |
| inflate_huft *dtree; /* distance tree */ |
| |
| }; |
| |
| |
| local inflate_codes_statef *inflate_codes_new( |
| uInt bl, |
| uInt bd, |
| inflate_huft *tl, |
| inflate_huft *td, |
| z_stream *z |
| ) |
| { |
| inflate_codes_statef *c; |
| |
| if ((c = (inflate_codes_statef *) |
| ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) |
| { |
| c->mode = START; |
| c->lbits = (Byte)bl; |
| c->dbits = (Byte)bd; |
| c->ltree = tl; |
| c->dtree = td; |
| Tracev((stderr, "inflate: codes new\n")); |
| } |
| return c; |
| } |
| |
| |
| local int inflate_codes( |
| inflate_blocks_statef *s, |
| z_stream *z, |
| int r |
| ) |
| { |
| uInt j; /* temporary storage */ |
| inflate_huft *t; /* temporary pointer */ |
| uInt e; /* extra bits or operation */ |
| uLong b; /* bit buffer */ |
| uInt k; /* bits in bit buffer */ |
| Bytef *p; /* input data pointer */ |
| uInt n; /* bytes available there */ |
| Bytef *q; /* output window write pointer */ |
| uInt m; /* bytes to end of window or read pointer */ |
| Bytef *f; /* pointer to copy strings from */ |
| inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ |
| |
| /* copy input/output information to locals (UPDATE macro restores) */ |
| LOAD |
| |
| /* process input and output based on current state */ |
| while (1) switch (c->mode) |
| { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ |
| case START: /* x: set up for LEN */ |
| #ifndef SLOW |
| if (m >= 258 && n >= 10) |
| { |
| UPDATE |
| r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); |
| LOAD |
| if (r != Z_OK) |
| { |
| c->mode = r == Z_STREAM_END ? WASH : BADCODE; |
| break; |
| } |
| } |
| #endif /* !SLOW */ |
| c->sub.code.need = c->lbits; |
| c->sub.code.tree = c->ltree; |
| c->mode = LEN; |
| case LEN: /* i: get length/literal/eob next */ |
| j = c->sub.code.need; |
| NEEDBITS(j) |
| t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); |
| DUMPBITS(t->bits) |
| e = (uInt)(t->exop); |
| if (e == 0) /* literal */ |
| { |
| c->sub.lit = t->base; |
| Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? |
| "inflate: literal '%c'\n" : |
| "inflate: literal 0x%02x\n", t->base)); |
| c->mode = LIT; |
| break; |
| } |
| if (e & 16) /* length */ |
| { |
| c->sub.copy.get = e & 15; |
| c->len = t->base; |
| c->mode = LENEXT; |
| break; |
| } |
| if ((e & 64) == 0) /* next table */ |
| { |
| c->sub.code.need = e; |
| c->sub.code.tree = t->next; |
| break; |
| } |
| if (e & 32) /* end of block */ |
| { |
| Tracevv((stderr, "inflate: end of block\n")); |
| c->mode = WASH; |
| break; |
| } |
| c->mode = BADCODE; /* invalid code */ |
| z->msg = "invalid literal/length code"; |
| r = Z_DATA_ERROR; |
| LEAVE |
| case LENEXT: /* i: getting length extra (have base) */ |
| j = c->sub.copy.get; |
| NEEDBITS(j) |
| c->len += (uInt)b & inflate_mask[j]; |
| DUMPBITS(j) |
| c->sub.code.need = c->dbits; |
| c->sub.code.tree = c->dtree; |
| Tracevv((stderr, "inflate: length %u\n", c->len)); |
| c->mode = DIST; |
| case DIST: /* i: get distance next */ |
| j = c->sub.code.need; |
| NEEDBITS(j) |
| t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); |
| DUMPBITS(t->bits) |
| e = (uInt)(t->exop); |
| if (e & 16) /* distance */ |
