| /* |
| * arch/ppc/platforms/adir_setup.c |
| * |
| * Board setup routines for SBS Adirondack |
| * |
| * By Michael Sokolov <msokolov@ivan.Harhan.ORG> |
| * based on the K2 version by Matt Porter <mporter@mvista.com> |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/reboot.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/types.h> |
| #include <linux/major.h> |
| #include <linux/initrd.h> |
| #include <linux/console.h> |
| #include <linux/delay.h> |
| #include <linux/ide.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| |
| #include <asm/system.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/dma.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/time.h> |
| #include <asm/todc.h> |
| #include <asm/bootinfo.h> |
| |
| #include "adir.h" |
| |
| extern void adir_init_IRQ(void); |
| extern int adir_get_irq(struct pt_regs *); |
| extern void adir_find_bridges(void); |
| extern unsigned long loops_per_jiffy; |
| |
| static unsigned int cpu_750cx[16] = { |
| 5, 15, 14, 0, 4, 13, 0, 9, 6, 11, 8, 10, 16, 12, 7, 0 |
| }; |
| |
| static int |
| adir_get_bus_speed(void) |
| { |
| if (!(*((u_char *) ADIR_CLOCK_REG) & ADIR_CLOCK_REG_SEL133)) |
| return 100000000; |
| else |
| return 133333333; |
| } |
| |
| static int |
| adir_get_cpu_speed(void) |
| { |
| unsigned long hid1; |
| int cpu_speed; |
| |
| hid1 = mfspr(SPRN_HID1) >> 28; |
| |
| hid1 = cpu_750cx[hid1]; |
| |
| cpu_speed = adir_get_bus_speed()*hid1/2; |
| return cpu_speed; |
| } |
| |
| static void __init |
| adir_calibrate_decr(void) |
| { |
| int freq, divisor = 4; |
| |
| /* determine processor bus speed */ |
| freq = adir_get_bus_speed(); |
| tb_ticks_per_jiffy = freq / HZ / divisor; |
| tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); |
| } |
| |
| static int |
| adir_show_cpuinfo(struct seq_file *m) |
| { |
| seq_printf(m, "vendor\t\t: SBS\n"); |
| seq_printf(m, "machine\t\t: Adirondack\n"); |
| seq_printf(m, "cpu speed\t: %dMhz\n", adir_get_cpu_speed()/1000000); |
| seq_printf(m, "bus speed\t: %dMhz\n", adir_get_bus_speed()/1000000); |
| seq_printf(m, "memory type\t: SDRAM\n"); |
| |
| return 0; |
| } |
| |
| extern char cmd_line[]; |
| |
| TODC_ALLOC(); |
| |
| static void __init |
| adir_setup_arch(void) |
| { |
| unsigned int cpu; |
| |
| /* Setup TODC access */ |
| TODC_INIT(TODC_TYPE_MC146818, ADIR_NVRAM_RTC_ADDR, 0, |
| ADIR_NVRAM_RTC_DATA, 8); |
| |
| /* init to some ~sane value until calibrate_delay() runs */ |
| loops_per_jiffy = 50000000/HZ; |
| |
| /* Setup PCI host bridges */ |
| adir_find_bridges(); |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (initrd_start) |
| ROOT_DEV = Root_RAM0; |
| else |
| #endif |
| #ifdef CONFIG_ROOT_NFS |
| ROOT_DEV = Root_NFS; |
| #else |
| ROOT_DEV = Root_SDA1; |
| #endif |
| |
| /* Identify the system */ |
| printk("System Identification: SBS Adirondack - PowerPC 750CXe @ %d Mhz\n", adir_get_cpu_speed()/1000000); |
| printk("SBS Adirondack port (C) 2001 SBS Technologies, Inc.\n"); |
| |
| /* Identify the CPU manufacturer */ |
| cpu = mfspr(SPRN_PVR); |
| printk("CPU manufacturer: IBM [rev=%04x]\n", (cpu & 0xffff)); |
| } |
| |
| static void |
| adir_restart(char *cmd) |
| { |
| local_irq_disable(); |
| /* SRR0 has system reset vector, SRR1 has default MSR value */ |
| /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ |
| __asm__ __volatile__ |
| ("lis 3,0xfff0\n\t" |
| "ori 3,3,0x0100\n\t" |
| "mtspr 26,3\n\t" |
| "li 3,0\n\t" |
| "mtspr 27,3\n\t" |
| "rfi\n\t"); |
| for(;;); |
| } |
| |
| static void |
| adir_power_off(void) |
| { |
| for(;;); |
| } |
| |
| static void |
| adir_halt(void) |
| { |
| adir_restart(NULL); |
| } |
| |
| static unsigned long __init |
| adir_find_end_of_memory(void) |
| { |
| return boot_mem_size; |
| } |
| |
| static void __init |
| adir_map_io(void) |
| { |
| io_block_mapping(ADIR_PCI32_VIRT_IO_BASE, ADIR_PCI32_IO_BASE, |
| ADIR_PCI32_VIRT_IO_SIZE, _PAGE_IO); |
| io_block_mapping(ADIR_PCI64_VIRT_IO_BASE, ADIR_PCI64_IO_BASE, |
| ADIR_PCI64_VIRT_IO_SIZE, _PAGE_IO); |
| } |
| |
| void __init |
| platform_init(unsigned long r3, unsigned long r4, unsigned long r5, |
| unsigned long r6, unsigned long r7) |
| { |
| /* |
| * On the Adirondack we use bi_recs and pass the pointer to them in R3. |
| */ |
| parse_bootinfo((struct bi_record *) (r3 + KERNELBASE)); |
| |
| /* Remember, isa_io_base is virtual but isa_mem_base is physical! */ |
| isa_io_base = ADIR_PCI32_VIRT_IO_BASE; |
| isa_mem_base = ADIR_PCI32_MEM_BASE; |
| pci_dram_offset = ADIR_PCI_SYS_MEM_BASE; |
| |
| ppc_md.setup_arch = adir_setup_arch; |
| ppc_md.show_cpuinfo = adir_show_cpuinfo; |
| ppc_md.irq_canonicalize = NULL; |
| ppc_md.init_IRQ = adir_init_IRQ; |
| ppc_md.get_irq = adir_get_irq; |
| ppc_md.init = NULL; |
| |
| ppc_md.find_end_of_memory = adir_find_end_of_memory; |
| ppc_md.setup_io_mappings = adir_map_io; |
| |
| ppc_md.restart = adir_restart; |
| ppc_md.power_off = adir_power_off; |
| ppc_md.halt = adir_halt; |
| |
| ppc_md.time_init = todc_time_init; |
| ppc_md.set_rtc_time = todc_set_rtc_time; |
| ppc_md.get_rtc_time = todc_get_rtc_time; |
| ppc_md.nvram_read_val = todc_mc146818_read_val; |
| ppc_md.nvram_write_val = todc_mc146818_write_val; |
| ppc_md.calibrate_decr = adir_calibrate_decr; |
| } |