| /* |
| * linux/arch/i386/kernel/irq.c |
| * |
| * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar |
| * |
| * This file contains the lowest level x86-specific interrupt |
| * entry, irq-stacks and irq statistics code. All the remaining |
| * irq logic is done by the generic kernel/irq/ code and |
| * by the x86-specific irq controller code. (e.g. i8259.c and |
| * io_apic.c.) |
| */ |
| |
| #include <asm/uaccess.h> |
| #include <linux/module.h> |
| #include <linux/seq_file.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel_stat.h> |
| |
| DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_maxaligned_in_smp; |
| EXPORT_PER_CPU_SYMBOL(irq_stat); |
| |
| #ifndef CONFIG_X86_LOCAL_APIC |
| /* |
| * 'what should we do if we get a hw irq event on an illegal vector'. |
| * each architecture has to answer this themselves. |
| */ |
| void ack_bad_irq(unsigned int irq) |
| { |
| printk("unexpected IRQ trap at vector %02x\n", irq); |
| } |
| #endif |
| |
| #ifdef CONFIG_4KSTACKS |
| /* |
| * per-CPU IRQ handling contexts (thread information and stack) |
| */ |
| union irq_ctx { |
| struct thread_info tinfo; |
| u32 stack[THREAD_SIZE/sizeof(u32)]; |
| }; |
| |
| static union irq_ctx *hardirq_ctx[NR_CPUS]; |
| static union irq_ctx *softirq_ctx[NR_CPUS]; |
| #endif |
| |
| /* |
| * do_IRQ handles all normal device IRQ's (the special |
| * SMP cross-CPU interrupts have their own specific |
| * handlers). |
| */ |
| fastcall unsigned int do_IRQ(struct pt_regs *regs) |
| { |
| /* high bits used in ret_from_ code */ |
| int irq = regs->orig_eax & 0xff; |
| #ifdef CONFIG_4KSTACKS |
| union irq_ctx *curctx, *irqctx; |
| u32 *isp; |
| #endif |
| |
| irq_enter(); |
| #ifdef CONFIG_DEBUG_STACKOVERFLOW |
| /* Debugging check for stack overflow: is there less than 1KB free? */ |
| { |
| long esp; |
| |
| __asm__ __volatile__("andl %%esp,%0" : |
| "=r" (esp) : "0" (THREAD_SIZE - 1)); |
| if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) { |
| printk("do_IRQ: stack overflow: %ld\n", |
| esp - sizeof(struct thread_info)); |
| dump_stack(); |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_4KSTACKS |
| |
| curctx = (union irq_ctx *) current_thread_info(); |
| irqctx = hardirq_ctx[smp_processor_id()]; |
| |
| /* |
| * this is where we switch to the IRQ stack. However, if we are |
| * already using the IRQ stack (because we interrupted a hardirq |
| * handler) we can't do that and just have to keep using the |
| * current stack (which is the irq stack already after all) |
| */ |
| if (curctx != irqctx) { |
| int arg1, arg2, ebx; |
| |
| /* build the stack frame on the IRQ stack */ |
| isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); |
| irqctx->tinfo.task = curctx->tinfo.task; |
| irqctx->tinfo.previous_esp = current_stack_pointer; |
| |
| asm volatile( |
| " xchgl %%ebx,%%esp \n" |
| " call __do_IRQ \n" |
| " movl %%ebx,%%esp \n" |
| : "=a" (arg1), "=d" (arg2), "=b" (ebx) |
| : "0" (irq), "1" (regs), "2" (isp) |
| : "memory", "cc", "ecx" |
| ); |
| } else |
| #endif |
| __do_IRQ(irq, regs); |
| |
| irq_exit(); |
| |
| return 1; |
| } |
| |
| #ifdef CONFIG_4KSTACKS |
| |
| /* |
| * These should really be __section__(".bss.page_aligned") as well, but |
| * gcc's 3.0 and earlier don't handle that correctly. |
| */ |
| static char softirq_stack[NR_CPUS * THREAD_SIZE] |
| __attribute__((__aligned__(THREAD_SIZE))); |
| |
| static char hardirq_stack[NR_CPUS * THREAD_SIZE] |
| __attribute__((__aligned__(THREAD_SIZE))); |