| { |
| c->sub.copy.get = e & 15; |
| c->sub.copy.dist = t->base; |
| c->mode = DISTEXT; |
| break; |
| } |
| if ((e & 64) == 0) /* next table */ |
| { |
| c->sub.code.need = e; |
| c->sub.code.tree = t->next; |
| break; |
| } |
| c->mode = BADCODE; /* invalid code */ |
| z->msg = "invalid distance code"; |
| r = Z_DATA_ERROR; |
| LEAVE |
| case DISTEXT: /* i: getting distance extra */ |
| j = c->sub.copy.get; |
| NEEDBITS(j) |
| c->sub.copy.dist += (uInt)b & inflate_mask[j]; |
| DUMPBITS(j) |
| Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); |
| c->mode = COPY; |
| case COPY: /* o: copying bytes in window, waiting for space */ |
| #ifndef __TURBOC__ /* Turbo C bug for following expression */ |
| f = (uInt)(q - s->window) < c->sub.copy.dist ? |
| s->end - (c->sub.copy.dist - (q - s->window)) : |
| q - c->sub.copy.dist; |
| #else |
| f = q - c->sub.copy.dist; |
| if ((uInt)(q - s->window) < c->sub.copy.dist) |
| f = s->end - (c->sub.copy.dist - (q - s->window)); |
| #endif |
| while (c->len) |
| { |
| NEEDOUT |
| OUTBYTE(*f++) |
| if (f == s->end) |
| f = s->window; |
| c->len--; |
| } |
| c->mode = START; |
| break; |
| case LIT: /* o: got literal, waiting for output space */ |
| NEEDOUT |
| OUTBYTE(c->sub.lit) |
| c->mode = START; |
| break; |
| case WASH: /* o: got eob, possibly more output */ |
| FLUSH |
| if (s->read != s->write) |
| LEAVE |
| c->mode = END; |
| case END: |
| r = Z_STREAM_END; |
| LEAVE |
| case BADCODE: /* x: got error */ |
| r = Z_DATA_ERROR; |
| LEAVE |
| default: |
| r = Z_STREAM_ERROR; |
| LEAVE |
| } |
| } |
| |
| |
| local void inflate_codes_free( |
| inflate_codes_statef *c, |
| z_stream *z |
| ) |
| { |
| ZFREE(z, c, sizeof(struct inflate_codes_state)); |
| Tracev((stderr, "inflate: codes free\n")); |
| } |
| |
| /*+++++*/ |
| /* inflate_util.c -- data and routines common to blocks and codes |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* copy as much as possible from the sliding window to the output area */ |
| local int inflate_flush( |
| inflate_blocks_statef *s, |
| z_stream *z, |
| int r |
| ) |
| { |
| uInt n; |
| Bytef *p, *q; |
| |
| /* local copies of source and destination pointers */ |
| p = z->next_out; |
| q = s->read; |
| |
| /* compute number of bytes to copy as far as end of window */ |
| n = (uInt)((q <= s->write ? s->write : s->end) - q); |
| if (n > z->avail_out) n = z->avail_out; |
| if (n && r == Z_BUF_ERROR) r = Z_OK; |
| |
| /* update counters */ |
| z->avail_out -= n; |
| z->total_out += n; |
| |
| /* update check information */ |
| if (s->checkfn != Z_NULL) |
| s->check = (*s->checkfn)(s->check, q, n); |
| |
| /* copy as far as end of window */ |
| zmemcpy(p, q, n); |
| p += n; |
| q += n; |
| |
| /* see if more to copy at beginning of window */ |
| if (q == s->end) |
| { |
| /* wrap pointers */ |
| q = s->window; |
| if (s->write == s->end) |
| s->write = s->window; |
| |
| /* compute bytes to copy */ |
| n = (uInt)(s->write - q); |
| if (n > z->avail_out) n = z->avail_out; |
| if (n && r == Z_BUF_ERROR) r = Z_OK; |
| |
| /* update counters */ |
| z->avail_out -= n; |
| z->total_out += n; |
| |
| /* update check information */ |
| if (s->checkfn != Z_NULL) |
