| /* |
| * linux/arch/arm/mach-pxa/generic.c |
| * |
| * Author: Nicolas Pitre |
| * Created: Jun 15, 2001 |
| * Copyright: MontaVista Software Inc. |
| * |
| * Code common to all PXA machines. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Since this file should be linked before any other machine specific file, |
| * the __initcall() here will be executed first. This serves as default |
| * initialization stuff for PXA machines which can be overridden later if |
| * need be. |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/ioport.h> |
| #include <linux/pm.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| #include <asm/pgtable.h> |
| #include <asm/mach/map.h> |
| |
| #include <asm/arch/pxa-regs.h> |
| #include <asm/arch/udc.h> |
| #include <asm/arch/pxafb.h> |
| #include <asm/arch/mmc.h> |
| |
| #include "generic.h" |
| |
| /* |
| * Handy function to set GPIO alternate functions |
| */ |
| |
| void pxa_gpio_mode(int gpio_mode) |
| { |
| unsigned long flags; |
| int gpio = gpio_mode & GPIO_MD_MASK_NR; |
| int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; |
| int gafr; |
| |
| local_irq_save(flags); |
| if (gpio_mode & GPIO_DFLT_LOW) |
| GPCR(gpio) = GPIO_bit(gpio); |
| else if (gpio_mode & GPIO_DFLT_HIGH) |
| GPSR(gpio) = GPIO_bit(gpio); |
| if (gpio_mode & GPIO_MD_MASK_DIR) |
| GPDR(gpio) |= GPIO_bit(gpio); |
| else |
| GPDR(gpio) &= ~GPIO_bit(gpio); |
| gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2)); |
| GAFR(gpio) = gafr | (fn << (((gpio) & 0xf)*2)); |
| local_irq_restore(flags); |
| } |
| |
| EXPORT_SYMBOL(pxa_gpio_mode); |
| |
| /* |
| * Routine to safely enable or disable a clock in the CKEN |
| */ |
| void pxa_set_cken(int clock, int enable) |
| { |
| unsigned long flags; |
| local_irq_save(flags); |
| |
| if (enable) |
| CKEN |= clock; |
| else |
| CKEN &= ~clock; |
| |
| local_irq_restore(flags); |
| } |
| |
| EXPORT_SYMBOL(pxa_set_cken); |
| |
| /* |
| * Intel PXA2xx internal register mapping. |
| * |
| * Note 1: not all PXA2xx variants implement all those addresses. |
| * |
| * Note 2: virtual 0xfffe0000-0xffffffff is reserved for the vector table |
| * and cache flush area. |
| */ |
| static struct map_desc standard_io_desc[] __initdata = { |
| /* virtual physical length type */ |
| { 0xf2000000, 0x40000000, 0x02000000, MT_DEVICE }, /* Devs */ |
| { 0xf4000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */ |
| { 0xf6000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */ |
| { 0xf8000000, 0x4c000000, 0x00100000, MT_DEVICE }, /* USB host */ |
| { 0xfa000000, 0x50000000, 0x00100000, MT_DEVICE }, /* Camera */ |
| { 0xfe000000, 0x58000000, 0x00100000, MT_DEVICE }, /* IMem ctl */ |
| { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE } /* UNCACHED_PHYS_0 */ |
| }; |
| |
| void __init pxa_map_io(void) |
| { |
| iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); |
| get_clk_frequency_khz(1); |
| } |
| |
| |
| static struct resource pxamci_resources[] = { |
| [0] = { |
| .start = 0x41100000, |
| .end = 0x41100fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_MMC, |
| .end = IRQ_MMC, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 pxamci_dmamask = 0xffffffffUL; |
| |
| static struct platform_device pxamci_device = { |
| .name = "pxa2xx-mci", |
| .id = -1, |
| .dev = { |
| .dma_mask = &pxamci_dmamask, |
| .coherent_dma_mask = 0xffffffff, |
| }, |
| .num_resources = ARRAY_SIZE(pxamci_resources), |
| .resource = pxamci_resources, |
| }; |
| |
| void __init pxa_set_mci_info(struct pxamci_platform_data *info) |
| { |
| pxamci_device.dev.platform_data = info; |
| } |
| |
| |
| static struct pxa2xx_udc_mach_info pxa_udc_info; |
| |
| void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) |
| { |
| memcpy(&pxa_udc_info, info, sizeof *info); |
| } |
| |
| static struct resource pxa2xx_udc_resources[] = { |
| [0] = { |
| .start = 0x40600000, |
| .end = 0x4060ffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_USB, |
| .end = IRQ_USB, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 udc_dma_mask = ~(u32)0; |
| |
| static struct platform_device udc_device = { |
| .name = "pxa2xx-udc", |
| .id = -1, |
| .resource = pxa2xx_udc_resources, |
| .num_resources = ARRAY_SIZE(pxa2xx_udc_resources), |
| .dev = { |
| .platform_data = &pxa_udc_info, |
| .dma_mask = &udc_dma_mask, |
| } |
| }; |
| |
| static struct pxafb_mach_info pxa_fb_info; |
| |
| void __init set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info) |
| { |
| memcpy(&pxa_fb_info,hard_pxa_fb_info,sizeof(struct pxafb_mach_info)); |
| } |
| |
| static struct resource pxafb_resources[] = { |
| [0] = { |
| .start = 0x44000000, |
| .end = 0x4400ffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_LCD, |
| .end = IRQ_LCD, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static u64 fb_dma_mask = ~(u64)0; |
| |
| static struct platform_device pxafb_device = { |
| .name = "pxa2xx-fb", |
| .id = -1, |
| .dev = { |
| .platform_data = &pxa_fb_info, |
| .dma_mask = &fb_dma_mask, |
| .coherent_dma_mask = 0xffffffff, |
| }, |
| .num_resources = ARRAY_SIZE(pxafb_resources), |
| .resource = pxafb_resources, |
| }; |
| |
| static struct platform_device ffuart_device = { |
| .name = "pxa2xx-uart", |
| .id = 0, |
| }; |
| static struct platform_device btuart_device = { |
| .name = "pxa2xx-uart", |
| .id = 1, |
| }; |
| static struct platform_device stuart_device = { |
| .name = "pxa2xx-uart", |
| .id = 2, |
| }; |
| |
| static struct platform_device *devices[] __initdata = { |
| &pxamci_device, |
| &udc_device, |
| &pxafb_device, |
| &ffuart_device, |
| &btuart_device, |
| &stuart_device, |
| }; |
| |
| static int __init pxa_init(void) |
| { |
| return platform_add_devices(devices, ARRAY_SIZE(devices)); |
| } |
| |
| subsys_initcall(pxa_init); |