| |
| /* |
| * allocate per-cpu stacks for hardirq and for softirq processing |
| */ |
| void irq_ctx_init(int cpu) |
| { |
| union irq_ctx *irqctx; |
| |
| if (hardirq_ctx[cpu]) |
| return; |
| |
| irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; |
| irqctx->tinfo.task = NULL; |
| irqctx->tinfo.exec_domain = NULL; |
| irqctx->tinfo.cpu = cpu; |
| irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); |
| |
| hardirq_ctx[cpu] = irqctx; |
| |
| irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; |
| irqctx->tinfo.task = NULL; |
| irqctx->tinfo.exec_domain = NULL; |
| irqctx->tinfo.cpu = cpu; |
| irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET; |
| irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); |
| |
| softirq_ctx[cpu] = irqctx; |
| |
| printk("CPU %u irqstacks, hard=%p soft=%p\n", |
| cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); |
| } |
| |
| extern asmlinkage void __do_softirq(void); |
| |
| asmlinkage void do_softirq(void) |
| { |
| unsigned long flags; |
| struct thread_info *curctx; |
| union irq_ctx *irqctx; |
| u32 *isp; |
| |
| if (in_interrupt()) |
| return; |
| |
| local_irq_save(flags); |
| |
| if (local_softirq_pending()) { |
| curctx = current_thread_info(); |
| irqctx = softirq_ctx[smp_processor_id()]; |
| irqctx->tinfo.task = curctx->task; |
| irqctx->tinfo.previous_esp = current_stack_pointer; |
| |
| /* build the stack frame on the softirq stack */ |
| isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); |
| |
| asm volatile( |
| " xchgl %%ebx,%%esp \n" |
| " call __do_softirq \n" |
| " movl %%ebx,%%esp \n" |
| : "=b"(isp) |
| : "0"(isp) |
| : "memory", "cc", "edx", "ecx", "eax" |
| ); |
| } |
| |
| local_irq_restore(flags); |
| } |
| |
| EXPORT_SYMBOL(do_softirq); |
| #endif |
| |
| /* |
| * Interrupt statistics: |
| */ |
| |
| atomic_t irq_err_count; |
| |
| /* |
| * /proc/interrupts printing: |
| */ |
| |
| int show_interrupts(struct seq_file *p, void *v) |
| { |
| int i = *(loff_t *) v, j; |
| struct irqaction * action; |
| unsigned long flags; |
| |
| if (i == 0) { |
| seq_printf(p, " "); |
| for (j=0; j<NR_CPUS; j++) |
| if (cpu_online(j)) |
| seq_printf(p, "CPU%d ",j); |
| seq_putc(p, '\n'); |
| } |
| |
| if (i < NR_IRQS) { |
| spin_lock_irqsave(&irq_desc[i].lock, flags); |
| action = irq_desc[i].action; |
| if (!action) |
| goto skip; |
| seq_printf(p, "%3d: ",i); |
| #ifndef CONFIG_SMP |
| seq_printf(p, "%10u ", kstat_irqs(i)); |
| #else |
| for (j = 0; j < NR_CPUS; j++) |
| if (cpu_online(j)) |
| seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); |
| #endif |
| seq_printf(p, " %14s", irq_desc[i].handler->typename); |
| seq_printf(p, " %s", action->name); |
| |
| for (action=action->next; action; action = action->next) |
| seq_printf(p, ", %s", action->name); |
| |
| seq_putc(p, '\n'); |
| skip: |
| spin_unlock_irqrestore(&irq_desc[i].lock, flags); |
| } else if (i == NR_IRQS) { |
| seq_printf(p, "NMI: "); |
| for (j = 0; j < NR_CPUS; j++) |
| if (cpu_online(j)) |
| seq_printf(p, "%10u ", nmi_count(j)); |
| seq_putc(p, '\n'); |
| #ifdef CONFIG_X86_LOCAL_APIC |
| seq_printf(p, "LOC: "); |
| for (j = 0; j < NR_CPUS; j++) |
| if (cpu_online(j)) |
| seq_printf(p, "%10u ", |
| per_cpu(irq_stat,j).apic_timer_irqs); |
| seq_putc(p, '\n'); |
| #endif |
| seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); |
| #if defined(CONFIG_X86_IO_APIC) |
| seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); |
| #endif |
| } |
| return 0; |
| } |