| s->check = (*s->checkfn)(s->check, q, n); |
| |
| /* copy */ |
| zmemcpy(p, q, n); |
| p += n; |
| q += n; |
| } |
| |
| /* update pointers */ |
| z->next_out = p; |
| s->read = q; |
| |
| /* done */ |
| return r; |
| } |
| |
| |
| /*+++++*/ |
| /* inffast.c -- process literals and length/distance pairs fast |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* simplify the use of the inflate_huft type with some defines */ |
| #define base more.Base |
| #define next more.Next |
| #define exop word.what.Exop |
| #define bits word.what.Bits |
| |
| /* macros for bit input with no checking and for returning unused bytes */ |
| #define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}} |
| #define UNGRAB {n+=(c=k>>3);p-=c;k&=7;} |
| |
| /* Called with number of bytes left to write in window at least 258 |
| (the maximum string length) and number of input bytes available |
| at least ten. The ten bytes are six bytes for the longest length/ |
| distance pair plus four bytes for overloading the bit buffer. */ |
| |
| local int inflate_fast( |
| uInt bl, |
| uInt bd, |
| inflate_huft *tl, |
| inflate_huft *td, |
| inflate_blocks_statef *s, |
| z_stream *z |
| ) |
| { |
| inflate_huft *t; /* temporary pointer */ |
| uInt e; /* extra bits or operation */ |
| uLong b; /* bit buffer */ |
| uInt k; /* bits in bit buffer */ |
| Bytef *p; /* input data pointer */ |
| uInt n; /* bytes available there */ |
| Bytef *q; /* output window write pointer */ |
| uInt m; /* bytes to end of window or read pointer */ |
| uInt ml; /* mask for literal/length tree */ |
| uInt md; /* mask for distance tree */ |
| uInt c; /* bytes to copy */ |
| uInt d; /* distance back to copy from */ |
| Bytef *r; /* copy source pointer */ |
| |
| /* load input, output, bit values */ |
| LOAD |
| |
| /* initialize masks */ |
| ml = inflate_mask[bl]; |
| md = inflate_mask[bd]; |
| |
| /* do until not enough input or output space for fast loop */ |
| do { /* assume called with m >= 258 && n >= 10 */ |
| /* get literal/length code */ |
| GRABBITS(20) /* max bits for literal/length code */ |
| if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) |
| { |
| DUMPBITS(t->bits) |
| Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? |
| "inflate: * literal '%c'\n" : |
| "inflate: * literal 0x%02x\n", t->base)); |
| *q++ = (Byte)t->base; |
| m--; |
| continue; |
| } |
| do { |
| DUMPBITS(t->bits) |
| if (e & 16) |
| { |
| /* get extra bits for length */ |
| e &= 15; |
| c = t->base + ((uInt)b & inflate_mask[e]); |
| DUMPBITS(e) |
| Tracevv((stderr, "inflate: * length %u\n", c)); |
| |
| /* decode distance base of block to copy */ |
| GRABBITS(15); /* max bits for distance code */ |
| e = (t = td + ((uInt)b & md))->exop; |
| do { |
| DUMPBITS(t->bits) |
| if (e & 16) |
| { |
| /* get extra bits to add to distance base */ |
| e &= 15; |
| GRABBITS(e) /* get extra bits (up to 13) */ |
| d = t->base + ((uInt)b & inflate_mask[e]); |
| DUMPBITS(e) |
| Tracevv((stderr, "inflate: * distance %u\n", d)); |
| |
| /* do the copy */ |
| m -= c; |
| if ((uInt)(q - s->window) >= d) /* offset before dest */ |
| { /* just copy */ |
| r = q - d; |
| *q++ = *r++; c--; /* minimum count is three, */ |
