| /***************************************************************************/ |
| |
| /* |
| * linux/arch/m68knommu/platform/5307/config.c |
| * |
| * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) |
| * Copyright (C) 2000, Lineo (www.lineo.com) |
| */ |
| |
| /***************************************************************************/ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/param.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <asm/irq.h> |
| #include <asm/dma.h> |
| #include <asm/traps.h> |
| #include <asm/machdep.h> |
| #include <asm/coldfire.h> |
| #include <asm/mcftimer.h> |
| #include <asm/mcfsim.h> |
| #include <asm/mcfdma.h> |
| #include <asm/mcfwdebug.h> |
| |
| /***************************************************************************/ |
| |
| void coldfire_tick(void); |
| void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); |
| unsigned long coldfire_timer_offset(void); |
| void coldfire_trap_init(void); |
| void coldfire_reset(void); |
| |
| extern unsigned int mcf_timervector; |
| extern unsigned int mcf_profilevector; |
| extern unsigned int mcf_timerlevel; |
| |
| /***************************************************************************/ |
| |
| /* |
| * Some platforms need software versions of the GPIO data registers. |
| */ |
| unsigned short ppdata; |
| unsigned char ledbank = 0xff; |
| |
| /***************************************************************************/ |
| |
| /* |
| * DMA channel base address table. |
| */ |
| unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = { |
| MCF_MBAR + MCFDMA_BASE0, |
| MCF_MBAR + MCFDMA_BASE1, |
| MCF_MBAR + MCFDMA_BASE2, |
| MCF_MBAR + MCFDMA_BASE3, |
| }; |
| |
| unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; |
| |
| /***************************************************************************/ |
| |
| void mcf_autovector(unsigned int vec) |
| { |
| volatile unsigned char *mbar; |
| |
| if ((vec >= 25) && (vec <= 31)) { |
| mbar = (volatile unsigned char *) MCF_MBAR; |
| vec = 0x1 << (vec - 24); |
| *(mbar + MCFSIM_AVR) |= vec; |
| mcf_setimr(mcf_getimr() & ~vec); |
| } |
| } |
| |
| /***************************************************************************/ |
| |
| void mcf_settimericr(unsigned int timer, unsigned int level) |
| { |
| volatile unsigned char *icrp; |
| unsigned int icr, imr; |
| |
| if (timer <= 2) { |
| switch (timer) { |
| case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; |
| default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; |
| } |
| |
| icrp = (volatile unsigned char *) (MCF_MBAR + icr); |
| *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; |
| mcf_setimr(mcf_getimr() & ~imr); |
| } |
| } |
| |
| /***************************************************************************/ |
| |
| int mcf_timerirqpending(int timer) |
| { |
| unsigned int imr = 0; |
| |
| switch (timer) { |
| case 1: imr = MCFSIM_IMR_TIMER1; break; |
| case 2: imr = MCFSIM_IMR_TIMER2; break; |
| default: break; |
| } |
| return (mcf_getipr() & imr); |
| } |
| |
| /***************************************************************************/ |
| |
| void config_BSP(char *commandp, int size) |
| { |
| mcf_setimr(MCFSIM_IMR_MASKALL); |
| |
| #if defined(CONFIG_BOOTPARAM) |
| strncpy(commandp, CONFIG_BOOTPARAM_STRING, size); |
| commandp[size-1] = 0; |
| #elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ |
| defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \ |
| defined(CONFIG_CLEOPATRA) |
| /* Copy command line from FLASH to local buffer... */ |
| memcpy(commandp, (char *) 0xf0004000, size); |
| commandp[size-1] = 0; |
| /* Different timer setup - to prevent device clash */ |
| mcf_timervector = 30; |
| mcf_profilevector = 31; |
| mcf_timerlevel = 6; |
| #else |
| memset(commandp, 0, size); |
| #endif |
| |
| mach_sched_init = coldfire_timer_init; |
| mach_tick = coldfire_tick; |
| mach_gettimeoffset = coldfire_timer_offset; |
| mach_trap_init = coldfire_trap_init; |
| mach_reset = coldfire_reset; |
| |
| #ifdef MCF_BDM_DISABLE |
| /* |
| * Disable the BDM clocking. This also turns off most of the rest of |
| * the BDM device. This is good for EMC reasons. This option is not |
| * incompatible with the memory protection option. |
| */ |
| wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK); |
| #endif |
| } |
| |
| /***************************************************************************/ |