| *q++ = *r++; c--; /* so unroll loop a little */ |
| } |
| else /* else offset after destination */ |
| { |
| e = d - (q - s->window); /* bytes from offset to end */ |
| r = s->end - e; /* pointer to offset */ |
| if (c > e) /* if source crosses, */ |
| { |
| c -= e; /* copy to end of window */ |
| do { |
| *q++ = *r++; |
| } while (--e); |
| r = s->window; /* copy rest from start of window */ |
| } |
| } |
| do { /* copy all or what's left */ |
| *q++ = *r++; |
| } while (--c); |
| break; |
| } |
| else if ((e & 64) == 0) |
| e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; |
| else |
| { |
| z->msg = "invalid distance code"; |
| UNGRAB |
| UPDATE |
| return Z_DATA_ERROR; |
| } |
| } while (1); |
| break; |
| } |
| if ((e & 64) == 0) |
| { |
| if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) |
| { |
| DUMPBITS(t->bits) |
| Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? |
| "inflate: * literal '%c'\n" : |
| "inflate: * literal 0x%02x\n", t->base)); |
| *q++ = (Byte)t->base; |
| m--; |
| break; |
| } |
| } |
| else if (e & 32) |
| { |
| Tracevv((stderr, "inflate: * end of block\n")); |
| UNGRAB |
| UPDATE |
| return Z_STREAM_END; |
| } |
| else |
| { |
| z->msg = "invalid literal/length code"; |
| UNGRAB |
| UPDATE |
| return Z_DATA_ERROR; |
| } |
| } while (1); |
| } while (m >= 258 && n >= 10); |
| |
| /* not enough input or output--restore pointers and return */ |
| UNGRAB |
| UPDATE |
| return Z_OK; |
| } |
| |
| |
| /*+++++*/ |
| /* zutil.c -- target dependent utility functions for the compression library |
| * Copyright (C) 1995 Jean-loup Gailly. |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */ |
| |
| char *zlib_version = ZLIB_VERSION; |
| |
| char *z_errmsg[] = { |
| "stream end", /* Z_STREAM_END 1 */ |
| "", /* Z_OK 0 */ |
| "file error", /* Z_ERRNO (-1) */ |
| "stream error", /* Z_STREAM_ERROR (-2) */ |
| "data error", /* Z_DATA_ERROR (-3) */ |
| "insufficient memory", /* Z_MEM_ERROR (-4) */ |
| "buffer error", /* Z_BUF_ERROR (-5) */ |
| ""}; |
| |
| |
| /*+++++*/ |
| /* adler32.c -- compute the Adler-32 checksum of a data stream |
| * Copyright (C) 1995 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| /* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */ |
| |
| #define BASE 65521L /* largest prime smaller than 65536 */ |
| #define NMAX 5552 |
| /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ |
| |
| #define DO1(buf) {s1 += *buf++; s2 += s1;} |
| #define DO2(buf) DO1(buf); DO1(buf); |
| #define DO4(buf) DO2(buf); DO2(buf); |
| #define DO8(buf) DO4(buf); DO4(buf); |
| #define DO16(buf) DO8(buf); DO8(buf); |
| |
| /* ========================================================================= */ |
| uLong adler32( |
| uLong adler, |
| Bytef *buf, |
| uInt len |
| ) |
| { |
| unsigned long s1 = adler & 0xffff; |
| unsigned long s2 = (adler >> 16) & 0xffff; |
| int k; |
| |
| if (buf == Z_NULL) return 1L; |
| |
| while (len > 0) { |
| k = len < NMAX ? len : NMAX; |
| len -= k; |
| while (k >= 16) { |
| DO16(buf); |
| k -= 16; |
| } |
| if (k != 0) do { |
| DO1(buf); |
| } while (--k); |
| s1 %= BASE; |
| s2 %= BASE; |
| } |
| return (s2 << 16) | s1; |
| } |